diff mbox series

[32/34] iio: adc: stm32-adc: convert to device properties

Message ID 20220610084545.547700-33-nuno.sa@analog.com (mailing list archive)
State Changes Requested
Headers show
Series make iio inkern interface firmware agnostic | expand

Commit Message

Nuno Sa June 10, 2022, 8:45 a.m. UTC
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
---
 drivers/iio/adc/stm32-adc.c | 128 ++++++++++++++++++++----------------
 1 file changed, 70 insertions(+), 58 deletions(-)

Comments

Jonathan Cameron June 11, 2022, 3:47 p.m. UTC | #1
On Fri, 10 Jun 2022 10:45:43 +0200
Nuno Sá <nuno.sa@analog.com> wrote:

> Make the conversion to firmware agnostic device properties. As part of
> the conversion the IIO inkern interface 'of_xlate()' is also converted to
> 'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
> dependencies from IIO.
> 
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>

One trivial comment inline. 

In general this particular refactor is complex, so I either want
eyes of those familiar with the driver and / or testing or we may want
to reduce the scope to just the fwnode_xlate() and leave the more
complex conversions for when we can get that testing done.

Let's see if we get the necessary review on this more complex patch.
I just don't want us to get stalled by trying to do too much at once!

Jonathan


> ---
>  drivers/iio/adc/stm32-adc.c | 128 ++++++++++++++++++++----------------
>  1 file changed, 70 insertions(+), 58 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index a68ecbda6480..87acef31ace1 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -21,11 +21,11 @@
>  #include <linux/io.h>
>  #include <linux/iopoll.h>
>  #include <linux/module.h>
> +#include <linux/mod_devicetable.h>
>  #include <linux/nvmem-consumer.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> -#include <linux/of.h>
> -#include <linux/of_device.h>
> +#include <linux/property.h>
>  
>  #include "stm32-adc-core.h"
>  
> @@ -1524,8 +1524,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
>  	return ret;
>  }
>  
> -static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
> -			      const struct of_phandle_args *iiospec)
> +static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev,
> +				  const struct fwnode_reference_args *iiospec)
>  {
>  	int i;
>  
> @@ -1579,7 +1579,7 @@ static const struct iio_info stm32_adc_iio_info = {
>  	.hwfifo_set_watermark = stm32_adc_set_watermark,
>  	.update_scan_mode = stm32_adc_update_scan_mode,
>  	.debugfs_reg_access = stm32_adc_debugfs_reg_access,
> -	.of_xlate = stm32_adc_of_xlate,
> +	.fwnode_xlate = stm32_adc_fwnode_xlate,
>  };
>  
>  static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
> @@ -1776,14 +1776,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
>  	{},
>  };
>  
> -static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
> +static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
> +	struct device *dev = &indio_dev->dev;
>  	struct stm32_adc *adc = iio_priv(indio_dev);
>  	unsigned int i;
>  	u32 res;
>  
> -	if (of_property_read_u32(node, "assigned-resolution-bits", &res))
> +	if (device_property_read_u32(dev, "assigned-resolution-bits", &res))
>  		res = adc->cfg->adc_info->resolutions[0];
>  
>  	for (i = 0; i < adc->cfg->adc_info->num_res; i++)
> @@ -1867,11 +1867,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
>  
>  static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
> +	struct device *dev = &indio_dev->dev;
>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>  	int num_channels = 0, ret;
>  
> -	ret = of_property_count_u32_elems(node, "st,adc-channels");
> +	ret = device_property_count_u32(dev, "st,adc-channels");
>  	if (ret > adc_info->max_channels) {
>  		dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
>  		return -EINVAL;
> @@ -1879,18 +1879,17 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
>  		num_channels += ret;
>  	}
>  
> -	ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
> -					      sizeof(struct stm32_adc_diff_channel));
> -	if (ret > adc_info->max_channels) {
> +	ret = device_property_count_u32(dev, "st,adc-diff-channels");
> +	if ((ret / 2) > adc_info->max_channels) {
hmm. The magic '2' that is introduced here kind of looses some of the meaning
that existed for the *_count_elems_of_size()

Perhaps introduce a define or a comment on why it is 2?

