diff mbox series

[v3] xhci: tegra: USB2 pad power controls

Message ID 20221012102511.3093-1-jilin@nvidia.com (mailing list archive)
State Superseded
Headers show
Series [v3] xhci: tegra: USB2 pad power controls | expand

Commit Message

Jim Lin Oct. 12, 2022, 10:25 a.m. UTC
Program USB2 pad PD controls during port connect/disconnect, port
suspend/resume, and test mode, to reduce power consumption on
disconnect or suspend.

Signed-off-by: Jim Lin <jilin@nvidia.com>
---
v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
v3: No change on copyright

 drivers/usb/host/xhci-tegra.c | 139 +++++++++++++++++++++++++++++++++-
 1 file changed, 138 insertions(+), 1 deletion(-)

Comments

Greg KH Oct. 12, 2022, 11:18 a.m. UTC | #1
On Wed, Oct 12, 2022 at 06:25:11PM +0800, Jim Lin wrote:
> +static inline struct tegra_xusb *hcd_to_tegra_xusb(struct usb_hcd *hcd)
> +{
> +	return (struct tegra_xusb *) dev_get_drvdata(hcd->self.controller);

No need for the cast (and if there was, no need for the extra space).

thanks,

greg k-h
Jon Hunter Oct. 12, 2022, 11:43 a.m. UTC | #2
On 12/10/2022 12:18, Greg KH wrote:
> On Wed, Oct 12, 2022 at 06:25:11PM +0800, Jim Lin wrote:
>> +static inline struct tegra_xusb *hcd_to_tegra_xusb(struct usb_hcd *hcd)
>> +{
>> +	return (struct tegra_xusb *) dev_get_drvdata(hcd->self.controller);
> 
> No need for the cast (and if there was, no need for the extra space).

May be best to drop this inline function completely and call 
dev_get_drvdata() directly. I only see it used in one place.

Jon
Jon Hunter Oct. 12, 2022, 11:45 a.m. UTC | #3
On 12/10/2022 11:25, Jim Lin wrote:
> Program USB2 pad PD controls during port connect/disconnect, port
> suspend/resume, and test mode, to reduce power consumption on
> disconnect or suspend.
> 
> Signed-off-by: Jim Lin <jilin@nvidia.com>
> ---
> v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
> v3: No change on copyright
> 
>   drivers/usb/host/xhci-tegra.c | 139 +++++++++++++++++++++++++++++++++-
>   1 file changed, 138 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
> index c8af2cd2216d..996182a1959f 100644
> --- a/drivers/usb/host/xhci-tegra.c
> +++ b/drivers/usb/host/xhci-tegra.c
> @@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
>   	} fpci;
>   };
>   
> +enum tegra_xhci_phy_type {
> +	USB3_PHY,
> +	USB2_PHY,
> +	HSIC_PHY,
> +	MAX_PHY_TYPES,
> +};
> +
>   struct tegra_xusb_soc {
>   	const char *firmware;
>   	const char * const *supply_names;
> @@ -274,9 +281,17 @@ struct tegra_xusb {
>   
>   	bool suspended;
>   	struct tegra_xusb_context context;
> +	u32 enable_utmi_pad_after_lp0_exit;
>   };
>   
>   static struct hc_driver __read_mostly tegra_xhci_hc_driver;
> +static int (*original_xhci_hub_control)(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
> +	    char *buf, u16 wLength);

Is it better to add this function pointer to the tegra_xusb structure?

Jon
Jim Lin Oct. 14, 2022, 9:41 a.m. UTC | #4
On Wed, 2022-10-12 at 12:43 +0100, Jon Hunter wrote:
> On 12/10/2022 12:18, Greg KH wrote:
> > On Wed, Oct 12, 2022 at 06:25:11PM +0800, Jim Lin wrote:
> > > +static inline struct tegra_xusb *hcd_to_tegra_xusb(struct
> > > usb_hcd *hcd)
> > > +{
> > > +	return (struct tegra_xusb *) dev_get_drvdata(hcd-
> > > >self.controller);
> > 
> > No need for the cast (and if there was, no need for the extra
> > space).
> 
> May be best to drop this inline function completely and call 
> dev_get_drvdata() directly. I only see it used in one place.
> 
> Jon
> 
Thanks, will do.

