diff mbox series

ar5523: check endpoints type and direction in probe()

Message ID 20220823222436.514204-1-mazinalhaddad05@gmail.com (mailing list archive)
State Superseded
Delegated to: Johannes Berg
Headers show
Series ar5523: check endpoints type and direction in probe() | expand

Commit Message

Mazin Al Haddad Aug. 23, 2022, 10:24 p.m. UTC
Fixes a bug reported by syzbot, where a warning occurs in usb_submit_urb()
due to the wrong endpoint type. There is no check for both the number
of endpoints and the type which causes an error as the code tries to
send a URB to the wrong endpoint.

Fix it by adding a check for the number of endpoints and the
direction/type of the endpoints. If the endpoints do not match the 
expected configuration -ENODEV is returned.

Syzkaller report:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 71 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 1 PID: 71 Comm: kworker/1:2 Not tainted 5.19.0-rc7-syzkaller-00150-g32f02a211b0a #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 ar5523_cmd+0x420/0x790 drivers/net/wireless/ath/ar5523/ar5523.c:275
 ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline]
 ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline]
 ar5523_probe+0xc66/0x1da0 drivers/net/wireless/ath/ar5523/ar5523.c:1655


Link: https://syzkaller.appspot.com/bug?extid=1bc2c2afd44f820a669f
Reported-and-tested-by: syzbot+1bc2c2afd44f820a669f@syzkaller.appspotmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
---
 drivers/net/wireless/ath/ar5523/ar5523.c | 31 ++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Comments

Greg Kroah-Hartman Aug. 24, 2022, 6:04 a.m. UTC | #1
On Wed, Aug 24, 2022 at 01:24:38AM +0300, Mazin Al Haddad wrote:
> Fixes a bug reported by syzbot, where a warning occurs in usb_submit_urb()
> due to the wrong endpoint type. There is no check for both the number
> of endpoints and the type which causes an error as the code tries to
> send a URB to the wrong endpoint.
> 
> Fix it by adding a check for the number of endpoints and the
> direction/type of the endpoints. If the endpoints do not match the 
> expected configuration -ENODEV is returned.
> 
> Syzkaller report:
> 
> usb 1-1: BOGUS urb xfer, pipe 3 != type 1
> WARNING: CPU: 1 PID: 71 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
> Modules linked in:
> CPU: 1 PID: 71 Comm: kworker/1:2 Not tainted 5.19.0-rc7-syzkaller-00150-g32f02a211b0a #0
> Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
> Workqueue: usb_hub_wq hub_event
> Call Trace:
>  <TASK>
>  ar5523_cmd+0x420/0x790 drivers/net/wireless/ath/ar5523/ar5523.c:275
>  ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline]
>  ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline]
>  ar5523_probe+0xc66/0x1da0 drivers/net/wireless/ath/ar5523/ar5523.c:1655
> 
> 
> Link: https://syzkaller.appspot.com/bug?extid=1bc2c2afd44f820a669f
> Reported-and-tested-by: syzbot+1bc2c2afd44f820a669f@syzkaller.appspotmail.com
> Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
> ---
>  drivers/net/wireless/ath/ar5523/ar5523.c | 31 ++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
> index 6f937d2cc126..5451bf9ab9fb 100644
> --- a/drivers/net/wireless/ath/ar5523/ar5523.c
> +++ b/drivers/net/wireless/ath/ar5523/ar5523.c
> @@ -1581,8 +1581,39 @@ static int ar5523_probe(struct usb_interface *intf,
>  	struct usb_device *dev = interface_to_usbdev(intf);
>  	struct ieee80211_hw *hw;
>  	struct ar5523 *ar;
> +	struct usb_host_interface *host = intf->cur_altsetting;
>  	int error = -ENOMEM;
>  
> +	if (host->desc.bNumEndpoints != 4) {
> +		dev_err(&dev->dev, "Wrong number of endpoints\n");
> +		return -ENODEV;
> +	}
> +
> +	for (int i = 0; i < host->desc.bNumEndpoints; ++i) {
> +		struct usb_endpoint_descriptor *ep = &host->endpoint[i].desc;
> +		// Check for type of endpoint and direction.
> +		switch (i) {
> +		case 0:
> +		case 1:
> +			if ((ep->bEndpointAddress & USB_DIR_OUT) &&
> +			    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
> +			     == USB_ENDPOINT_XFER_BULK)){

Did you run your change through checkpatch?

