| Message ID | 20211209211407.8102-4-jim2101024@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | PCI: brcmstb: root port turns on sub-device power | expand |
On Thu, Dec 09, 2021 at 04:14:01PM -0500, Jim Quinlan wrote: > Add bindings for Brcmstb EP voltage regulators. A new mechanism is to be > added to the Linux PCI subsystem that will allocate and turn on/off > regulators. These are standard regulators -- vpcie12v, vpcie3v3, and > vpcie3v3aux -- placed in the DT in the bridge node under the host bridge > device. > > The use of a regulator property in the pcie EP subnode such as > "vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml > file at > > https://github.com/devicetree-org/dt-schema/pull/63 > > Signed-off-by: Jim Quinlan <jim2101024@gmail.com> > --- > .../bindings/pci/brcm,stb-pcie.yaml | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 22f2ef446f18..3e3c8929c97c 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -159,5 +159,24 @@ examples: <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; brcm,enable-ssc; brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; + + /* PCIe bridge, Root Port */ + pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + vpcie3v3-supply = <&vreg7>; + ranges; + + /* PCIe endpoint */ + pci-ep@0,0 { + assigned-addresses = + <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pci14e4,1688"; + }; + }; }; };
Add bindings for Brcmstb EP voltage regulators. A new mechanism is to be added to the Linux PCI subsystem that will allocate and turn on/off regulators. These are standard regulators -- vpcie12v, vpcie3v3, and vpcie3v3aux -- placed in the DT in the bridge node under the host bridge device. The use of a regulator property in the pcie EP subnode such as "vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml file at https://github.com/devicetree-org/dt-schema/pull/63 Signed-off-by: Jim Quinlan <jim2101024@gmail.com> --- .../bindings/pci/brcm,stb-pcie.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)