diff mbox series

drm/ast: Fix black screen when getting out of suspend

Message ID 20220622124815.356035-1-jfalempe@redhat.com (mailing list archive)
State New, archived
Headers show
Series drm/ast: Fix black screen when getting out of suspend | expand

Commit Message

Jocelyn Falempe June 22, 2022, 12:48 p.m. UTC
With an AST2600, the screen is garbage when going out of suspend.
This is because color settings are lost, and not restored on resume.
Force the color settings on DPMS_ON, to make sure the settings are correct.

I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
https://www.aspeedtech.com/support_driver/

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>
---
 drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Lyude Paul June 22, 2022, 6:34 p.m. UTC | #1
Some small nitpicks:

On Wed, 2022-06-22 at 14:48 +0200, Jocelyn Falempe wrote:
> With an AST2600, the screen is garbage when going out of suspend.
> This is because color settings are lost, and not restored on resume.
> Force the color settings on DPMS_ON, to make sure the settings are correct.
> 
> I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
> https://www.aspeedtech.com/support_driver/
> 
> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>

Should have a Cc: to stable imho, `dim` can do this for you:

https://drm.pages.freedesktop.org/maintainer-tools/dim.html

> ---
>  drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
> index 3eb9afecd9d4..cdddcb5c4439 100644
> --- a/drivers/gpu/drm/ast/ast_mode.c
> +++ b/drivers/gpu/drm/ast/ast_mode.c
> @@ -990,6 +990,9 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int
> mode)
>  {
>         struct ast_private *ast = to_ast_private(crtc->dev);
>         u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
> +       struct ast_crtc_state *ast_state;
> +       const struct drm_format_info *format;
> +       struct ast_vbios_mode_info *vbios_mode_info;
>  
>         /* TODO: Maybe control display signal generation with
>          *       Sync Enable (bit CR17.7).
> @@ -1007,6 +1010,16 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int
> mode)
>                         ast_dp_set_on_off(crtc->dev, 1);
>                 }
>  
> +               ast_state = to_ast_crtc_state(crtc->state);
> +               format = ast_state->format;
> +
> +               if (format){

Should be a space between ')' and '{'.

With that fixed, this is: Reviewed-by: Lyude Paul <lyude@redhat.com>

> +                       vbios_mode_info = &ast_state->vbios_mode_info;
> +
> +                       ast_set_color_reg(ast, format);
> +                       ast_set_vbios_color_reg(ast, format,
> vbios_mode_info);
> +               }
> +
>                 ast_crtc_load_lut(ast, crtc);
>                 break;
>         case DRM_MODE_DPMS_STANDBY:
Thomas Zimmermann June 23, 2022, 8:20 a.m. UTC | #2
Hi

Am 22.06.22 um 14:48 schrieb Jocelyn Falempe:
> With an AST2600, the screen is garbage when going out of suspend.
> This is because color settings are lost, and not restored on resume.
> Force the color settings on DPMS_ON, to make sure the settings are correct.
> 
> I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
> https://www.aspeedtech.com/support_driver/
> 
> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>

With the small fixes that Lyude mentioned:

