Message ID | 20211008032036.2201971-1-atish.patra@wdc.com (mailing list archive) |
---|---|
Headers | show |
Series | Add SBI v0.2 support for KVM | expand |
On Fri, Oct 8, 2021 at 11:20 AM Atish Patra <atish.patra@wdc.com> wrote: > > The Supervisor Binary Interface(SBI) specification[1] now defines a > base extension that provides extendability to add future extensions > while maintaining backward compatibility with previous versions. > The new version is defined as 0.2 and older version is marked as 0.1. > > This series adds following features to RISC-V Linux KVM. > 1. Adds support for SBI v0.2 in KVM > 2. SBI Hart state management extension (HSM) in KVM > 3. Ordered booting of guest vcpus in guest Linux > > This series is based on base KVM series which is already part of the kvm-next[2]. > > Guest kernel needs to also support SBI v0.2 and HSM extension in Kernel > to boot multiple vcpus. Linux kernel supports both starting v5.7. > In absense of that, guest can only boot 1 vcpu. > > Changes from v2->v3: > 1. Rebased on the latest merged kvm series. > 2. Dropped the reset extension patch because reset extension is not merged in kernel. > However, my tree[3] still contains it in case anybody wants to test it. > > Changes from v1->v2: > 1. Sent the patch 1 separately as it can merged independently. > 2. Added Reset extension functionality. > > Tested on Qemu and Rocket core FPGA. > > [1] https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc > [2] https://git.kernel.org/pub/scm/virt/kvm/kvm.git/log/?h=next > [3] https://github.com/atishp04/linux/tree/kvm_next_sbi_v02_reset Tested-by: Guo Ren <guoren@kernel.org> / # echo o > /proc/sysrq-trigger [ 97.164312] sysrq: Power Off [ 97.177376] reboot: Power down [ 97.189630] machine_power_off, 34. [ 97.209240] sbi_srst_power_off, 528 # KVM session ended normally. > [4] https://github.com/atishp04/linux/tree/kvm_next_sbi_v02 Yes, it will hang without your reset patch. / # echo o > /proc/sysrq-trigger [ 20.753143] sysrq: Power Off [ 20.766105] reboot: Power down [ 20.777462] machine_power_off, 34. [ 20.789932] default_power_off, 11. [ 41.769217] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 41.803683] (detected by 0, t=5252 jiffies, g=-191, q=2) [ 41.823503] rcu: All QSes seen, last rcu_sched kthread activity 5252 (4294902728-4294897476), jiffies_till_next_fqs=1, root ->qsmask 0x0 [ 41.868656] rcu: rcu_sched kthread starved for 5252 jiffies! g-191 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 [ 41.905574] rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior. [ 41.939434] rcu: RCU grace-period kthread stack dump: [ 41.957946] task:rcu_sched state:R running task stack: 0 pid: 11 ppid: 2 flags:0x00000000 [ 41.994477] Call Trace: [ 42.004217] [<ffffffff807384a8>] __schedule+0x22a/0x500 [ 42.024580] [<ffffffff807387d6>] schedule+0x58/0xcc [ 42.042803] [<ffffffff8073cf82>] schedule_timeout+0x68/0xda [ 42.063509] [<ffffffff8006e930>] rcu_gp_fqs_loop+0x22e/0x2de [ 42.084670] [<ffffffff8006f9c4>] rcu_gp_kthread+0xf4/0x118 [ 42.105075] [<ffffffff800345ae>] kthread+0x100/0x112 [ 42.123564] [<ffffffff80003068>] ret_from_exception+0x0/0xc [ 42.146121] rcu: Stack dump where RCU GP kthread last ran: [ 42.173224] Task dump for CPU 0: [ 42.185784] task:kworker/0:1 state:R running task stack: 0 pid: 13 ppid: 2 flags:0x00000008 [ 42.222593] Workqueue: events do_poweroff [ 42.237804] Call Trace: [ 42.247202] [<ffffffff8000487e>] dump_backtrace+0x1c/0x24 [ 42.267635] [<ffffffff80039aa6>] sched_show_task+0x156/0x176 [ 42.289890] [<ffffffff8072d914>] dump_cpu_task+0x42/0x4c [ 42.309939] [<ffffffff8072e6e2>] rcu_check_gp_kthread_starvation+0xfa/0x112 [ 