Message ID | 20220112174612.10773-21-biju.das.jz@bp.renesas.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Kieran Bingham |
Headers | show |
Series | Add RZ/G2L Display support | expand |
Hi Biju, Thank you for the patch. On Wed, Jan 12, 2022 at 05:46:04PM +0000, Biju Das wrote: > The RZ/G2L VSPD provides a single VSPD instance. it has the following > sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF. > > It does not have version register, so added a new compatible string to > match to get the version value. Also the reset is shared with DU > module. Does it really lack the version register, or is it just not documented ? It hasn't been documented on all R-Car variants, but has consistently been present. > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > --- > drivers/media/platform/vsp1/vsp1.h | 1 + > drivers/media/platform/vsp1/vsp1_drv.c | 31 ++++++++++++++++++++++++- > drivers/media/platform/vsp1/vsp1_lif.c | 7 ++++-- > drivers/media/platform/vsp1/vsp1_regs.h | 1 + > 4 files changed, 37 insertions(+), 3 deletions(-) > > diff --git a/drivers/media/platform/vsp1/vsp1.h b/drivers/media/platform/vsp1/vsp1.h > index 37cf33c7e6ca..b137c0233db5 100644 > --- a/drivers/media/platform/vsp1/vsp1.h > +++ b/drivers/media/platform/vsp1/vsp1.h > @@ -103,6 +103,7 @@ struct vsp1_device { > struct media_entity_operations media_ops; > > struct vsp1_drm *drm; > + struct reset_control *rstc; Could you move this with the toher resources, just after the bus_master field ? > }; > > int vsp1_device_get(struct vsp1_device *vsp1); > diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c > index c9044785b903..c00ba65030fd 100644 > --- a/drivers/media/platform/vsp1/vsp1_drv.c > +++ b/drivers/media/platform/vsp1/vsp1_drv.c > @@ -16,6 +16,7 @@ > #include <linux/of_device.h> > #include <linux/platform_device.h> > #include <linux/pm_runtime.h> > +#include <linux/reset.h> > #include <linux/videodev2.h> > > #include <media/rcar-fcp.h> > @@ -559,6 +560,15 @@ static int vsp1_device_init(struct vsp1_device *vsp1) > */ > int vsp1_device_get(struct vsp1_device *vsp1) > { > + int ret; > + > + if (vsp1->rstc) { > + ret = reset_control_deassert(vsp1->rstc); Adding reset support could be split to a separate patch. > + if (ret < 0) { > + reset_control_assert(vsp1->rstc); Is asserting reset needed here ? > + return ret; > + } > + } > return pm_runtime_resume_and_get(vsp1->dev); > } > > @@ -571,6 +581,8 @@ int vsp1_device_get(struct vsp1_device *vsp1) > void vsp1_device_put(struct vsp1_device *vsp1) > { > pm_runtime_put_sync(vsp1->dev); > + if (vsp1->rstc) > + reset_control_assert(vsp1->rstc); > } > > /* ----------------------------------------------------------------------------- > @@ -787,6 +799,14 @@ static const struct vsp1_device_info vsp1_device_infos[] = { > .uif_count = 2, > .wpf_count = 1, > .num_bru_inputs = 5, > + }, { > + .version = VI6_IP_VERSION_MODEL_VSPD_RZG2L, > + .model = "VSP2-D", > + .gen = 3, > + .features = VSP1_HAS_BRS | VSP1_HAS_WPF_VFLIP | VSP1_HAS_EXT_DL, > + .lif_count = 1, > + .rpf_count = 2, > + .wpf_count = 1, > }, > }; > > @@ -826,6 +846,13 @@ static int vsp1_probe(struct platform_device *pdev) > return ret; > } > > + vsp1->version = (uintptr_t)of_device_get_match_data(&pdev->dev); > + if (vsp1->version == VI6_IP_VERSION_MODEL_VSPD_RZG2L) { > + vsp1->rstc = devm_reset_control_get_shared(&pdev->dev, NULL); > + if (IS_ERR(vsp1->rstc)) > + return PTR_ERR(vsp1->rstc); As