| Message ID | 20220103233948.198119-6-Mr.Bossman075@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC. | expand |
Quoting Jesse Taube (2022-01-03 15:39:46) > Add clock driver support for i.MXRT1050. > > Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> > Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> What is suggested by for a new driver? > --- > diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig > --- a/drivers/clk/imx/Kconfig > +++ b/drivers/clk/imx/Kconfig > @@ -105,3 +105,8 @@ config CLK_IMX8ULP > select MXC_CLK > help > Build the driver for i.MX8ULP CCM Clock Driver > + > +config CLK_IMXRT1050 > + bool "IMXRT1050 CCM Clock Driver" > + depends on SOC_IMXRT > + select MXC_CLK Please add some help text here. > diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile > index b5e040026dfb..3d9a1e3b5fc6 100644 > --- a/drivers/clk/imx/Makefile > +++ b/drivers/clk/imx/Makefile > @@ -47,3 +47,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o > obj-$(CONFIG_CLK_IMX7D) += clk-imx7d.o > obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o > obj-$(CONFIG_CLK_VF610) += clk-vf610.o > +obj-$(CONFIG_CLK_IMXRT1050) += clk-imxrt1050.o Please keep this sorted, maybe on config symbol name? > diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c > new file mode 100644 > index 000000000000..a2f0e8663030 > --- /dev/null > +++ b/drivers/clk/imx/clk-imxrt1050.c > @@ -0,0 +1,181 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (C) 2021 > + * Author(s): > + * Jesse Taube <Mr.Bossman075@gmail.com> > + * Giulio Benetti <giulio.benetti@benettiengineering.com> > + */ > +#include <linux/mm.h> > +#include <linux/delay.h> > +#include <linux/clk.h> Is this include used? > +#include <linux/io.h> > +#include <linux/clkdev.h> Drop unused includes. > +#include <linux/clk-provider.h> > +#include <linux/err.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> Used? > +#include <linux/sizes.h> > +#include <linux/platform_device.h> > +#include <soc/imx/revision.h> Is this used? > +#include <dt-bindings/clock/imxrt1050-clock.h> > + > +#include "clk.h" > + > +static const char * const pll_ref_sels[] = {"osc", "dummy", }; > +static const char * const per_sels[] = {"ipg_pdof", "osc", }; > +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", }; > +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", }; > +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", }; > +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", }; > +static const char *const pre_periph_sels[] = { > + "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", }; > +static const char *const periph_sels[] = { "pre_periph_sel", "todo", }; > +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; > +static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; > +static const char *const lcdif_sels[] = { > + "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m", > + "pll2_pfd1_594m", "pll3_pfd1_664_62m", }; > +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; > +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; Any chance this can use clk_parent_data instead of string names for parents? > + > +static struct clk_hw **hws; > +static struct clk_hw_onecell_data *clk_hw_data; > + > +static void __init imxrt_clocks_common_init(void __iomem *base) Drop __init and preferably inline this to the callsite. > +{ > + /* Anatop clocks */ > + hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL); > + > + hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel", > + base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); > + hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel", > + base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); > + hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel", > + base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); > + hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel", > + base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); > + > + hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm", > + "pll1_arm_ref_sel", base + 0x0, 0x7f); > + hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys", > + "pll2_sys_ref_sel", base + 0x30, 0x1); > + hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", > + "pll3_usb_otg_ref_sel", base + 0x10, 0x1); > + hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video", > + "pll5_video_ref_sel", base + 0xa0, 0x7f); > + > + /* PLL bypass out */ > + hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1, > + pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); > + hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1, > + pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); > + hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1, > + pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); > + hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, > + pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); > + > + hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel", > + "pll5_video", base + 0xa0, 19, 2); > + hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div", > + "video_post_div_sel", base + 0x170, 30, 2); > + > + hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); > + > + hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0); > + hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1); > + hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2); > + hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1); > + hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3); > +} > + > +static int imxrt1050_clocks_probe(struct platform_device *pdev) > +{ > + void __iomem *ccm_base; > + void __iomem *pll_base; > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + struct device_node *anp; > + int