--nvpublic
Jim Lin Oct. 17, 2022, 9:36 a.m. UTC | #5
On Wed, 2022-10-12 at 12:45 +0100, Jon Hunter wrote:
> On 12/10/2022 11:25, Jim Lin wrote:
> > Program USB2 pad PD controls during port connect/disconnect, port
> > suspend/resume, and test mode, to reduce power consumption on
> > disconnect or suspend.
> > 
> > Signed-off-by: Jim Lin <jilin@nvidia.com>
> > ---
> > v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
> > v3: No change on copyright
> > 
> >   drivers/usb/host/xhci-tegra.c | 139
> > +++++++++++++++++++++++++++++++++-
> >   1 file changed, 138 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-
> > tegra.c
> > index c8af2cd2216d..996182a1959f 100644
> > --- a/drivers/usb/host/xhci-tegra.c
> > +++ b/drivers/usb/host/xhci-tegra.c
> > @@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
> >   	} fpci;
> >   };
> >   
> > +enum tegra_xhci_phy_type {
> > +	USB3_PHY,
> > +	USB2_PHY,
> > +	HSIC_PHY,
> > +	MAX_PHY_TYPES,
> > +};
> > +
> >   struct tegra_xusb_soc {
> >   	const char *firmware;
> >   	const char * const *supply_names;
> > @@ -274,9 +281,17 @@ struct tegra_xusb {
> >   
> >   	bool suspended;
> >   	struct tegra_xusb_context context;
> > +	u32 enable_utmi_pad_after_lp0_exit;
> >   };
> >   
> >   static struct hc_driver __read_mostly tegra_xhci_hc_driver;
> > +static int (*original_xhci_hub_control)(struct usb_hcd *hcd, u16
> > typeReq, u16 wValue, u16 wIndex,
> > +	    char *buf, u16 wLength);
> 
> Is it better to add this function pointer to the tegra_xusb
> structure?
> 
> Jon
> 
Do you mean removing variable "original_xhci_hub_control" and save
function pointer to the tegra_xusb structure ?

But that doesn't look possible over here to point to tegra_xusb
structure and save pointer (to tegra_xhci_hc_driver.hub_control) into
it.

"
static int __init tegra_xusb_init(void)
{
	xhci_init_driver(&tegra_xhci_hc_driver, &tegra_xhci_overrides);

	return platform_driver_register(&tegra_xusb_driver);
}
module_init(tegra_xusb_init);
"

--nvpublic
Jon Hunter Oct. 17, 2022, 8:17 p.m. UTC | #6
On 17/10/2022 10:36, Jim Lin wrote:
> On Wed, 2022-10-12 at 12:45 +0100, Jon Hunter wrote:
>> On 12/10/2022 11:25, Jim Lin wrote:
>>> Program USB2 pad PD controls during port connect/disconnect, port
>>> suspend/resume, and test mode, to reduce power consumption on
>>> disconnect or suspend.
>>>
>>> Signed-off-by: Jim Lin <jilin@nvidia.com>
>>> ---
>>> v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
>>> v3: No change on copyright
>>>
>>>    drivers/usb/host/xhci-tegra.c | 139
>>> +++++++++++++++++++++++++++++++++-
>>>    1 file changed, 138 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-
>>> tegra.c
>>> index c8af2cd2216d..996182a1959f 100644
>>> --- a/drivers/usb/host/xhci-tegra.c
>>> +++ b/drivers/usb/host/xhci-tegra.c
>>> @@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
>>>    	} fpci;
>>>    };
>>>    
>>> +enum tegra_xhci_phy_type {
>>> +	USB3_PHY,
>>> +	USB2_PHY,
>>> +	HSIC_PHY,
>>> +	MAX_PHY_TYPES,
>>> +};
>>> +
>>>    struct tegra_xusb_soc {
>>>    	const char *firmware;
>>>    	const char * const *supply_names;
>>> @@ -274,9 +281,17 @@ struct tegra_xusb {
>>>    
>>>    	bool suspended;
>>>    	struct tegra_xusb_context context;
>>> +	u32 enable_utmi_pad_after_lp0_exit;
>>>    };
>>>    
>>>    static struct hc_driver __read_mostly tegra_xhci_hc_driver;
>>> +static int (*original_xhci_hub_control)(struct usb_hcd *hcd, u16
>>> typeReq, u16 wValue, u16 wIndex,
>>> +	    char *buf, u16 wLength);
>>
>> Is it better to add this function pointer to the tegra_xusb
>> structure?
>>
>> Jon
>>
> Do you mean removing variable "original_xhci_hub_control" and save
> function pointer to the tegra_xusb structure ?
> 
> But that doesn't look possible over here to point to tegra_xusb
> structure and save pointer (to tegra_xhci_hc_driver.hub_control) into
> it.