the resets DT property is mandatory, and is present in all .dtsi in mainline, should the devm_reset_control_get_shared() call be made for all VSPs ? > + } > + > /* FCP (optional). */ > fcp_node = of_parse_phandle(pdev->dev.of_node, "renesas,fcp", 0); > if (fcp_node) { > @@ -854,7 +881,8 @@ static int vsp1_probe(struct platform_device *pdev) > if (ret < 0) > goto done; > > - vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION); > + if (vsp1->version != VI6_IP_VERSION_MODEL_VSPD_RZG2L) > + vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION); > vsp1_device_put(vsp1); You could condition the whole block of vsp1_device_get(), vsp1_read() and vsp1_device_put() on the version not being set. > > for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) { > @@ -905,6 +933,7 @@ static int vsp1_remove(struct platform_device *pdev) > static const struct of_device_id vsp1_of_match[] = { > { .compatible = "renesas,vsp1" }, > { .compatible = "renesas,vsp2" }, > + { .compatible = "renesas,vsp2-r9a07g044", .data = (void *)VI6_IP_VERSION_MODEL_VSPD_RZG2L }, Let's point to the vsp1_device_infos entry instead. > { }, > }; > MODULE_DEVICE_TABLE(of, vsp1_of_match); > diff --git a/drivers/media/platform/vsp1/vsp1_lif.c b/drivers/media/platform/vsp1/vsp1_lif.c > index 6a6857ac9327..6e997653cfac 100644 > --- a/drivers/media/platform/vsp1/vsp1_lif.c > +++ b/drivers/media/platform/vsp1/vsp1_lif.c > @@ -107,6 +107,7 @@ static void lif_configure_stream(struct vsp1_entity *entity, > > case VI6_IP_VERSION_MODEL_VSPDL_GEN3: > case VI6_IP_VERSION_MODEL_VSPD_V3: > + case VI6_IP_VERSION_MODEL_VSPD_RZG2L: > hbth = 0; > obth = 1500; > lbth = 0; > @@ -135,8 +136,10 @@ static void lif_configure_stream(struct vsp1_entity *entity, > * may appear on the output). The value required by the manual is not > * explained but is likely a buffer size or threshold. > */ > - if ((entity->vsp1->version & VI6_IP_VERSION_MASK) == > - (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M)) > + if (((entity->vsp1->version & VI6_IP_VERSION_MASK) == > + (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M)) || > + ((entity->vsp1->version & VI6_IP_VERSION_MASK) == > + VI6_IP_VERSION_MODEL_VSPD_RZG2L)) > vsp1_lif_write(lif, dlb, VI6_LIF_LBA, > VI6_LIF_LBA_LBA0 | > (1536 << VI6_LIF_LBA_LBA1_SHIFT)); > diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h > index fae7286eb01e..12c5b09885dc 100644 > --- a/drivers/media/platform/vsp1/vsp1_regs.h > +++ b/drivers/media/platform/vsp1/vsp1_regs.h > @@ -766,6 +766,7 @@ > #define VI6_IP_VERSION_MODEL_VSPD_V3 (0x18 << 8) > #define VI6_IP_VERSION_MODEL_VSPDL_GEN3 (0x19 << 8) > #define VI6_IP_VERSION_MODEL_VSPBS_GEN3 (0x1a << 8) > +#define VI6_IP_VERSION_MODEL_VSPD_RZG2L (0x1b << 8) > #define VI6_IP_VERSION_MODEL_VSPD_V3U (0x1c << 8) > > #define VI6_IP_VERSION_SOC_MASK (0xff << 0)
Hi Laurent, Thanks for the feedback. > Subject: Re: [RFC 20/28] media: vsp1: Add support for the RZ/G2L VSPD > > Hi Biju, > > Thank you for the patch. > > On Wed, Jan 12, 2022 at 05:46:04PM +0000, Biju Das wrote: > > The RZ/G2L VSPD provides a single VSPD instance. it has the following > > sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF. > > > > It does not have version register, so added a new compatible string to > > match to get the version value. Also the reset is shared with DU > > module. > > Does it really lack the version register, or is it just not documented ? > It