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>

Best regards
Thomas

> ---
>   drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
> index 3eb9afecd9d4..cdddcb5c4439 100644
> --- a/drivers/gpu/drm/ast/ast_mode.c
> +++ b/drivers/gpu/drm/ast/ast_mode.c
> @@ -990,6 +990,9 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
>   {
>   	struct ast_private *ast = to_ast_private(crtc->dev);
>   	u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
> +	struct ast_crtc_state *ast_state;
> +	const struct drm_format_info *format;
> +	struct ast_vbios_mode_info *vbios_mode_info;
>   
>   	/* TODO: Maybe control display signal generation with
>   	 *       Sync Enable (bit CR17.7).
> @@ -1007,6 +1010,16 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
>   			ast_dp_set_on_off(crtc->dev, 1);
>   		}
>   
> +		ast_state = to_ast_crtc_state(crtc->state);
> +		format = ast_state->format;
> +
> +		if (format){
> +			vbios_mode_info = &ast_state->vbios_mode_info;
> +
> +			ast_set_color_reg(ast, format);
> +			ast_set_vbios_color_reg(ast, format, vbios_mode_info);
> +		}
> +
>   		ast_crtc_load_lut(ast, crtc);
>   		break;
>   	case DRM_MODE_DPMS_STANDBY:
Jocelyn Falempe June 23, 2022, 8:21 a.m. UTC | #3
On 22/06/2022 20:34, Lyude Paul wrote:
> Some small nitpicks:
> 
> On Wed, 2022-06-22 at 14:48 +0200, Jocelyn Falempe wrote:
>> With an AST2600, the screen is garbage when going out of suspend.
>> This is because color settings are lost, and not restored on resume.
>> Force the color settings on DPMS_ON, to make sure the settings are correct.
>>
>> I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
>> https://www.aspeedtech.com/support_driver/
>>
>> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
>> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>
> 
> Should have a Cc: to stable imho, `dim` can do this for you:
> 
> https://drm.pages.freedesktop.org/maintainer-tools/dim.html

Sure I will add cc to stable for the v2
> 
>> ---
>>   drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
>>   1 file changed, 13 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
>> index 3eb9afecd9d4..cdddcb5c4439 100644
>> --- a/drivers/gpu/drm/ast/ast_mode.c
>> +++ b/drivers/gpu/drm/ast/ast_mode.c
>> @@ -990,6 +990,9 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int
>> mode)
>>   {
>>          struct ast_private *ast = to_ast_private(crtc->dev);
>>          u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
>> +       struct ast_crtc_state *ast_state;
>> +       const struct drm_format_info *format;
>> +       struct ast_vbios_mode_info *vbios_mode_info;
>>   
>>          /* TODO: Maybe control display signal generation with
>>           *       Sync Enable (bit CR17.7).
>> @@ -1007,6 +1010,16 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int
>> mode)
>>                          ast_dp_set_on_off(crtc->dev, 1);
>>                  }
>>   
>> +               ast_state = to_ast_crtc_state(crtc->state);
>> +               format = ast_state->format;
>> +
>> +               if (format){
> 
> Should be a space between ')' and '{'.

looks like I forget to run checkpatch.pl on it before sending :(

I'll wait a bit for other comments, and sent a v2 with cc for stable.
> 
> With that fixed, this is: Reviewed-by: Lyude Paul <lyude@redhat.com>
> 
>> +                       vbios_mode_info = &ast_state->vbios_mode_info;
>> +
>> +                       ast_set_color_reg(ast, format);
>> +                       ast_set_vbios_color_reg(ast, format,
>> vbios_mode_info);
>> +               }
>> +
>>                  ast_crtc_load_lut(ast, crtc);
>>                  break;
>>          case DRM_MODE_DPMS_STANDBY:
>
Thomas Zimmermann June 24, 2022, 7:31 a.m. UTC | #4
Hi

Am 22.06.22 um 14:48 schrieb Jocelyn Falempe:
> With an AST2600, the screen is garbage when going out of suspend.
> This is because color settings are lost, and not restored on resume.
> Force the color settings on DPMS_ON, to make sure the settings are correct.
> 
> I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
> https://www.aspeedtech.com/support_driver/
> 
> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>
> ---
>   drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
> index 3eb9afecd9d4..cdddcb5c4439 100644
> --- a/drivers/gpu/drm/ast/ast_mode.c
> +++ b/drivers/gpu/drm/ast/ast_mode.c
> @@ -990,6 +990,9 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
>   {
>   	struct ast_private *ast = to_ast_private(crtc->dev);
>   	u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
> +	struct ast_crtc_state *ast_state;
> +	const struct drm_format_info *format;
> +	struct ast_vbios_mode_info *vbios_mode_info;
>   
>   	/* TODO: Maybe control display signal generation with
>   	 *       Sync Enable (bit CR17.7).
> @@ -1007,6 +1010,16 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
>   			ast_dp_set_on_off(crtc->dev, 1);
>   		}
>   
> +		ast_state = to_ast_crtc_state(crtc->state);
> +		format = ast_state->format;
> +
> +		if (format){
> +			vbios_mode_info = &ast_state->vbios_mode_info;
> +
> +			ast_set_color_reg(ast, format);
> +			ast_set_vbios_color_reg(ast, format, vbios_mode_info);
> +		}
> +

I've seen suspend issues on other AST devices besides the 2600. This 
seems to be an improvement on AST2300 at least. Therefore

Tested-by: Thomas Zimmermann <tzimmermann@suse.de>

The DPMS code need to be integrated into atomic_enable at some point. 
(It's for a later patchset.) It's a relict of the old non-atomic 
modesetting that never got done correctly.

