diff mbox series

[v2,1/3] dt-bindings: pinctrl: convert rockchip, pinctrl.txt to YAML

Message ID 20210930095225.9718-1-jbx6244@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/3] dt-bindings: pinctrl: convert rockchip, pinctrl.txt to YAML | expand

Commit Message

Johan Jonker Sept. 30, 2021, 9:52 a.m. UTC
Convert rockchip,pinctrl.txt to YAML

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V2:
   Add '|' to maintain the paragraphs.
   Change gpio patternProperties.
   Move description to items.
   Remove type array.
   Restyle
---
 .../bindings/pinctrl/rockchip,pinctrl.txt     | 114 ------------
 .../bindings/pinctrl/rockchip,pinctrl.yaml    | 176 ++++++++++++++++++
 2 files changed, 176 insertions(+), 114 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml

Comments

Rob Herring (Arm) Oct. 6, 2021, 9:07 p.m. UTC | #1
On Thu, Sep 30, 2021 at 11:52:23AM +0200, Johan Jonker wrote:
> Convert rockchip,pinctrl.txt to YAML
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> 
> Changed V2:
>    Add '|' to maintain the paragraphs.
>    Change gpio patternProperties.
>    Move description to items.
>    Remove type array.
>    Restyle
> ---
>  .../bindings/pinctrl/rockchip,pinctrl.txt     | 114 ------------
>  .../bindings/pinctrl/rockchip,pinctrl.yaml    | 176 ++++++++++++++++++
>  2 files changed, 176 insertions(+), 114 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
> deleted file mode 100644
> index 84c411129..000000000
> --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
> +++ /dev/null
> @@ -1,114 +0,0 @@
> -* Rockchip Pinmux Controller
> -
> -The Rockchip Pinmux Controller, enables the IC
> -to share one PAD to several functional blocks. The sharing is done by
> -multiplexing the PAD input/output signals. For each PAD there are several
> -muxing options with option 0 being the use as a GPIO.
> -
> -Please refer to pinctrl-bindings.txt in this directory for details of the
> -common pinctrl bindings used by client devices, including the meaning of the
> -phrase "pin configuration node".
> -
> -The Rockchip pin configuration node is a node of a group of pins which can be
> -used for a specific device or function. This node represents both mux and
> -config of the pins in that group. The 'pins' selects the function mode(also
> -named pin mode) this pin can work on and the 'config' configures various pad
> -settings such as pull-up, etc.
> -
> -The pins are grouped into up to 5 individual pin banks which need to be
> -defined as gpio sub-nodes of the pinmux controller.
> -
> -Required properties for iomux controller:
> -  - compatible: should be
> -		"rockchip,px30-pinctrl":    for Rockchip PX30
> -		"rockchip,rv1108-pinctrl":  for Rockchip RV1108
> -		"rockchip,rk2928-pinctrl":  for Rockchip RK2928
> -		"rockchip,rk3066a-pinctrl": for Rockchip RK3066a
> -		"rockchip,rk3066b-pinctrl": for Rockchip RK3066b
> -		"rockchip,rk3128-pinctrl":  for Rockchip RK3128
> -		"rockchip,rk3188-pinctrl":  for Rockchip RK3188
> -		"rockchip,rk3228-pinctrl":  for Rockchip RK3228
> -		"rockchip,rk3288-pinctrl":  for Rockchip RK3288
> -		"rockchip,rk3308-pinctrl":  for Rockchip RK3308
> -		"rockchip,rk3328-pinctrl":  for Rockchip RK3328
> -		"rockchip,rk3368-pinctrl":  for Rockchip RK3368
> -		"rockchip,rk3399-pinctrl":  for Rockchip RK3399
> -		"rockchip,rk3568-pinctrl":  for Rockchip RK3568
> -
> -  - rockchip,grf: phandle referencing a syscon providing the
> -	 "general register files"
> -
> -Optional properties for iomux controller:
> -  - rockchip,pmu: phandle referencing a syscon providing the pmu registers
> -	 as some SoCs carry parts of the iomux controller registers there.
> -	 Required for at least rk3188 and rk3288. On the rk3368 this should
> -	 point to the PMUGRF syscon.
> -
> -Deprecated properties for iomux controller:
> -  - reg: first element is the general register space of the iomux controller
> -	 It should be large enough to contain also separate pull registers.
> -	 second element is the separate pull register space of the rk3188.
> -	 Use rockchip,grf and rockchip,pmu described above instead.
> -
> -Required properties for gpio sub nodes:
> -See rockchip,gpio-bank.yaml
> -
> -Required properties for pin configuration node:
> -  - rockchip,pins: 3 integers array, represents a group of pins mux and config
> -    setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
> -    The MUX 0 means gpio and MUX 1 to N mean the specific device function.
> -    The phandle of a node containing the generic pinconfig options
> -    to use, as described in pinctrl-bindings.txt in this directory.
> -
> -Examples:
> -
> -#include <dt-bindings/pinctrl/rockchip.h>
> -
> -...
> -
> -pinctrl@20008000 {
> -	compatible = "rockchip,rk3066a-pinctrl";
> -	rockchip,grf = <&grf>;
> -
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	ranges;
> -
> -	gpio0: gpio0@20034000 {
> -		compatible = "rockchip,gpio-bank";
> -		reg = <0x20034000 0x100>;
> -		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&clk_gates8 9>;
> -
> -		gpio-controller;
> -		#gpio-cells = <2>;
> -
> -		interrupt-controller;
> -		#interrupt-cells = <2>;
> -	};
> -
> -	...
> -
> -	pcfg_pull_default: pcfg_pull_default {
> -		bias-pull-pin-default
> -	};
> -
> -	uart2 {
> -		uart2_xfer: uart2-xfer {
> -			rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
> -					<1 RK_PB1 1 &pcfg_pull_default>;
> -		};
> -	};
> -};
> -
> -uart2: serial@20064000 {
> -	compatible = "snps,dw-apb-uart";
> -	reg = <0x20064000 0x400>;
> -	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> -	reg-shift = <2>;
> -	reg-io-width = <1>;
> -	clocks = <&mux_uart2>;
> -
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&uart2_xfer>;
> -};
> diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
> new file mode 100644
> index 000000000..01a62245b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
> @@ -0,0 +1,176 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip Pinmux Controller
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +description: |
> +  The Rockchip Pinmux Controller enables the IC to share one PAD
> +  to several functional blocks. The sharing is done by multiplexing
> +  the PAD input/output signals. For each PAD there are several muxing
> +  options with option 0 being used as a GPIO.
> +
> +  Please refer to pinctrl-bindings.txt in this directory for details of the
> +  common pinctrl bindings used by client devices, including the meaning of the
> +  phrase "pin configuration node".
> +
> +  The Rockchip pin configuration node is a node of a group of pins which can be
> +  used for a specific device or function. This node represents both mux and
> +  config of the pins in that group. The 'pins' selects the function mode
> +  (also named pin mode) this pin can work on and the 'config' configures
> +  various pad settings such as pull-up, etc.
> +
> +  The pins are grouped into up to 9 individual pin banks which need to be
> +  defined as gpio sub-nodes of the pinmux controller.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,px30-pinctrl
> +      - rockchip,rk2928-pinctrl
> +      - rockchip,rk3066a-pinctrl
> +      - rockchip,rk3066b-pinctrl
> +      - rockchip,rk3128-pinctrl
> +      - rockchip,rk3188-pinctrl
> +      - rockchip,rk3228-pinctrl
> +      - rockchip,rk3288-pinctrl
> +      - rockchip,rk3308-pinctrl
> +      - rockchip,rk3328-pinctrl
> +      - rockchip,rk3368-pinctrl
> +      - rockchip,rk3399-pinctrl
> +      - rockchip,rk3568-pinctrl
> +      - rockchip,rv1108-pinctrl
> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      The phandle of the syscon node for the GRF registers.
> +
> +  rockchip,pmu:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      The phandle of the syscon node for the PMU registers,
> +      as some SoCs carry parts of the iomux controller registers there.
> +      Required for at least rk3188 and rk3288. On the rk3368 this should
> +      point to the PMUGRF syscon.
> +
> +  "#address-cells":
> +    enum: [1, 2]
> +
> +  "#size-cells":
> +    enum: [1, 2]
> +
> +  ranges: true
> +
> +patternProperties:
> +  "gpio@[0-9a-f]+$":
> +    type: object
> +
> +    $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#"
> +
> +    unevaluatedProperties: false
> +
> +  "pcfg-[a-z0-9-]+$":
> +    type: object
> +    properties:
> +      bias-disable: true
> +
> +      bias-pull-down: true
> +
> +      bias-pull-pin-default: true
> +
> +      bias-pull-up: true
> +
> +      drive-strength:
> +        minimum: 0
> +        maximum: 20
> +
> +      input-enable: true
> +
> +      input-schmitt-enable: true
> +
> +      output-high: true
> +
> +      output-low: true
> +
> +    additionalProperties: false
> +
> +additionalProperties:
> +  type: object
> +  additionalProperties:
> +    type: object
> +    properties:
> +      rockchip,pins:

Needs a type reference (uint32-matrix).

> +        minItems: 1
> +        items:
> +          items:
> +            - minimum: 0
> +              maximum: 8
> +              description:
> +                Pin bank.
> +            - minimum: 0
> +              maximum: 31
> +              description:
> +                Pin bank index.
> +            - minimum: 0
> +              maximum: 6
> +              description:
> +                Mux 0 means gpio and mux 1 to N means
> +                the specific device function.
> +            - description:
> +                The phandle of a node contains the generic pinconfig options
> +                to use as described in pinctrl-bindings.txt.
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/pinctrl/rockchip.h>
> +
> +    pinctrl: pinctrl {
> +      compatible = "rockchip,rk3066a-pinctrl";
> +      rockchip,grf = <&grf>;
> +
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      ranges;
> +
> +      gpio0: gpio@20034000 {
> +        compatible = "rockchip,gpio-bank";
> +        reg = <0x20034000 0x100>;
> +        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&clk_gates8 9>;
> +
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +      };
> +
> +      pcfg_pull_default: pcfg-pull-default {
> +        bias-pull-pin-default;
> +      };
> +
> +      uart2 {
> +        uart2_xfer: uart2-xfer {
> +          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
> +                          <1 RK_PB1 1 &pcfg_pull_default>;
> +        };
> +      };
> +    };
> +
> +    uart2: serial@20064000 {
> +      compatible = "snps,dw-apb-uart";
> +      reg = <0x20064000 0x400>;
> +      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&mux_uart2>;
> +      pinctrl-0 = <&uart2_xfer>;
> +      pinctrl-names = "default";
> +      reg-io-width = <1>;
> +      reg-shift = <2>;
> +    };
> -- 
> 2.20.1
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
deleted file mode 100644
index 84c411129..000000000
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ /dev/null
@@ -1,114 +0,0 @@ 
-* Rockchip Pinmux Controller
-
-The Rockchip Pinmux Controller, enables the IC
-to share one PAD to several functional blocks. The sharing is done by
-multiplexing the PAD input/output signals. For each PAD there are several
-muxing options with option 0 being the use as a GPIO.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The Rockchip pin configuration node is a node of a group of pins which can be
-used for a specific device or function. This node represents both mux and
-config of the pins in that group. The 'pins' selects the function mode(also
-named pin mode) this pin can work on and the 'config' configures various pad
-settings such as pull-up, etc.
-
-The pins are grouped into up to 5 individual pin banks which need to be
-defined as gpio sub-nodes of the pinmux controller.
-
-Required properties for iomux controller:
-  - compatible: should be
-		"rockchip,px30-pinctrl":    for Rockchip PX30
-		"rockchip,rv1108-pinctrl":  for Rockchip RV1108
-		"rockchip,rk2928-pinctrl":  for Rockchip RK2928
-		"rockchip,rk3066a-pinctrl": for Rockchip RK3066a
-		"rockchip,rk3066b-pinctrl": for Rockchip RK3066b
-		"rockchip,rk3128-pinctrl":  for Rockchip RK3128
-		"rockchip,rk3188-pinctrl":  for Rockchip RK3188
-		"rockchip,rk3228-pinctrl":  for Rockchip RK3228
-		"rockchip,rk3288-pinctrl":  for Rockchip RK3288
-		"rockchip,rk3308-pinctrl":  for Rockchip RK3308
-		"rockchip,rk3328-pinctrl":  for Rockchip RK3328
-		"rockchip,rk3368-pinctrl":  for Rockchip RK3368
-		"rockchip,rk3399-pinctrl":  for Rockchip RK3399
-		"rockchip,rk3568-pinctrl":  for Rockchip RK3568
-
-  - rockchip,grf: phandle referencing a syscon providing the
-	 "general register files"
-
-Optional properties for iomux controller:
-  - rockchip,pmu: phandle referencing a syscon providing the pmu registers
-	 as some SoCs carry parts of the iomux controller registers there.
-	 Required for at least rk3188 and rk3288. On the rk3368 this should
-	 point to the PMUGRF syscon.
-
-Deprecated properties for iomux controller:
-  - reg: first element is the general register space of the iomux controller
-	 It should be large enough to contain also separate pull registers.
-	 second element is the separate pull register space of the rk3188.
-	 Use rockchip,grf and rockchip,pmu described above instead.
-
-Required properties for gpio sub nodes:
-See rockchip,gpio-bank.yaml
-
-Required properties for pin configuration node:
-  - rockchip,pins: 3 integers array, represents a group of pins mux and config
-    setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
-    The MUX 0 means gpio and MUX 1 to N mean the specific device function.
-    The phandle of a node containing the generic pinconfig options
-    to use, as described in pinctrl-bindings.txt in this directory.
-
-Examples:
-
-#include <dt-bindings/pinctrl/rockchip.h>
-
-...
-
-pinctrl@20008000 {
-	compatible = "rockchip,rk3066a-pinctrl";