hasn't been documented on all R-Car variants, but has consistently been > present. No, it is not present on RZ/G2L. the read value of this register is 0x0. > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > --- > > drivers/media/platform/vsp1/vsp1.h | 1 + > > drivers/media/platform/vsp1/vsp1_drv.c | 31 > > ++++++++++++++++++++++++- drivers/media/platform/vsp1/vsp1_lif.c | > > 7 ++++-- drivers/media/platform/vsp1/vsp1_regs.h | 1 + > > 4 files changed, 37 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/media/platform/vsp1/vsp1.h > > b/drivers/media/platform/vsp1/vsp1.h > > index 37cf33c7e6ca..b137c0233db5 100644 > > --- a/drivers/media/platform/vsp1/vsp1.h > > +++ b/drivers/media/platform/vsp1/vsp1.h > > @@ -103,6 +103,7 @@ struct vsp1_device { > > struct media_entity_operations media_ops; > > > > struct vsp1_drm *drm; > > + struct reset_control *rstc; > > Could you move this with the toher resources, just after the bus_master > field ? Agreed. > > > }; > > > > int vsp1_device_get(struct vsp1_device *vsp1); diff --git > > a/drivers/media/platform/vsp1/vsp1_drv.c > > b/drivers/media/platform/vsp1/vsp1_drv.c > > index c9044785b903..c00ba65030fd 100644 > > --- a/drivers/media/platform/vsp1/vsp1_drv.c > > +++ b/drivers/media/platform/vsp1/vsp1_drv.c > > @@ -16,6 +16,7 @@ > > #include <linux/of_device.h> > > #include <linux/platform_device.h> > > #include <linux/pm_runtime.h> > > +#include <linux/reset.h> > > #include <linux/videodev2.h> > > > > #include <media/rcar-fcp.h> > > @@ -559,6 +560,15 @@ static int vsp1_device_init(struct vsp1_device > *vsp1) > > */ > > int vsp1_device_get(struct vsp1_device *vsp1) { > > + int ret; > > + > > + if (vsp1->rstc) { > > + ret = reset_control_deassert(vsp1->rstc); > > Adding reset support could be split to a separate patch. Agreed. > > > + if (ret < 0) { > > + reset_control_assert(vsp1->rstc); > > Is asserting reset needed here ? Reset is shared between DU and VSPD. This is just to get balanced reset count like clocks, As I am using shared reset. > > > + return ret; > > + } > > + } > > return pm_runtime_resume_and_get(vsp1->dev); > > } > > > > @@ -571,6 +581,8 @@ int vsp1_device_get(struct vsp1_device *vsp1) > > void vsp1_device_put(struct vsp1_device *vsp1) { > > pm_runtime_put_sync(vsp1->dev); > > + if (vsp1->rstc) > > + reset_control_assert(vsp1->rstc); > > } > > > > /* > > ---------------------------------------------------------------------- > > ------- @@ -787,6 +799,14 @@ static const struct vsp1_device_info > > vsp1_device_infos[] = { > > .uif_count = 2, > > .wpf_count = 1, > > .num_bru_inputs = 5, > > + }, { > > + .version = VI6_IP_VERSION_MODEL_VSPD_RZG2L, > > + .model = "VSP2-D", > > + .gen = 3, > > + .features = VSP1_HAS_BRS | VSP1_HAS_WPF_VFLIP | > VSP1_HAS_EXT_DL, > > + .lif_count = 1, > > + .rpf_count = 2, > > + .wpf_count = 1, > > }, > > }; > > > > @@ -826,6 +846,13 @@ static int vsp1_probe(struct platform_device *pdev) > > return ret; > > } > > > > + vsp1->version = (uintptr_t)of_device_get_match_data(&pdev->dev); > > + if (vsp1->version == VI6_IP_VERSION_MODEL_VSPD_RZG2L) { > > + vsp1->rstc = devm_reset_control_get_shared(&pdev->dev, NULL); > > + if (IS_ERR(vsp1->rstc)) > > + return PTR_ERR(vsp1->rstc); > > As the resets DT property is mandatory, and is present in all .dtsi in > mainline, should the devm_reset_control_get_shared() call be made for all > VSPs ? Agreed. Will call devm_reset_control_get_exclusive