diff mbox series

[4/4] platform/x86: Add Intel Software Defined Silicon driver

Message ID 20211120231705.189969-5-david.e.box@linux.intel.com (mailing list archive)
State Superseded
Delegated to: Bjorn Helgaas
Headers show
Series Auxiliary bus driver support for Intel PCIe VSEC/DVSEC | expand

Commit Message

David E. Box Nov. 20, 2021, 11:17 p.m. UTC
Intel Software Defined Silicon (SDSi) is a post manufacturing mechanism for
activating additional silicon features. Features are enabled through a
license activation process.  The SDSi driver provides a per socket, sysfs
attribute interface for applications to perform 3 main provisioning
functions:

1. Provision an Authentication Key Certificate (AKC), a key written to
   internal NVRAM that is used to authenticate a capability specific
   activation payload.

2. Provision a Capability Activation Payload (CAP), a token authenticated
   using the AKC and applied to the CPU configuration to activate a new
   feature.

3. Read the SDSi State Certificate, containing the CPU configuration
   state.

The operations perform function specific mailbox commands that forward the
requests to SDSi hardware to perform authentication of the payloads and
enable the silicon configuration (to be made available after power
cycling).

The SDSi device itself is enumerated as an auxiliary device from the
intel_vsec driver and as such has a build dependency on CONFIG_INTEL_VSEC.

Link: https://github.com/intel/intel-sdsi
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Mark Gross <markgross@kernel.org>
---
 .../ABI/testing/sysfs-driver-intel_sdsi       |  75 +++
 MAINTAINERS                                   |   5 +
 drivers/platform/x86/intel/Kconfig            |  12 +
 drivers/platform/x86/intel/Makefile           |   2 +
 drivers/platform/x86/intel/sdsi.c             | 571 ++++++++++++++++++
 drivers/platform/x86/intel/vsec.c             |  12 +-
 6 files changed, 676 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-intel_sdsi
 create mode 100644 drivers/platform/x86/intel/sdsi.c

Comments

Greg Kroah-Hartman Nov. 21, 2021, 12:31 p.m. UTC | #1
On Sat, Nov 20, 2021 at 03:17:05PM -0800, David E. Box wrote:
> +static ssize_t registers_read(struct file *filp, struct kobject *kobj,
> +			      struct bin_attribute *attr, char *buf, loff_t off,
> +			      size_t count)
> +{
> +	struct device *dev = kobj_to_dev(kobj);
> +	struct sdsi_priv *priv = dev_get_drvdata(dev);
> +	void __iomem *addr = priv->regs_addr;
> +
> +	memcpy_fromio(buf, addr + off, count);

Oh nice, this will be fun if I provide "interesting" values for off to
the function right?

Remember:
	All input is evil.

> +
> +	return count;
> +}
> +static BIN_ATTR(registers, 0400, registers_read, NULL, SDSI_SIZE_REGS);
> +
> +static struct bin_attribute *sdsi_bin_attrs[] = {
> +	&bin_attr_registers,
> +	&bin_attr_state_certificate,
> +	&bin_attr_provision_akc,
> +	&bin_attr_provision_cap,
> +	NULL
> +};
> +
> +static ssize_t guid_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	struct sdsi_priv *priv = dev_get_drvdata(dev);
> +
> +	return sprintf(buf, "0x%x\n", priv->guid);

sysfs_emit() please.

These sysfs attributes are crazy.  Who has audited them to be correct
and work properly?  It feels like there are just buffer overflows
waiting to be exploited in them due to the reading/writing of raw memory
buffers all over the place.

Where is the userspace tool that uses these files?

thanks,

greg k-h
David E. Box Nov. 21, 2021, 5:18 p.m. UTC | #2
Hi Greg,

On Sun, 2021-11-21 at 13:31 +0100, Greg KH wrote:
> On Sat, Nov 20, 2021 at 03:17:05PM -0800, David E. Box wrote:
> > +static ssize_t registers_read(struct file *filp, struct kobject *kobj,
> > +			      struct bin_attribute *attr, char *buf, loff_t off,
> > +			      size_t count)
> > +{
> > +	struct device *dev = kobj_to_dev(kobj);
> > +	struct sdsi_priv *priv = dev_get_drvdata(dev);
> > +	void __iomem *addr = priv->regs_addr;
> > +
> > +	memcpy_fromio(buf, addr + off, count);
> 
> Oh nice, this will be fun if I provide "interesting" values for off to
> the function right?
> 
> Remember:
> 	All input is evil.

I was relying on sysfs_kf_bin_read() which checks off (pos) before calling us.

        if (size) {
                if (pos >= size)
                        return 0;
                if (pos + count > size)
                        count = size - pos;
        }

> 
> > +
> > +	return count;
> > +}
> > +static BIN_ATTR(registers, 0400, registers_read, NULL, SDSI_SIZE_REGS);
> > +
> > +static struct bin_attribute *sdsi_bin_attrs[] = {
> > +	&bin_attr_registers,
> > +	&bin_attr_state_certificate,
> > +	&bin_attr_provision_akc,
> > +	&bin_attr_provision_cap,
> > +	NULL
> > +};
> > +
> > +static ssize_t guid_show(struct device *dev, struct device_attribute *attr,
> > char *buf)
> > +{
> > +	struct sdsi_priv *priv = dev_get_drvdata(dev);
> > +
> > +	return sprintf(buf, "0x%x\n", priv->guid);
> 
> sysfs_emit() please.
> 
> These sysfs attributes are crazy.  Who has audited them to be correct
> and work properly? It feels like there are just buffer overflows
> waiting to be exploited in them due to the reading/writing of raw memory
> buffers all over the place.

