diff mbox series

[v2,3/4] drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) mode

Message ID 20220307175955.363057-4-kieran.bingham+renesas@ideasonboard.com (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series drm/bridge: ti-sn65dsi86: Support non-eDP DisplayPort connectors | expand

Commit Message

Kieran Bingham March 7, 2022, 5:59 p.m. UTC
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Despite the SN65DSI86 being an eDP bridge, on some systems its output is
routed to a DisplayPort connector. Enable DisplayPort mode when the next
component in the display pipeline is detected as a DisplayPort
connector, and disable eDP features in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reworked to set bridge type based on the next bridge/connector.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
--
Changes since v1/RFC:
 - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to
   devm_drm_of_get_bridge"
 - eDP/DP mode determined from the next bridge connector type.

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

Comments

Doug Anderson March 7, 2022, 11:22 p.m. UTC | #1
Hi,

On Mon, Mar 7, 2022 at 10:00 AM Kieran Bingham
<kieran.bingham+renesas@ideasonboard.com> wrote:
>
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>
> Despite the SN65DSI86 being an eDP bridge, on some systems its output is
> routed to a DisplayPort connector. Enable DisplayPort mode when the next
> component in the display pipeline is detected as a DisplayPort
> connector, and disable eDP features in that case.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Reworked to set bridge type based on the next bridge/connector.
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> --
> Changes since v1/RFC:
>  - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to
>    devm_drm_of_get_bridge"
>  - eDP/DP mode determined from the next bridge connector type.
>
>  drivers/gpu/drm/bridge/ti-sn65dsi86.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> index 29f5f7123ed9..461f963faa0b 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> @@ -60,6 +60,7 @@
>  #define SN_LN_ASSIGN_REG                       0x59
>  #define  LN_ASSIGN_WIDTH                       2
>  #define SN_ENH_FRAME_REG                       0x5A
> +#define  ASSR_CONTROL                          BIT(0)
>  #define  VSTREAM_ENABLE                                BIT(3)
>  #define  LN_POLRS_OFFSET                       4
>  #define  LN_POLRS_MASK                         0xf0
> @@ -91,6 +92,8 @@
>  #define SN_DATARATE_CONFIG_REG                 0x94
>  #define  DP_DATARATE_MASK                      GENMASK(7, 5)
>  #define  DP_DATARATE(x)                                ((x) << 5)
> +#define SN_TRAINING_SETTING_REG                        0x95
> +#define  SCRAMBLE_DISABLE                      BIT(4)
>  #define SN_ML_TX_MODE_REG                      0x96
>  #define  ML_TX_MAIN_LINK_OFF                   0
>  #define  ML_TX_NORMAL_MODE                     BIT(0)
> @@ -1005,6 +1008,11 @@ static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
>         regmap_update_bits(pdata->regmap, SN_DATARATE_CONFIG_REG,
>                            DP_DATARATE_MASK, DP_DATARATE(dp_rate_idx));
>
> +       /* For DisplayPort, use the standard DP scrambler seed. */
> +       if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> +               regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG,
> +                                  ASSR_CONTROL, 0);

I thought it was agreed that this hunk wasn't doing anything and
should be removed? I did some research previously [1] and the manual
said that this bit is "read only" unless "TEST2" is pulled high. In
the previous discussion Laurent said that it wasn't. I also pointed
out that this conflicts with the bit of code in ti_sn_bridge_enable()
which tells the sink to enable the alternate scrambler.


>         /* enable DP PLL */
>         regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);
>
> @@ -1016,6 +1024,11 @@ static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
>                 goto exit;
>         }
>
> +       /* For DisplayPort, disable scrambling mode. */
> +       if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> +               regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG,
> +                                  SCRAMBLE_DISABLE, SCRAMBLE_DISABLE);

In my previous review I asked for some comments to include the "why"
we disabling scrambling mode for DP. Can you please add that?

I also presume that for DP it's probably a good idea to avoid the code
in ti_sn_bridge_enable() that tells the sink to use the alternate
scrambler.