> +				dev_err(&dev->dev, "Wrong type of endpoints\n");
> +				return -ENODEV;
> +			}
> +			break;
> +		case 2:
> +		case 3:
> +			if ((ep->bEndpointAddress & USB_DIR_IN) &&
> +			    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
> +			     == USB_ENDPOINT_XFER_BULK)){
> +				dev_err(&dev->dev, "Wrong type of endpoints\n");
> +				return -ENODEV;
> +			}
> +			break;
> +		}

We have usb helper functions for all of this, why not use them instead
of attempting to roll your own?

thanks,

greg k-h
Mazin Al Haddad Aug. 27, 2022, 10:36 a.m. UTC | #2
On Wed Aug 24, 2022 at 9:04 AM +03, Greg KH wrote:
> On Wed, Aug 24, 2022 at 01:24:38AM +0300, Mazin Al Haddad wrote:
> > Fixes a bug reported by syzbot, where a warning occurs in usb_submit_urb()
> > due to the wrong endpoint type. There is no check for both the number
> > of endpoints and the type which causes an error as the code tries to
> > send a URB to the wrong endpoint.
> > 
> > Fix it by adding a check for the number of endpoints and the
> > direction/type of the endpoints. If the endpoints do not match the 
> > expected configuration -ENODEV is returned.
> > 
> > Syzkaller report:
> > 
> > usb 1-1: BOGUS urb xfer, pipe 3 != type 1
> > WARNING: CPU: 1 PID: 71 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
> > Modules linked in:
> > CPU: 1 PID: 71 Comm: kworker/1:2 Not tainted 5.19.0-rc7-syzkaller-00150-g32f02a211b0a #0
> > Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
> > Workqueue: usb_hub_wq hub_event
> > Call Trace:
> >  <TASK>
> >  ar5523_cmd+0x420/0x790 drivers/net/wireless/ath/ar5523/ar5523.c:275
> >  ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline]
> >  ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline]
> >  ar5523_probe+0xc66/0x1da0 drivers/net/wireless/ath/ar5523/ar5523.c:1655
> > 
> > 
> > Link: https://syzkaller.appspot.com/bug?extid=1bc2c2afd44f820a669f
> > Reported-and-tested-by: syzbot+1bc2c2afd44f820a669f@syzkaller.appspotmail.com
> > Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
> > ---
> >  drivers/net/wireless/ath/ar5523/ar5523.c | 31 ++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> > 
> > diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
> > index 6f937d2cc126..5451bf9ab9fb 100644
> > --- a/drivers/net/wireless/ath/ar5523/ar5523.c
> > +++ b/drivers/net/wireless/ath/ar5523/ar5523.c
> > @@ -1581,8 +1581,39 @@ static int ar5523_probe(struct usb_interface *intf,
> >  	struct usb_device *dev = interface_to_usbdev(intf);
> >  	struct ieee80211_hw *hw;
> >  	struct ar5523 *ar;
> > +	struct usb_host_interface *host = intf->cur_altsetting;
> >  	int error = -ENOMEM;
> >  
> > +	if (host->desc.bNumEndpoints != 4) {
> > +		dev_err(&dev->dev, "Wrong number of endpoints\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	for (int i = 0; i < host->desc.bNumEndpoints; ++i) {
> > +		struct usb_endpoint_descriptor *ep = &host->endpoint[i].desc;
> > +		// Check for type of endpoint and direction.
> > +		switch (i) {
> > +		case 0:
> > +		case 1:
> > +			if ((ep->bEndpointAddress & USB_DIR_OUT) &&
> > +			    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
> > +			     == USB_ENDPOINT_XFER_BULK)){
>
> Did you run your change through checkpatch?

Yes.

> We have usb helper functions for all of this, why not use them instead
> of attempting to roll your own?

Using the helpers is indeed a lot better. I wasn't aware of all of them.
Since find_common_endpoints() won't work here, I used the helpers for 
checking direction/type. 

I'll send v3 now. If there are any more changes that you feel
are necessary please let me know, I'll be happy to incorporate them. 

