diff mbox series

[v3,2/3] Bluetooth: hci_h5: btrtl: Maintain flow control if wakeup is enabled

Message ID 20210723193137.v3.2.I404c6df9cdab270223c13e867396f440dd4b499d@changeid (mailing list archive)
State New, archived
Headers show
Series [v3,1/3] Bluetooth: hci_h5: add WAKEUP_DISABLE flag | expand

Commit Message

Archie Pusaka July 23, 2021, 11:31 a.m. UTC
From: Archie Pusaka <apusaka@chromium.org>

For chips that doesn't reset on suspend, we need to provide the correct
value of flow_control when it resumes. Therefore, store the flow
control value when reading from the config file to be reused upon
suspend.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Hilda Wu <hildawu@realtek.com>

---

(no changes since v1)

 drivers/bluetooth/hci_h5.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Marcel Holtmann July 23, 2021, 12:12 p.m. UTC | #1
Hi Archie,

> For chips that doesn't reset on suspend, we need to provide the correct
> value of flow_control when it resumes. Therefore, store the flow
> control value when reading from the config file to be reused upon
> suspend.
> 
> Signed-off-by: Archie Pusaka <apusaka@chromium.org>
> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> Reviewed-by: Hilda Wu <hildawu@realtek.com>
> 
> ---
> 
> (no changes since v1)
> 
> drivers/bluetooth/hci_h5.c | 8 ++++++++
> 1 file changed, 8 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index fd672111a048..cbc63b057f33 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -54,6 +54,7 @@  enum {
 	H5_RX_ESC,		/* SLIP escape mode */
 	H5_TX_ACK_REQ,		/* Pending ack to send */
 	H5_WAKEUP_DISABLE,	/* Device cannot wake host */
+	H5_HW_FLOW_CONTROL,	/* Use HW flow control */
 };
 
 struct h5 {
@@ -920,6 +921,9 @@  static int h5_btrtl_setup(struct h5 *h5)
 	serdev_device_set_baudrate(h5->hu->serdev, controller_baudrate);
 	serdev_device_set_flow_control(h5->hu->serdev, flow_control);
 
+	if (flow_control)
+		set_bit(H5_HW_FLOW_CONTROL, &h5->flags);
+
 	err = btrtl_download_firmware(h5->hu->hdev, btrtl_dev);
 	/* Give the device some time before the hci-core sends it a reset */
 	usleep_range(10000, 20000);
@@ -1012,7 +1016,11 @@  static int h5_btrtl_resume(struct h5 *h5)
 		queue_work(system_long_wq, &reprobe->work);
 	} else {
 		gpiod_set_value_cansleep(h5->device_wake_gpio, 1);
+
+		if (test_bit(H5_HW_FLOW_CONTROL, &h5->flags))
+			serdev_device_set_flow_control(h5->hu->serdev, true);
 	}
+
 	return 0;
 }