ret; > + > + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, > + IMXRT1050_CLK_END), GFP_KERNEL); > + if (WARN_ON(!clk_hw_data)) > + return -ENOMEM; > + > + clk_hw_data->num = IMXRT1050_CLK_END; > + hws = clk_hw_data->hws; > + > + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); Use clk_parent_data instead and reference the binding name with .fw_name > + > + anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop"); > + pll_base = of_iomap(anp, 0); > + of_node_put(anp); > + if (WARN_ON(!pll_base)) > + return -ENOMEM; > + imxrt_clocks_common_init(pll_base); > + /* CCM clocks */ > + ccm_base = devm_platform_ioremap_resource(pdev, 0); > + if (WARN_ON(IS_ERR(ccm_base))) > + return PTR_ERR(ccm_base); > + > + hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3); > + hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2, > + pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); > + hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1, > + periph_sels, ARRAY_SIZE(periph_sels)); > + hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1, > + usdhc_sels, ARRAY_SIZE(usdhc_sels)); > + hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1, > + usdhc_sels, ARRAY_SIZE(usdhc_sels)); > + hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1, > + lpuart_sels, ARRAY_SIZE(lpuart_sels)); > + hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3, > + lcdif_sels, ARRAY_SIZE(lcdif_sels)); > + hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1, > + per_sels, ARRAY_SIZE(per_sels)); > + hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1, > + semc_alt_sels, ARRAY_SIZE(semc_alt_sels)); > + hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1, > + semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL); > + > + hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3); > + hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2); > + hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5); > + > + hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3); > + hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3); > + hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6); > + hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3); > + hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3); > + > + hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2); > + hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4); > + hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24); > + hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10); > + hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6); > + hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7); > + imx_check_clk_hws(hws, IMXRT1050_CLK_END); > + > + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); > + if (ret < 0) { > + dev_err(dev, "Failed to register clks for i.MXRT1050.\n"); > + imx_unregister_hw_clocks(hws, IMXRT1050_CLK_END); > + return ret; Drop return > + } Newline here please > + return 0; return ret; > +} > +static const struct of_device_id imxrt1050_clk_of_match[] = { > + { .compatible = "fsl,imxrt1050-ccm" }, > + { /* Sentinel */ }, Drop comma please so nothing can come after without causing compile fail. > +}; > +MODULE_DEVICE_TABLE(of, imxrt1050_clk_of_match); > + > +static struct platform_driver imxrt1050_clk_driver = { > + .probe = imxrt1050_clocks_probe, > + .driver = { > + .name = "imxrt1050-ccm", > + .of_match_table = imxrt1050_clk_of_match, > + }, > +}; > +module_platform_driver(imxrt1050_clk_driver); It's not a module though, unless the Kconfig is made into a tristate.
On 1/5/22 18:51, Stephen Boyd wrote: > Quoting Jesse Taube (2022-01-03 15:39:46) >> Add clock driver support for i.MXRT1050. >> >> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> >> Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> > > What is suggested by for a new driver? Uh as far is im aware sugessed by means that he gave the idea/insight for this driver. Basicly he gave me tips on what to do and how i would look into porting this soc. I asked him how he should be given credit this was agreed on. https://www.kernel.org/doc/html/latest/process/submitting-patches.html#using-reported-by-tested-by-reviewed-by-suggested-by-and-fixes > >> --- >> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig >> --- a/drivers/clk/imx/Kconfig >> +++ b/drivers/clk/imx/Kconfig >> @@ -105,3 +105,8 @@ config CLK_IMX8ULP >> select MXC_CLK >> help >> Build the driver for i.MX8ULP CCM Clock Driver >> + >> +config CLK_IMXRT1050 >> + bool "IMXRT1050 CCM Clock Driver" >> + depends on SOC_IMXRT >> + select MXC_CLK > > Please add some help text here. > Will do. >> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile >> index b5e040026dfb..3d9a1e3b5fc6 100644 >> --- a/drivers/clk/imx/Makefile >> +++ b/drivers/clk/imx/Makefile >> @@ -47,3 +47,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o >> obj-$(CONFIG_CLK_IMX7D) += clk-imx7d.o >> obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o >> obj-$(CONFIG_CLK_VF610) += clk-vf610.o >> +obj-$(CONFIG_CLK_IMXRT1050) += clk-imxrt1050.o > > Please keep this sorted, maybe on config symbol name? Ah sorry this happend when I rebased I will fix it. >> diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c >> new file mode 100644 >> index 000000000000..a2f0e8663030 >> --- /dev/null >> +++ b/drivers/clk/imx/clk-imxrt1050.c >> @@ -0,0 +1,181 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * Copyright (C) 2021 >> + * Author(s): >> + * Jesse Taube <Mr.Bossman075@gmail.com> >> + * Giulio Benetti <giulio.benetti@benettiengineering.com> >> + */ >> +#include <linux/mm.h> >> +#include <linux/delay.h> >> +#include <linux/clk.h> > > Is this include used? > >> +#include <linux/io.h> >> +#include <linux/clkdev.h> > > Drop unused includes. > >> +#include <linux/clk-provider.h> >> +#include <linux/err.