[1] https://lore.kernel.org/r/CAD=FV=Wwayx1Y-xv=RPuJbG+Q1wHrUWgh4P7wuzy_bAL=_FN0g@mail.gmail.com

-Doug
Kieran Bingham March 9, 2022, 5:04 p.m. UTC | #2
Quoting Doug Anderson (2022-03-07 23:22:00)
> Hi,
> 
> On Mon, Mar 7, 2022 at 10:00 AM Kieran Bingham
> <kieran.bingham+renesas@ideasonboard.com> wrote:
> >
> > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> >
> > Despite the SN65DSI86 being an eDP bridge, on some systems its output is
> > routed to a DisplayPort connector. Enable DisplayPort mode when the next
> > component in the display pipeline is detected as a DisplayPort
> > connector, and disable eDP features in that case.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > Reworked to set bridge type based on the next bridge/connector.
> > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > --
> > Changes since v1/RFC:
> >  - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to
> >    devm_drm_of_get_bridge"
> >  - eDP/DP mode determined from the next bridge connector type.
> >
> >  drivers/gpu/drm/bridge/ti-sn65dsi86.c | 16 +++++++++++++++-
> >  1 file changed, 15 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > index 29f5f7123ed9..461f963faa0b 100644
> > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > @@ -60,6 +60,7 @@
> >  #define SN_LN_ASSIGN_REG                       0x59
> >  #define  LN_ASSIGN_WIDTH                       2
> >  #define SN_ENH_FRAME_REG                       0x5A
> > +#define  ASSR_CONTROL                          BIT(0)
> >  #define  VSTREAM_ENABLE                                BIT(3)
> >  #define  LN_POLRS_OFFSET                       4
> >  #define  LN_POLRS_MASK                         0xf0
> > @@ -91,6 +92,8 @@
> >  #define SN_DATARATE_CONFIG_REG                 0x94
> >  #define  DP_DATARATE_MASK                      GENMASK(7, 5)
> >  #define  DP_DATARATE(x)                                ((x) << 5)
> > +#define SN_TRAINING_SETTING_REG                        0x95
> > +#define  SCRAMBLE_DISABLE                      BIT(4)
> >  #define SN_ML_TX_MODE_REG                      0x96
> >  #define  ML_TX_MAIN_LINK_OFF                   0
> >  #define  ML_TX_NORMAL_MODE                     BIT(0)
> > @@ -1005,6 +1008,11 @@ static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
> >         regmap_update_bits(pdata->regmap, SN_DATARATE_CONFIG_REG,
> >                            DP_DATARATE_MASK, DP_DATARATE(dp_rate_idx));
> >
> > +       /* For DisplayPort, use the standard DP scrambler seed. */
> > +       if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> > +               regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG,
> > +                                  ASSR_CONTROL, 0);
> 
> I thought it was agreed that this hunk wasn't doing anything and
> should be removed? I did some research previously [1] and the manual
> said that this bit is "read only" unless "TEST2" is pulled high. In
> the previous discussion Laurent said that it wasn't. I also pointed
> out that this conflicts with the bit of code in ti_sn_bridge_enable()
> which tells the sink to enable the alternate scrambler.

Sorry - I had misremembered indeed, and looking back I confirmed that
this hunk was not required. I had incorrectly remembered that the second
part was required (below) and assumed that had meant both were.

Of course if we're disabling the scrambling mode, then it likely doesn't
matter what the seed is!.

Looking at the datasheet though, register 0x5a, clearly says the default
is 01 (ASSR) which we're not using. So the datasheet implies we want the
DP scrambler seed (if it were enabled?)

Reading the 0x5a register here shows we have 0x05. Indeed, re-reading
after attempting to write '0' to it still shows 0x05. So it's read-only
and not relevant regardless.

I've removed this hunk now.