Best regards
Thomas

>   		ast_crtc_load_lut(ast, crtc);
>   		break;
>   	case DRM_MODE_DPMS_STANDBY:
Jocelyn Falempe June 27, 2022, 7:31 a.m. UTC | #5
On 23/06/2022 10:21, Jocelyn Falempe wrote:
> On 22/06/2022 20:34, Lyude Paul wrote:
>> Some small nitpicks:
>>
>> On Wed, 2022-06-22 at 14:48 +0200, Jocelyn Falempe wrote:
>>> With an AST2600, the screen is garbage when going out of suspend.
>>> This is because color settings are lost, and not restored on resume.
>>> Force the color settings on DPMS_ON, to make sure the settings are 
>>> correct.
>>>
>>> I didn't write this code, it comes from the out-of-tree aspeed driver 
>>> v1.13
>>> https://www.aspeedtech.com/support_driver/
>>>
>>> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
>>> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>
>>
>> Should have a Cc: to stable imho, `dim` can do this for you:
>>
>> https://drm.pages.freedesktop.org/maintainer-tools/dim.html
> 
> Sure I will add cc to stable for the v2

In fact it doesn't apply to older kernel version, (it depends on 
594e9c04b586 Create the driver for ASPEED proprietory Display-Port).

So I think I will just push it to drm-misc-next, with the indentation fixed.

>>
>>> ---
>>>   drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
>>>   1 file changed, 13 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/ast/ast_mode.c 
>>> b/drivers/gpu/drm/ast/ast_mode.c
>>> index 3eb9afecd9d4..cdddcb5c4439 100644
>>> --- a/drivers/gpu/drm/ast/ast_mode.c
>>> +++ b/drivers/gpu/drm/ast/ast_mode.c
>>> @@ -990,6 +990,9 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int
>>> mode)
>>>   {
>>>          struct ast_private *ast = to_ast_private(crtc->dev);
>>>          u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
>>> +       struct ast_crtc_state *ast_state;
>>> +       const struct drm_format_info *format;
>>> +       struct ast_vbios_mode_info *vbios_mode_info;
>>>          /* TODO: Maybe control display signal generation with
>>>           *       Sync Enable (bit CR17.7).
>>> @@ -1007,6 +1010,16 @@ static void ast_crtc_dpms(struct drm_crtc 
>>> *crtc, int
>>> mode)
>>>                          ast_dp_set_on_off(crtc->dev, 1);
>>>                  }
>>> +               ast_state = to_ast_crtc_state(crtc->state);
>>> +               format = ast_state->format;
>>> +
>>> +               if (format){
>>
>> Should be a space between ')' and '{'.
> 
> looks like I forget to run checkpatch.pl on it before sending :(
> 
> I'll wait a bit for other comments, and sent a v2 with cc for stable.
>>
>> With that fixed, this is: Reviewed-by: Lyude Paul <lyude@redhat.com>
>>
>>> +                       vbios_mode_info = &ast_state->vbios_mode_info;
>>> +
>>> +                       ast_set_color_reg(ast, format);
>>> +                       ast_set_vbios_color_reg(ast, format,
>>> vbios_mode_info);
>>> +               }
>>> +
>>>                  ast_crtc_load_lut(ast, crtc);
>>>                  break;
>>>          case DRM_MODE_DPMS_STANDBY:
>>
>
Thomas Zimmermann June 27, 2022, 7:39 a.m. UTC | #6
Am 27.06.22 um 09:31 schrieb Jocelyn Falempe:
> On 23/06/2022 10:21, Jocelyn Falempe wrote:
>> On 22/06/2022 20:34, Lyude Paul wrote:
>>> Some small nitpicks:
>>>
>>> On Wed, 2022-06-22 at 14:48 +0200, Jocelyn Falempe wrote:
>>>> With an AST2600, the screen is garbage when going out of suspend.
>>>> This is because color settings are lost, and not restored on resume.
>>>> Force the color settings on DPMS_ON, to make sure the settings are 
>>>> correct.
>>>>
>>>> I didn't write this code, it comes from the out-of-tree aspeed 
>>>> driver v1.13
>>>> https://www.aspeedtech.com/support_driver/
>>>>
>>>> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
>>>> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>
>>>
>>> Should have a Cc: to stable imho, `dim` can do this for you:
>>>
>>> https://drm.pages.freedesktop.org/maintainer-tools/dim.html
>>
>> Sure I will add cc to stable for the v2
> 
> In fact it doesn't apply to older kernel version, (it depends on 
> 594e9c04b586 Create the driver for ASPEED proprietory Display-Port).
> 
> So I think I will just push it to drm-misc-next, with the indentation 
> fixed.