Ah yes, this is in the init function and so we can't do that. Any issue 
with calling xhci_hub_control() directly in the function 
tegra_xhci_hub_control()?

Jon
Jim Lin Oct. 18, 2022, 3:20 a.m. UTC | #7
On Mon, 2022-10-17 at 21:17 +0100, Jon Hunter wrote:
> On 17/10/2022 10:36, Jim Lin wrote:
> > On Wed, 2022-10-12 at 12:45 +0100, Jon Hunter wrote:
> > > On 12/10/2022 11:25, Jim Lin wrote:
> > > > Program USB2 pad PD controls during port connect/disconnect,
> > > > port
> > > > suspend/resume, and test mode, to reduce power consumption on
> > > > disconnect or suspend.
> > > > 
> > > > Signed-off-by: Jim Lin <jilin@nvidia.com>
> > > > ---
> > > > v2: Fix issue that wrong tegra->phys[] may be accessed on
> > > > tegra124
> > > > v3: No change on copyright
> > > > 
> > > >    drivers/usb/host/xhci-tegra.c | 139
> > > > +++++++++++++++++++++++++++++++++-
> > > >    1 file changed, 138 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/usb/host/xhci-tegra.c
> > > > b/drivers/usb/host/xhci-
> > > > tegra.c
> > > > index c8af2cd2216d..996182a1959f 100644
> > > > --- a/drivers/usb/host/xhci-tegra.c
> > > > +++ b/drivers/usb/host/xhci-tegra.c
> > > > @@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
> > > >    	} fpci;
> > > >    };
> > > >    
> > > > +enum tegra_xhci_phy_type {
> > > > +	USB3_PHY,
> > > > +	USB2_PHY,
> > > > +	HSIC_PHY,
> > > > +	MAX_PHY_TYPES,
> > > > +};
> > > > +
> > > >    struct tegra_xusb_soc {
> > > >    	const char *firmware;
> > > >    	const char * const *supply_names;
> > > > @@ -274,9 +281,17 @@ struct tegra_xusb {
> > > >    
> > > >    	bool suspended;
> > > >    	struct tegra_xusb_context context;
> > > > +	u32 enable_utmi_pad_after_lp0_exit;
> > > >    };
> > > >    
> > > >    static struct hc_driver __read_mostly tegra_xhci_hc_driver;
> > > > +static int (*original_xhci_hub_control)(struct usb_hcd *hcd,
> > > > u16
> > > > typeReq, u16 wValue, u16 wIndex,
> > > > +	    char *buf, u16 wLength);
> > > 
> > > Is it better to add this function pointer to the tegra_xusb
> > > structure?
> > > 
> > > Jon
> > > 
> > 
> > Do you mean removing variable "original_xhci_hub_control" and save
> > function pointer to the tegra_xusb structure ?
> > 
> > But that doesn't look possible over here to point to tegra_xusb
> > structure and save pointer (to tegra_xhci_hc_driver.hub_control)
> > into
> > it.
> 
> 
> Ah yes, this is in the init function and so we can't do that. Any
> issue 
> with calling xhci_hub_control() directly in the function 
> tegra_xhci_hub_control()?
> 
> Jon
> 
Thanks, will try.