for all other VSPs except RZ/G2L, As other VSP's have exclusive resets. > > > + } > > + > > /* FCP (optional). */ > > fcp_node = of_parse_phandle(pdev->dev.of_node, "renesas,fcp", 0); > > if (fcp_node) { > > @@ -854,7 +881,8 @@ static int vsp1_probe(struct platform_device *pdev) > > if (ret < 0) > > goto done; > > > > - vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION); > > + if (vsp1->version != VI6_IP_VERSION_MODEL_VSPD_RZG2L) > > + vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION); > > vsp1_device_put(vsp1); > > You could condition the whole block of vsp1_device_get(), vsp1_read() and > vsp1_device_put() on the version not being set. Agreed. > > > > > for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) { @@ -905,6 > > +933,7 @@ static int vsp1_remove(struct platform_device *pdev) static > > const struct of_device_id vsp1_of_match[] = { > > { .compatible = "renesas,vsp1" }, > > { .compatible = "renesas,vsp2" }, > > + { .compatible = "renesas,vsp2-r9a07g044", .data = (void > > +*)VI6_IP_VERSION_MODEL_VSPD_RZG2L }, > > Let's point to the vsp1_device_infos entry instead. Agreed. Regards, Biju > > > { }, > > }; > > MODULE_DEVICE_TABLE(of, vsp1_of_match); diff --git > > a/drivers/media/platform/vsp1/vsp1_lif.c > > b/drivers/media/platform/vsp1/vsp1_lif.c > > index 6a6857ac9327..6e997653cfac 100644 > > --- a/drivers/media/platform/vsp1/vsp1_lif.c > > +++ b/drivers/media/platform/vsp1/vsp1_lif.c > > @@ -107,6 +107,7 @@ static void lif_configure_stream(struct > > vsp1_entity *entity, > > > > case VI6_IP_VERSION_MODEL_VSPDL_GEN3: > > case VI6_IP_VERSION_MODEL_VSPD_V3: > > + case VI6_IP_VERSION_MODEL_VSPD_RZG2L: > > hbth = 0; > > obth = 1500; > > lbth = 0; > > @@ -135,8 +136,10 @@ static void lif_configure_stream(struct vsp1_entity > *entity, > > * may appear on the output). The value required by the manual is > not > > * explained but is likely a buffer size or threshold. > > */ > > - if ((entity->vsp1->version & VI6_IP_VERSION_MASK) == > > - (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M)) > > + if (((entity->vsp1->version & VI6_IP_VERSION_MASK) == > > + (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M)) || > > + ((entity->vsp1->version & VI6_IP_VERSION_MASK) == > > + VI6_IP_VERSION_MODEL_VSPD_RZG2L)) > > vsp1_lif_write(lif, dlb, VI6_LIF_LBA, > > VI6_LIF_LBA_LBA0 | > > (1536 << VI6_LIF_LBA_LBA1_SHIFT)); diff --git > > a/drivers/media/platform/vsp1/vsp1_regs.h > > b/drivers/media/platform/vsp1/vsp1_regs.h > > index fae7286eb01e..12c5b09885dc 100644 > > --- a/drivers/media/platform/vsp1/vsp1_regs.h > > +++ b/drivers/media/platform/vsp1/vsp1_regs.h > > @@ -766,6 +766,7 @@ > > #define VI6_IP_VERSION_MODEL_VSPD_V3 (0x18 << 8) > > #define VI6_IP_VERSION_MODEL_VSPDL_GEN3 (0x19 << 8) > > #define VI6_IP_VERSION_MODEL_VSPBS_GEN3 (0x1a << 8) > > +#define VI6_IP_VERSION_MODEL_VSPD_RZG2L (0x1b << 8) > > #define VI6_IP_VERSION_MODEL_VSPD_V3U (0x1c << 8) > > > > #define VI6_IP_VERSION_SOC_MASK (0xff << 0) > > -- > Regards, > > Laurent Pinchart
