@@ -5299,6 +5299,10 @@ struct wiphy_iftype_akm_suites {
* NL80211_MAX_NR_AKM_SUITES in order to avoid compatibility issues with
* legacy userspace and maximum allowed value is
* CFG80211_MAX_NUM_AKM_SUITES.
+ *
+ * @ru_punct_supp_bw: Whether the driver supports RU puncturing, and if so,
+ * for which bandwidths. See &enum nl80211_ru_punct_supp_bw for the
+ * possible values for this field.
*/
struct wiphy {
struct mutex mtx;
@@ -5447,6 +5451,8 @@ struct wiphy {
u8 ema_max_profile_periodicity;
u16 max_num_akm_suites;
+ enum nl80211_ru_punct_supp_bw ru_punct_supp_bw;
+
char priv[] __aligned(NETDEV_ALIGN);
};
@@ -2751,7 +2751,13 @@ enum nl80211_commands {
* the incoming frame RX timestamp.
* @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent
* (re)associations.
+ *
+ * @NL80211_ATTR_RU_PUNCT_SUPP_BW: (u8) Minimum bandwidth for which
+ * the driver supports preamble puncturing, value should be of type
+ * &enum nl80211_ru_punct_supp_bw
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -3280,6 +3286,8 @@ enum nl80211_attrs {
NL80211_ATTR_RX_HW_TIMESTAMP,
NL80211_ATTR_TD_BITMAP,
+ NL80211_ATTR_RU_PUNCT_SUPP_BW,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -7723,4 +7731,21 @@ enum nl80211_ap_settings_flags {
NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,
};
+/**
+ * enum nl80211_ru_punct_supp_bw - Bandwidths supporting preamble puncturing
+ *
+ * @NL80211_RU_PUNCT_NOT_SUPP: preamble puncturing is not supported
+ * @NL80211_RU_PUNCT_SUPP_BW_80: puncturing supported within channels of at
+ * least 80 MHz bandwidth
+ * @NL80211_RU_PUNCT_SUPP_BW_160: puncturing supported within channels of at
+ * least 160 MHz bandwidth
+ * @NL80211_RU_PUNCT_SUPP_BW_320: puncturing supported within 320 MHz.
+ */
+enum nl80211_ru_punct_supp_bw {
+ NL80211_RU_PUNCT_NOT_SUPP,
+ NL80211_RU_PUNCT_SUPP_BW_80,
+ NL80211_RU_PUNCT_SUPP_BW_160,
+ NL80211_RU_PUNCT_SUPP_BW_320,
+};
+
#endif /* __LINUX_NL80211_H */
@@ -908,6 +908,10 @@ int wiphy_register(struct wiphy *wiphy)
return -EINVAL;
}
+ if (WARN_ON(rdev->wiphy.ru_punct_supp_bw >
+ NL80211_RU_PUNCT_SUPP_BW_320))
+ return -EINVAL;
+
for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) {
/*
* Validate we have a policy (can be explicitly set to
@@ -805,6 +805,8 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_MLD_ADDR] = NLA_POLICY_EXACT_LEN(ETH_ALEN),
[NL80211_ATTR_MLO_SUPPORT] = { .type = NLA_FLAG },
[NL80211_ATTR_MAX_NUM_AKM_SUITES] = { .type = NLA_REJECT },
+ [NL80211_ATTR_RU_PUNCT_SUPP_BW] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_RU_PUNCT_SUPP_BW_320),
};
/* policy for the key attributes */
@@ -2355,6 +2357,20 @@ static int nl80211_put_mbssid_support(struct wiphy *wiphy, struct sk_buff *msg)
return -ENOBUFS;
}
+static int
+nl80211_put_ru_punct_supp_bw(struct cfg80211_registered_device *rdev,
+ struct sk_buff *msg)
+{
+ if (rdev->wiphy.ru_punct_supp_bw == NL80211_RU_PUNCT_NOT_SUPP)
+ return 0;
+
+ if (nla_put_u8(msg, NL80211_ATTR_RU_PUNCT_SUPP_BW,
+ rdev->wiphy.ru_punct_supp_bw))
+ return -ENOBUFS;
+
+ return 0;
+}
+
struct nl80211_dump_wiphy_state {
s64 filter_wiphy;
long start;
@@ -2959,6 +2975,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
if (rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_MLO)
nla_put_flag(msg, NL80211_ATTR_MLO_SUPPORT);
+ if (nl80211_put_ru_punct_supp_bw(rdev, msg))
+ goto nla_put_failure;
+
/* done */
state->split_start = 0;
break;