Agree with the concern. I can submit the tests that were used. Is selftests the
best place?

> 
> Where is the userspace tool that uses these files?

The tool will be published in the same github repo as the spec once the driver
is ready.

Thanks.

David

> 
> thanks,
> 
> greg k-h
Greg Kroah-Hartman Nov. 22, 2021, 6:21 a.m. UTC | #3
On Sun, Nov 21, 2021 at 09:18:25AM -0800, David E. Box wrote:
> > These sysfs attributes are crazy.  Who has audited them to be correct
> > and work properly? It feels like there are just buffer overflows
> > waiting to be exploited in them due to the reading/writing of raw memory
> > buffers all over the place.
> 
> Agree with the concern. I can submit the tests that were used. Is selftests the
> best place?

Yes.

> > Where is the userspace tool that uses these files?
> 
> The tool will be published in the same github repo as the spec once the driver
> is ready.

Isn't the driver "ready" if you are asking for it to be accepted
here?  Why isn't it published already so we can see if it actually is
tested?

thanks,

greg k-h
David E. Box Nov. 22, 2021, 2:51 p.m. UTC | #4
On Mon, 2021-11-22 at 07:21 +0100, Greg KH wrote:
> On Sun, Nov 21, 2021 at 09:18:25AM -0800, David E. Box wrote:
> > > These sysfs attributes are crazy.  Who has audited them to be correct
> > > and work properly? It feels like there are just buffer overflows
> > > waiting to be exploited in them due to the reading/writing of raw memory
> > > buffers all over the place.
> > 
> > Agree with the concern. I can submit the tests that were used. Is selftests
> > the
> > best place?
> 
> Yes.
> 
> > > Where is the userspace tool that uses these files?
> > 
> > The tool will be published in the same github repo as the spec once the
> > driver
> > is ready.
> 
> Isn't the driver "ready" if you are asking for it to be accepted
> here?  Why isn't it published already so we can see if it actually is
> tested?

It will be required for the tests anyway, so I'll submit it with them.

Thanks.

David
Bjorn Helgaas Nov. 22, 2021, 6:44 p.m. UTC | #5
On Sat, Nov 20, 2021 at 03:17:05PM -0800, David E. Box wrote:
> Intel Software Defined Silicon (SDSi) is a post manufacturing mechanism for
> activating additional silicon features. Features are enabled through a
> license activation process.  The SDSi driver provides a per socket, sysfs
> attribute interface for applications to perform 3 main provisioning
> functions:
> 
> 1. Provision an Authentication Key Certificate (AKC), a key written to
>    internal NVRAM that is used to authenticate a capability specific
>    activation payload.
> 
> 2. Provision a Capability Activation Payload (CAP), a token authenticated
>    using the AKC and applied to the CPU configuration to activate a new
>    feature.
> 
> 3. Read the SDSi State Certificate, containing the CPU configuration
>    state.
> 
> The operations perform function specific mailbox commands that forward the
> requests to SDSi hardware to perform authentication of the payloads and
> enable the silicon configuration (to be made available after power
> cycling).
> 
> The SDSi device itself is enumerated as an auxiliary device from the
> intel_vsec driver and as such has a build dependency on CONFIG_INTEL_VSEC.
> 
> Link: https://github.com/intel/intel-sdsi
> Signed-off-by: David E. Box <david.e.box@linux.intel.com>
> Reviewed-by: Mark Gross <markgross@kernel.org>
> ---
>  .../ABI/testing/sysfs-driver-intel_sdsi       |  75 +++
>  MAINTAINERS                                   |   5 +
>  drivers/platform/x86/intel/Kconfig            |  12 +
>  drivers/platform/x86/intel/Makefile           |   2 +
>  drivers/platform/x86/intel/sdsi.c             | 571 ++++++++++++++++++
>  drivers/platform/x86/intel/vsec.c             |  12 +-
>  6 files changed, 676 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/ABI/testing/sysfs-driver-intel_sdsi
>  create mode 100644 drivers/platform/x86/intel/sdsi.c
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel_sdsi b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
> new file mode 100644
> index 000000000000..32a017ed3dd3
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
> @@ -0,0 +1,75 @@
> +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X
> +Date:		Nov 2021
> +KernelVersion:	5.17
> +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> +Description:
> +		This folder contains interface files for accessing Intel
> +		Software Defined Silicon (SDSi) features on a CPU. X
> +		represent the socket instance (though not the socket id).

s/represent/represents/
s/socket id/socket ID/

As a user, how do I learn the socket instance?  Look at dmesg?  Look
at some other sysfs file?