Sure, go ahead.

> 
>>>
>>>> ---
>>>>   drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
>>>>   1 file changed, 13 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/ast/ast_mode.c 
>>>> b/drivers/gpu/drm/ast/ast_mode.c
>>>> index 3eb9afecd9d4..cdddcb5c4439 100644
>>>> --- a/drivers/gpu/drm/ast/ast_mode.c
>>>> +++ b/drivers/gpu/drm/ast/ast_mode.c
>>>> @@ -990,6 +990,9 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, 
>>>> int
>>>> mode)
>>>>   {
>>>>          struct ast_private *ast = to_ast_private(crtc->dev);
>>>>          u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
>>>> +       struct ast_crtc_state *ast_state;
>>>> +       const struct drm_format_info *format;
>>>> +       struct ast_vbios_mode_info *vbios_mode_info;
>>>>          /* TODO: Maybe control display signal generation with
>>>>           *       Sync Enable (bit CR17.7).
>>>> @@ -1007,6 +1010,16 @@ static void ast_crtc_dpms(struct drm_crtc 
>>>> *crtc, int
>>>> mode)
>>>>                          ast_dp_set_on_off(crtc->dev, 1);
>>>>                  }
>>>> +               ast_state = to_ast_crtc_state(crtc->state);
>>>> +               format = ast_state->format;
>>>> +
>>>> +               if (format){
>>>
>>> Should be a space between ')' and '{'.
>>
>> looks like I forget to run checkpatch.pl on it before sending :(
>>
>> I'll wait a bit for other comments, and sent a v2 with cc for stable.
>>>
>>> With that fixed, this is: Reviewed-by: Lyude Paul <lyude@redhat.com>
>>>
>>>> +                       vbios_mode_info = &ast_state->vbios_mode_info;
>>>> +
>>>> +                       ast_set_color_reg(ast, format);
>>>> +                       ast_set_vbios_color_reg(ast, format,
>>>> vbios_mode_info);
>>>> +               }
>>>> +
>>>>                  ast_crtc_load_lut(ast, crtc);
>>>>                  break;
>>>>          case DRM_MODE_DPMS_STANDBY:
>>>
>>
>
Jocelyn Falempe June 27, 2022, 8:45 a.m. UTC | #7
On 27/06/2022 09:39, Thomas Zimmermann wrote:
> 
> 
> Am 27.06.22 um 09:31 schrieb Jocelyn Falempe:
>> On 23/06/2022 10:21, Jocelyn Falempe wrote:
>>> On 22/06/2022 20:34, Lyude Paul wrote:
>>>> Some small nitpicks:
>>>>
>>>> On Wed, 2022-06-22 at 14:48 +0200, Jocelyn Falempe wrote:
>>>>> With an AST2600, the screen is garbage when going out of suspend.
>>>>> This is because color settings are lost, and not restored on resume.
>>>>> Force the color settings on DPMS_ON, to make sure the settings are 
>>>>> correct.
>>>>>
>>>>> I didn't write this code, it comes from the out-of-tree aspeed 
>>>>> driver v1.13
>>>>> https://www.aspeedtech.com/support_driver/
>>>>>
>>>>> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
>>>>> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>
>>>>
>>>> Should have a Cc: to stable imho, `dim` can do this for you:
>>>>
>>>> https://drm.pages.freedesktop.org/maintainer-tools/dim.html
>>>
>>> Sure I will add cc to stable for the v2
>>
>> In fact it doesn't apply to older kernel version, (it depends on 
>> 594e9c04b586 Create the driver for ASPEED proprietory Display-Port).
>>
>> So I think I will just push it to drm-misc-next, with the indentation 
>> fixed.
> 
> Sure, go ahead.