>  		dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
>  		return -EINVAL;
> -	} else if (ret > 0) {
> -		adc->num_diff = ret;
> -		num_channels += ret;
> +	} else if ((ret / 2) > 0) {
> +		adc->num_diff = ret / 2;
> +		num_channels += ret / 2;
>  	}
>  
>  	/* Optional sample time is provided either for each, or all channels */
> -	ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
> +	ret = device_property_count_u32(dev, "st,min-sample-time-nsecs");
>  	if (ret > 1 && ret != num_channels) {
>  		dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
>  		return -EINVAL;
> @@ -1901,21 +1900,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
>  
>  static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
>  				      struct stm32_adc *adc,
> -				      struct iio_chan_spec *channels)
> +				      struct iio_chan_spec *channels,
> +				      int nchans)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>  	struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
> +	struct device *dev = &indio_dev->dev;
>  	u32 num_diff = adc->num_diff;
>  	int size = num_diff * sizeof(*diff) / sizeof(u32);
> -	int scan_index = 0, val, ret, i;
> -	struct property *prop;
> -	const __be32 *cur;
> -	u32 smp = 0;
> +	int scan_index = 0, ret, i;
> +	u32 smp = 0, nsmps, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];
>  
>  	if (num_diff) {
> -		ret = of_property_read_u32_array(node, "st,adc-diff-channels",
> -						 (u32 *)diff, size);
> +		ret = device_property_read_u32_array(dev, "st,adc-diff-channels",
> +						     (u32 *)diff, size);
>  		if (ret) {
>  			dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret);
>  			return ret;
> @@ -1936,32 +1934,51 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
>  		}
>  	}
>  
> -	of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
> -		if (val >= adc_info->max_channels) {
> -			dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
> +	ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
> +					     nchans);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < nchans; i++) {
> +		if (chans[i] >= adc_info->max_channels) {
> +			dev_err(&indio_dev->dev, "Invalid channel %d\n",
> +				chans[i]);
>  			return -EINVAL;
>  		}
>  
>  		/* Channel can't be configured both as single-ended & diff */
>  		for (i = 0; i < num_diff; i++) {
> -			if (val == diff[i].vinp) {
> -				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	val);
> +			if (chans[i] == diff[i].vinp) {
> +				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	chans[i]);
>  				return -EINVAL;
>  			}
>  		}
> -		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
> -					0, scan_index, false);
> +		stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
> +					chans[i], 0, scan_index, false);
>  		scan_index++;
>  	}
>  
> +	nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs");
> +	if (nsmps) {
> +		if (nsmps >= nchans)
> +			nsmps = nchans;
> +
> +		ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs",
> +						     smps, nsmps);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	for (i = 0; i < scan_index; i++) {
>  		/*
> -		 * Using of_property_read_u32_index(), smp value will only be
> -		 * modified if valid u32 value can be decoded. This allows to
> -		 * get either no value, 1 shared value for all indexes, or one
> -		 * value per channel.
> +		 * This check is used with the above logic so that smp value
> +		 * will only be modified if valid u32 value can be decoded. This
> +		 * allows to get either no value, 1 shared value for all indexes,
> +		 * or one value per channel. The point is to have the same
> +		 * behavior as 'of_property_read_u32_index()'.
>  		 */
> -		of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
> +		if (i < nsmps)
> +			smp = smps[i];
>  
>  		/* Prepare sampling time settings */
>  		stm32_adc_smpr_init(adc, channels[i].channel, smp);
> @@ -2004,22 +2021,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>  				       struct stm32_adc *adc,
>  				       struct iio_chan_spec *channels)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
> -	struct device_node *child;
> +	struct fwnode_handle *child;
>  	const char *name;
>  	int val, scan_index = 0, ret;
>  	bool differential;
>  	u32 vin[2];
>  
> -	for_each_available_child_of_node(node, child) {
> -		ret = of_property_read_u32(child, "reg", &val);
> +	device_for_each_child_node(&indio_dev->dev, child) {
> +		ret = fwnode_property_read_u32(child, "reg", &val);
>  		if (ret) {
>  			dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
>  			goto err;
>  		}
>  
> -		ret = of_property_read_string(child, "label", &name);
> +		ret = fwnode_property_read_string(child, "label", &name);
>  		/* label is optional */
>  		if (!ret) {
>  			if (strlen(name) >= STM32_ADC_CH_SZ) {
> @@ -2044,7 +2060,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>  		}
>  
>  		differential = false;
> -		ret = of_property_read_u32_array(child, "diff-channels", vin, 2);
> +		ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
>  		/* diff-channels is optional */
>  		if (!ret) {
>  			differential = true;
> @@ -2061,7 +2077,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>  		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
>  					vin[1], scan_index, differential);
>  
> -		ret = of_property_read_u32(child, "st,min-sample-time-ns", &val);
> +		ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
>  		/* st,min-sample-time-ns is optional */
>  		if (!ret) {
>  			stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
> @@ -2079,14 +2095,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>  	return scan_index;
>  
>  err:
> -	of_node_put(child);
> +	fwnode_handle_put(child);
>  
>  	return ret;
>  }
>  
> -static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
> +static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
>  	struct stm32_adc *adc = iio_priv(indio_dev);
>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>  	struct iio_chan_spec *channels;
> @@ -2096,7 +2111,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
>  	for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
>  		adc->int_ch[i] = STM32_ADC_INT_CH_NONE;
>  
> -	num_channels = of_get_available_child_count(node);
> +	num_channels = device_get_child_node_count(&indio_dev->dev);
