| Message ID | db477b0cb444891a17c4bb424467667dc30d0bab.1624794264.git.christophe.jaillet@wanadoo.fr (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | PCI: j721e: Fix an error handling path in 'j721e_pcie_probe()' | expand |
Hi Christophe, Thank you for sending the patch over! Just a tiny nit-pick: there is no need to surround function names in single quotes in the subject and in the commit message. > If an error occurs after a successful 'cdns_pcie_init_phy()' call, it must > be undone by a 'cdns_pcie_disable_phy()' call, as already done above and > below. Here, in the above sentence, you could simply mention that this is needed for the device to be correctly powered down should there be an error, and reference to the "above" and "below" code. > Update the 'goto' to branch at the correct place of the error handling > path. > > Fixes: 49e0efdce791 ("PCI: j721e: Add support to provide refclk to PCIe connector") > Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> > --- > drivers/pci/controller/cadence/pci-j721e.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c > index 35e61048e133..8933db6ab1af 100644 > --- a/drivers/pci/controller/cadence/pci-j721e.c > +++ b/drivers/pci/controller/cadence/pci-j721e.c > @@ -424,7 +424,7 @@ static int j721e_pcie_probe(struct platform_device *pdev) > ret = clk_prepare_enable(clk); > if (ret) { > dev_err(dev, "failed to enable pcie_refclk\n"); > - goto err_get_sync; > + goto err_pcie_setup; > } > pcie->refclk = clk; Thank you! Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Krzysztof
On Sun, 27 Jun 2021 13:46:24 +0200, Christophe JAILLET wrote: > If an error occurs after a successful 'cdns_pcie_init_phy()' call, it must > be undone by a 'cdns_pcie_disable_phy()' call, as already done above and > below. > > Update the 'goto' to branch at the correct place of the error handling > path. > > [...] Applied to pci/cadence, thanks! [1/1] PCI: j721e: Fix an error handling path in 'j721e_pcie_probe()' https://git.kernel.org/lpieralisi/pci/c/1faff614aa Thanks, Lorenzo
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index 35e61048e133..8933db6ab1af 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -424,7 +424,7 @@ static int j721e_pcie_probe(struct platform_device *pdev) ret = clk_prepare_enable(clk); if (ret) { dev_err(dev, "failed to enable pcie_refclk\n"); - goto err_get_sync; + goto err_pcie_setup; } pcie->refclk = clk;
If an error occurs after a successful 'cdns_pcie_init_phy()' call, it must be undone by a 'cdns_pcie_disable_phy()' call, as already done above and below. Update the 'goto' to branch at the correct place of the error handling path. Fixes: 49e0efdce791 ("PCI: j721e: Add support to provide refclk to PCIe connector") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> --- drivers/pci/controller/cadence/pci-j721e.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)