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/of_irq.h> > > Used? > >> +#include <linux/sizes.h> >> +#include <linux/platform_device.h> >> +#include <soc/imx/revision.h> > > Is this used? I will sort out posibly unused includes thx for pointing it out. >> +#include <dt-bindings/clock/imxrt1050-clock.h> >> + >> +#include "clk.h" >> + >> +static const char * const pll_ref_sels[] = {"osc", "dummy", }; >> +static const char * const per_sels[] = {"ipg_pdof", "osc", }; >> +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", }; >> +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", }; >> +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", }; >> +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", }; >> +static const char *const pre_periph_sels[] = { >> + "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", }; >> +static const char *const periph_sels[] = { "pre_periph_sel", "todo", }; >> +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; >> +static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; >> +static const char *const lcdif_sels[] = { >> + "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m", >> + "pll2_pfd1_594m", "pll3_pfd1_664_62m", }; >> +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; >> +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; > > Any chance this can use clk_parent_data instead of string names for > parents? I copied this from imx8 but if nessasary I will do that. >> + >> +static struct clk_hw **hws; >> +static struct clk_hw_onecell_data *clk_hw_data; >> + >> +static void __init imxrt_clocks_common_init(void __iomem *base) > > Drop __init and preferably inline this to the callsite. Will do. >> +{ >> + /* Anatop clocks */ >> + hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL); >> + >> + hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel", >> + base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel", >> + base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel", >> + base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel", >> + base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + >> + hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm", >> + "pll1_arm_ref_sel", base + 0x0, 0x7f); >> + hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys", >> + "pll2_sys_ref_sel", base + 0x30, 0x1); >> + hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", >> + "pll3_usb_otg_ref_sel", base + 0x10, 0x1); >> + hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video", >> + "pll5_video_ref_sel", base + 0xa0, 0x7f); >> + >> + /* PLL bypass out */ >> + hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1, >> + pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1, >> + pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1, >> + pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, >> + pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); >> + >> + hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel", >> + "pll5_video", base + 0xa0, 19, 2); >> + hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div", >> + "video_post_div_sel", base + 0x170, 30, 2); >> + >> + hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); >> + >> + hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0); >> + hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1); >> + hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2); >> + hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1); >> + hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3); >> +} >> + >> +static int imxrt1050_clocks_probe(struct platform_device *pdev) >> +{ >> + void __iomem *ccm_base; >> + void __iomem *pll_base; >> + struct device *dev = &pdev->dev; >> + struct device_node *np = dev->of_node; >> + struct device_node *anp; >> + int ret; >> + >> + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, >> + IMXRT1050_CLK_END), GFP_KERNEL); >> + if (WARN_ON(!clk_hw_data)) >> + return -ENOMEM; >> + >> + clk_hw_data->num = IMXRT1050_CLK_END; >> + hws = clk_hw_data->hws; >> + >> + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); > > Use clk_parent_data instead and reference the binding name with .fw_name > >> + >> + anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop"); >> + pll_base = of_iomap(anp, 0); >> + of_node_put(anp); >> + if (WARN_ON(!pll_base)) >> + return -ENOMEM; >> + imxrt_clocks_common_init(pll_base); >> + /* CCM clocks */ >> + ccm_base = devm_platform_ioremap_resource(pdev, 0); >> + if (WARN_ON(IS_ERR(ccm_base))) >> + return PTR_ERR(ccm_base); >> + >> + hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3); >> + hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2, >> + pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); >> + hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1, >> + periph_sels, ARRAY_SIZE(periph_sels)); >> + hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1, >> + usdhc_sels, ARRAY_SIZE(usdhc_sels)); >> + hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1, >> + usdhc_sels, ARRAY_SIZE(usdhc_sels)); >> + hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1, >> + lpuart_sels, ARRAY_SIZE(lpuart_sels)); >> + hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3, >> + lcdif_sels, ARRAY_SIZE(lcdif_sels)); >> + hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1, >> + per_sels, ARRAY_SIZE(per_sels)); >> + hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1, >> + semc_alt_sels, ARRAY_SIZE(semc_alt_sels)); >> + hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1, >> + semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL); >> + >> + hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3); >> + hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2); >> + hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5); >> + >> + hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3); >> + hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3); >> + hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6); >> + hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3); >> + hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3); >> + >> + hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2); >> + hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4); >> + hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24); >> + hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10); >> + hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6); >> + hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7); >> + imx_check_clk_hws(hws, IMXRT1050_CLK_END); >> + >> + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); >> + if (ret < 0) { >> + dev_err(dev, "Failed to register clks for i.MXRT1050.\n"); >> + imx_unregister_hw_clocks(hws, IMXRT1050_CLK_END); >> + return ret; > > Drop return > >> + } > > Newline here please > >> + return 0; > > return ret; Ah makes sence. >> +}. >> +static const struct of_device_id imxrt1050_clk_of_match[] = { >> + { .compatible = "fsl,imxrt1050-ccm" }, >> + { /* Sentinel */ }, > > Drop comma please so nothing can come after without causing compile fail. Okay makes sence, but its copied from imx8. >> +}; >> +MODULE_DEVICE_TABLE(of, imxrt1050_clk_of_match); >> + >> +static struct platform_driver imxrt1050_clk_driver = { >> + .probe = imxrt1050_clocks_probe, >> + .driver = { >> + .name = "imxrt1050-ccm", >> + .of_match_table = imxrt1050_clk_of_match, >> + }, >> +}; >> +module_platform_driver(imxrt1050_clk_driver); > > It's not a module though, unless the Kconfig is made into a tristate. Ah okay will look into this.
>> +static const char * const pll_ref_sels[] = {"osc", "dummy", }; >> +static const char * const per_sels[] = {"ipg_pdof", "osc", }; >> +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", }; >> +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", }; >> +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", }; >> +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", }; >> +static const char *const pre_periph_sels[] = { >> + "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", }; >> +static const char *const periph_sels[] = { "pre_periph_sel", "todo", }; >> +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; >> +static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; >> +static const char *const lcdif_sels[] = { >> + "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m", >> + "pll2_pfd1_594m", "pll3_pfd1_664_62m", }; >> +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; >> +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; > > Any chance this can use clk_parent_data instead of string names for > parents? > >> + >> +static struct clk_hw **hws; >> +static struct clk_hw_onecell_data *clk_hw_data; >> + >> +static void __init imxrt_clocks_common_init(void __iomem *base) > > Drop __init and preferably inline this to the callsite. > >> +{ >> + /* Anatop clocks */ >> + hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL); >> + >> + hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel", >> + base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel", >> + base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel", >> + base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel", >> + base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + >> + hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm", >> + "pll1_arm_ref_sel", base + 0x0, 0x7f); >> + hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys", >> + "pll2_sys_ref_sel", base + 0x30, 0x1); >> + hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", >> + "pll3_usb_otg_ref_sel", base + 0x10, 0x1); >> + hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video", >> + "pll5_video_ref_sel", base + 0xa0, 0x7f); >> + >> + /* PLL bypass out */ >> + hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1, >> + pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1, >> + pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1, >> + pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, >> + pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); >> + >> + hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel", >> + "pll5_video", base + 0xa0, 19, 2); >> + hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div", >> + "video_post_div_sel", base + 0x170, 30, 2); >> + >> + hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); >> + >> + hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0); >> + hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1); >> + hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2); >> + hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1); >> + hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3); >> +} >> + >> +static int imxrt1050_clocks_probe(struct platform_device *pdev) >> +{ >> + void __iomem *ccm_base; >> + void __iomem *pll_base; >> + struct device *dev = &pdev->dev; >> + struct device_node *np = dev->of_node; >> + struct device_node *anp; >> + int ret; >> + >> + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, >> + IMXRT1050_CLK_END), GFP_KERNEL); >> + if (WARN_ON(!clk_hw_data)) >> + return -ENOMEM; >> + >> + clk_hw_data->num = IMXRT1050_CLK_END; >> + hws = clk_hw_data->hws; >> + >> + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); > > Use clk_parent_data instead and reference the binding name with .fw_name Hi Stephen, sorry to bother you again. I'm wondering if adding `clk_parent_data` is necessary as it seems like it wold be a big change and the other IMX boards haven't implemented this yet would it be okay if I don't do this, or if it is necessary could you link to a patch set to change it.