>  	/* If no channels have been found, fallback to channels legacy properties. */
>  	if (!num_channels) {
>  		legacy = true;
> @@ -2127,7 +2142,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
>  		return -ENOMEM;
>  
>  	if (legacy)
> -		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels);
> +		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
> +						 num_channels);
>  	else
>  		ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
>  	if (ret < 0)
> @@ -2209,9 +2225,6 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  	bool timestamping = false;
>  	int ret;
>  
> -	if (!pdev->dev.of_node)
> -		return -ENODEV;
> -
>  	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
>  	if (!indio_dev)
>  		return -ENOMEM;
> @@ -2220,17 +2233,16 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  	adc->common = dev_get_drvdata(pdev->dev.parent);
>  	spin_lock_init(&adc->lock);
>  	init_completion(&adc->completion);
> -	adc->cfg = (const struct stm32_adc_cfg *)
> -		of_match_device(dev->driver->of_match_table, dev)->data;
> +	adc->cfg = device_get_match_data(dev);
>  
>  	indio_dev->name = dev_name(&pdev->dev);
> -	indio_dev->dev.of_node = pdev->dev.of_node;
> +	device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev));
>  	indio_dev->info = &stm32_adc_iio_info;
>  	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
>  
>  	platform_set_drvdata(pdev, indio_dev);
>  
> -	ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
> +	ret = device_property_read_u32(dev, "reg", &adc->offset);
>  	if (ret != 0) {
>  		dev_err(&pdev->dev, "missing reg property\n");
>  		return -EINVAL;
> @@ -2259,7 +2271,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	ret = stm32_adc_of_get_resolution(indio_dev);
> +	ret = stm32_adc_fw_get_resolution(indio_dev);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -2276,7 +2288,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  		timestamping = true;
>  	}
>  
> -	ret = stm32_adc_chan_of_init(indio_dev, timestamping);
> +	ret = stm32_adc_chan_fw_init(indio_dev, timestamping);
>  	if (ret < 0)
>  		goto err_dma_disable;
>
Fabrice Gasnier June 17, 2022, 3:58 p.m. UTC | #2
On 6/11/22 17:47, Jonathan Cameron wrote:
> On Fri, 10 Jun 2022 10:45:43 +0200
> Nuno Sá <nuno.sa@analog.com> wrote:
> 
>> Make the conversion to firmware agnostic device properties. As part of
>> the conversion the IIO inkern interface 'of_xlate()' is also converted to
>> 'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
>> dependencies from IIO.
>>
>> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> 
> One trivial comment inline. 
> 
> In general this particular refactor is complex, so I either want
> eyes of those familiar with the driver and / or testing or we may want
> to reduce the scope to just the fwnode_xlate() and leave the more
> complex conversions for when we can get that testing done.
> 
> Let's see if we get the necessary review on this more complex patch.
> I just don't want us to get stalled by trying to do too much at once!
> 
> Jonathan
> 
> 
>> ---
>>  drivers/iio/adc/stm32-adc.c | 128 ++++++++++++++++++++----------------
>>  1 file changed, 70 insertions(+), 58 deletions(-)
>>
>> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
>> index a68ecbda6480..87acef31ace1 100644
>> --- a/drivers/iio/adc/stm32-adc.c
>> +++ b/drivers/iio/adc/stm32-adc.c
>> @@ -21,11 +21,11 @@
>>  #include <linux/io.h>
>>  #include <linux/iopoll.h>
>>  #include <linux/module.h>
>> +#include <linux/mod_devicetable.h>
>>  #include <linux/nvmem-consumer.h>
>>  #include <linux/platform_device.h>
>>  #include <linux/pm_runtime.h>
>> -#include <linux/of.h>
>> -#include <linux/of_device.h>
>> +#include <linux/property.h>
>>  
>>  #include "stm32-adc-core.h"
>>  
>> @@ -1524,8 +1524,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
>>  	return ret;
>>  }
>>  
>> -static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
>> -			      const struct of_phandle_args *iiospec)
>> +static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev,
>> +				  const struct fwnode_reference_args *iiospec)
>>  {
>>  	int i;
>>  
>> @@ -1579,7 +1579,7 @@ static const struct iio_info stm32_adc_iio_info = {
>>  	.hwfifo_set_watermark = stm32_adc_set_watermark,
>>  	.update_scan_mode = stm32_adc_update_scan_mode,
>>  	.debugfs_reg_access = stm32_adc_debugfs_reg_access,
>> -	.of_xlate = stm32_adc_of_xlate,
>> +	.fwnode_xlate = stm32_adc_fwnode_xlate,
>>  };
>>  
>>  static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
>> @@ -1776,14 +1776,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
>>  	{},
>>  };
>>  
>> -static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
>> +static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
>>  {
>> -	struct device_node *node = indio_dev->dev.of_node;
>> +	struct device *dev = &indio_dev->dev;
>>  	struct stm32_adc *adc = iio_priv(indio_dev);
>>  	unsigned int i;
>>  	u32 res;
>>  
>> -	if (of_property_read_u32(node, "assigned-resolution-bits", &res))
>> +	if (device_property_read_u32(dev, "assigned-resolution-bits", &res))
>>  		res = adc->cfg->adc_info->resolutions[0];
>>  
>>  	for (i = 0; i < adc->cfg->adc_info->num_res; i++)
>> @@ -1867,11 +1867,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
>>  
>>  static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc)
>>  {
>> -	struct device_node *node = indio_dev->dev.of_node;
>> +	struct device *dev = &indio_dev->dev;
>>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>>  	int num_channels = 0, ret;
>>  
>> -	ret = of_property_count_u32_elems(node, "st,adc-channels");
>> +	ret = device_property_count_u32(dev, "st,adc-channels");
>>  	if (ret > adc_info->max_channels) {
>>  		dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
>>  		return -EINVAL;
>> @@ -1879,18 +1879,17 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
>>  		num_channels += ret;
>>  	}
>>  
>> -	ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
>> -					      sizeof(struct stm32_adc_diff_channel));
>> -	if (ret > adc_info->max_channels) {
>> +	ret = device_property_count_u32(dev, "st,adc-diff-channels");
>> +	if ((ret / 2) > adc_info->max_channels) {
> hmm. The magic '2' that is introduced here kind of looses some of the meaning
> that existed for the *_count_elems_of_size()
> 
> Perhaps introduce a define or a comment on why it is 2?