Hi Biju, On Sun, Jan 23, 2022 at 4:20 PM Biju Das <biju.das.jz@bp.renesas.com> wrote: > > On Wed, Jan 12, 2022 at 05:46:04PM +0000, Biju Das wrote: > > > The RZ/G2L VSPD provides a single VSPD instance. it has the following > > > sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF. > > > > > > It does not have version register, so added a new compatible string to > > > match to get the version value. Also the reset is shared with DU > > > module. > > > > Does it really lack the version register, or is it just not documented ? > > It hasn't been documented on all R-Car variants, but has consistently been > > present. > > No, it is not present on RZ/G2L. the read value of this register is 0x0. Just to be sure: you did check that while the module clock is enabled and the module reset is deasserted? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Geert, Thanks for the feedback. > Subject: Re: [RFC 20/28] media: vsp1: Add support for the RZ/G2L VSPD > > Hi Biju, > > On Sun, Jan 23, 2022 at 4:20 PM Biju Das <biju.das.jz@bp.renesas.com> > wrote: > > > On Wed, Jan 12, 2022 at 05:46:04PM +0000, Biju Das wrote: > > > > The RZ/G2L VSPD provides a single VSPD instance. it has the > > > > following sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF. > > > > > > > > It does not have version register, so added a new compatible > > > > string to match to get the version value. Also the reset is shared > > > > with DU module. > > > > > > Does it really lack the version register, or is it just not documented > ? > > > It hasn't been documented on all R-Car variants, but has > > > consistently been present. > > > > No, it is not present on RZ/G2L. the read value of this register is 0x0. > > Just to be sure: you did check that while the module clock is enabled and > the module reset is deasserted? Yes, while display is active, please find the devmem value for version register. root@smarc-rzg2l:~# devmem2 0x10873f00 /dev/mem opened. Memory mapped at address 0xffffa43be000. Read at address 0x10873F00 (0xffffa43bef00): 0x00000000 But it has version register for FCPVD, value is 0x109. root@smarc-rzg2l:~# devmem2 0x10880000 /dev/mem opened. Memory mapped at address 0xffff99899000. Read at address 0x10880000 (0xffff99899000): 0x00000109 root@smarc-rzg2l:~# Regards, Biju
diff --git a/drivers/media/platform/vsp1/vsp1.h b/drivers/media/platform/vsp1/vsp1.h index 37cf33c7e6ca..b137c0233db5 100644 --- a/drivers/media/platform/vsp1/vsp1.h +++ b/drivers/media/platform/vsp1/vsp1.h @@ -103,6 +103,7 @@ struct vsp1_device { struct media_entity_operations media_ops; struct vsp1_drm *drm; + struct reset_control *rstc; }; int vsp1_device_get(struct vsp1_device *vsp1); diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c index c9044785b903..c00ba65030fd 100644 --- a/drivers/media/platform/vsp1/vsp1_drv.c +++ b/drivers/media/platform/vsp1/vsp1_drv.c @@ -16,6 +16,7 @@ #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/reset.h> #include <linux/videodev2.h> #include <media/rcar-fcp.h> @@ -559,6 +560,15 @@ static int vsp1_device_init(struct vsp1_device *vsp1) */ int vsp1_device_get(struct vsp1_device *vsp1) { + int ret; + + if (vsp1->rstc) { + ret = reset_control_deassert(vsp1->rstc); + if (ret < 0) { + reset_control_assert(vsp1->rstc); + return ret; + } + } return pm_runtime_resume_and_get(vsp1->dev); } @@ -571,6 +581,8 @@ int vsp1_device_get(struct vsp1_device *vsp1) void vsp1_device_put(struct vsp1_device *vsp1) { pm_runtime_put_sync(vsp1->dev); + if (vsp1->rstc) + reset_control_assert(vsp1->rstc); } /* ----------------------------------------------------------------------------- @@ -787,6 +799,14 @@ static const struct vsp1_device_info vsp1_device_infos[] = { .uif_count = 2, .wpf_count = 1, .num_bru_inputs = 5, + }, { + .version = VI6_IP_VERSION_MODEL_VSPD_RZG2L, + .model = "VSP2-D", + .gen = 