diff mbox series

Add quirk to enable Avid Mbox 3 support

Message ID 20220417025459.8105-1-connerknoxpublic@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add quirk to enable Avid Mbox 3 support | expand

Commit Message

connerknoxpublic@gmail.com April 17, 2022, 2:54 a.m. UTC
From: Conner Knox <connerknoxpublic@gmail.com>

Hi all,

I believe these are the right emails to send this patch to,
but if I've missed something please let me know.

This patch enables the Avid Mbox 3 audio interface to
be used through ALSA.  It locks the device at a 48khz sample rate.
Then it mutes and raises the appropriate channels/inputs to allow
for expected functionality.

Thanks for your time.

---
 sound/usb/quirks-table.h |  76 ++++++++++
 sound/usb/quirks.c       | 311 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 387 insertions(+)

Comments

Manuel Barrio Linares Aug. 16, 2022, 12:44 a.m. UTC | #1
> Hi all,
> 
> I believe these are the right emails to send this patch to,
> but if I've missed something please let me know.
> 
> This patch enables the Avid Mbox 3 audio interface to
> be used through ALSA.  It locks the device at a 48khz sample rate.
> Then it mutes and raises the appropriate channels/inputs to allow
> for expected functionality.
> 
> Thanks for your time.

Thanks Conner for taking the time to write and submit this!

I have an MBox 3 (USB) and I've tested the patch:

1. Have not tested S/PDIF i/o because I don't have hardware to plug it.
2. Output is in mono. It seems the monitor outputs work only in MONO. 
   (with and without the front mono button switched on or off).
3. Haven't tested if Headphones output work in stereo because I don't
   have hardware for testing.
3. Inputs work great. 

I'll get a stereo 1/4'' jack to 3.5mm for testing the headphones out.
You can contact me directly if needed.
Takashi Iwai Aug. 16, 2022, 6:04 a.m. UTC | #2
On Tue, 16 Aug 2022 02:44:27 +0200,
mbarriolinares wrote:
> 
> > Hi all,
> > 
> > I believe these are the right emails to send this patch to,
> > but if I've missed something please let me know.
> > 
> > This patch enables the Avid Mbox 3 audio interface to
> > be used through ALSA.  It locks the device at a 48khz sample rate.
> > Then it mutes and raises the appropriate channels/inputs to allow
> > for expected functionality.
> > 
> > Thanks for your time.
> 
> Thanks Conner for taking the time to write and submit this!
> 
> I have an MBox 3 (USB) and I've tested the patch:
> 
> 1. Have not tested S/PDIF i/o because I don't have hardware to plug it.
> 2. Output is in mono. It seems the monitor outputs work only in MONO. 
>    (with and without the front mono button switched on or off).
> 3. Haven't tested if Headphones output work in stereo because I don't
>    have hardware for testing.
> 3. Inputs work great. 
> 
> I'll get a stereo 1/4'' jack to 3.5mm for testing the headphones out.
> You can contact me directly if needed.

It seems that I overlooked this patch some how.

Through a quick glance, the patch needs the proper Signed-off-by line,
at least, for merging to the upstream.  Also, simple memset() with
zero could be used for clearing the com_buf.  Otherwise, it's fine to
apply as long as the stuff works more or less (at least improving
things).


thanks,

Takashi
diff mbox series

Patch

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 0ea39565e623..5f43863e5a5f 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2978,6 +2978,82 @@  YAMAHA_DEVICE(0x7010, "UB99"),
 		}
 	}
 },
+/* DIGIDESIGN MBOX 3 */
+{
+	USB_DEVICE(0x0dba, 0x5000),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "Digidesign",
+		.product_name = "Mbox 3",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 4,
+					.iface = 2,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.attributes = 0x00,
+					.endpoint = 0x01,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+			{
+				.ifnum = 3,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 4,
+					.iface = 3,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x81,
+					.attributes = 0x00,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.maxpacksize = 0x009c,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+			{
+				.ifnum = 4,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 {
 	/* Tascam US122 MKII - playback-only support */
 	USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021),
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index ab9f3da49941..e7caa7eeb955 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1020,6 +1020,313 @@  static int snd_usb_axefx3_boot_quirk(struct usb_device *dev)
 	return 0;
 }
 
