diff mbox series

[v5,20/34] dt-bindings: pinctrl: qcom,msm8909-tlmm: fix indentation in example

Message ID 20221016170035.35014-21-krzysztof.kozlowski@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings (third set) | expand

Commit Message

Krzysztof Kozlowski Oct. 16, 2022, 5 p.m. UTC 
Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pinctrl/qcom,msm8909-tlmm.yaml   | 60 +++++++++----------
 1 file changed, 30 insertions(+), 30 deletions(-)

Comments

Krzysztof Kozlowski Oct. 17, 2022, 8:08 p.m. UTC | #1 
On Sun, 16 Oct 2022 13:00:21 -0400, Krzysztof Kozlowski wrote:
> Bindings example should be indented with 4-spaces.
> 
> 

Applied, thanks!

[20/34] dt-bindings: pinctrl: qcom,msm8909-tlmm: fix indentation in example
        https://git.kernel.org/krzk/linux-dt/c/6471d94807c33b9c2f0d806ee0d78b984626a819

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
index 08e2dd5cbebe..9c647e24fa9a 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -118,35 +118,35 @@  $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-        pinctrl@1000000 {
-                compatible = "qcom,msm8909-tlmm";
-                reg = <0x1000000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 117>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx-pins {
-                                pins = "gpio4";
-                                function = "blsp_uart1";
-                                bias-pull-up;
-                        };
-
-                        tx-pins {
-                                pins = "gpio5";
-                                function = "blsp_uart1";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@1000000 {
+        compatible = "qcom,msm8909-tlmm";
+        reg = <0x1000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 117>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
 ...