Hi Nuno,

Thanks for your patch, please find some remarks below.

First, I agree with Jonathan here. (Just suggesting) Would it be
possible to keep a reference to the target struct to ease long term
maintenance ? I'm thinking of:
sizeof(struct stm32_adc_diff_channel) / sizeof(u32).
Or possibly a better approach...

> 
>>  		dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
>>  		return -EINVAL;
>> -	} else if (ret > 0) {
>> -		adc->num_diff = ret;
>> -		num_channels += ret;
>> +	} else if ((ret / 2) > 0) {
>> +		adc->num_diff = ret / 2;
>> +		num_channels += ret / 2;
>>  	}
>>  
>>  	/* Optional sample time is provided either for each, or all channels */
>> -	ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
>> +	ret = device_property_count_u32(dev, "st,min-sample-time-nsecs");
>>  	if (ret > 1 && ret != num_channels) {
>>  		dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
>>  		return -EINVAL;
>> @@ -1901,21 +1900,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
>>  
>>  static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
>>  				      struct stm32_adc *adc,
>> -				      struct iio_chan_spec *channels)
>> +				      struct iio_chan_spec *channels,
>> +				      int nchans)
>>  {
>> -	struct device_node *node = indio_dev->dev.of_node;
>>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>>  	struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
>> +	struct device *dev = &indio_dev->dev;
>>  	u32 num_diff = adc->num_diff;
>>  	int size = num_diff * sizeof(*diff) / sizeof(u32);
>> -	int scan_index = 0, val, ret, i;
>> -	struct property *prop;
>> -	const __be32 *cur;
>> -	u32 smp = 0;
>> +	int scan_index = 0, ret, i;
>> +	u32 smp = 0, nsmps, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];
>>  
>>  	if (num_diff) {
>> -		ret = of_property_read_u32_array(node, "st,adc-diff-channels",
>> -						 (u32 *)diff, size);
>> +		ret = device_property_read_u32_array(dev, "st,adc-diff-channels",
>> +						     (u32 *)diff, size);
>>  		if (ret) {
>>  			dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret);
>>  			return ret;
>> @@ -1936,32 +1934,51 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
>>  		}
>>  	}
>>  
>> -	of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
>> -		if (val >= adc_info->max_channels) {
>> -			dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
>> +	ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
>> +					     nchans);
>> +	if (ret)
>> +		return ret;
>> +
>> +	for (i = 0; i < nchans; i++) {

Shouldn't use 'i' variable as is.