--nvpublic
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index c8af2cd2216d..996182a1959f 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -189,6 +189,13 @@  struct tegra_xusb_context_soc {
 	} fpci;
 };
 
+enum tegra_xhci_phy_type {
+	USB3_PHY,
+	USB2_PHY,
+	HSIC_PHY,
+	MAX_PHY_TYPES,
+};
+
 struct tegra_xusb_soc {
 	const char *firmware;
 	const char * const *supply_names;
@@ -274,9 +281,17 @@  struct tegra_xusb {
 
 	bool suspended;
 	struct tegra_xusb_context context;
+	u32 enable_utmi_pad_after_lp0_exit;
 };
 
 static struct hc_driver __read_mostly tegra_xhci_hc_driver;
+static int (*original_xhci_hub_control)(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
+	    char *buf, u16 wLength);
+
+static inline struct tegra_xusb *hcd_to_tegra_xusb(struct usb_hcd *hcd)
+{
+	return (struct tegra_xusb *) dev_get_drvdata(hcd->self.controller);
+}
 
 static inline u32 fpci_readl(struct tegra_xusb *tegra, unsigned int offset)
 {
@@ -1949,12 +1964,30 @@  static void tegra_xhci_enable_phy_sleepwalk_wake(struct tegra_xusb *tegra)
 static void tegra_xhci_disable_phy_wake(struct tegra_xusb *tegra)
 {
 	struct tegra_xusb_padctl *padctl = tegra->padctl;
-	unsigned int i;
+	unsigned int i, j;
 
 	for (i = 0; i < tegra->num_phys; i++) {
 		if (!tegra->phys[i])
 			continue;
+		if (tegra_xusb_padctl_remote_wake_detected(padctl, tegra->phys[i])) {
+			if (i < tegra->soc->phy_types[USB3_PHY].num) {
+				/* USB3 */
+				j = i;
+			} else if (i < (tegra->soc->phy_types[USB3_PHY].num +
+					tegra->soc->phy_types[USB2_PHY].num)) {
+				/* USB2 */
+				j = i - tegra->soc->phy_types[USB3_PHY].num;
+				tegra_phy_xusb_utmi_pad_power_on(tegra->phys[i]);
+			} else {
+				/* HSIC */
+				j = i - (tegra->soc->phy_types[USB3_PHY].num +
+					 tegra->soc->phy_types[USB2_PHY].num);
+			}
+			dev_dbg(tegra->dev,
+				"%s port %u (0 based) remote wake detected\n",
+				dev_name(&tegra->phys[i]->dev), j);
 
+		}
 		tegra_xusb_padctl_disable_phy_wake(padctl, tegra->phys[i]);
 	}
 }
@@ -1972,6 +2005,23 @@  static void tegra_xhci_disable_phy_sleepwalk(struct tegra_xusb *tegra)
 	}
 }
 
+static void tegra_xhci_program_utmi_power_lp0_exit(struct tegra_xusb *tegra)
+{
+	unsigned int i;
+
+	for (i = 0; i < tegra->soc->phy_types[USB2_PHY].num; i++) {
+		if (!is_host_mode_phy(tegra, USB2_PHY, i))
+			continue;
+		/* USB2 */
+		if (tegra->enable_utmi_pad_after_lp0_exit & BIT(i))
+			tegra_phy_xusb_utmi_pad_power_on(
+				tegra->phys[tegra->soc->phy_types[USB3_PHY].num + i]);
+		else
+			tegra_phy_xusb_utmi_pad_power_down(
+				tegra->phys[tegra->soc->phy_types[USB3_PHY].num + i]);
+	}
+}
+
 static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
@@ -1980,6 +2030,7 @@  static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
 	unsigned int i;
 	int err;
 	u32 usbcmd;
+	u32 portsc;
 
 	dev_dbg(dev, "entering ELPG\n");
 
@@ -1993,6 +2044,15 @@  static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
 		goto out;
 	}
 
+	for (i = 0; i < tegra->soc->phy_types[USB2_PHY].num; i++) {
+		if (!xhci->usb2_rhub.ports[i])
+			continue;
+		portsc = readl(xhci->usb2_rhub.ports[i]->addr);
+		tegra->enable_utmi_pad_after_lp0_exit &= ~BIT(i);
+		if (((portsc & PORT_PLS_MASK) == XDEV_U3) || ((portsc & DEV_SPEED_MASK) == XDEV_FS))
+			tegra->enable_utmi_pad_after_lp0_exit |= BIT(i);
+	}
+
 	err = xhci_suspend(xhci, wakeup);
 	if (err < 0) {
 		dev_err(tegra->dev, "failed to suspend XHCI: %d\n", err);
@@ -2066,6 +2126,8 @@  static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool runtime)
 
 		phy_power_on(tegra->phys[i]);
 	}
+	if (tegra->suspended)
+		tegra_xhci_program_utmi_power_lp0_exit(tegra);
 
 	tegra_xusb_config(tegra);
 	tegra_xusb_restore_context(tegra);
@@ -2437,6 +2499,79 @@  static int tegra_xhci_setup(struct usb_hcd *hcd)
 	return xhci_gen_setup(hcd, tegra_xhci_quirks);
 }
 
+static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index,
+				  char *buf, u16 length)
+{
+	struct tegra_xusb *tegra = hcd_to_tegra_xusb(hcd);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_hub *rhub;
+	struct xhci_bus_state *bus_state;
+	int port = (index & 0xff) - 1;
+	int i;
+	struct xhci_port **ports;
+	u32 portsc;
+	int ret;
+
+	rhub = &xhci->usb2_rhub;
+	bus_state = &rhub->bus_state;
+	if (bus_state->resuming_ports && hcd->speed == HCD_USB2) {
+		ports = rhub->ports;
+		i = rhub->num_ports;
+		while (i--) {
+			if (!test_bit(i, &bus_state->resuming_ports))
+				continue;
+			portsc = readl(ports[i]->addr);
+			if ((portsc & PORT_PLS_MASK) == XDEV_RESUME)
+				tegra_phy_xusb_utmi_pad_power_on(
+					tegra->phys[tegra->soc->phy_types[USB3_PHY].num + i]);
+		}
+	}
+
+	if (hcd->speed == HCD_USB2) {
+		i = tegra->soc->phy_types[USB3_PHY].num + port;
+		if ((type_req == ClearPortFeature) && (value == USB_PORT_FEAT_SUSPEND)) {
+			if (!index || index > rhub->num_ports)
+				return -EPIPE;
+			tegra_phy_xusb_utmi_pad_power_on(tegra->phys[i]);
+		}
+		if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_RESET)) {
+			if (!index || index > rhub->num_ports)
+				return -EPIPE;
+			ports = rhub->ports;
+			portsc = readl(ports[port]->addr);
+			if (portsc & PORT_CONNECT)
+				tegra_phy_xusb_utmi_pad_power_on(tegra->phys[i]);
+		}
+	}
+
+	ret = (*original_xhci_hub_control)(hcd, type_req, value, index, buf, length);
+	if (ret < 0)
+		return ret;
+
+	if (hcd->speed == HCD_USB2) {
+		if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_SUSPEND))
+			/* We don't suspend the PAD while HNP role swap happens on the OTG port */
+			if (!((hcd->self.otg_port == (port + 1)) && hcd->self.b_hnp_enable))
+				tegra_phy_xusb_utmi_pad_power_down(tegra->phys[i]);
+
+		if ((type_req == ClearPortFeature) && (value == USB_PORT_FEAT_C_CONNECTION)) {
+			ports = rhub->ports;
+			portsc = readl(ports[port]->addr);
+			if (!(portsc & PORT_CONNECT)) {
+				/* We don't suspend the PAD while HNP role swap happens on the OTG
+				 * port
+				 */
+				if (!((hcd->self.otg_port == (port + 1)) && hcd->self.b_hnp_enable))
+					tegra_phy_xusb_utmi_pad_power_down(tegra->phys[i]);
+			}
+		}
+		if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_TEST))
+			tegra_phy_xusb_utmi_pad_power_on(tegra->phys[i]);
+	}
+
+	return ret;
+}
+
 static const struct xhci_driver_overrides tegra_xhci_overrides __initconst = {
 	.reset = tegra_xhci_setup,
 };
@@ -2444,6 +2579,8 @@  static const struct xhci_driver_overrides tegra_xhci_overrides __initconst = {
 static int __init tegra_xusb_init(void)
 {
 	xhci_init_driver(&tegra_xhci_hc_driver, &tegra_xhci_overrides);
+	original_xhci_hub_control = tegra_xhci_hc_driver.hub_control;
+	tegra_xhci_hc_driver.hub_control = tegra_xhci_hub_control;
 
 	return platform_driver_register(&tegra_xusb_driver);
 }