diff mbox series

[v13,2/5] dt-bindings: pinctrl: mt8195: change pull up/down description

Message ID 20210922025640.11600-3-zhiyong.tao@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Mediatek pinctrl patch on mt8195 | expand

Commit Message

zhiyong.tao Sept. 22, 2021, 2:56 a.m. UTC
For supporting SI units in "bias-pull-down" & "bias-pull-up",
Change pull up/down description

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
---
 .../bindings/pinctrl/pinctrl-mt8195.yaml      | 65 ++++++++++++++++++-
 1 file changed, 63 insertions(+), 2 deletions(-)

Comments

Rob Herring (Arm) Sept. 24, 2021, 1 a.m. UTC | #1
On Wed, Sep 22, 2021 at 10:56:37AM +0800, Zhiyong Tao wrote:
> For supporting SI units in "bias-pull-down" & "bias-pull-up",
> Change pull up/down description
> 
> Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> ---
>  .../bindings/pinctrl/pinctrl-mt8195.yaml      | 65 ++++++++++++++++++-
>  1 file changed, 63 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> index 2f12ec59eee5..2f2afabbe4fc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> @@ -85,9 +85,70 @@ patternProperties:
>            2/4/6/8/10/12/14/16mA in mt8195.
>          enum: [0, 1, 2, 3, 4, 5, 6, 7]
>  
> -      bias-pull-down: true
> +      bias-pull-down:
> +        description: |
> +          For pull down type is normal, it don't need add RSEL & R1R0 define
> +          and resistance value.
> +          For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
> +          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> +          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
> +          define in mt8195.
> +          For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
> +          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
> +          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> +          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
> +          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> +          define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195.

Please make a schema:

oneOf:
  - enum: [ 0, 1, ...7 ]
  - description: MT8195...
    enum: [ 5000, 75000 ]

> +          An example of using RSEL define:
> +          pincontroller {
> +            i2c0_pin {
> +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> +              bias-pull-down = <MTK_PULL_SET_RSEL_001>;
> +            };
> +          };
> +          An example of using si unit resistance value(ohm):
> +          &pio {
> +            mediatek,rsel_resistance_in_si_unit;
> +          }
> +          pincontroller {
> +            i2c0_pin {
> +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> +              bias-pull-down = <75000>;
> +            };
> +          };
>  
> -      bias-pull-up: true
> +      bias-pull-up:
> +        description: |
> +          For pull up type is normal, it don't need add RSEL & R1R0 define
> +          and resistance value.
> +          For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
> +          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> +          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
> +          define in mt8195.
> +          For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
> +          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
> +          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> +          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
> +          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> +          define in mt8195. It can also support resistance value(ohm)
> +          "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.

Same here.

> +          An example of using RSEL define:
> +          pincontroller {
> +            i2c0_pin {
> +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> +              bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> +            };
> +          };
> +          An example of using si unit resistance value(ohm):
> +          &pio {
> +            mediatek,rsel_resistance_in_si_unit;
> +          }
> +          pincontroller {
> +            i2c0_pin {
> +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> +              bias-pull-up = <1000>;
> +            };
> +          };
>  
>        bias-disable: true
>  
> -- 
> 2.25.1
> 
>
zhiyong.tao Sept. 24, 2021, 6:40 a.m. UTC | #2
On Thu, 2021-09-23 at 20:00 -0500, Rob Herring wrote:
> On Wed, Sep 22, 2021 at 10:56:37AM +0800, Zhiyong Tao wrote:
> > For supporting SI units in "bias-pull-down" & "bias-pull-up",
> > Change pull up/down description
> > 
> > Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> > ---
> >  .../bindings/pinctrl/pinctrl-mt8195.yaml      | 65
> > ++++++++++++++++++-
> >  1 file changed, 63 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-
> > mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-
> > mt8195.yaml
> > index 2f12ec59eee5..2f2afabbe4fc 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> > @@ -85,9 +85,70 @@ patternProperties:
> >            2/4/6/8/10/12/14/16mA in mt8195.
> >          enum: [0, 1, 2, 3, 4, 5, 6, 7]
> >  
> > -      bias-pull-down: true
> > +      bias-pull-down:
> > +        description: |
> > +          For pull down type is normal, it don't need add RSEL &
> > R1R0 define
> > +          and resistance value.
> > +          For pull down type is PUPD/R0/R1 type, it can add R1R0
> > define to
> > +          set different resistance. It can support
> > "MTK_PUPD_SET_R1R0_00" &
> > +          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > "MTK_PUPD_SET_R1R0_11"
> > +          define in mt8195.
> > +          For pull down type is RSEL, it can add RSEL define &
> > resistance value(ohm)
> > +          to set different resistance by identifying property
> > "mediatek,rsel_resistance_in_si_unit".
> > +          It can support "MTK_PULL_SET_RSEL_000" &
> > "MTK_PULL_SET_RSEL_001"
> > +          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > "MTK_PULL_SET_RSEL_100"
> > +          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> > "MTK_PULL_SET_RSEL_111"
> > +          define in mt8195. It can also support resistance
> > value(ohm) "75000" & "5000" in mt8195.
> 
> Please make a schema:
> 
> oneOf:
>   - enum: [ 0, 1, ...7 ]
>   - description: MT8195...
>     enum: [ 5000, 75000 ]
> 