I tested at my end. There's a bug around here, as the same variable 'i'
is used already in next for loop. It creates an endless loop, that ends
up in incrementing scan_index indefinitely until some oops occurs.

I fixed that locally for quick testing by using another variable.

Isn't there a helper to achive this (e.g. like of_property_for_each_u32) ?

>> +		if (chans[i] >= adc_info->max_channels) {
>> +			dev_err(&indio_dev->dev, "Invalid channel %d\n",
>> +				chans[i]);
>>  			return -EINVAL;
>>  		}
>>  
>>  		/* Channel can't be configured both as single-ended & diff */
>>  		for (i = 0; i < num_diff; i++) {
>> -			if (val == diff[i].vinp) {
>> -				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	val);
>> +			if (chans[i] == diff[i].vinp) {
>> +				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	chans[i]);
>>  				return -EINVAL;
>>  			}
>>  		}
>> -		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
>> -					0, scan_index, false);
>> +		stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
>> +					chans[i], 0, scan_index, false);
>>  		scan_index++;
>>  	}
>>  
>> +	nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs");
>> +	if (nsmps) {
>> +		if (nsmps >= nchans)

nit: if (nsmps > nchans)

>> +			nsmps = nchans;

There's a bit of redundancy in checking nsmps,
"st,min-sample-time-nsecs" is already sanitized in
stm32_adc_get_legacy_chan_count():

/* Optional sample time is provided either for each, or all channels */
ret = device_property_count_u32(dev, "st,min-sample-time-nsecs");
if (ret > 1 && ret != num_channels) {
	dev_err(...

So just sharing my thoughts here:
- Maybe this could be dropped ?
  (Thinking loudly) The earliest this gets sanitized, the less un-needed
initialisations happen before failing?
- Or the earlier check could be moved here ?

I've no strong opinion.

>> +
>> +		ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs",
>> +						     smps, nsmps);
>> +		if (ret)
>> +			return ret;
>> +	}
>> +
>>  	for (i = 0; i < scan_index; i++) {
>>  		/*
>> -		 * Using of_property_read_u32_index(), smp value will only be
>> -		 * modified if valid u32 value can be decoded. This allows to
>> -		 * get either no value, 1 shared value for all indexes, or one
>> -		 * value per channel.
>> +		 * This check is used with the above logic so that smp value
>> +		 * will only be modified if valid u32 value can be decoded. This
>> +		 * allows to get either no value, 1 shared value for all indexes,
>> +		 * or one value per channel. The point is to have the same
>> +		 * behavior as 'of_property_read_u32_index()'.
>>  		 */
>> -		of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
>> +		if (i < nsmps)
>> +			smp = smps[i];

Minor remark, I'm wondering if using a switch (nsmps) {.. case} or
similar would help to improve understandabilty / readability ?

Best Regards,
Fabrice

>>  
>>  		/* Prepare sampling time settings */
>>  		stm32_adc_smpr_init(adc, channels[i].channel, smp);
>> @@ -2004,22 +2021,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>>  				       struct stm32_adc *adc,
>>  				       struct iio_chan_spec *channels)
>>  {
>> -	struct device_node *node = indio_dev->dev.of_node;
>>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>> -	struct device_node *child;
>> +	struct fwnode_handle *child;
>>  	const char *name;
>>  	int val, scan_index = 0, ret;
>>  	bool differential;
>>  	u32 vin[2];
>>  
>> -	for_each_available_child_of_node(node, child) {
>> -		ret = of_property_read_u32(child, "reg", &val);
>> +	device_for_each_child_node(&indio_dev->dev, child) {
>> +		ret = fwnode_property_read_u32(child, "reg", &val);
>>  		if (ret) {
>>  			dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
>>  			goto err;
>>  		}
>>  
>> -		ret = of_property_read_string(child, "label", &name);
>> +		ret = fwnode_property_read_string(child, "label", &name);
>>  		/* label is optional */
>>  		if (!ret) {
>>  			if (strlen(name) >= STM32_ADC_CH_SZ) {
>> @@ -2044,7 +2060,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>>  		}
>>  
>>  		differential = false;
>> -		ret = of_property_read_u32_array(child, "diff-channels", vin, 2);
>> +		ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
>>  		/* diff-channels is optional */
>>  		if (!ret) {
>>  			differential = true;
>> @@ -2061,7 +2077,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>>  		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
>>  					vin[1], scan_index, differential);
>>  
>> -		ret = of_property_read_u32(child, "st,min-sample-time-ns", &val);
>> +		ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
>>  		/* st,min-sample-time-ns is optional */
>>  		if (!ret) {
>>  			stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
>> @@ -2079,14 +2095,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>>  	return scan_index;
>>  
>>  err:
>> -	of_node_put(child);
>> +	fwnode_handle_put(child);
>>  
>>  	return ret;
>>  }
>>  
>> -static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
>> +static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
>>  {
>> -	struct device_node *node = indio_dev->dev.of_node;
>>  	struct stm32_adc *adc = iio_priv(indio_dev);
>>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>>  	struct iio_chan_spec *channels;
>> @@ -2096,7 +2111,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
>>  	for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
>>  		adc->int_ch[i] = STM32_ADC_INT_CH_NONE;
>>  
>> -	num_channels = of_get_available_child_count(node);
>> +	num_channels = device_get_child_node_count(&indio_dev->dev);
>>  	/* If no channels have been found, fallback to channels legacy properties. */
>>  	if (!num_channels) {
>>  		legacy = true;
>> @@ -2127,7 +2142,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
>>  		return -ENOMEM;
>>  
>>  	if (legacy)
>> -		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels);
>> +		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
>> +						 num_channels);
>>  	else
>>  		ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
>>  	if (ret < 0)
>> @@ -2209,9 +2225,6 @@ static int stm32_adc_probe(struct platform_device *pdev)
>>  	bool timestamping = false;
>>  	int ret;
>>  
>> -	if (!pdev->dev.of_node)
>> -		return -ENODEV;
>> -
>>  	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
>>  	if (!indio_dev)
>>  		return -ENOMEM;
>> @@ -2220,17 +2233,16 @@ static int stm32_adc_probe(struct platform_device *pdev)
>>  	adc->common = dev_get_drvdata(pdev->dev.parent);
>>  	spin_lock_init(&adc->lock);
>>  	init_completion(&adc->completion);
>> -	adc->cfg = (const struct stm32_adc_cfg *)
>> -		of_match_device(dev->driver->of_match_table, dev)->data;
>> +	adc->cfg = device_get_match_data(dev);
>>  
>>  	indio_dev->name = dev_name(&pdev->dev);
>> -	indio_dev->dev.of_node = pdev->dev.of_node;
>> +	device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev));
>>  	indio_dev->info = &stm32_adc_iio_info;
>>  	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
>>  
>>  	platform_set_drvdata(pdev, indio_dev);
>>  
>> -	ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
>> +	ret = device_property_read_u32(dev, "reg", &adc->offset);
>>  	if (ret != 0) {
>>  		dev_err(&pdev->dev, "missing reg property\n");
>>  		return -EINVAL;
>> @@ -2259,7 +2271,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
>>  		}
>>  	}
>>  
>> -	ret = stm32_adc_of_get_resolution(indio_dev);
>> +	ret = stm32_adc_fw_get_resolution(indio_dev);
>>  	if (ret < 0)
>>  		return ret;
>>  
>> @@ -2276,7 +2288,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
>>  		timestamping = true;
>>  	}
>>  
>> -	ret = stm32_adc_chan_of_init(indio_dev, timestamping);
>> +	ret = stm32_adc_chan_fw_init(indio_dev, timestamping);
>>  	if (ret < 0)
>>  		goto err_dma_disable;
>>  
>
diff mbox series

Patch

diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index a68ecbda6480..87acef31ace1 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -21,11 +21,11 @@ 
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/property.h>
 
 #include "stm32-adc-core.h"
 
@@ -1524,8 +1524,8 @@  static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
-			      const struct of_phandle_args *iiospec)
+static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev,
+				  const struct fwnode_reference_args *iiospec)
 {
 	int i;
 
@@ -1579,7 +1579,7 @@  static const struct iio_info stm32_adc_iio_info = {
 	.hwfifo_set_watermark = stm32_adc_set_watermark,
 	.update_scan_mode = stm32_adc_update_scan_mode,
 	.debugfs_reg_access = stm32_adc_debugfs_reg_access,
-	.of_xlate = stm32_adc_of_xlate,
+	.fwnode_xlate = stm32_adc_fwnode_xlate,
 };
 
 static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
@@ -1776,14 +1776,14 @@  static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
 	{},
 };
 