3, + .features = VSP1_HAS_BRS | VSP1_HAS_WPF_VFLIP | VSP1_HAS_EXT_DL, + .lif_count = 1, + .rpf_count = 2, + .wpf_count = 1, }, }; @@ -826,6 +846,13 @@ static int vsp1_probe(struct platform_device *pdev) return ret; } + vsp1->version = (uintptr_t)of_device_get_match_data(&pdev->dev); + if (vsp1->version == VI6_IP_VERSION_MODEL_VSPD_RZG2L) { + vsp1->rstc = devm_reset_control_get_shared(&pdev->dev, NULL); + if (IS_ERR(vsp1->rstc)) + return PTR_ERR(vsp1->rstc); + } + /* FCP (optional). */ fcp_node = of_parse_phandle(pdev->dev.of_node, "renesas,fcp", 0); if (fcp_node) { @@ -854,7 +881,8 @@ static int vsp1_probe(struct platform_device *pdev) if (ret < 0) goto done; - vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION); + if (vsp1->version != VI6_IP_VERSION_MODEL_VSPD_RZG2L) + vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION); vsp1_device_put(vsp1); for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) { @@ -905,6 +933,7 @@ static int vsp1_remove(struct platform_device *pdev) static const struct of_device_id vsp1_of_match[] = { { .compatible = "renesas,vsp1" }, { .compatible = "renesas,vsp2" }, + { .compatible = "renesas,vsp2-r9a07g044", .data = (void *)VI6_IP_VERSION_MODEL_VSPD_RZG2L }, { }, }; MODULE_DEVICE_TABLE(of, vsp1_of_match); diff --git a/drivers/media/platform/vsp1/vsp1_lif.c b/drivers/media/platform/vsp1/vsp1_lif.c index 6a6857ac9327..6e997653cfac 100644 --- a/drivers/media/platform/vsp1/vsp1_lif.c +++ b/drivers/media/platform/vsp1/vsp1_lif.c @@ -107,6 +107,7 @@ static void lif_configure_stream(struct vsp1_entity *entity, case VI6_IP_VERSION_MODEL_VSPDL_GEN3: case VI6_IP_VERSION_MODEL_VSPD_V3: + case VI6_IP_VERSION_MODEL_VSPD_RZG2L: hbth = 0; obth = 1500; lbth = 0; @@ -135,8 +136,10 @@ static void lif_configure_stream(struct vsp1_entity *entity, * may appear on the output). The value required by the manual is not * explained but is likely a buffer size or threshold. */ - if ((entity->vsp1->version & VI6_IP_VERSION_MASK) == - (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M)) + if (((entity->vsp1->version & VI6_IP_VERSION_MASK) == + (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M)) || + ((entity->vsp1->version & VI6_IP_VERSION_MASK) == + VI6_IP_VERSION_MODEL_VSPD_RZG2L)) vsp1_lif_write(lif, dlb, VI6_LIF_LBA, VI6_LIF_LBA_LBA0 | (1536 << VI6_LIF_LBA_LBA1_SHIFT)); diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h index fae7286eb01e..12c5b09885dc 100644 --- a/drivers/media/platform/vsp1/vsp1_regs.h +++ b/drivers/media/platform/vsp1/vsp1_regs.h @@ -766,6 +766,7 @@ #define VI6_IP_VERSION_MODEL_VSPD_V3 (0x18 << 8) #define VI6_IP_VERSION_MODEL_VSPDL_GEN3 (0x19 << 8) #define VI6_IP_VERSION_MODEL_VSPBS_GEN3 (0x1a << 8) +#define VI6_IP_VERSION_MODEL_VSPD_RZG2L (0x1b << 8) #define VI6_IP_VERSION_MODEL_VSPD_V3U (0x1c << 8) #define VI6_IP_VERSION_SOC_MASK (0xff << 0)
The RZ/G2L VSPD provides a single VSPD instance. it has the following sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF. It does not have version register, so added a new compatible string to match to get the version value. Also the reset is shared with DU module. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- drivers/media/platform/vsp1/vsp1.h | 1 + drivers/media/platform/vsp1/vsp1_drv.c | 31 ++++++++++++++++++++++++- drivers/media/platform/vsp1/vsp1_lif.c | 7 ++++-- drivers/media/platform/vsp1/vsp1_regs.h | 1 + 4 files changed, 37 insertions(+), 3 deletions(-)