> +		Some files communicate with SDSi hardware through a mailbox.
> +		Should the operation fail, one of the following error codes
> +		may be returned:
> +
> +		Error Code	Cause
> +	        ----------	-----
> +	        EIO		General mailbox failure. Log may indicate cause.
> +	        EBUSY		Mailbox is owned by another agent.
> +	        EPERM		SDSI capability is not enabled in hardware.
> +	        EPROTO		Failure in mailbox protocol detected by driver.
> +				See log for details.
> +	        EOVERFLOW	For provision commands, the size of the data
> +				exceeds what may be written.
> +	        ESPIPE		Seeking is not allowed.
> +	        ETIMEDOUT	Failure to complete mailbox transaction in time.
> +
> +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/guid
> +Date:		Nov 2021
> +KernelVersion:	5.17
> +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> +Description:
> +		(RO) The GUID for the registers file. The GUID identifies
> +		the register layout of the registers file in this folder.
> +		Information about the register layouts for a particular GUID
> +		is available at http://github.com/intel/intel-sdsi

s/register layout of the registers file/layout of the registers file/

> +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/registers
> +Date:		Nov 2021
> +KernelVersion:	5.17
> +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> +Description:
> +		(RO) Contains information needed by applications to provision
> +		a CPU and monitor status information. The layout of this file
> +		is determined by the GUID in this folder. Information about the
> +		layout for a particular GUID is available at
> +		http://github.com/intel/intel-sdsi
> +
> +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/provision_akc
> +Date:		Nov 2021
> +KernelVersion:	5.17
> +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> +Description:
> +		(WO) Used to write an Authentication Key Certificate (AKC) to
> +		the SDSi NVRAM for the CPU. The AKC is used to authentication a
> +		Capability Activation Payload. Mailbox command.

s/used to authentication/used to authenticate/

> +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/provision_cap
> +Date:		Nov 2021
> +KernelVersion:	5.17
> +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> +Description:
> +		(WO) Used to write a Capability Activation Payload (CAP) to the
> +		SDSi NVRAM for the CPU. CAP files are used to activate a given
> +		CPU feature. The CAP file is validated by SDSi hardware using a
> +		previously provision AKC file. Upon successful authentication, the
> +		CPU configuration is updated. A cold reboot is required to fully
> +		activate the feature. Mailbox command.

"CAP file" sounds like it might be redundant.  It *seems* like the
*payload* is what will be validated by SDSi and activate the feature.
Not sure "file" is meaningful if this is really talking about the
content of the CAP.

s/previously provision/previously provisioned/

> +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/read_state_cert
> +Date:		Nov 2021
> +KernelVersion:	5.17
> +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> +Description:
> +		(RO) Used to read back the current State Certificate for the CPU
> +		from SDSi hardware. The State Certificate contains information
> +		about the current licenses on the CPU. Mailbox command.
David E. Box Nov. 22, 2021, 11:20 p.m. UTC | #6
Hi Bjorn,

Thanks for reviewing.

On Mon, 2021-11-22 at 12:44 -0600, Bjorn Helgaas wrote:
> On Sat, Nov 20, 2021 at 03:17:05PM -0800, David E. Box wrote:
> > Intel Software Defined Silicon (SDSi) is a post manufacturing mechanism for
> > activating additional silicon features. Features are enabled through a
> > license activation process.  The SDSi driver provides a per socket, sysfs
> > attribute interface for applications to perform 3 main provisioning
> > functions:
> > 
> > 1. Provision an Authentication Key Certificate (AKC), a key written to
> >    internal NVRAM that is used to authenticate a capability specific
> >    activation payload.
> > 
> > 2. Provision a Capability Activation Payload (CAP), a token authenticated
> >    using the AKC and applied to the CPU configuration to activate a new
> >    feature.
> > 
> > 3. Read the SDSi State Certificate, containing the CPU configuration
> >    state.
> > 
> > The operations perform function specific mailbox commands that forward the
> > requests to SDSi hardware to perform authentication of the payloads and
> > enable the silicon configuration (to be made available after power
> > cycling).
> > 
> > The SDSi device itself is enumerated as an auxiliary device from the
> > intel_vsec driver and as such has a build dependency on CONFIG_INTEL_VSEC.
> > 
> > Link: https://github.com/intel/intel-sdsi
> > Signed-off-by: David E. Box <david.e.box@linux.intel.com>
> > Reviewed-by: Mark Gross <markgross@kernel.org>
> > ---
> >  .../ABI/testing/sysfs-driver-intel_sdsi       |  75 +++
> >  MAINTAINERS                                   |   5 +
> >  drivers/platform/x86/intel/Kconfig            |  12 +
> >  drivers/platform/x86/intel/Makefile           |   2 +
> >  drivers/platform/x86/intel/sdsi.c             | 571 ++++++++++++++++++
> >  drivers/platform/x86/intel/vsec.c             |  12 +-
> >  6 files changed, 676 insertions(+), 1 deletion(-)
> >  create mode 100644 Documentation/ABI/testing/sysfs-driver-intel_sdsi
> >  create mode 100644 drivers/platform/x86/intel/sdsi.c
> > 
> > diff --git a/Documentation/ABI/testing/sysfs-driver-intel_sdsi
> > b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
> > new file mode 100644
> > index 000000000000..32a017ed3dd3
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
> > @@ -0,0 +1,75 @@
> > +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X
> > +Date:		Nov 2021
> > +KernelVersion:	5.17
> > +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> > +Description:
> > +		This folder contains interface files for accessing Intel
> > +		Software Defined Silicon (SDSi) features on a CPU. X
> > +		represent the socket instance (though not the socket id).
> 
> s/represent/represents/
> s/socket id/socket ID/

Ack

> 
> As a user, how do I learn the socket instance?  Look at dmesg?  Look
> at some other sysfs file?

Instances are just the list of SDSi devices in this folder. Each device
represents a socket. They are enumerated in the order they are discovered. If
you meant socket ID, that is read from the registers file in this folder per the
spec. Ideally the two would be the same, but the socket ID is not known until
probe.