Applied to drm-misc-next, thank you all.

> 
>>
>>>>
>>>>> ---
>>>>>   drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
>>>>>   1 file changed, 13 insertions(+)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/ast/ast_mode.c 
>>>>> b/drivers/gpu/drm/ast/ast_mode.c
>>>>> index 3eb9afecd9d4..cdddcb5c4439 100644
>>>>> --- a/drivers/gpu/drm/ast/ast_mode.c
>>>>> +++ b/drivers/gpu/drm/ast/ast_mode.c
>>>>> @@ -990,6 +990,9 @@ static void ast_crtc_dpms(struct drm_crtc 
>>>>> *crtc, int
>>>>> mode)
>>>>>   {
>>>>>          struct ast_private *ast = to_ast_private(crtc->dev);
>>>>>          u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
>>>>> +       struct ast_crtc_state *ast_state;
>>>>> +       const struct drm_format_info *format;
>>>>> +       struct ast_vbios_mode_info *vbios_mode_info;
>>>>>          /* TODO: Maybe control display signal generation with
>>>>>           *       Sync Enable (bit CR17.7).
>>>>> @@ -1007,6 +1010,16 @@ static void ast_crtc_dpms(struct drm_crtc 
>>>>> *crtc, int
>>>>> mode)
>>>>>                          ast_dp_set_on_off(crtc->dev, 1);
>>>>>                  }
>>>>> +               ast_state = to_ast_crtc_state(crtc->state);
>>>>> +               format = ast_state->format;
>>>>> +
>>>>> +               if (format){
>>>>
>>>> Should be a space between ')' and '{'.
>>>
>>> looks like I forget to run checkpatch.pl on it before sending :(
>>>
>>> I'll wait a bit for other comments, and sent a v2 with cc for stable.
>>>>
>>>> With that fixed, this is: Reviewed-by: Lyude Paul <lyude@redhat.com>
>>>>
>>>>> +                       vbios_mode_info = &ast_state->vbios_mode_info;
>>>>> +
>>>>> +                       ast_set_color_reg(ast, format);
>>>>> +                       ast_set_vbios_color_reg(ast, format,
>>>>> vbios_mode_info);
>>>>> +               }
>>>>> +
>>>>>                  ast_crtc_load_lut(ast, crtc);
>>>>>                  break;
>>>>>          case DRM_MODE_DPMS_STANDBY:
>>>>
>>>
>>
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 3eb9afecd9d4..cdddcb5c4439 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -990,6 +990,9 @@  static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct ast_private *ast = to_ast_private(crtc->dev);
 	u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
+	struct ast_crtc_state *ast_state;
+	const struct drm_format_info *format;
+	struct ast_vbios_mode_info *vbios_mode_info;
 
 	/* TODO: Maybe control display signal generation with
 	 *       Sync Enable (bit CR17.7).
@@ -1007,6 +1010,16 @@  static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
 			ast_dp_set_on_off(crtc->dev, 1);
 		}
 
+		ast_state = to_ast_crtc_state(crtc->state);
+		format = ast_state->format;
+
+		if (format){
+			vbios_mode_info = &ast_state->vbios_mode_info;
+
+			ast_set_color_reg(ast, format);
+			ast_set_vbios_color_reg(ast, format, vbios_mode_info);
+		}
+
 		ast_crtc_load_lut(ast, crtc);
 		break;
 	case DRM_MODE_DPMS_STANDBY: