| Message ID | 20211011190625.4463-1-cjhuang@codeaurora.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | ath11k: enable power save in station mode | expand |
Carl Huang <cjhuang@codeaurora.org> wrote: > Enable power save in station mode. > > Run "iw dev wls1 set power_save off", check there is no NULL Data frame > from sniffer. Run "iw dev wls1 set power_save on", check there is NULL > Data frame from sniffer. > > Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 > > Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Fails to apply, please rebase on top of ath.git master branch. error: patch failed: drivers/net/wireless/ath/ath11k/mac.c:883 error: drivers/net/wireless/ath/ath11k/mac.c: patch does not apply stg import: Diff does not apply cleanly Patch set to Changes Requested.
On 2021-10-12 00:36, Carl Huang wrote: > Enable power save in station mode. > > Run "iw dev wls1 set power_save off", check there is no NULL Data > frame > from sniffer. Run "iw dev wls1 set power_save on", check there is NULL > Data frame from sniffer. > > Tested-on: QCA6390 hw2.0 PCI > WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 > > Signed-off-by: Carl Huang <cjhuang@codeaurora.org> > --- > drivers/net/wireless/ath/ath11k/core.c | 5 ++ > drivers/net/wireless/ath/ath11k/core.h | 1 + > drivers/net/wireless/ath/ath11k/hw.h | 1 + > drivers/net/wireless/ath/ath11k/mac.c | 99 > ++++++++++++++++++++++++++++++++-- > drivers/net/wireless/ath/ath11k/wmi.c | 33 ++++++++++++ > drivers/net/wireless/ath/ath11k/wmi.h | 3 +- > 6 files changed, 137 insertions(+), 5 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath11k/core.c > b/drivers/net/wireless/ath/ath11k/core.c > index 6120382..7e4b5b3 100644 > --- a/drivers/net/wireless/ath/ath11k/core.c > +++ b/drivers/net/wireless/ath/ath11k/core.c > @@ -67,6 +67,7 @@ static const struct ath11k_hw_params > ath11k_hw_params[] = { > .supports_monitor = true, > .supports_shadow_regs = false, > .idle_ps = false, > + .protocol_ps = false, > .cold_boot_calib = true, > .supports_suspend = false, > .hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074), > @@ -108,6 +109,7 @@ static const struct ath11k_hw_params > ath11k_hw_params[] = { > .supports_monitor = true, > .supports_shadow_regs = false, > .idle_ps = false, > + .protocol_ps = false, > .cold_boot_calib = true, > .supports_suspend = false, > .hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074), > @@ -149,6 +151,7 @@ static const struct ath11k_hw_params > ath11k_hw_params[] = { > .supports_monitor = false, > .supports_shadow_regs = true, > .idle_ps = true, > + .protocol_ps = true, > .cold_boot_calib = false, > .supports_suspend = true, > .hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074), > @@ -187,6 +190,7 @@ static const struct ath11k_hw_params > ath11k_hw_params[] = { > .supports_monitor = true, > .supports_shadow_regs = false, > .idle_ps = false, > + .protocol_ps = false, > .cold_boot_calib = false, > .supports_suspend = false, > .hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074), > @@ -227,6 +231,7 @@ static const struct ath11k_hw_params > ath11k_hw_params[] = { > .supports_monitor = false, > .supports_shadow_regs = true, > .idle_ps = true, > + .protocol_ps = true, > .cold_boot_calib = false, > .supports_suspend = true, > .hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855), > diff --git a/drivers/net/wireless/ath/ath11k/core.h > b/drivers/net/wireless/ath/ath11k/core.h > index f0a4b90..61e9684 100644 > --- a/drivers/net/wireless/ath/ath11k/core.h > +++ b/drivers/net/wireless/ath/ath11k/core.h > @@ -276,6 +276,7 @@ struct ath11k_vif { > bool is_started; > bool is_up; > bool spectral_enabled; > + bool ps; > u32 aid; > u8 bssid[ETH_ALEN]; > struct cfg80211_bitrate_mask bitrate_mask; > diff --git a/drivers/net/wireless/ath/ath11k/hw.h > b/drivers/net/wireless/ath/ath11k/hw.h > index 7a5101d..d4ad6f2 100644 > --- a/drivers/net/wireless/ath/ath11k/hw.h > +++ b/drivers/net/wireless/ath/ath11k/hw.h > @@ -167,6 +167,7 @@ struct ath11k_hw_params { > bool supports_monitor; > bool supports_shadow_regs; > bool idle_ps; > + bool protocol_ps; > bool cold_boot_calib; > bool supports_suspend; > u32 hal_desc_sz; > diff --git a/drivers/net/wireless/ath/ath11k/mac.c > b/drivers/net/wireless/ath/ath11k/mac.c > index d02823f..a254ef3 100644 > --- a/drivers/net/wireless/ath/ath11k/mac.c > +++ b/drivers/net/wireless/ath/ath11k/mac.c > @@ -883,12 +883,93 @@ static int ath11k_monitor_vdev_up(struct ath11k > *ar, int vdev_id) > return 0; > } > > +static int ath11k_mac_vif_setup_ps(struct ath11k_vif *arvif) > +{ > + struct ath11k *ar = arvif->ar; > + struct ieee80211_vif *vif = arvif->vif; > + struct ieee80211_conf *conf = &ar->hw->conf; > + enum wmi_sta_powersave_param param; > + enum wmi_sta_ps_mode psmode; > + int ret; > + int ps_timeout; > + bool enable_ps; > + > + lockdep_assert_held(&arvif->ar->conf_mutex); > + > + if (arvif->vif->type != NL80211_IFTYPE_STATION) > + return 0; > + > + enable_ps = arvif->ps; > + > + /* need to check if multiple vdev ps setting is supported */ > + > + if (!arvif->is_started) { > + /* mac80211 can update vif powersave state while disconnected. > + * Firmware doesn't behave nicely and consumes more power than > + * necessary if PS is disabled on a non-started vdev. Hence > + * force-enable PS for non-running vdevs. > + */ > + psmode = WMI_STA_PS_MODE_ENABLED; > + } else if (enable_ps) { > + psmode = WMI_STA_PS_MODE_ENABLED; > + param = WMI_STA_PS_PARAM_INACTIVITY_TIME; > + > + ps_timeout = conf->dynamic_ps_timeout; > + if (ps_timeout == 0) { > + /* Firmware doesn't like 0 */ > + ps_timeout = ieee80211_tu_to_usec( > + vif->bss_conf.beacon_int) / 1000; > + } > + > + ret = ath11k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, > + ps_timeout); > + if (ret) { > + ath11k_warn(ar->ab, "failed to set inactivity time for vdev %d: > %i\n", > + arvif->vdev_id, ret); > + return ret; > + } > + } else { > + psmode = WMI_STA_PS_MODE_DISABLED; > + } > + > + ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac vdev %d psmode %s\n", > + arvif->vdev_id, psmode ? "enable" : "disable"); > + ret = ath11k_wmi_set_psmode(ar, arvif->vdev_id, psmode); > + if (ret) { > + ath11k_warn(ar->ab, "failed to set PS Mode %d for vdev %d: %d\n", > + psmode, arvif->vdev_id, ret); > + return ret; > + } > + > + return 0; > +} > + > +static int ath11k_config_ps(struct ath11k *ar) > +{ > + struct ath11k_vif *arvif; > + int ret = 0; > + > + lockdep_assert_held(&ar->conf_mutex); > + > + list_for_each_entry(arvif, &ar->arvifs, list) { > + ret = ath11k_mac_vif_setup_ps(arvif); > + if (ret) { > + ath11k_warn(ar->ab, "failed to setup powersave: %d\n", ret); > + break; > + } > + } > + > + return ret; > +} > + > static int ath11k_mac_op_config(struct ieee80211_hw *hw, u32 changed) > { > - /* mac80211 requires this op to be present and that's why > - * there's an empty function, this can be extended when > - * required. > - */ > + struct ath11k *ar = hw->priv; > + > + mutex_lock(&ar->conf_mutex); > + if (changed & IEEE80211_CONF_CHANGE_PS) > + ath11k_config_ps(ar); > + mutex_unlock(&ar->conf_mutex); > > return 0; > } > @@ -2610,6 +2691,16 @@ static void > ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw, > } > } > > + if (changed & BSS_CHANGED_PS && > + ar->ab->hw_params.protocol_ps) { > + arvif->ps = vif->bss_conf.ps; > + > + ret = ath11k_config_ps(ar); > + if (ret) > + ath11k_warn(ar->ab, "failed to setup ps on vdev %i: %d\n", > + arvif->vdev_id, ret); > + } > + > if (changed & BSS_CHANGED_MCAST_RATE && > !ath11k_mac_vif_chan(arvif->vif, &def)) { > band = def.chan->band; > diff --git a/drivers/net/wireless/ath/ath11k/wmi.c > b/drivers/net/wireless/ath/ath11k/wmi.c > index 27ae944..8f46864 100644 > --- a/drivers/net/wireless/ath/ath11k/wmi.c > +++ b/drivers/net/wireless/ath/ath11k/wmi.c > @@ -1419,6 +1419,39 @@ int ath11k_wmi_send_set_ap_ps_param_cmd(struct > ath11k *ar, u8 *peer_addr, > return ret; > } > > +int ath11k_wmi_set_psmode(struct ath11k *ar, u32 vdev_id, > + enum wmi_sta_ps_mode psmode) > +{ > + struct ath11k_pdev_wmi *wmi = ar->wmi; > + struct wmi_sta_powersave_mode_cmd *cmd; > + struct sk_buff *skb; > + int ret; > + > + skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd)); > + if (!skb) > + return -ENOMEM; > + > + cmd = (struct wmi_sta_powersave_mode_cmd *)skb->data; > + cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, > + WMI_TAG_STA_POWERSAVE_MODE_CMD) | > + FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE); > + > + cmd->vdev_id = vdev_id; > + cmd->sta_ps_mode = psmode; > + > + ath11k_dbg(ar->ab, ATH11K_DBG_WMI, > + "WMI set sta ps vdev_id %d ps %d\n", > + vdev_id, psmode); > + > + ret = ath11k_wmi_cmd_send(wmi, skb, WMI_STA_POWERSAVE_MODE_CMDID); > + if (ret) { > + ath11k_warn(ar->ab, "failed to send WMI_STA_POWERSAVE_PARAM_CMDID"); > + dev_kfree_skb(skb); > + } > + > + return ret; > +} An API which does this is already present in ATH11K, you may have to take a look at ath11k_wmi_pdev_set_ps_mode() ? Manikanta
Kalle Valo <kvalo@codeaurora.org> writes: > Carl Huang <cjhuang@codeaurora.org> wrote: > >> Enable power save in station mode. >> >> Run "iw dev wls1 set power_save off", check there is no NULL Data frame >> from sniffer. Run "iw dev wls1 set power_save on", check there is NULL >> Data frame from sniffer. >> >> Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 >> >> Signed-off-by: Carl Huang <cjhuang@codeaurora.org> > > Fails to apply, please rebase on top of ath.git master branch. > > error: patch failed: drivers/net/wireless/ath/ath11k/mac.c:883 > error: drivers/net/wireless/ath/ath11k/mac.c: patch does not apply > stg import: Diff does not apply cleanly > > Patch set to Changes Requested. I'll rebase the patch and submit v2.
mpubbise@codeaurora.org writes: > On 2021-10-12 00:36, Carl Huang wrote: >> Enable power save in station mode. >> >> Run "iw dev wls1 set power_save off", check there is no NULL Data >> frame >> from sniffer. Run "iw dev wls1 set power_save on", check there is NULL >> Data frame from sniffer. >> >> Tested-on: QCA6390 hw2.0 PCI >> WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 >> >> Signed-off-by: Carl Huang <cjhuang@codeaurora.org> [...] >> +int ath11k_wmi_set_psmode(struct ath11k *ar, u32 vdev_id, >> + enum wmi_sta_ps_mode psmode) >> +{ >> + struct ath11k_pdev_wmi *wmi = ar->wmi; >> + struct wmi_sta_powersave_mode_cmd *cmd; >> + struct sk_buff *skb; >> + int ret; >> + >> + skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd)); >> + if (!skb) >> + return -ENOMEM; >> + >> + cmd = (struct wmi_sta_powersave_mode_cmd *)skb->data; >> + cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, >> + WMI_TAG_STA_POWERSAVE_MODE_CMD) | >> + FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE); >> + >> + cmd->vdev_id = vdev_id; >> + cmd->sta_ps_mode = psmode; >> + >> + ath11k_dbg(ar->ab, ATH11K_DBG_WMI, >> + "WMI set sta ps vdev_id %d ps %d\n", >> + vdev_id, psmode); >> + >> + ret = ath11k_wmi_cmd_send(wmi, skb, WMI_STA_POWERSAVE_MODE_CMDID); >> + if (ret) { >> + ath11k_warn(ar->ab, "failed to send WMI_STA_POWERSAVE_PARAM_CMDID"); >> + dev_kfree_skb(skb); >> + } >> + >> + return ret; >> +} > > An API which does this is already present in ATH11K, you may have to > take a look at ath11k_wmi_pdev_set_ps_mode() ? Good catch, I'll fix this in v2. And please do trim your replies, quotes over 200 lines long make it hard to read.