> 
> > +		Some files communicate with SDSi hardware through a mailbox.
> > +		Should the operation fail, one of the following error codes
> > +		may be returned:
> > +
> > +		Error Code	Cause
> > +	        ----------	-----
> > +	        EIO		General mailbox failure. Log may indicate cause.
> > +	        EBUSY		Mailbox is owned by another agent.
> > +	        EPERM		SDSI capability is not enabled in hardware.
> > +	        EPROTO		Failure in mailbox protocol detected by
> > driver.
> > +				See log for details.
> > +	        EOVERFLOW	For provision commands, the size of the data
> > +				exceeds what may be written.
> > +	        ESPIPE		Seeking is not allowed.
> > +	        ETIMEDOUT	Failure to complete mailbox transaction in time.
> > +
> > +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/gui
> > d
> > +Date:		Nov 2021
> > +KernelVersion:	5.17
> > +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> > +Description:
> > +		(RO) The GUID for the registers file. The GUID identifies
> > +		the register layout of the registers file in this folder.
> > +		Information about the register layouts for a particular GUID
> > +		is available at http://github.com/intel/intel-sdsi
> 
> s/register layout of the registers file/layout of the registers file/

Ack

> 
> > +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/reg
> > isters
> > +Date:		Nov 2021
> > +KernelVersion:	5.17
> > +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> > +Description:
> > +		(RO) Contains information needed by applications to provision
> > +		a CPU and monitor status information. The layout of this file
> > +		is determined by the GUID in this folder. Information about the
> > +		layout for a particular GUID is available at
> > +		http://github.com/intel/intel-sdsi
> > +
> > +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/pro
> > vision_akc
> > +Date:		Nov 2021
> > +KernelVersion:	5.17
> > +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> > +Description:
> > +		(WO) Used to write an Authentication Key Certificate (AKC) to
> > +		the SDSi NVRAM for the CPU. The AKC is used to authentication a
> > +		Capability Activation Payload. Mailbox command.
> 
> s/used to authentication/used to authenticate/

Ack

> 
> > +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/pro
> > vision_cap
> > +Date:		Nov 2021
> > +KernelVersion:	5.17
> > +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> > +Description:
> > +		(WO) Used to write a Capability Activation Payload (CAP) to the
> > +		SDSi NVRAM for the CPU. CAP files are used to activate a given
> > +		CPU feature. The CAP file is validated by SDSi hardware using a
> > +		previously provision AKC file. Upon successful authentication,
> > the
> > +		CPU configuration is updated. A cold reboot is required to fully
> > +		activate the feature. Mailbox command.
> 
> "CAP file" sounds like it might be redundant.  It *seems* like the
> *payload* is what will be validated by SDSi and activate the feature.
> Not sure "file" is meaningful if this is really talking about the
> content of the CAP.
> 
> s/previously provision/previously provisioned/

Ack

David

> 
> > +What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/rea
> > d_state_cert
> > +Date:		Nov 2021
> > +KernelVersion:	5.17
> > +Contact:	"David E. Box" <david.e.box@linux.intel.com>
> > +Description:
> > +		(RO) Used to read back the current State Certificate for the CPU
> > +		from SDSi hardware. The State Certificate contains information
> > +		about the current licenses on the CPU. Mailbox command.
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-driver-intel_sdsi b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
new file mode 100644
index 000000000000..32a017ed3dd3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
@@ -0,0 +1,75 @@ 
+What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X
+Date:		Nov 2021
+KernelVersion:	5.17
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		This folder contains interface files for accessing Intel
+		Software Defined Silicon (SDSi) features on a CPU. X
+		represent the socket instance (though not the socket id).
+
+		Some files communicate with SDSi hardware through a mailbox.
+		Should the operation fail, one of the following error codes
+		may be returned:
+
+		Error Code	Cause
+	        ----------	-----
+	        EIO		General mailbox failure. Log may indicate cause.
+	        EBUSY		Mailbox is owned by another agent.
+	        EPERM		SDSI capability is not enabled in hardware.
+	        EPROTO		Failure in mailbox protocol detected by driver.
+				See log for details.
+	        EOVERFLOW	For provision commands, the size of the data
+				exceeds what may be written.
+	        ESPIPE		Seeking is not allowed.
+	        ETIMEDOUT	Failure to complete mailbox transaction in time.
+
+What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/guid
+Date:		Nov 2021
+KernelVersion:	5.17
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(RO) The GUID for the registers file. The GUID identifies
+		the register layout of the registers file in this folder.
+		Information about the register layouts for a particular GUID
+		is available at http://github.com/intel/intel-sdsi
+
+What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/registers
+Date:		Nov 2021
+KernelVersion:	5.17
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(RO) Contains information needed by applications to provision
+		a CPU and monitor status information. The layout of this file
+		is determined by the GUID in this folder. Information about the
+		layout for a particular GUID is available at
+		http://github.com/intel/intel-sdsi
+
+What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/provision_akc
+Date:		Nov 2021
+KernelVersion:	5.17
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(WO) Used to write an Authentication Key Certificate (AKC) to
+		the SDSi NVRAM for the CPU. The AKC is used to authentication a
+		Capability Activation Payload. Mailbox command.
+
+What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/provision_cap
+Date:		Nov 2021
+KernelVersion:	5.17
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(WO) Used to write a Capability Activation Payload (CAP) to the
+		SDSi NVRAM for the CPU. CAP files are used to activate a given
+		CPU feature. The CAP file is validated by SDSi hardware using a
+		previously provision AKC file. Upon successful authentication, the
+		CPU configuration is updated. A cold reboot is required to fully
+		activate the feature. Mailbox command.
+
+What:		/sys/bus/auxiliary/devices/intel_extended_cap.sdsi.X/read_state_cert
+Date:		Nov 2021
+KernelVersion:	5.17
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(RO) Used to read back the current State Certificate for the CPU
+		from SDSi hardware. The State Certificate contains information
+		about the current licenses on the CPU. Mailbox command.
diff --git a/MAINTAINERS b/MAINTAINERS
index e38ef3e789bb..0a1237802757 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9772,6 +9772,11 @@  S:	Maintained
 F:	arch/x86/include/asm/intel_scu_ipc.h
 F:	drivers/platform/x86/intel_scu_*
 