-static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
+static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
 {
-	struct device_node *node = indio_dev->dev.of_node;
+	struct device *dev = &indio_dev->dev;
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	unsigned int i;
 	u32 res;
 
-	if (of_property_read_u32(node, "assigned-resolution-bits", &res))
+	if (device_property_read_u32(dev, "assigned-resolution-bits", &res))
 		res = adc->cfg->adc_info->resolutions[0];
 
 	for (i = 0; i < adc->cfg->adc_info->num_res; i++)
@@ -1867,11 +1867,11 @@  static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
 
 static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc)
 {
-	struct device_node *node = indio_dev->dev.of_node;
+	struct device *dev = &indio_dev->dev;
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
 	int num_channels = 0, ret;
 
-	ret = of_property_count_u32_elems(node, "st,adc-channels");
+	ret = device_property_count_u32(dev, "st,adc-channels");
 	if (ret > adc_info->max_channels) {
 		dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
 		return -EINVAL;
@@ -1879,18 +1879,17 @@  static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
 		num_channels += ret;
 	}
 
-	ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
-					      sizeof(struct stm32_adc_diff_channel));
-	if (ret > adc_info->max_channels) {
+	ret = device_property_count_u32(dev, "st,adc-diff-channels");
+	if ((ret / 2) > adc_info->max_channels) {
 		dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
 		return -EINVAL;
-	} else if (ret > 0) {
-		adc->num_diff = ret;
-		num_channels += ret;
+	} else if ((ret / 2) > 0) {
+		adc->num_diff = ret / 2;
+		num_channels += ret / 2;
 	}
 
 	/* Optional sample time is provided either for each, or all channels */
-	ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
+	ret = device_property_count_u32(dev, "st,min-sample-time-nsecs");
 	if (ret > 1 && ret != num_channels) {
 		dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
 		return -EINVAL;
@@ -1901,21 +1900,20 @@  static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
 
 static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
 				      struct stm32_adc *adc,
-				      struct iio_chan_spec *channels)
+				      struct iio_chan_spec *channels,
+				      int nchans)
 {
-	struct device_node *node = indio_dev->dev.of_node;
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
 	struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
+	struct device *dev = &indio_dev->dev;
 	u32 num_diff = adc->num_diff;
 	int size = num_diff * sizeof(*diff) / sizeof(u32);
-	int scan_index = 0, val, ret, i;
-	struct property *prop;
-	const __be32 *cur;
-	u32 smp = 0;
+	int scan_index = 0, ret, i;
+	u32 smp = 0, nsmps, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];
 
 	if (num_diff) {
-		ret = of_property_read_u32_array(node, "st,adc-diff-channels",
-						 (u32 *)diff, size);
+		ret = device_property_read_u32_array(dev, "st,adc-diff-channels",
+						     (u32 *)diff, size);
 		if (ret) {
 			dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret);
 			return ret;
@@ -1936,32 +1934,51 @@  static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
 		}
 	}
 
-	of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
-		if (val >= adc_info->max_channels) {
-			dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
+	ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
+					     nchans);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nchans; i++) {
+		if (chans[i] >= adc_info->max_channels) {
+			dev_err(&indio_dev->dev, "Invalid channel %d\n",
+				chans[i]);
 			return -EINVAL;
 		}
 
 		/* Channel can't be configured both as single-ended & diff */
 		for (i = 0; i < num_diff; i++) {
-			if (val == diff[i].vinp) {
-				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	val);
+			if (chans[i] == diff[i].vinp) {
+				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	chans[i]);
 				return -EINVAL;
 			}
 		}
-		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
-					0, scan_index, false);
+		stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
+					chans[i], 0, scan_index, false);
 		scan_index++;
 	}
 
+	nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs");
+	if (nsmps) {
+		if (nsmps >= nchans)
+			nsmps = nchans;
+
+		ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs",
+						     smps, nsmps);
+		if (ret)
+			return ret;
+	}
+
 	for (i = 0; i < scan_index; i++) {
 		/*
-		 * Using of_property_read_u32_index(), smp value will only be
-		 * modified if valid u32 value can be decoded. This allows to
-		 * get either no value, 1 shared value for all indexes, or one
-		 * value per channel.
+		 * This check is used with the above logic so that smp value
+		 * will only be modified if valid u32 value can be decoded. This
+		 * allows to get either no value, 1 shared value for all indexes,
+		 * or one value per channel. The point is to have the same
+		 * behavior as 'of_property_read_u32_index()'.
 		 */
-		of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
+		if (i < nsmps)
+			smp = smps[i];
 