Quoting Jesse Taube (2022-01-09 11:07:42) > >> + > >> + clk_hw_data->num = IMXRT1050_CLK_END; > >> + hws = clk_hw_data->hws; > >> + > >> + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); > > > > Use clk_parent_data instead and reference the binding name with .fw_name > > Hi Stephen, sorry to bother you again. > I'm wondering if adding `clk_parent_data` is necessary as it seems like > it wold be a big change and the other IMX boards haven't implemented > this yet would it be okay if I don't do this, or if it is necessary > could you link to a patch set to change it. > Is it a big change because the imx_clk_hw*() APIs aren't prepared for non-string parents? Can you make some clk_parent_data based APIs and migrate things over gradually? This is really a question for i.MX folks to see if anyone is working on moving away from the string names.
On 22-01-10 12:12:00, Stephen Boyd wrote: > Quoting Jesse Taube (2022-01-09 11:07:42) > > >> + > > >> + clk_hw_data->num = IMXRT1050_CLK_END; > > >> + hws = clk_hw_data->hws; > > >> + > > >> + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); > > > > > > Use clk_parent_data instead and reference the binding name with .fw_name > > > > Hi Stephen, sorry to bother you again. > > I'm wondering if adding `clk_parent_data` is necessary as it seems like > > it wold be a big change and the other IMX boards haven't implemented > > this yet would it be okay if I don't do this, or if it is necessary > > could you link to a patch set to change it. > > > > Is it a big change because the imx_clk_hw*() APIs aren't prepared for > non-string parents? Can you make some clk_parent_data based APIs and > migrate things over gradually? This is really a question for i.MX folks > to see if anyone is working on moving away from the string names. I'm currently looking into it. I would suggest we take this patch as is and I'll switch it later on to clk_parent_data.
On 1/10/22 17:48, Abel Vesa wrote: > On 22-01-10 12:12:00, Stephen Boyd wrote: >> Quoting Jesse Taube (2022-01-09 11:07:42) >>>>> + >>>>> + clk_hw_data->num = IMXRT1050_CLK_END; >>>>> + hws = clk_hw_data->hws; >>>>> + >>>>> + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); >>>> >>>> Use clk_parent_data instead and reference the binding name with .fw_name >>> >>> Hi Stephen, sorry to bother you again. >>> I'm wondering if adding `clk_parent_data` is necessary as it seems like >>> it wold be a big change and the other IMX boards haven't implemented >>> this yet would it be okay if I don't do this, or if it is necessary >>> could you link to a patch set to change it. >>> >> >> Is it a big change because the imx_clk_hw*() APIs aren't prepared for >> non-string parents? Can you make some clk_parent_data based APIs and >> migrate things over gradually? This is really a question for i.MX folks >> to see if anyone is working on moving away from the string names. > > I'm currently looking into it. I would suggest we take this patch as is > and I'll switch it later on to clk_parent_data. Thanks so much that would be great! Should I sent the other changes requested I have them ready? Or should i wait. Best regards Jesse Taube
On 22-01-10 19:18:58, Jesse Taube wrote: > > > On 1/10/22 17:48, Abel Vesa wrote: > > On 22-01-10 12:12:00, Stephen Boyd wrote: > > > Quoting Jesse Taube (2022-01-09 11:07:42) > > > > > > + > > > > > > + clk_hw_data->num = IMXRT1050_CLK_END; > > > > > > + hws = clk_hw_data->hws; > > > > > > + > > > > > > + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); > > > > > > > > > > Use clk_parent_data instead and reference the binding name with .fw_name > > > > > > > > Hi Stephen, sorry to bother you again. > > > > I'm wondering if adding `clk_parent_data` is necessary as it seems like > > > > it wold be a big change and the other IMX boards haven't implemented > > > > this yet would it be okay if I don't do this, or if it is necessary > > > > could you link to a patch set to change it. > > > > > > > > > > Is it a big change because the imx_clk_hw*() APIs aren't prepared for > > > non-string parents? Can you make some clk_parent_data based APIs and > > > migrate things over gradually? This is really a question for i.MX folks > > > to see if anyone is working on moving away from the string names. > > > > I'm currently looking into it. I would suggest we take this patch as is > > and I'll switch it later on to clk_parent_data. > Thanks so much that would be great! > > Should I sent the other changes requested I have them ready? Or should i > wait. Sure, send it. If Stephen is OK with my suggestion, I will pick it. > > Best regards > Jesse Taube
