diff mbox series

[v1,2/3] arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi

Message ID 20220519084119.675990-3-judyhsiao@chromium.org (mailing list archive)
State Changes Requested
Headers show
Series Add dtsi for sc7280 boards that using rt5682 codec | expand

Commit Message

Judy Hsiao May 19, 2022, 8:41 a.m. UTC
Audio dtsi for sc7280 boards that using rt5682 headset codec:
1. Add dt nodes for sound card which use I2S playback and record
   through rt5682s and I2S playback through max98357a.
2. Enable lpass cpu node and add pin control and dai-links.

Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
 .../qcom/sc7280-herobrine-audio-rt5682.dtsi   | 121 ++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi

Comments

Matthias Kaehlcke May 19, 2022, 4:04 p.m. UTC | #1
On Thu, May 19, 2022 at 08:41:18AM +0000, Judy Hsiao wrote:
> Audio dtsi for sc7280 boards that using rt5682 headset codec:
> 1. Add dt nodes for sound card which use I2S playback and record
>    through rt5682s and I2S playback through max98357a.
> 2. Enable lpass cpu node and add pin control and dai-links.
> 
> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>

A general note: this series depends on others like "Add lpass pin
control support for audio on sc7280 based targets" [1] and "Add
soundcard support for sc7280 based platforms" [2]. This should be
mentioned somewhere, either in the cover letter or after '---'.

[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638274

> ---
>  .../qcom/sc7280-herobrine-audio-rt5682.dtsi   | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
> new file mode 100644
> index 000000000000..9e449817f6fd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + *
> + * This file defines the common audio settings for the child boards using rt5682 codec.
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +/ {
> +	/* BOARD-SPECIFIC TOP LEVEL NODES */
> +	sound: sound {
> +		compatible = "google,sc7280-herobrine";
> +		model = "sc7280-rt5682-max98360a-1mic";
> +
> +		status = "okay";
> +		audio-routing =
> +			"Headphone Jack", "HPOL",
> +			"Headphone Jack", "HPOR";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		#sound-dai-cells = <0>;

Is 'sound-dai-cells' really needed here? The binding doesn't mention it and
the sound card isn't really a DAI.

> +
> +		dai-link@0 {
> +			link-name = "MAX98360";
> +			reg = <0>;

Eventually the 'reg' property should be removed from the binding and DTs
([1], [2]), but for now it is needed to match the binding.

[1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1649863277-31615-5-git-send-email-quic_srivasam@quicinc.com/
[2] https://patchwork.kernel.org/project/linux-arm-msm/patch/1650291252-30398-5-git-send-email-quic_srivasam@quicinc.com/


> +
> +			cpu {
> +				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
> +			};
> +
> +			codec {
> +				sound-dai = <&max98360a>;
> +			};
> +		};
> +
> +		dai-link@1 {
> +			link-name = "ALC5682";
> +			reg = <1>;
> +
> +			cpu {
> +				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
> +			};
> +
> +			codec {
> +				sound-dai = <&alc5682 0 /* aif1 */>;
> +			};
> +		};
> +	};
> +};
> +
> +hp_i2c: &i2c2 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	alc5682: codec@1a {
> +		compatible = "realtek,rt5682s";
> +		reg = <0x1a>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hp_irq>;
> +
> +		#sound-dai-cells = <1>;
> +
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
> +
> +		AVDD-supply = <&pp1800_alc5682>;
> +		MICVDD-supply = <&pp3300_codec>;

The regulators are not mentioned in the binding, but the driver
expects them, so I guess this is fine (maybe the binding should
be updated in a separate patch?).
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
new file mode 100644
index 000000000000..9e449817f6fd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
@@ -0,0 +1,121 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards using rt5682 codec.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-1mic";
+
+		status = "okay";
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "ALC5682";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0 &mi2s0_data1 &mi2s0_mclk &mi2s0_sclk &mi2s0_ws
+		     &mi2s1_data0 &mi2s1_sclk &mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+};
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+};