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 6120382..7e4b5b3 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -67,6 +67,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .supports_monitor = true, .supports_shadow_regs = false, .idle_ps = false, + .protocol_ps = false, .cold_boot_calib = true, .supports_suspend = false, .hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074), @@ -108,6 +109,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .supports_monitor = true, .supports_shadow_regs = false, .idle_ps = false, + .protocol_ps = false, .cold_boot_calib = true, .supports_suspend = false, .hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074), @@ -149,6 +151,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .supports_monitor = false, .supports_shadow_regs = true, .idle_ps = true, + .protocol_ps = true, .cold_boot_calib = false, .supports_suspend = true, .hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074), @@ -187,6 +190,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .supports_monitor = true, .supports_shadow_regs = false, .idle_ps = false, + .protocol_ps = false, .cold_boot_calib = false, .supports_suspend = false, .hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074), @@ -227,6 +231,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .supports_monitor = false, .supports_shadow_regs = true, .idle_ps = true, + .protocol_ps = true, .cold_boot_calib = false, .supports_suspend = true, .hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855), diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index f0a4b90..61e9684 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -276,6 +276,7 @@ struct ath11k_vif { bool is_started; bool is_up; bool spectral_enabled; + bool ps; u32 aid; u8 bssid[ETH_ALEN]; struct cfg80211_bitrate_mask bitrate_mask; diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h index 7a5101d..d4ad6f2 100644 --- a/drivers/net/wireless/ath/ath11k/hw.h +++ b/drivers/net/wireless/ath/ath11k/hw.h @@ -167,6 +167,7 @@ struct ath11k_hw_params { bool supports_monitor; bool supports_shadow_regs; bool idle_ps; + bool protocol_ps; bool cold_boot_calib; bool supports_suspend; u32 hal_desc_sz; diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index d02823f..a254ef3 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -883,12 +883,93 @@ static int ath11k_monitor_vdev_up(struct ath11k *ar, int vdev_id) return 0; } +static int ath11k_mac_vif_setup_ps(struct ath11k_vif *arvif) +{ + struct ath11k *ar = arvif->ar; + struct ieee80211_vif *vif = arvif->vif; + struct ieee80211_conf *conf = &ar->hw->conf; + enum wmi_sta_powersave_param param; + enum wmi_sta_ps_mode psmode; + int ret; + int ps_timeout; + bool enable_ps; + + lockdep_assert_held(&arvif->ar->conf_mutex); + + if (arvif->vif->type != NL80211_IFTYPE_STATION) + return 0; + + enable_ps = arvif->ps; + + /* need to check if multiple vdev ps setting is supported */ + + if (!arvif->is_started) { + /* mac80211 can update vif powersave state while disconnected. + * Firmware doesn't behave nicely and consumes more power than + * necessary if PS is disabled on a non-started vdev. Hence + * force-enable PS for non-running vdevs. + */ + psmode = WMI_STA_PS_MODE_ENABLED; + } else if (enable_ps) { + psmode = WMI_STA_PS_MODE_ENABLED; + param = WMI_STA_PS_PARAM_INACTIVITY_TIME; + + ps_timeout = conf->dynamic_ps_timeout; + if (ps_timeout == 0) { + /* Firmware doesn't like 0 */ + ps_timeout = ieee80211_tu_to_usec( + vif->bss_conf.beacon_int) / 1000; + } + + ret = ath11k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, + ps_timeout); + if (ret) { + ath11k_warn(ar->ab, "failed to set inactivity time for vdev %d: %i\n", + arvif->vdev_id, ret); + return ret; + } + } else { + psmode = WMI_STA_PS_MODE_DISABLED; + } + + ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac vdev %d psmode %s\n", + arvif->vdev_id, psmode ? "enable" : "disable"); + ret = ath11k_wmi_set_psmode(ar, arvif->vdev_id, psmode); + if (ret) { + ath11k_warn(ar->ab, "failed to set PS Mode %d for vdev %d: %d\n", + psmode, arvif->vdev_id, ret); + return ret; + } + + return 0; +} + +static int ath11k_config_ps(struct ath11k *ar) +{ + struct ath11k_vif *arvif; + int ret = 0; + + lockdep_assert_held(&ar->conf_mutex); + + list_for_each_entry(arvif, &ar->arvifs, list) { + ret = ath11k_mac_vif_setup_ps(arvif); + if (ret) { + ath11k_warn(ar->ab, "failed to setup powersave: %d\n", ret); + break; + } + } + + return ret; +} + static int ath11k_mac_op_config(struct ieee80211_hw *hw, u32 changed) { - /* mac80211 requires this op to be present and that's why - * there's an empty function, this can be extended when - * required. - */ + struct ath11k *ar = hw->priv; + + mutex_lock(&ar->conf_mutex); + if (changed & IEEE80211_CONF_CHANGE_PS) + ath11k_config_ps(ar); + mutex_unlock(&ar->conf_mutex); return 0; } @@ -2610,6 +2691,16 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw, } } + if (changed & BSS_CHANGED_PS && + ar->ab->hw_params.protocol_ps) { + arvif->ps = vif->bss_conf.ps; + + ret = ath11k_config_ps(ar); + if (ret) + ath11k_warn(ar->ab, "failed to setup ps on vdev %i: %d\n", + arvif->vdev_id, ret); + } + if (changed & BSS_CHANGED_MCAST_RATE && !ath11k_mac_vif_chan(arvif->vif, &def)) { band = def.chan->band; diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index 27ae944..8f46864 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -1419,6 +1419,39 @@ int ath11k_wmi_send_set_ap_ps_param_cmd(struct ath11k *ar, u8 *peer_addr, return ret; } +int ath11k_wmi_set_psmode(struct ath11k *ar, u32 vdev_id, + enum wmi_sta_ps_mode psmode) +{ + struct ath11k_pdev_wmi *wmi = ar->wmi; + struct wmi_sta_powersave_mode_cmd *cmd; + struct sk_buff *skb; + int ret; + + skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd)); + if (!skb) + return -ENOMEM; + + cmd = (struct wmi_sta_powersave_mode_cmd *)skb->data; + cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, + WMI_TAG_STA_POWERSAVE_MODE_CMD) | + FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE); + + cmd->vdev_id = vdev_id; + cmd->sta_ps_mode = psmode; + + ath11k_dbg(ar->ab, ATH11K_DBG_WMI, + "WMI set sta ps vdev_id %d ps %d\n", + vdev_id, psmode); + + ret = ath11k_wmi_cmd_send(wmi, skb, WMI_STA_POWERSAVE_MODE_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_STA_POWERSAVE_PARAM_CMDID"); + dev_kfree_skb(skb); + } + + return ret; +} + int ath11k_wmi_set_sta_ps_param(struct ath11k *ar, u32 vdev_id, u32 param, u32 param_value) { diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h index 0730bdb..e2cce86 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.h +++ b/drivers/net/wireless/ath/ath11k/wmi.h @@ -5600,7 +5600,8 @@ int ath11k_wmi_send_peer_create_cmd(struct ath11k *ar, struct peer_create_params *param); int ath11k_wmi_vdev_set_param_cmd(struct ath11k *ar, u32 vdev_id, u32 param_id, u32 param_value); - +int ath11k_wmi_set_psmode(struct ath11k *ar, u32 vdev_id, + enum wmi_sta_ps_mode psmode); int ath11k_wmi_set_sta_ps_param(struct ath11k *ar, u32 vdev_id, u32 param, u32 param_value); int ath11k_wmi_force_fw_hang_cmd(struct ath11k *ar, u32 type, u32 delay_time_ms);
Enable power save in station mode. Run "iw dev wls1 set power_save off", check there is no NULL Data frame from sniffer. Run "iw dev wls1 set power_save on", check there is NULL Data frame from sniffer. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> --- drivers/net/wireless/ath/ath11k/core.c | 5 ++ drivers/net/wireless/ath/ath11k/core.h | 1 + drivers/net/wireless/ath/ath11k/hw.h | 1 + drivers/net/wireless/ath/ath11k/mac.c | 99 ++++++++++++++++++++++++++++++++-- drivers/net/wireless/ath/ath11k/wmi.c | 33 ++++++++++++ drivers/net/wireless/ath/ath11k/wmi.h | 3 +- 6 files changed, 137 insertions(+), 5 deletions(-)