+INTEL SDSI DRIVER
+M:	David E. Box <david.e.box@linux.intel.com>
+S:	Supported
+F:	drivers/platform/x86/intel/sdsi.c
+
 INTEL SKYLAKE INT3472 ACPI DEVICE DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
 S:	Maintained
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 35a5d1a5eba8..0c24b626c6ed 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -147,6 +147,18 @@  config INTEL_RST
 	  firmware will copy the memory contents back to RAM and resume the OS
 	  as usual.
 
+config INTEL_SDSI
+	tristate "Intel Software Defined Silicon Driver"
+	depends on INTEL_VSEC
+	depends on X86_64
+	help
+	  This driver enables access to the Intel Software Defined Silicon
+	  interface used to provision silicon features with an authentication
+	  certificate and capability license.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_sdsi.
+
 config INTEL_SMARTCONNECT
 	tristate "Intel Smart Connect disabling driver"
 	depends on ACPI
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index 8ecdf709fb17..6a3a4510d89a 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -26,6 +26,8 @@  intel_int0002_vgpio-y			:= int0002_vgpio.o
 obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
 intel_oaktrail-y			:= oaktrail.o
 obj-$(CONFIG_INTEL_OAKTRAIL)		+= intel_oaktrail.o
+intel_sdsi-y				:= sdsi.o
+obj-$(CONFIG_INTEL_SDSI)		+= intel_sdsi.o
 intel_vsec-y				:= vsec.o
 obj-$(CONFIG_INTEL_VSEC)		+= intel_vsec.o
 
