| Message ID | 20220618024459.7554-2-bharat.kumar.gogada@xilinx.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for Xilinx Versal CPM5 Root Port | expand |
On Sat, 18 Jun 2022 08:14:58 +0530, Bharat Kumar Gogada wrote: > Xilinx Versal Premium series has CPM5 block which supports Root Port > functionality at Gen5 speed. > > Add support for YAML schemas documentation for Versal CPM5 Root Port driver. > > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> > --- > .../bindings/pci/xilinx-versal-cpm.yaml | 38 ++++++++++++++++++- > 1 file changed, 37 insertions(+), 1 deletion(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml:17:7: [warning] wrong indentation: expected 4 but found 6 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
> On Sat, 18 Jun 2022 08:14:58 +0530, Bharat Kumar Gogada wrote: > > Xilinx Versal Premium series has CPM5 block which supports Root Port > > functionality at Gen5 speed. > > > > Add support for YAML schemas documentation for Versal CPM5 Root Port > driver. > > > > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> > > --- > > .../bindings/pci/xilinx-versal-cpm.yaml | 38 ++++++++++++++++++- > > 1 file changed, 37 insertions(+), 1 deletion(-) > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m > dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > ./Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml:17:7: > [warning] wrong indentation: expected 4 but found 6 (indentation) > > dtschema/dtc warnings/errors: > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/patch/ > > This check can fail if there are any dependencies. The base for a patch series > is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above error(s), > then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. Hi Rob, will check and re submit. Regards, Bharat
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index cca395317a4c..133a7a74e6ac 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -14,17 +14,23 @@ allOf: properties: compatible: - const: xlnx,versal-cpm-host-1.00 + enum: + - xlnx,versal-cpm-host-1.00 + - xlnx,versal-cpm5-host reg: items: - description: CPM system level control and status registers. - description: Configuration space region and bridge registers. + - description: CPM5 control and status registers. + minItems: 2 reg-names: items: - const: cpm_slcr - const: cfg + - const: cpm_csr + minItems: 2 interrupts: maxItems: 1 @@ -95,4 +101,34 @@ examples: interrupt-controller; }; }; + + cpm5_pcie: pcie@fcdd0000 { + compatible = "xlnx,versal-cpm5-host"; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <0 72 4>; + interrupt-parent = <&gic>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc_1 0>, + <0 0 0 2 &pcie_intc_1 1>, + <0 0 0 3 &pcie_intc_1 2>, + <0 0 0 4 &pcie_intc_1 3>; + bus-range = <0x00 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, + <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; + msi-map = <0x0 &its_gic 0x0 0x10000>; + reg = <0x00 0xfcdd0000 0x00 0x1000>, + <0x06 0x00000000 0x00 0x1000000>, + <0x00 0xfce20000 0x00 0x1000000>; + reg-names = "cpm_slcr", "cfg", "cpm_csr"; + + pcie_intc_1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + };
Xilinx Versal Premium series has CPM5 block which supports Root Port functionality at Gen5 speed. Add support for YAML schemas documentation for Versal CPM5 Root Port driver. Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> --- .../bindings/pci/xilinx-versal-cpm.yaml | 38 ++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-)