 		/* Prepare sampling time settings */
 		stm32_adc_smpr_init(adc, channels[i].channel, smp);
@@ -2004,22 +2021,21 @@  static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 				       struct stm32_adc *adc,
 				       struct iio_chan_spec *channels)
 {
-	struct device_node *node = indio_dev->dev.of_node;
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
-	struct device_node *child;
+	struct fwnode_handle *child;
 	const char *name;
 	int val, scan_index = 0, ret;
 	bool differential;
 	u32 vin[2];
 
-	for_each_available_child_of_node(node, child) {
-		ret = of_property_read_u32(child, "reg", &val);
+	device_for_each_child_node(&indio_dev->dev, child) {
+		ret = fwnode_property_read_u32(child, "reg", &val);
 		if (ret) {
 			dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
 			goto err;
 		}
 
-		ret = of_property_read_string(child, "label", &name);
+		ret = fwnode_property_read_string(child, "label", &name);
 		/* label is optional */
 		if (!ret) {
 			if (strlen(name) >= STM32_ADC_CH_SZ) {
@@ -2044,7 +2060,7 @@  static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 		}
 
 		differential = false;
-		ret = of_property_read_u32_array(child, "diff-channels", vin, 2);
+		ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
 		/* diff-channels is optional */
 		if (!ret) {
 			differential = true;
@@ -2061,7 +2077,7 @@  static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
 					vin[1], scan_index, differential);
 
-		ret = of_property_read_u32(child, "st,min-sample-time-ns", &val);
+		ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
 		/* st,min-sample-time-ns is optional */
 		if (!ret) {
 			stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
@@ -2079,14 +2095,13 @@  static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 	return scan_index;
 
 err:
-	of_node_put(child);
+	fwnode_handle_put(child);
 
 	return ret;
 }
 
-static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
+static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
 {
-	struct device_node *node = indio_dev->dev.of_node;
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
 	struct iio_chan_spec *channels;
@@ -2096,7 +2111,7 @@  static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
 	for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
 		adc->int_ch[i] = STM32_ADC_INT_CH_NONE;
 
-	num_channels = of_get_available_child_count(node);
+	num_channels = device_get_child_node_count(&indio_dev->dev);
 	/* If no channels have been found, fallback to channels legacy properties. */
 	if (!num_channels) {
 		legacy = true;
@@ -2127,7 +2142,8 @@  static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
 		return -ENOMEM;
 
 	if (legacy)
-		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels);
+		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
+						 num_channels);
 	else
 		ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
 	if (ret < 0)
@@ -2209,9 +2225,6 @@  static int stm32_adc_probe(struct platform_device *pdev)
 	bool timestamping = false;
 	int ret;
 
-	if (!pdev->dev.of_node)
-		return -ENODEV;
-
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -2220,17 +2233,16 @@  static int stm32_adc_probe(struct platform_device *pdev)
 	adc->common = dev_get_drvdata(pdev->dev.parent);
 	spin_lock_init(&adc->lock);
 	init_completion(&adc->completion);
-	adc->cfg = (const struct stm32_adc_cfg *)
-		of_match_device(dev->driver->of_match_table, dev)->data;
+	adc->cfg = device_get_match_data(dev);
 
 	indio_dev->name = dev_name(&pdev->dev);
-	indio_dev->dev.of_node = pdev->dev.of_node;
+	device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev));
 	indio_dev->info = &stm32_adc_iio_info;
 	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
 
 	platform_set_drvdata(pdev, indio_dev);
 
-	ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
+	ret = device_property_read_u32(dev, "reg", &adc->offset);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "missing reg property\n");
 		return -EINVAL;
@@ -2259,7 +2271,7 @@  static int stm32_adc_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = stm32_adc_of_get_resolution(indio_dev);
+	ret = stm32_adc_fw_get_resolution(indio_dev);
 	if (ret < 0)
 		return ret;
 
@@ -2276,7 +2288,7 @@  static int stm32_adc_probe(struct platform_device *pdev)
 		timestamping = true;
 	}
 
-	ret = stm32_adc_chan_of_init(indio_dev, timestamping);
+	ret = stm32_adc_chan_fw_init(indio_dev, timestamping);
 	if (ret < 0)
 		goto err_dma_disable;