diff --git a/drivers/platform/x86/intel/sdsi.c b/drivers/platform/x86/intel/sdsi.c
new file mode 100644
index 000000000000..6851330ed4ac
--- /dev/null
+++ b/drivers/platform/x86/intel/sdsi.c
@@ -0,0 +1,571 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Software Defined Silicon driver
+ *
+ * Copyright (c) 2021, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Author: "David E. Box" <david.e.box@linux.intel.com>
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#include "vsec.h"
+
+#define ACCESS_TYPE_BARID		2
+#define ACCESS_TYPE_LOCAL		3
+
+#define SDSI_MIN_SIZE_DWORDS		276
+#define SDSI_SIZE_CONTROL		8
+#define SDSI_SIZE_MAILBOX		1024
+#define SDSI_SIZE_REGS			72
+#define SDSI_SIZE_CMD			sizeof(u64)
+
+/*
+ * Write messages are currently up to the size of the mailbox
+ * while read messages are up to 4 times the size of the
+ * mailbox, sent in packets
+ */
+#define SDSI_SIZE_WRITE_MSG		SDSI_SIZE_MAILBOX
+#define SDSI_SIZE_READ_MSG		(SDSI_SIZE_MAILBOX * 4)
+
+#define SDSI_ENABLED_FEATURES_OFFSET	16
+#define SDSI_ENABLED			BIT(3)
+#define SDSI_SOCKET_ID_OFFSET		64
+#define SDSI_SOCKET_ID			GENMASK(3, 0)
+
+#define SDSI_MBOX_CMD_SUCCESS		0x40
+#define SDSI_MBOX_CMD_TIMEOUT		0x80
+
+#define MBOX_TIMEOUT_US			2000
+#define MBOX_TIMEOUT_ACQUIRE_US		1000
+#define MBOX_POLLING_PERIOD_US		100
+#define MBOX_MAX_PACKETS		4
+
+#define MBOX_OWNER_NONE			0x00
+#define MBOX_OWNER_INBAND		0x01
+
+#define CTRL_RUN_BUSY			BIT(0)
+#define CTRL_READ_WRITE			BIT(1)
+#define CTRL_SOM			BIT(2)
+#define CTRL_EOM			BIT(3)
+#define CTRL_OWNER			GENMASK(5, 4)
+#define CTRL_COMPLETE			BIT(6)
+#define CTRL_READY			BIT(7)
+#define CTRL_STATUS			GENMASK(15, 8)
+#define CTRL_PACKET_SIZE		GENMASK(31, 16)
+#define CTRL_MSG_SIZE			GENMASK(63, 48)
+
+#define DISC_TABLE_SIZE			12
+#define DT_ACCESS_TYPE			GENMASK(3, 0)
+#define DT_SIZE				GENMASK(27, 12)
+#define DT_TBIR				GENMASK(2, 0)
+#define DT_OFFSET(v)			((v) & GENMASK(31, 3))
+
+enum sdsi_command {
+	SDSI_CMD_PROVISION_AKC		= 0x04,
+	SDSI_CMD_PROVISION_CAP		= 0x08,
+	SDSI_CMD_READ_STATE		= 0x10,
+};
+
+struct sdsi_mbox_info {
+	u64	*payload;
+	u64	*buffer;
+	int	size;
+};
+
+struct disc_table {
+	u32	access_info;
+	u32	guid;
+	u32	offset;
+};
+
+struct sdsi_priv {
+	struct mutex		mb_lock;	/* Mailbox access lock */
+	struct device		*dev;
+	void __iomem		*control_addr;
+	void __iomem		*mbox_addr;
+	void __iomem		*regs_addr;
+	u32			guid;
+	bool			sdsi_enabled;
+};
+
+static struct bin_attribute bin_attr_provision_akc;
+static struct bin_attribute bin_attr_provision_cap;
+
+/* SDSi mailbox operations must be performed using 64bit mov instructions */
+static __always_inline void
+sdsi_memcpy64_toio(u64 __iomem *to, const u64 *from, size_t count_bytes)
+{
+	size_t count = count_bytes / sizeof(*to);
+	int i;
+
+	for (i = 0; i < count; i++)
+		writeq(from[i], &to[i]);
+}
+
+static __always_inline void
+sdsi_memcpy64_fromio(u64 *to, const u64 __iomem *from, size_t count_bytes)
+{
+	size_t count = count_bytes / sizeof(*to);
+	int i;
+
+	for (i = 0; i < count; i++)
+		to[i] = readq(&from[i]);
+}
+
+static inline void sdsi_complete_transaction(struct sdsi_priv *priv)
+{
+	u64 control = FIELD_PREP(CTRL_COMPLETE, 1);
+
+	lockdep_assert_held(&priv->mb_lock);
+	writeq(control, priv->control_addr);
+}
+
+static int sdsi_status_to_errno(u32 status)
+{
+	switch (status) {
+	case SDSI_MBOX_CMD_SUCCESS:
+		return 0;
+	case SDSI_MBOX_CMD_TIMEOUT:
+		return -ETIMEDOUT;
+	default:
+		return -EIO;
+	}
+}
+
+static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, int *data_size)
+{
+	struct device *dev = priv->dev;
+	u32 total, loop, eom, status, message_size;
+	u64 control;
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	/* Format and send the read command */
+	control = FIELD_PREP(CTRL_EOM, 1) |
+		  FIELD_PREP(CTRL_SOM, 1) |
+		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
+		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
+	writeq(control, priv->control_addr);
+
+	/* For reads, data sizes that are larger than the mailbox size are read in packets. */
+	total = 0;
+	loop = 0;
+	do {
+		int offset = SDSI_SIZE_MAILBOX * loop;
+		void __iomem *addr = priv->mbox_addr + offset;
+		u64 *buf = info->buffer + offset / SDSI_SIZE_CMD;
+		u32 packet_size;
+
+		/* Poll on ready bit */
+		ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY,
+					 MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US);
+		if (ret)
+			break;
+
+		eom = FIELD_GET(CTRL_EOM, control);
+		status = FIELD_GET(CTRL_STATUS, control);
+		packet_size = FIELD_GET(CTRL_PACKET_SIZE, control);
+		message_size = FIELD_GET(CTRL_MSG_SIZE, control);
+
+		ret = sdsi_status_to_errno(status);
+		if (ret)
+			break;
+
+		/* Only the last packet can be less than the mailbox size. */
+		if (!eom && packet_size != SDSI_SIZE_MAILBOX) {
+			dev_err(dev, "Invalid packet size\n");
+			ret = -EPROTO;
+			break;
+		}
+
+		if (packet_size > SDSI_SIZE_MAILBOX) {
+			dev_err(dev, "Packet size to large\n");
+			ret = -EPROTO;
+			break;
+		}
+
+		sdsi_memcpy64_fromio(buf, addr, round_up(packet_size, SDSI_SIZE_CMD));
+
+		total += packet_size;
+
+		sdsi_complete_transaction(priv);
+	} while (!eom && ++loop < MBOX_MAX_PACKETS);
+
+	if (ret) {
+		sdsi_complete_transaction(priv);
+		return ret;
+	}
+
+	if (!eom) {
+		dev_err(dev, "Exceeded read attempts\n");
+		return -EPROTO;
+	}
+
+	/* Message size check is only valid for multi-packet transfers */
+	if (loop && total != message_size)
+		dev_warn(dev, "Read count %d differs from expected count %d\n",
+			 total, message_size);
+
+	*data_size = total;
+
+	return 0;
+}
+
+static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
+{
+	u64 control;
+	u32 status;
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	/* Write rest of the payload */
+	sdsi_memcpy64_toio(priv->mbox_addr + SDSI_SIZE_CMD, info->payload + 1,
+			   info->size - SDSI_SIZE_CMD);
+
+	/* Format and send the write command */
+	control = FIELD_PREP(CTRL_EOM, 1) |
+		  FIELD_PREP(CTRL_SOM, 1) |
+		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
+		  FIELD_PREP(CTRL_READ_WRITE, 1) |
+		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
+	writeq(control, priv->control_addr);
+
+	/* Poll on run_busy bit */
+	ret = readq_poll_timeout(priv->control_addr, control, !(control & CTRL_RUN_BUSY),
+				 MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US);
+
+	if (ret)
+		goto release_mbox;
+
+	status = FIELD_GET(CTRL_STATUS, control);
+	ret = sdsi_status_to_errno(status);
+
+release_mbox:
+	sdsi_complete_transaction(priv);
+
+	return ret;
+}
+
+static int sdsi_mbox_acquire(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
+{
+	u64 control;
+	u32 owner;
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	/* Check mailbox is available */
+	control = readq(priv->control_addr);
+	owner = FIELD_GET(CTRL_OWNER, control);
+	if (owner != MBOX_OWNER_NONE)
+		return -EBUSY;
+
+	/* Write first qword of payload */
+	writeq(info->payload[0], priv->mbox_addr);
+
+	/* Check for ownership */
+	ret = readq_poll_timeout(priv->control_addr, control,
+				 FIELD_GET(CTRL_OWNER, control) & MBOX_OWNER_INBAND,