+static void mbox3_setup_48_24_magic(struct usb_device *dev)
+{
+	u8 com_buff[4];
+
+	/* Load 48000Hz rate into buffer */
+	com_buff[0] = 0x80;
+	com_buff[1] = 0xbb;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+
+	/* Set 48000Hz sample rate */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x01, 0x21, 0x0100, 0x0001, &com_buff, 0x0004);
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x01, 0x21, 0x0100, 0x8101, &com_buff, 0x0004);
+
+	/* Set clock source to Internal (as opposed to S/PDIF) */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x01;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x8001, &com_buff, 1);
+
+	/* Mute the hardware loopbacks to start the device in a known state.
+	 * The Mbox 3 is little endian and
+	 * the data written here seems a bit odd.
+	 * 0x8000 (shown in big endian form) is muted
+	 * and volume increases to 0xffff it seems.
+	 * I've yet to observe 0xffff being sent.
+	 * Instead, full volume seems to be 0x0000.
+	 * Per my understanding of 16 bit integers, this is seems strange, but maybe I'm missing something
+	 */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	/* Analogue input 1 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0110, 0x4001, &com_buff, 2);
+	/* Analogue input 1 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0111, 0x4001, &com_buff, 2);
+	/* Analogue input 2 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0114, 0x4001, &com_buff, 2);
+	/* Analogue input 2 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0115, 0x4001, &com_buff, 2);
+	/* Analogue input 3 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0118, 0x4001, &com_buff, 2);
+	/* Analogue input 3 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0119, 0x4001, &com_buff, 2);
+	/* Analogue input 4 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011c, 0x4001, &com_buff, 2);
+	/* Analogue input 4 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011d, 0x4001, &com_buff, 2);
+
+	/* Set software sends to output */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	/* Analogue software return 1 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x4001, &com_buff, 2);
+	/* Analogue software return 1 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0101, 0x4001, &com_buff, 2);
+	/* Analogue software return 2 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0104, 0x4001, &com_buff, 2);
+	/* Analogue software return 2 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0105, 0x4001, &com_buff, 2);
+	/* Analogue software return 3 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0108, 0x4001, &com_buff, 2);
+	/* Analogue software return 3 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0109, 0x4001, &com_buff, 2);
+	/* Analogue software return 4 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010c, 0x4001, &com_buff, 2);
+	/* Analogue software return 4 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010d, 0x4001, &com_buff, 2);
+
+	/* Return to muting sends */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	/* Analogue fx return left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0120, 0x4001, &com_buff, 2);
+	/* Analogue fx return right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0121, 0x4001, &com_buff, 2);
+
+	/* Analogue software input 1 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x4201, &com_buff, 2);
+	/* Analogue software input 2 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0101, 0x4201, &com_buff, 2);
+	/* Analogue software input 3 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0102, 0x4201, &com_buff, 2);
+	/* Analogue software input 4 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0103, 0x4201, &com_buff, 2);
+	/* Analogue input 1 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0104, 0x4201, &com_buff, 2);
+	/* Analogue input 2 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0105, 0x4201, &com_buff, 2);
+	/* Analogue input 3 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0106, 0x4201, &com_buff, 2);
+	/* Analogue input 4 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0107, 0x4201, &com_buff, 2);
+
+	/* Toggle allowing host control */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x02;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0000, 0x2001, &com_buff, 1);
+
+	/* Do not dim fx returns */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 3, 0x21, 0x0002, 0x2001, &com_buff, 1);
+
+	/* Do not set fx returns to mono */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 3, 0x21, 0x0001, 0x2001, &com_buff, 1);
+
+	/* Mute the S/PDIF hardware loopback
+	 * same odd volume logic here as above
+	 */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	/* S/PDIF hardware input 1 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0112, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 1 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0113, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 2 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0116, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 2 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0117, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 3 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011a, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 3 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011b, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 4 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011e, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 4 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011f, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 1 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0102, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 1 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0103, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 2 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0106, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 2 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0107, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 3 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010a, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 3 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010b, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 4 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010e, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 4 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010f, 0x4001, &com_buff, 2);
+	/* S/PDIF fx returns left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0122, 0x4001, &com_buff, 2);
+	/* S/PDIF fx returns right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0123, 0x4001, &com_buff, 2);
+
+	/* Set the dropdown "Effect" to the first option */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0200, 0x4301, &com_buff, 1);
+
+	/* Set the effect duration to 0 */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0400, 0x4301, &com_buff, 2);
+
+	/* Set the effect volume and feedback to 0 */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	/* feedback: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0500, 0x4301, &com_buff, 1);
+	/* volume: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0300, 0x4301, &com_buff, 1);
+
+	/* Set soft button hold duration */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x05;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0005, 0x2001, &com_buff, 1);
+
+	/* Use dim LEDs for button of state */
+	memset(com_buff, 0x00, 4);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	com_buff[2] = 0x00;
+	com_buff[3] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0004, 0x2001, &com_buff, 1);
+
+	return;
+}
+
+#define MBOX3_DESCRIPTOR_SIZE	464
+
+static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
+{
+	struct usb_host_config *config = dev->actconfig;
+	int err;
+	int descriptor_size;
+
+	descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
+
+	if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) {
+		dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size);
+		return -ENODEV;
+	}
+
+	dev_dbg(&dev->dev, "device initialised!\n");
+
+	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+		&dev->descriptor, sizeof(dev->descriptor));
+	config = dev->actconfig;
+	if (err < 0)
+		dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+
+	err = usb_reset_configuration(dev);
+	if (err < 0)
+		dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
+	dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n",
+		le16_to_cpu(get_cfg_desc(config)->wTotalLength));
+
+	mbox3_setup_48_24_magic(dev);
+	dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz");
+
+	return 0; /* Successful boot */
+}
 
 #define MICROBOOK_BUF_SIZE 128
 
@@ -1324,6 +1631,10 @@  int snd_usb_apply_boot_quirk(struct usb_device *dev,
 	case USB_ID(0x0dba, 0x3000):
 		/* Digidesign Mbox 2 */
 		return snd_usb_mbox2_boot_quirk(dev);
+	case USB_ID(0x0dba, 0x5000):
+		/* Digidesign Mbox 3 */
+		return snd_usb_mbox3_boot_quirk(dev);
+
 
 	case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */
 	case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */