mbox series

[v3,00/15] wifi: ath11k: add support for 6 GHz station for various modes : LPI, SP and VLP

Message ID 20220913051518.23051-1-quic_wgong@quicinc.com (mailing list archive)
Headers show
Series wifi: ath11k: add support for 6 GHz station for various modes : LPI, SP and VLP | expand

Message

Wen Gong Sept. 13, 2022, 5:15 a.m. UTC 
v3: 
   1. added "ath11k: fix a possible dead lock caused by ab->base_lock".
   3. deleted "ath11k: add support for extended wmi service bit" which is alreay upstream.

v2:
   1. change some minor comments by Kalle.
   2. rebased to ath.git ath-202112220603

Depends on one patch:
[v5] cfg80211: save power spectral density(psd) of regulatory rule
https://patchwork.kernel.org/project/linux-wireless/patch/20210928085211.26186-1-wgong@codeaurora.org/

It introduced some new concept:
power type of AP(STANDARD_POWER_AP, INDOOR_AP, VERY_LOW_POWER_AP)
power type of STATION(DEFAULT_CLIENT, SUBORDINATE_CLIENT)
power spectral density(psd)

This patchset is to implement the new rules for 6 GHz band in
ath11k.

ath11k parsed the reg rules from new wmi event
WMI_REG_CHAN_LIST_CC_EXT_EVENTID and parse the
transmit power envelope element in beacon of AP
and then set new wmi cmd WMI_VDEV_SET_TPC_POWER_CMDID
to firmware when connect to 6G AP, also support backward
compatibility with firmware which not support new wmi
cmd WMI_VDEV_SET_TPC_POWER_CMDID.

Baochen Qiang (1):
  wifi: ath11k: fix a possible dead lock caused by ab->base_lock

Wen Gong (14):
  wifi: ath11k: Add support to parse new wmi event for 6 GHz regulatory
  wifi: ath11k: add support to select 6 GHz Regulatory type
  wifi: ath11k: allow only one interface up simultaneously for WCN6855
  wifi: ath11k: store cur_regulatory_info for each radio
  wifi: ath11k: update regulatory rules when interface added
  wifi: ath11k: update regulatory rules when connect to AP on 6 GHz band
    for station
  wifi: ath11k: save power spectral density(psd) of regulatory rule
  wifi: ath11k: add parse of transmit power envelope element
  wifi: ath11k: save max tx power in vdev start response event from
    firmware
  wifi: ath11k: fill parameters for vdev_set_tpc_power wmi command
  wifi: ath11k: add WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT service bit
  wifi: ath11k: discard BSS_CHANGED_TXPOWER when EXT_TPC_REG_SUPPORT for
    6 GHz
  wifi: ath11k: add handler for WMI_VDEV_SET_TPC_POWER_CMDID
  wifi: ath11k: send TPC power to firmware for 6 GHz station

 drivers/net/wireless/ath/ath11k/core.c |   6 +
 drivers/net/wireless/ath/ath11k/core.h |  40 ++
 drivers/net/wireless/ath/ath11k/hw.c   |  17 +
 drivers/net/wireless/ath/ath11k/hw.h   |   5 +
 drivers/net/wireless/ath/ath11k/mac.c  | 539 +++++++++++++++++-
 drivers/net/wireless/ath/ath11k/mac.h  |   5 +-
 drivers/net/wireless/ath/ath11k/reg.c  | 105 +++-
 drivers/net/wireless/ath/ath11k/reg.h  |   6 +-
 drivers/net/wireless/ath/ath11k/wmi.c  | 728 +++++++++++++++++++++++--
 drivers/net/wireless/ath/ath11k/wmi.h  | 210 +++++++
 10 files changed, 1608 insertions(+), 53 deletions(-)


base-commit: e5da5e8c54e27d8fa86765cd733c1a05aee53ae9
prerequisite-patch-id: d0941cb1e08f82e9bd5feaf01b160807b4b0faa9
prerequisite-patch-id: 8ed14a45e891683ebc28d3fe1c9405430561b09f

Comments

Kalle Valo Sept. 13, 2022, 7:09 a.m. UTC | #1 
Wen Gong <quic_wgong@quicinc.com> writes:

> v3: 
>    1. added "ath11k: fix a possible dead lock caused by ab->base_lock".
>    3. deleted "ath11k: add support for extended wmi service bit" which is alreay upstream.
>
> v2:
>    1. change some minor comments by Kalle.
>    2. rebased to ath.git ath-202112220603
>
> Depends on one patch:
> [v5] cfg80211: save power spectral density(psd) of regulatory rule
> https://patchwork.kernel.org/project/linux-wireless/patch/20210928085211.26186-1-wgong@codeaurora.org/

The dependency is in "Changes Requested" state so I'll mark this the
same.