+				 MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_ACQUIRE_US);
+
+	return ret;
+}
+
+static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	ret = sdsi_mbox_acquire(priv, info);
+	if (ret)
+		return ret;
+
+	return sdsi_mbox_cmd_write(priv, info);
+}
+
+static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, int *data_size)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	ret = sdsi_mbox_acquire(priv, info);
+	if (ret)
+		return ret;
+
+	return sdsi_mbox_cmd_read(priv, info, data_size);
+}
+
+static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count,
+			      enum sdsi_command command)
+{
+	struct sdsi_mbox_info info;
+	int ret;
+
+	if (!priv->sdsi_enabled)
+		return -EPERM;
+
+	if (count > (SDSI_SIZE_WRITE_MSG - SDSI_SIZE_CMD))
+		return -EOVERFLOW;
+
+	/* Qword aligned message + command qword */
+	info.size = round_up(count, SDSI_SIZE_CMD) + SDSI_SIZE_CMD;
+
+	info.payload = kzalloc(info.size, GFP_KERNEL);
+	if (!info.payload)
+		return -ENOMEM;
+
+	/* Copy message to payload buffer */
+	memcpy(info.payload, buf, count);
+
+	/* Command is last qword of payload buffer */
+	info.payload[(info.size - SDSI_SIZE_CMD) / SDSI_SIZE_CMD] = command;
+
+	ret = mutex_lock_interruptible(&priv->mb_lock);
+	if (ret)
+		goto free_payload;
+	ret = sdsi_mbox_write(priv, &info);
+	mutex_unlock(&priv->mb_lock);
+
+free_payload:
+	kfree(info.payload);
+
+	return (ret < 0) ? ret : count;
+}
+
+static ssize_t provision_akc_write(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf, loff_t off,
+				   size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+
+	if (off)
+		return -ESPIPE;
+
+	return sdsi_provision(priv, buf, count, SDSI_CMD_PROVISION_AKC);
+}
+static BIN_ATTR_WO(provision_akc, SDSI_SIZE_WRITE_MSG);
+
+static ssize_t provision_cap_write(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf, loff_t off,
+				   size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+
+	if (off)
+		return -ESPIPE;
+
+	return sdsi_provision(priv, buf, count, SDSI_CMD_PROVISION_CAP);
+}
+static BIN_ATTR_WO(provision_cap, SDSI_SIZE_WRITE_MSG);
+
+static long state_certificate_read(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf, loff_t off,
+				   size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+	u64 command = SDSI_CMD_READ_STATE;
+	struct sdsi_mbox_info info;
+	u32 size;
+	int ret;
+
+	if (!priv->sdsi_enabled)
+		return -EPERM;
+
+	if (off)
+		return -ESPIPE;
+
+	/* Buffer for return data */
+	info.buffer = kmalloc(SDSI_SIZE_READ_MSG, GFP_KERNEL);
+	if (!info.buffer)
+		return -ENOMEM;
+
+	info.payload = &command;
+	info.size = sizeof(command);
+
+	ret = mutex_lock_interruptible(&priv->mb_lock);
+	if (ret)
+		goto free_buffer;
+	ret = sdsi_mbox_read(priv, &info, &size);
+	mutex_unlock(&priv->mb_lock);
+	if (ret < 0)
+		goto free_buffer;
+
+	if (size > count)
+		size = count;
+	else
+		memset(buf, 0, count);
+
+	memcpy(buf, info.buffer, size);
+
+free_buffer:
+	kfree(info.buffer);
+
+	return (ret < 0) ? ret : count;
+}
+static BIN_ATTR(state_certificate, 0400, state_certificate_read, NULL, SDSI_SIZE_READ_MSG);
+
+static ssize_t registers_read(struct file *filp, struct kobject *kobj,
+			      struct bin_attribute *attr, char *buf, loff_t off,
+			      size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+	void __iomem *addr = priv->regs_addr;
+
+	memcpy_fromio(buf, addr + off, count);
+
+	return count;
+}
+static BIN_ATTR(registers, 0400, registers_read, NULL, SDSI_SIZE_REGS);
+
+static struct bin_attribute *sdsi_bin_attrs[] = {
+	&bin_attr_registers,
+	&bin_attr_state_certificate,
+	&bin_attr_provision_akc,
+	&bin_attr_provision_cap,
+	NULL
+};
+
+static ssize_t guid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+
+	return sprintf(buf, "0x%x\n", priv->guid);
+}
+static DEVICE_ATTR_RO(guid);
+
+static struct attribute *sdsi_attrs[] = {
+	&dev_attr_guid.attr,
+	NULL
+};
+
+static const struct attribute_group sdsi_group = {
+	.attrs = sdsi_attrs,
+	.bin_attrs = sdsi_bin_attrs,
+};
+__ATTRIBUTE_GROUPS(sdsi);
+
+static int sdsi_map_mbox_registers(struct sdsi_priv *priv, struct pci_dev *parent,
+				   struct disc_table *disc_table, struct resource *disc_res)
+{
+	u32 access_type = FIELD_GET(DT_ACCESS_TYPE, disc_table->access_info);
+	u32 size = FIELD_GET(DT_SIZE, disc_table->access_info);
+	u32 tbir = FIELD_GET(DT_TBIR, disc_table->offset);
+	u32 offset = DT_OFFSET(disc_table->offset);
+	u32 features_offset;
+	struct resource res = {};
+
+	/* Starting location of SDSi MMIO region based on access type */
+	switch (access_type) {
+	case ACCESS_TYPE_LOCAL:
+		if (tbir) {
+			dev_err(priv->dev, "Unsupported BAR index %d for access type %d\n",
+				tbir, access_type);
+			return -EINVAL;
+		}
+
+		/*
+		 * For access_type LOCAL, the base address is as follows:
+		 * base address = end of discovery region + base offset + 1
+		 */
+		res.start = disc_res->end + offset + 1;
+		break;
+
+	case ACCESS_TYPE_BARID:
+		res.start = pci_resource_start(parent, tbir) + offset;
+		break;
+
+	default:
+		dev_err(priv->dev, "Unrecognized access_type %d\n", access_type);
+		return -EINVAL;
+	}
+
+	res.end = res.start + size * sizeof(u32) - 1;
+	res.flags = IORESOURCE_MEM;
+
+	priv->control_addr = devm_ioremap_resource(priv->dev, &res);
+	if (IS_ERR(priv->control_addr))
+		return PTR_ERR(priv->control_addr);
+
+	priv->mbox_addr = priv->control_addr + SDSI_SIZE_CONTROL;
+	priv->regs_addr = priv->mbox_addr + SDSI_SIZE_MAILBOX;
+
+	features_offset = readq(priv->regs_addr + SDSI_ENABLED_FEATURES_OFFSET);
+	priv->sdsi_enabled = !!(features_offset & SDSI_ENABLED);
+
+	return 0;
+}
+
+static int sdsi_probe(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id)
+{
+	struct intel_vsec_device *intel_cap_dev = auxdev_to_ivdev(auxdev);
+	struct disc_table disc_table;
+	struct resource *disc_res;
+	void __iomem *disc_addr;
+	struct sdsi_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&auxdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &auxdev->dev;
+	mutex_init(&priv->mb_lock);
+	auxiliary_set_drvdata(auxdev, priv);
+
+	/* Get the SDSi discovery table */
+	disc_res = &intel_cap_dev->resource[0];
+	disc_addr = devm_ioremap_resource(&auxdev->dev, disc_res);
+	if (IS_ERR(disc_addr))
+		return PTR_ERR(disc_addr);
+
+	memcpy_fromio(&disc_table, disc_addr, DISC_TABLE_SIZE);
+
+	priv->guid = disc_table.guid;
+
+	/* Map the SDSi mailbox registers */
+	ret = sdsi_map_mbox_registers(priv, intel_cap_dev->pcidev, &disc_table, disc_res);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct auxiliary_device_id sdsi_aux_id_table[] = {
+	{ .name = "intel_vsec.sdsi" },
+	{}
+};
+MODULE_DEVICE_TABLE(auxiliary, sdsi_aux_id_table);
+
+static struct auxiliary_driver sdsi_aux_driver = {
+	.driver = {
+		.dev_groups = sdsi_groups,
+	},
+	.id_table	= sdsi_aux_id_table,
+	.probe		= sdsi_probe,
+};
+module_auxiliary_driver(sdsi_aux_driver);
+
+MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
+MODULE_DESCRIPTION("Intel Software Defined Silicon driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c
index c860fb3d6acd..4fafa2cd6afa 100644
--- a/drivers/platform/x86/intel/vsec.c
+++ b/drivers/platform/x86/intel/vsec.c
@@ -32,6 +32,7 @@ 
 #define TABLE_OFFSET_SHIFT		3
 