> >         /* enable DP PLL */
> >         regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);
> >
> > @@ -1016,6 +1024,11 @@ static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
> >                 goto exit;
> >         }
> >
> > +       /* For DisplayPort, disable scrambling mode. */
> > +       if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> > +               regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG,
> > +                                  SCRAMBLE_DISABLE, SCRAMBLE_DISABLE);
> 
> In my previous review I asked for some comments to include the "why"
> we disabling scrambling mode for DP. Can you please add that?
> 
> I also presume that for DP it's probably a good idea to avoid the code
> in ti_sn_bridge_enable() that tells the sink to use the alternate
> scrambler.

looking at it yes. I've added a check to avoid that in my DP connector
case, and there doesn't seem to be any effect on the output. But I'll
add it to the patch for the next version.



>> I think it was done for DRM purpose, to prevent signals meant for a
>> panel to be connected to a device that could capture video from a DP
>> source.

Is this better:

	/*
	 * Only eDP pannels which support Alternate Scrambler Seed Reset (ASSR)
	 * are supported by the SN65DSI86. For DisplayPort, disable scrambling
	 * mode.
	 */

I don't know if it answers your 'why' ... and I don't think adding
 "We think it is for DRM protection"

really suits the comment.

 
> [1] https://lore.kernel.org/r/CAD=FV=Wwayx1Y-xv=RPuJbG+Q1wHrUWgh4P7wuzy_bAL=_FN0g@mail.gmail.com
> 
> -Doug
Doug Anderson March 9, 2022, 8:55 p.m. UTC | #3
Hi,

On Wed, Mar 9, 2022 at 9:05 AM Kieran Bingham
<kieran.bingham+renesas@ideasonboard.com> wrote:
>
> >> I think it was done for DRM purpose, to prevent signals meant for a
> >> panel to be connected to a device that could capture video from a DP
> >> source.
>
> Is this better:
>
>         /*
>          * Only eDP pannels which support Alternate Scrambler Seed Reset (ASSR)

s/pannels/panels

>          * are supported by the SN65DSI86. For DisplayPort, disable scrambling
>          * mode.
>          */
>
> I don't know if it answers your 'why' ... and I don't think adding
>  "We think it is for DRM protection"
>
> really suits the comment.

Yeah, that looks pretty good. ...or even:

eDP panels use an Alternate Scrambler Seed compared to displays hooked
up via a full DisplayPort connector. SN65DSI86 only supports the
alternate scrambler seed, not the normal one, so the only way we can
support full DisplayPort displays is by fully turning off the
scrambler.


-Doug
Kieran Bingham March 10, 2022, 2:04 p.m. UTC | #4
Quoting Kieran Bingham (2022-03-07 17:59:54)
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> 
> Despite the SN65DSI86 being an eDP bridge, on some systems its output is
> routed to a DisplayPort connector. Enable DisplayPort mode when the next
> component in the display pipeline is detected as a DisplayPort
> connector, and disable eDP features in that case.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Reworked to set bridge type based on the next bridge/connector.
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> --
> Changes since v1/RFC:
>  - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to
>    devm_drm_of_get_bridge"
>  - eDP/DP mode determined from the next bridge connector type.
> 
>  drivers/gpu/drm/bridge/ti-sn65dsi86.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> index 29f5f7123ed9..461f963faa0b 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> @@ -60,6 +60,7 @@
>  #define SN_LN_ASSIGN_REG                       0x59
>  #define  LN_ASSIGN_WIDTH                       2
>  #define SN_ENH_FRAME_REG                       0x5A
> +#define  ASSR_CONTROL                          BIT(0)
>  #define  VSTREAM_ENABLE                                BIT(3)
>  #define  LN_POLRS_OFFSET                       4
>  #define  LN_POLRS_MASK                         0xf0
> @@ -91,6 +92,8 @@
>  #define SN_DATARATE_CONFIG_REG                 0x94
>  #define  DP_DATARATE_MASK                      GENMASK(7, 5)
>  #define  DP_DATARATE(x)                                ((x) << 5)
> +#define SN_TRAINING_SETTING_REG                        0x95
> +#define  SCRAMBLE_DISABLE                      BIT(4)
>  #define SN_ML_TX_MODE_REG                      0x96
>  #define  ML_TX_MAIN_LINK_OFF                   0
>  #define  ML_TX_NORMAL_MODE                     BIT(0)
> @@ -1005,6 +1008,11 @@ static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
>         regmap_update_bits(pdata->regmap, SN_DATARATE_CONFIG_REG,
>                            DP_DATARATE_MASK, DP_DATARATE(dp_rate_idx));
>  
> +       /* For DisplayPort, use the standard DP scrambler seed. */
> +       if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> +               regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG,
> +                                  ASSR_CONTROL, 0);
> +
>         /* enable DP PLL */
>         regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);
>  
> @@ -1016,6 +1024,11 @@ static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
>                 goto exit;
>         }
>  
> +       /* For DisplayPort, disable scrambling mode. */
> +       if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> +               regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG,
> +                                  SCRAMBLE_DISABLE, SCRAMBLE_DISABLE);
> +
>         /*
>          * We'll try to link train several times.  As part of link training
>          * the bridge chip will write DP_SET_POWER_D0 to DP_SET_POWER.  If
> @@ -1260,7 +1273,8 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev,
>         pdata->bridge.funcs = &ti_sn_bridge_funcs;
>         pdata->bridge.of_node = np;
>         pdata->bridge.ops = DRM_BRIDGE_OP_EDID;
> -       pdata->bridge.type = DRM_MODE_CONNECTOR_eDP;
> +       pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort
> +                          ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP;