we will add it in the next verison.

> > +          An example of using RSEL define:
> > +          pincontroller {
> > +            i2c0_pin {
> > +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > +              bias-pull-down = <MTK_PULL_SET_RSEL_001>;
> > +            };
> > +          };
> > +          An example of using si unit resistance value(ohm):
> > +          &pio {
> > +            mediatek,rsel_resistance_in_si_unit;
> > +          }
> > +          pincontroller {
> > +            i2c0_pin {
> > +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > +              bias-pull-down = <75000>;
> > +            };
> > +          };
> >  
> > -      bias-pull-up: true
> > +      bias-pull-up:
> > +        description: |
> > +          For pull up type is normal, it don't need add RSEL &
> > R1R0 define
> > +          and resistance value.
> > +          For pull up type is PUPD/R0/R1 type, it can add R1R0
> > define to
> > +          set different resistance. It can support
> > "MTK_PUPD_SET_R1R0_00" &
> > +          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > "MTK_PUPD_SET_R1R0_11"
> > +          define in mt8195.
> > +          For pull up type is RSEL, it can add RSEL define &
> > resistance value(ohm)
> > +          to set different resistance by identifying property
> > "mediatek,rsel_resistance_in_si_unit".
> > +          It can support "MTK_PULL_SET_RSEL_000" &
> > "MTK_PULL_SET_RSEL_001"
> > +          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > "MTK_PULL_SET_RSEL_100"
> > +          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> > "MTK_PULL_SET_RSEL_111"
> > +          define in mt8195. It can also support resistance
> > value(ohm)
> > +          "1000" & "1500" & "2000" & "3000" & "4000" & "5000" &
> > "10000" & "75000" in mt8195.
> 
> Same here.
> 
> > +          An example of using RSEL define:
> > +          pincontroller {
> > +            i2c0_pin {
> > +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > +              bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> > +            };
> > +          };
> > +          An example of using si unit resistance value(ohm):
> > +          &pio {
> > +            mediatek,rsel_resistance_in_si_unit;
> > +          }
> > +          pincontroller {
> > +            i2c0_pin {
> > +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > +              bias-pull-up = <1000>;
> > +            };
> > +          };
> >  
> >        bias-disable: true
> >  
> > -- 
> > 2.25.1
> > 
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index 2f12ec59eee5..2f2afabbe4fc 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -85,9 +85,70 @@  patternProperties:
           2/4/6/8/10/12/14/16mA in mt8195.
         enum: [0, 1, 2, 3, 4, 5, 6, 7]
 
-      bias-pull-down: true
+      bias-pull-down:
+        description: |
+          For pull down type is normal, it don't need add RSEL & R1R0 define
+          and resistance value.
+          For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+          define in mt8195.
+          For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
+          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
+          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+          define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195.
+          An example of using RSEL define:
+          pincontroller {
+            i2c0_pin {
+              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+              bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+            };
+          };
+          An example of using si unit resistance value(ohm):
+          &pio {
+            mediatek,rsel_resistance_in_si_unit;
+          }
+          pincontroller {
+            i2c0_pin {
+              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+              bias-pull-down = <75000>;
+            };
+          };
 
-      bias-pull-up: true
+      bias-pull-up:
+        description: |
+          For pull up type is normal, it don't need add RSEL & R1R0 define
+          and resistance value.
+          For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+          define in mt8195.
+          For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
+          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
+          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+          define in mt8195. It can also support resistance value(ohm)
+          "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.
+          An example of using RSEL define:
+          pincontroller {
+            i2c0_pin {
+              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+              bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+            };
+          };
+          An example of using si unit resistance value(ohm):
+          &pio {
+            mediatek,rsel_resistance_in_si_unit;
+          }
+          pincontroller {
+            i2c0_pin {
+              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+              bias-pull-up = <1000>;
+            };
+          };
 
       bias-disable: true