Thanks!
Greg Kroah-Hartman Aug. 30, 2022, 12:09 p.m. UTC | #3
On Sat, Aug 27, 2022 at 01:36:29PM +0300, Mazin Al Haddad wrote:
> On Wed Aug 24, 2022 at 9:04 AM +03, Greg KH wrote:
> > On Wed, Aug 24, 2022 at 01:24:38AM +0300, Mazin Al Haddad wrote:
> > > Fixes a bug reported by syzbot, where a warning occurs in usb_submit_urb()
> > > due to the wrong endpoint type. There is no check for both the number
> > > of endpoints and the type which causes an error as the code tries to
> > > send a URB to the wrong endpoint.
> > > 
> > > Fix it by adding a check for the number of endpoints and the
> > > direction/type of the endpoints. If the endpoints do not match the 
> > > expected configuration -ENODEV is returned.
> > > 
> > > Syzkaller report:
> > > 
> > > usb 1-1: BOGUS urb xfer, pipe 3 != type 1
> > > WARNING: CPU: 1 PID: 71 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
> > > Modules linked in:
> > > CPU: 1 PID: 71 Comm: kworker/1:2 Not tainted 5.19.0-rc7-syzkaller-00150-g32f02a211b0a #0
> > > Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
> > > Workqueue: usb_hub_wq hub_event
> > > Call Trace:
> > >  <TASK>
> > >  ar5523_cmd+0x420/0x790 drivers/net/wireless/ath/ar5523/ar5523.c:275
> > >  ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline]
> > >  ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline]
> > >  ar5523_probe+0xc66/0x1da0 drivers/net/wireless/ath/ar5523/ar5523.c:1655
> > > 
> > > 
> > > Link: https://syzkaller.appspot.com/bug?extid=1bc2c2afd44f820a669f
> > > Reported-and-tested-by: syzbot+1bc2c2afd44f820a669f@syzkaller.appspotmail.com
> > > Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
> > > ---
> > >  drivers/net/wireless/ath/ar5523/ar5523.c | 31 ++++++++++++++++++++++++
> > >  1 file changed, 31 insertions(+)
> > > 
> > > diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
> > > index 6f937d2cc126..5451bf9ab9fb 100644
> > > --- a/drivers/net/wireless/ath/ar5523/ar5523.c
> > > +++ b/drivers/net/wireless/ath/ar5523/ar5523.c
> > > @@ -1581,8 +1581,39 @@ static int ar5523_probe(struct usb_interface *intf,
> > >  	struct usb_device *dev = interface_to_usbdev(intf);
> > >  	struct ieee80211_hw *hw;
> > >  	struct ar5523 *ar;
> > > +	struct usb_host_interface *host = intf->cur_altsetting;
> > >  	int error = -ENOMEM;
> > >  
> > > +	if (host->desc.bNumEndpoints != 4) {
> > > +		dev_err(&dev->dev, "Wrong number of endpoints\n");
> > > +		return -ENODEV;
> > > +	}
> > > +
> > > +	for (int i = 0; i < host->desc.bNumEndpoints; ++i) {
> > > +		struct usb_endpoint_descriptor *ep = &host->endpoint[i].desc;
> > > +		// Check for type of endpoint and direction.
> > > +		switch (i) {
> > > +		case 0:
> > > +		case 1:
> > > +			if ((ep->bEndpointAddress & USB_DIR_OUT) &&
> > > +			    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
> > > +			     == USB_ENDPOINT_XFER_BULK)){
> >
> > Did you run your change through checkpatch?
> 
> Yes.
> 
> > We have usb helper functions for all of this, why not use them instead
> > of attempting to roll your own?
> 
> Using the helpers is indeed a lot better. I wasn't aware of all of them.
> Since find_common_endpoints() won't work here, I used the helpers for 
> checking direction/type. 

I don't understand why usb_find_common_endpoints() will not work here.
It seems to be very generic and should work just fine.

thanks,

greg k-h
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 6f937d2cc126..5451bf9ab9fb 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -1581,8 +1581,39 @@  static int ar5523_probe(struct usb_interface *intf,
 	struct usb_device *dev = interface_to_usbdev(intf);
 	struct ieee80211_hw *hw;
 	struct ar5523 *ar;
+	struct usb_host_interface *host = intf->cur_altsetting;
 	int error = -ENOMEM;
 
+	if (host->desc.bNumEndpoints != 4) {
+		dev_err(&dev->dev, "Wrong number of endpoints\n");
+		return -ENODEV;
+	}
+
+	for (int i = 0; i < host->desc.bNumEndpoints; ++i) {
+		struct usb_endpoint_descriptor *ep = &host->endpoint[i].desc;
+		// Check for type of endpoint and direction.
+		switch (i) {
+		case 0:
+		case 1:
+			if ((ep->bEndpointAddress & USB_DIR_OUT) &&
+			    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			     == USB_ENDPOINT_XFER_BULK)){
+				dev_err(&dev->dev, "Wrong type of endpoints\n");
+				return -ENODEV;
+			}
+			break;
+		case 2:
+		case 3:
+			if ((ep->bEndpointAddress & USB_DIR_IN) &&
+			    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			     == USB_ENDPOINT_XFER_BULK)){
+				dev_err(&dev->dev, "Wrong type of endpoints\n");
+				return -ENODEV;
+			}
+			break;
+		}
+	}
+
 	/*
 	 * Load firmware if the device requires it.  This will return
 	 * -ENXIO on success and we'll get called back afer the usb