42.337239] [<ffffffff80070e40>] rcu_sched_clock_irq+0x638/0x6ca [ 42.359294] [<ffffffff80076e44>] update_process_times+0xa2/0xca [ 42.381707] [<ffffffff80084cb2>] tick_sched_timer+0x78/0x130 [ 42.402984] [<ffffffff800774e2>] __hrtimer_run_queues+0x122/0x186 [ 42.427002] [<ffffffff80078198>] hrtimer_interrupt+0xcc/0x1d8 [ 42.447506] [<ffffffff805cbe70>] riscv_timer_interrupt+0x32/0x3c [ 42.470831] [<ffffffff8006508e>] handle_percpu_devid_irq+0x80/0x118 [ 42.495964] [<ffffffff800601d0>] handle_domain_irq+0x58/0x88 [ 42.518874] [<ffffffff803007ce>] riscv_intc_irq+0x36/0x5e [ 42.540270] [<ffffffff80003068>] ret_from_exception+0x0/0xc [ 42.561475] [<ffffffff80364f3e>] univ8250_console_write+0x0/0x2a [ 68.137301] watchdog: BUG: soft lockup - CPU#0 stuck for 45s! [kworker/0:1:13] [ 68.171330] Modules linked in: [ 68.183426] CPU: 0 PID: 13 Comm: kworker/0:1 Not tainted 5.15.0-rc2-00156-g5ff89d5fae43-dirty #10 [ 68.216937] Hardware name: linux,dummy-virt (DT) [ 68.234380] Workqueue: events do_poweroff [ 68.249798] epc : default_power_off+0x22/0x24 [ 68.266249] ra : default_power_off+0x1e/0x24 [ 68.283131] epc : ffffffff8072ce4a ra : ffffffff8072ce46 sp : ffffffd00406bda0 [ 68.310349] gp : ffffffff812e7ad0 tp : ffffffe0016b8000 t0 : ffffffff812f659f [ 68.337152] t1 : ffffffff812f6590 t2 : 0000000000000000 s0 : ffffffd00406bdb0 [ 68.364485] s1 : ffffffff81214950 a0 : 0000000000000016 a1 : ffffffff81284af0 [ 68.391110] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 86a924d9b215f000 [ 68.418203] a5 : 86a924d9b215f000 a6 : 0000000000000030 a7 : ffffffff80364f3e [ 68.445367] s2 : ffffffe001640a80 s3 : 0000000000000000 s4 : ffffffe00fa6d0c0 [ 68.472728] s5 : ffffffe00fa70e00 s6 : ffffffe00fa70e05 s7 : ffffffff81214958 [ 68.499914] s8 : ffffffff8002df26 s9 : ffffffff812e92e8 s10: ffffffff80034744 [ 68.526820] s11: 0000000000000000 t3 : 0000000000000064 t4 : ffffffffffffffff [ 68.554701] t5 : ffffffff812128f8 t6 : ffffffd00406bb08 [ 68.574879] status: 0000000000000120 badaddr: 0000000000000000 cause: 8000000000000005 [ 68.604540] [<ffffffff8072ce4a>] default_power_off+0x22/0x24 [ 68.625675] [<ffffffff8072cecc>] machine_power_off+0x26/0x2e [ 68.646515] [<ffffffff80036c7e>] kernel_power_off+0x66/0x6e [ 68.667518] [<ffffffff8005ba02>] do_poweroff+0xc/0x14 [ 68.686739] [<ffffffff8002dd24>] process_one_work+0x13e/0x28a [ 68.707735] [<ffffffff8002deec>] worker_thread+0x7c/0x320 [ 68.729517] [<ffffffff800345ae>] kthread+0x100/0x112 [ 68.748754] [<ffffffff80003068>] ret_from_exception+0x0/0xc > > Atish Patra (5): > RISC-V: Mark the existing SBI v0.1 implementation as legacy > RISC-V: Reorganize SBI code by moving legacy SBI to its own file > RISC-V: Add SBI v0.2 base extension > RISC-V: Add v0.1 replacement SBI extensions defined in v02 > RISC-V: Add SBI HSM extension in KVM > > arch/riscv/include/asm/kvm_vcpu_sbi.h | 33 ++++ > arch/riscv/include/asm/sbi.h | 9 ++ > arch/riscv/kvm/Makefile | 4 + > arch/riscv/kvm/vcpu.c | 19 +++ > arch/riscv/kvm/vcpu_sbi.c | 208 ++++++++++++-------------- > arch/riscv/kvm/vcpu_sbi_base.c | 73 +++++++++ > arch/riscv/kvm/vcpu_sbi_hsm.c | 109 ++++++++++++++ > arch/riscv/kvm/vcpu_sbi_legacy.c | 129 ++++++++++++++++ > arch/riscv/kvm/vcpu_sbi_replace.c | 136 +++++++++++++++++ > 9 files changed, 608 insertions(+), 112 deletions(-) > create mode 100644 arch/riscv/include/asm/kvm_vcpu_sbi.h > create mode 100644 arch/riscv/kvm/vcpu_sbi_base.c > create mode 100644 arch/riscv/kvm/vcpu_sbi_hsm.c > create mode 100644 arch/riscv/kvm/vcpu_sbi_legacy.c > create mode 100644 arch/riscv/kvm/vcpu_sbi_replace.c > > -- > 2.31.1 > > > -- > kvm-riscv mailing list > kvm-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/kvm-riscv