Anyone know if there's any expectation of other types here? Or is it
just as safe to do:

	pdata->bridge.type = pdata->next_bridge->type;

To achieve the same effect?

--
Kieran


>  
>         drm_bridge_add(&pdata->bridge);
>  
> -- 
> 2.32.0
>
Kieran Bingham March 10, 2022, 2:33 p.m. UTC | #5
Quoting Kieran Bingham (2022-03-10 14:04:09)
> Quoting Kieran Bingham (2022-03-07 17:59:54)
> > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > 
> > Despite the SN65DSI86 being an eDP bridge, on some systems its output is
> > routed to a DisplayPort connector. Enable DisplayPort mode when the next
> > component in the display pipeline is detected as a DisplayPort
> > connector, and disable eDP features in that case.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > Reworked to set bridge type based on the next bridge/connector.
> > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > --
> > Changes since v1/RFC:
> >  - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to
> >    devm_drm_of_get_bridge"
> >  - eDP/DP mode determined from the next bridge connector type.
> > 
> >  drivers/gpu/drm/bridge/ti-sn65dsi86.c | 16 +++++++++++++++-
> >  1 file changed, 15 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > index 29f5f7123ed9..461f963faa0b 100644
> > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > @@ -60,6 +60,7 @@
> >  #define SN_LN_ASSIGN_REG                       0x59
> >  #define  LN_ASSIGN_WIDTH                       2
> >  #define SN_ENH_FRAME_REG                       0x5A
> > +#define  ASSR_CONTROL                          BIT(0)
> >  #define  VSTREAM_ENABLE                                BIT(3)
> >  #define  LN_POLRS_OFFSET                       4
> >  #define  LN_POLRS_MASK                         0xf0
> > @@ -91,6 +92,8 @@
> >  #define SN_DATARATE_CONFIG_REG                 0x94
> >  #define  DP_DATARATE_MASK                      GENMASK(7, 5)
> >  #define  DP_DATARATE(x)                                ((x) << 5)
> > +#define SN_TRAINING_SETTING_REG                        0x95
> > +#define  SCRAMBLE_DISABLE                      BIT(4)
> >  #define SN_ML_TX_MODE_REG                      0x96
> >  #define  ML_TX_MAIN_LINK_OFF                   0
> >  #define  ML_TX_NORMAL_MODE                     BIT(0)
> > @@ -1005,6 +1008,11 @@ static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
> >         regmap_update_bits(pdata->regmap, SN_DATARATE_CONFIG_REG,
> >                            DP_DATARATE_MASK, DP_DATARATE(dp_rate_idx));
> >  
> > +       /* For DisplayPort, use the standard DP scrambler seed. */
> > +       if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> > +               regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG,
> > +                                  ASSR_CONTROL, 0);
> > +
> >         /* enable DP PLL */
> >         regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);
> >  
> > @@ -1016,6 +1024,11 @@ static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
> >                 goto exit;
> >         }
> >  
> > +       /* For DisplayPort, disable scrambling mode. */
> > +       if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> > +               regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG,
> > +                                  SCRAMBLE_DISABLE, SCRAMBLE_DISABLE);
> > +
> >         /*
> >          * We'll try to link train several times.  As part of link training
> >          * the bridge chip will write DP_SET_POWER_D0 to DP_SET_POWER.  If
> > @@ -1260,7 +1273,8 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev,
> >         pdata->bridge.funcs = &ti_sn_bridge_funcs;
> >         pdata->bridge.of_node = np;
> >         pdata->bridge.ops = DRM_BRIDGE_OP_EDID;
> > -       pdata->bridge.type = DRM_MODE_CONNECTOR_eDP;
> > +       pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort
> > +                          ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP;
> 
> Anyone know if there's any expectation of other types here? Or is it
> just as safe to do:
> 
>         pdata->bridge.type = pdata->next_bridge->type;
> 
> To achieve the same effect?

