Message ID | 20221230035928.3423990-2-reijiw@google.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | KVM: arm64: PMU: Allow userspace to limit the number of PMCs on vCPU | expand |
On Thu, Dec 29, 2022 at 07:59:22PM -0800, Reiji Watanabe wrote: > On vCPU reset, PMCNTEN{SET,CLR}_EL1 and PMOVS{SET,CLR}_EL1 for > a vCPU are reset by reset_pmu_reg(). This function clears RAZ bits > of those registers corresponding to unimplemented event counters > on the vCPU, and sets bits corresponding to implemented event counters > to a predefined pseudo UNKNOWN value (some bits are set to 1). > > The function identifies (un)implemented event counters on the > vCPU based on the PMCR_EL1.N value on the host. Using the host > value for this would be problematic when KVM supports letting > userspace set PMCR_EL1.N to a value different from the host value > (some of the RAZ bits of those registers could end up being set to 1). > > Fix reset_pmu_reg() to clear the registers so that it can ensure > that all the RAZ bits are cleared even when the PMCR_EL1.N value > for the vCPU is different from the host value. > > Signed-off-by: Reiji Watanabe <reijiw@google.com> > --- > arch/arm64/kvm/sys_regs.c | 10 +--------- > 1 file changed, 1 insertion(+), 9 deletions(-) > > diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c > index c6cbfe6b854b..ec4bdaf71a15 100644 > --- a/arch/arm64/kvm/sys_regs.c > +++ b/arch/arm64/kvm/sys_regs.c > @@ -604,19 +604,11 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu, > > static void reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) > { > - u64 n, mask = BIT(ARMV8_PMU_CYCLE_IDX); > - > /* No PMU available, any PMU reg may UNDEF... */ > if (!kvm_arm_support_pmu_v3()) > return; > > - n = read_sysreg(pmcr_el0) >> ARMV8_PMU_PMCR_N_SHIFT; > - n &= ARMV8_PMU_PMCR_N_MASK; > - if (n) > - mask |= GENMASK(n - 1, 0); > - > - reset_unknown(vcpu, r); > - __vcpu_sys_reg(vcpu, r->reg) &= mask; > + __vcpu_sys_reg(vcpu, r->reg) = 0; I've personally found KVM's UNKNOWN reset value to be tremendously useful in debugging guest behavior, as seeing that value is quite a 'smoking gun' IMO. Rather than zeroing the entire register, is it possible to instead derive the mask based on what userspace wrote to PMCR_EL1.N instead of what's in hardware? -- Thanks, Oliver
Hi Oliver, On Sun, Jan 8, 2023 at 11:07 AM Oliver Upton <oliver.upton@linux.dev> wrote: > > On Thu, Dec 29, 2022 at 07:59:22PM -0800, Reiji Watanabe wrote: > > On vCPU reset, PMCNTEN{SET,CLR}_EL1 and PMOVS{SET,CLR}_EL1 for > > a vCPU are reset by reset_pmu_reg(). This function clears RAZ bits > > of those registers corresponding to unimplemented event counters > > on the vCPU, and sets bits corresponding to implemented event counters > > to a predefined pseudo UNKNOWN value (some bits are set to 1). > > > > The function identifies (un)implemented event counters on the > > vCPU based on the PMCR_EL1.N value on the host. Using the host > > value for this would be problematic when KVM supports letting > > userspace set PMCR_EL1.N to a value different from the host value > > (some of the RAZ bits of those registers could end up being set to 1). > > > > Fix reset_pmu_reg() to clear the registers so that it can ensure > > that all the RAZ bits are cleared even when the PMCR_EL1.N value > > for the vCPU is different from the host value. > > > > Signed-off-by: Reiji Watanabe <reijiw@google.com> > > --- > > arch/arm64/kvm/sys_regs.c | 10 +--------- > > 1 file changed, 1 insertion(+), 9 deletions(-) > > > > diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c > > index c6cbfe6b854b..ec4bdaf71a15 100644 > > --- a/arch/arm64/kvm/sys_regs.c > > +++ b/arch/arm64/kvm/sys_regs.c > > @@ -604,19 +604,11 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu, > > > > static void reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) > > { > > - u64 n, mask = BIT(ARMV8_PMU_CYCLE_IDX); > > - > > /* No PMU available, any PMU reg may UNDEF... */ > > if (!kvm_arm_support_pmu_v3()) > > return; > > > > - n = read_sysreg(pmcr_el0) >> ARMV8_PMU_PMCR_N_SHIFT; > > - n &= ARMV8_PMU_PMCR_N_MASK; > > - if (n) > > - mask |= GENMASK(n - 1, 0); > > - > > - reset_unknown(vcpu, r); > > - __vcpu_sys_reg(vcpu, r->reg) &= mask; > > + __vcpu_sys_reg(vcpu, r->reg) = 0; > > I've personally found KVM's UNKNOWN reset value to be tremendously > useful in debugging guest behavior, as seeing that value is quite a > 'smoking gun' IMO. > > Rather than zeroing the entire register, is it possible to instead > derive the mask based on what userspace wrote to PMCR_EL1.N instead of > what's in hardware? Yeah, it's feasible. Then, I am considering having KVM to clear new RAZ bits of those registers based on the new PMCR_EL0.N value that userspace sets when userspace updates PMCR_EL0.N, as clearing the new RAZ bits should be done anyway by either KVM or userspace. What do you think ? Thank you, Reiji
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index c6cbfe6b854b..ec4bdaf71a15 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -604,19 +604,11 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu, static void reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { - u64 n, mask = BIT(ARMV8_PMU_CYCLE_IDX); - /* No PMU available, any PMU reg may UNDEF... */ if (!kvm_arm_support_pmu_v3()) return; - n = read_sysreg(pmcr_el0) >> ARMV8_PMU_PMCR_N_SHIFT; - n &= ARMV8_PMU_PMCR_N_MASK; - if (n) - mask |= GENMASK(n - 1, 0); - - reset_unknown(vcpu, r); - __vcpu_sys_reg(vcpu, r->reg) &= mask; + __vcpu_sys_reg(vcpu, r->reg) = 0; } static void reset_pmevcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
On vCPU reset, PMCNTEN{SET,CLR}_EL1 and PMOVS{SET,CLR}_EL1 for a vCPU are reset by reset_pmu_reg(). This function clears RAZ bits of those registers corresponding to unimplemented event counters on the vCPU, and sets bits corresponding to implemented event counters to a predefined pseudo UNKNOWN value (some bits are set to 1). The function identifies (un)implemented event counters on the vCPU based on the PMCR_EL1.N value on the host. Using the host value for this would be problematic when KVM supports letting userspace set PMCR_EL1.N to a value different from the host value (some of the RAZ bits of those registers could end up being set to 1). Fix reset_pmu_reg() to clear the registers so that it can ensure that all the RAZ bits are cleared even when the PMCR_EL1.N value for the vCPU is different from the host value. Signed-off-by: Reiji Watanabe <reijiw@google.com> --- arch/arm64/kvm/sys_regs.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)