Quoting Abel Vesa (2022-01-10 14:48:10) > On 22-01-10 12:12:00, Stephen Boyd wrote: > > Quoting Jesse Taube (2022-01-09 11:07:42) > > > >> + > > > >> + clk_hw_data->num = IMXRT1050_CLK_END; > > > >> + hws = clk_hw_data->hws; > > > >> + > > > >> + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); > > > > > > > > Use clk_parent_data instead and reference the binding name with .fw_name > > > > > > Hi Stephen, sorry to bother you again. > > > I'm wondering if adding `clk_parent_data` is necessary as it seems like > > > it wold be a big change and the other IMX boards haven't implemented > > > this yet would it be okay if I don't do this, or if it is necessary > > > could you link to a patch set to change it. > > > > > > > Is it a big change because the imx_clk_hw*() APIs aren't prepared for > > non-string parents? Can you make some clk_parent_data based APIs and > > migrate things over gradually? This is really a question for i.MX folks > > to see if anyone is working on moving away from the string names. > > I'm currently looking into it. I would suggest we take this patch as is > and I'll switch it later on to clk_parent_data. > Ok sounds like a plan.
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig index c08edbd04d22..f697652ab19c 100644 --- a/drivers/clk/imx/Kconfig +++ b/drivers/clk/imx/Kconfig @@ -105,3 +105,8 @@ config CLK_IMX8ULP select MXC_CLK help Build the driver for i.MX8ULP CCM Clock Driver + +config CLK_IMXRT1050 + bool "IMXRT1050 CCM Clock Driver" + depends on SOC_IMXRT + select MXC_CLK diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index b5e040026dfb..3d9a1e3b5fc6 100644 --- a/drivers/clk/imx/Makefile +++ b/drivers/clk/imx/Makefile @@ -47,3 +47,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o obj-$(CONFIG_CLK_IMX7D) += clk-imx7d.o obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o obj-$(CONFIG_CLK_VF610) += clk-vf610.o +obj-$(CONFIG_CLK_IMXRT1050) += clk-imxrt1050.o diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c new file mode 100644 index 000000000000..a2f0e8663030 --- /dev/null +++ b/drivers/clk/imx/clk-imxrt1050.c @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2021 + * Author(s): + * Jesse Taube <Mr.Bossman075@gmail.com> + * Giulio Benetti <giulio.benetti@benettiengineering.com> + */ +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/sizes.h> +#include <linux/platform_device.h> +#include <soc/imx/revision.h> +#include <dt-bindings/clock/imxrt1050-clock.h> + +#include "clk.h" + +static const char * const pll_ref_sels[] = {"osc", "dummy", }; +static const char * const per_sels[] = {"ipg_pdof", "osc", }; +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", }; +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", }; +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", }; +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", }; +static const char *const pre_periph_sels[] = { + "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", }; +static const char *const periph_sels[] = { "pre_periph_sel", "todo", }; +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; +static const char *const lcdif_sels[] = { + "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m", + "pll2_pfd1_594m", "pll3_pfd1_664_62m", }; +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; + +static struct clk_hw **hws; +static struct clk_hw_onecell_data *clk_hw_data; + +static void __init imxrt_clocks_common_init(void __iomem *base) +{ + /* Anatop clocks */ + hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL); + + hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel", + base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); + hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel", + base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); + hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel", + base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); + hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel", + base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); + + hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm", + "pll1_arm_ref_sel", base + 0x0, 0x7f); + hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys", + "pll2_sys_ref_sel", base + 0x30, 0x1); + hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", + "pll3_usb_otg_ref_sel", base + 0x10, 0x1); + hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video", + "pll5_video_ref_sel", base + 0xa0, 0x7f); + + /* PLL bypass out */ + hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1, + pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1, + pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1, + pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, + pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + + hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel", + "pll5_video", base + 0xa0, 19, 2); + hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div", + "video_post_div_sel", base + 0x170, 30, 2); + + hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + + hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0); + hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1); + hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2); + hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1); + hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3); +} + +static int imxrt1050_clocks_probe(struct platform_device *pdev) +{ + void __iomem *ccm_base; + void __iomem *pll_base; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *anp; + int ret; + + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, + IMXRT1050_CLK_END), GFP_KERNEL); + if (WARN_ON(!clk_hw_data)) + return -ENOMEM; + + clk_hw_data->num = IMXRT1050_CLK_END; + hws = clk_hw_data->hws; + + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); + + anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop"); + pll_base = of_iomap(anp, 0); + of_node_put(anp); + if (WARN_ON(!pll_base)) + return -ENOMEM; + imxrt_clocks_common_init(pll_base); + /* CCM clocks */ + ccm_base = devm_platform_ioremap_resource(pdev, 0); + if (WARN_ON(IS_ERR(ccm_base))) + return PTR_ERR(ccm_base); + + hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3); + hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2, + pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); + hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1, + periph_sels, ARRAY_SIZE(periph_sels)); + hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1, + usdhc_sels, ARRAY_SIZE(usdhc_sels)); + hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1, + usdhc_sels, ARRAY_SIZE(usdhc_sels)); + hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1, + lpuart_sels, ARRAY_SIZE(lpuart_sels)); + hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3, + lcdif_sels, ARRAY_SIZE(lcdif_sels)); + hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1, + per_sels, ARRAY_SIZE(per_sels)); + hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1, + semc_alt_sels, ARRAY_SIZE(semc_alt_sels)); + hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1, + semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL); + + hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3); + hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2); + hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5); + + hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3); + hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3); + hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6); + hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3); + hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3); + + hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2); + hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4); + hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24); + hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10); + hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6); + hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7); + imx_check_clk_hws(hws, IMXRT1050_CLK_END); + + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); + if (ret < 0) { + dev_err(dev, "Failed to register clks for i.MXRT1050.\n"); + imx_unregister_hw_clocks(hws, IMXRT1050_CLK_END); + return ret; + } + return 0; +} +static const struct of_device_id imxrt1050_clk_of_match[] = { + { .compatible = "fsl,imxrt1050-ccm" }, + { /* Sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, imxrt1050_clk_of_match); + +static struct platform_driver imxrt1050_clk_driver = { + .probe = imxrt1050_clocks_probe, + .driver = { + .name = "imxrt1050-ccm", + .of_match_table = imxrt1050_clk_of_match, + }, +}; +module_platform_driver(imxrt1050_clk_driver);
Add clock driver support for i.MXRT1050. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> --- V1->V2: * Kconfig: Add new line * clk-imxrt.c: Remove unused const * clk-imxrt.c: Remove set parents * clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address V2->V3: * Remove unused ANATOP_BASE_ADDR * Move to hw API * Add GPT's own clock * Add SEMC clocks to set muxing to CRITICAL V3->V4: * Rename clk-imxrt.c to clk-imxrt1050.c * Rename CONFIG_CLK_IMXRT to CONFIG_CLK_IMXRT1050 * Make CONFIG_CLK_IMXRT1050 selectable V4->V5: * Move to platform driver V5->V6: * Remove "fsl" from platform driver name V6->V7: * Remove GPT * Remove of_match_ptr --- drivers/clk/imx/Kconfig | 5 + drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imxrt1050.c | 181 ++++++++++++++++++++++++++++++++ 3 files changed, 187 insertions(+) create mode 100644 drivers/clk/imx/clk-imxrt1050.c