Unfortunately, it would create nicer code - but I don't think it's
exactly right. It leaves the definition of our bridge type to the
connector type of the panel. While the SN65DSI86 can /only/ be either
eDP or DisplayPort.

So I'll keep this conditional on if the next connector is
DRM_MODE_CONNECTOR_DisplayPort.


> 
> --
> Kieran
> 
> 
> >  
> >         drm_bridge_add(&pdata->bridge);
> >  
> > -- 
> > 2.32.0
> >
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 29f5f7123ed9..461f963faa0b 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -60,6 +60,7 @@ 
 #define SN_LN_ASSIGN_REG			0x59
 #define  LN_ASSIGN_WIDTH			2
 #define SN_ENH_FRAME_REG			0x5A
+#define  ASSR_CONTROL				BIT(0)
 #define  VSTREAM_ENABLE				BIT(3)
 #define  LN_POLRS_OFFSET			4
 #define  LN_POLRS_MASK				0xf0
@@ -91,6 +92,8 @@ 
 #define SN_DATARATE_CONFIG_REG			0x94
 #define  DP_DATARATE_MASK			GENMASK(7, 5)
 #define  DP_DATARATE(x)				((x) << 5)
+#define SN_TRAINING_SETTING_REG			0x95
+#define  SCRAMBLE_DISABLE			BIT(4)
 #define SN_ML_TX_MODE_REG			0x96
 #define  ML_TX_MAIN_LINK_OFF			0
 #define  ML_TX_NORMAL_MODE			BIT(0)
@@ -1005,6 +1008,11 @@  static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
 	regmap_update_bits(pdata->regmap, SN_DATARATE_CONFIG_REG,
 			   DP_DATARATE_MASK, DP_DATARATE(dp_rate_idx));
 
+	/* For DisplayPort, use the standard DP scrambler seed. */
+	if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
+		regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG,
+				   ASSR_CONTROL, 0);
+
 	/* enable DP PLL */
 	regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);
 
@@ -1016,6 +1024,11 @@  static int ti_sn_link_training(struct ti_sn65dsi86 *pdata, int dp_rate_idx,
 		goto exit;
 	}
 
+	/* For DisplayPort, disable scrambling mode. */
+	if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
+		regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG,
+				   SCRAMBLE_DISABLE, SCRAMBLE_DISABLE);
+
 	/*
 	 * We'll try to link train several times.  As part of link training
 	 * the bridge chip will write DP_SET_POWER_D0 to DP_SET_POWER.  If
@@ -1260,7 +1273,8 @@  static int ti_sn_bridge_probe(struct auxiliary_device *adev,
 	pdata->bridge.funcs = &ti_sn_bridge_funcs;
 	pdata->bridge.of_node = np;
 	pdata->bridge.ops = DRM_BRIDGE_OP_EDID;
-	pdata->bridge.type = DRM_MODE_CONNECTOR_eDP;
+	pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort
+			   ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP;
 
 	drm_bridge_add(&pdata->bridge);