-	rockchip,grf = <&grf>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	gpio0: gpio0@20034000 {
-		compatible = "rockchip,gpio-bank";
-		reg = <0x20034000 0x100>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clk_gates8 9>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	...
-
-	pcfg_pull_default: pcfg_pull_default {
-		bias-pull-pin-default
-	};
-
-	uart2 {
-		uart2_xfer: uart2-xfer {
-			rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
-					<1 RK_PB1 1 &pcfg_pull_default>;
-		};
-	};
-};
-
-uart2: serial@20064000 {
-	compatible = "snps,dw-apb-uart";
-	reg = <0x20064000 0x400>;
-	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-	reg-shift = <2>;
-	reg-io-width = <1>;
-	clocks = <&mux_uart2>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_xfer>;
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
new file mode 100644
index 000000000..01a62245b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -0,0 +1,176 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Pinmux Controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip Pinmux Controller enables the IC to share one PAD
+  to several functional blocks. The sharing is done by multiplexing
+  the PAD input/output signals. For each PAD there are several muxing
+  options with option 0 being used as a GPIO.
+
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  The Rockchip pin configuration node is a node of a group of pins which can be
+  used for a specific device or function. This node represents both mux and
+  config of the pins in that group. The 'pins' selects the function mode
+  (also named pin mode) this pin can work on and the 'config' configures
+  various pad settings such as pull-up, etc.
+
+  The pins are grouped into up to 9 individual pin banks which need to be
+  defined as gpio sub-nodes of the pinmux controller.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-pinctrl
+      - rockchip,rk2928-pinctrl
+      - rockchip,rk3066a-pinctrl
+      - rockchip,rk3066b-pinctrl
+      - rockchip,rk3128-pinctrl
+      - rockchip,rk3188-pinctrl
+      - rockchip,rk3228-pinctrl
+      - rockchip,rk3288-pinctrl
+      - rockchip,rk3308-pinctrl
+      - rockchip,rk3328-pinctrl
+      - rockchip,rk3368-pinctrl
+      - rockchip,rk3399-pinctrl
+      - rockchip,rk3568-pinctrl
+      - rockchip,rv1108-pinctrl
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF registers.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the PMU registers,
+      as some SoCs carry parts of the iomux controller registers there.
+      Required for at least rk3188 and rk3288. On the rk3368 this should
+      point to the PMUGRF syscon.
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+patternProperties:
+  "gpio@[0-9a-f]+$":
+    type: object
+
+    $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#"
+
+    unevaluatedProperties: false
+
+  "pcfg-[a-z0-9-]+$":
+    type: object
+    properties:
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-pin-default: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        minimum: 0
+        maximum: 20
+
+      input-enable: true
+
+      input-schmitt-enable: true
+
+      output-high: true
+
+      output-low: true
+
+    additionalProperties: false
+
+additionalProperties:
+  type: object
+  additionalProperties:
+    type: object
+    properties:
+      rockchip,pins:
+        minItems: 1
+        items:
+          items:
+            - minimum: 0
+              maximum: 8
+              description:
+                Pin bank.
+            - minimum: 0
+              maximum: 31
+              description:
+                Pin bank index.
+            - minimum: 0
+              maximum: 6
+              description:
+                Mux 0 means gpio and mux 1 to N means
+                the specific device function.
+            - description:
+                The phandle of a node contains the generic pinconfig options
+                to use as described in pinctrl-bindings.txt.
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    pinctrl: pinctrl {
+      compatible = "rockchip,rk3066a-pinctrl";
+      rockchip,grf = <&grf>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      gpio0: gpio@20034000 {
+        compatible = "rockchip,gpio-bank";
+        reg = <0x20034000 0x100>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 9>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+      pcfg_pull_default: pcfg-pull-default {
+        bias-pull-pin-default;
+      };
+
+      uart2 {
+        uart2_xfer: uart2-xfer {
+          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
+                          <1 RK_PB1 1 &pcfg_pull_default>;
+        };
+      };
+    };
+
+    uart2: serial@20064000 {
+      compatible = "snps,dw-apb-uart";
+      reg = <0x20064000 0x400>;
+      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&mux_uart2>;
+      pinctrl-0 = <&uart2_xfer>;
+      pinctrl-names = "default";
+      reg-io-width = <1>;
+      reg-shift = <2>;
+    };