 static DEFINE_IDA(intel_vsec_ida);
+static DEFINE_IDA(intel_vsec_sdsi_ida);
 
 /**
  * struct intel_vsec_header - Common fields of Intel VSEC and DVSEC registers.
@@ -63,12 +64,14 @@  enum intel_vsec_id {
 	VSEC_ID_TELEMETRY	= 2,
 	VSEC_ID_WATCHER		= 3,
 	VSEC_ID_CRASHLOG	= 4,
+	VSEC_ID_SDSI		= 65,
 };
 
 static enum intel_vsec_id intel_vsec_allow_list[] = {
 	VSEC_ID_TELEMETRY,
 	VSEC_ID_WATCHER,
 	VSEC_ID_CRASHLOG,
+	VSEC_ID_SDSI,
 };
 
 static const char *intel_vsec_name(enum intel_vsec_id id)
@@ -83,6 +86,9 @@  static const char *intel_vsec_name(enum intel_vsec_id id)
 	case VSEC_ID_CRASHLOG:
 		return "crashlog";
 
+	case VSEC_ID_SDSI:
+		return "sdsi";
+
 	default:
 		return NULL;
 	}
@@ -211,7 +217,11 @@  static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *he
 	intel_vsec_dev->resource = res;
 	intel_vsec_dev->num_resources = header->num_entries;
 	intel_vsec_dev->quirks = quirks;
-	intel_vsec_dev->ida = &intel_vsec_ida;
+
+	if (header->id == VSEC_ID_SDSI)
+		intel_vsec_dev->ida = &intel_vsec_sdsi_ida;
+	else
+		intel_vsec_dev->ida = &intel_vsec_ida;
 
 	return intel_vsec_add_aux(pdev, intel_vsec_dev, intel_vsec_name(header->id));
 }