| Message ID | 20230127211527.260060-3-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFT,v2,1/4] ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250 | expand |
On 27/01/2023 22:15, Krzysztof Kozlowski wrote: > Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node > which do not have unit address. Therefore usethe address space > of child device (actual DWC3 Controller) as the wrapper's address to > fix: > > exynos5433-tm2e.dtb: soc@0: usbdrd: {'compatible': ['samsung,exynos5433-dwusb3'], ... > should not be valid under {'type': 'object'} > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Changes since v1: > 1. New patch > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 9da24fe958a3..0fca783979f6 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -1742,7 +1742,7 @@ hsi2c_11: i2c@14df0000 { > status = "disabled"; > }; > > - usbdrd30: usbdrd { > + usbdrd30: usb@15400000 { > compatible = "samsung,exynos5433-dwusb3"; > clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, > <&cmu_fsys CLK_SCLK_USBDRD30>, > @@ -1751,16 +1751,16 @@ usbdrd30: usbdrd { > clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; > #address-cells = <1>; > #size-cells = <1>; > - ranges; > + ranges = <0x0 0x15400000 0x10000>; > status = "disabled"; > > - usbdrd_dwc3: usb@15400000 { > + usbdrd_dwc3: usb@0 { > compatible = "snps,dwc3"; > clocks = <&cmu_fsys CLK_SCLK_USBDRD30>, > <&cmu_fsys CLK_ACLK_USBDRD30>, > <&cmu_fsys CLK_SCLK_USBDRD30>; > clock-names = "ref", "bus_early", "suspend"; > - reg = <0x15400000 0x10000>; > + reg = <0x0 0x10000>; > interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; > phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; > phy-names = "usb2-phy", "usb3-phy"; > @@ -1795,7 +1795,7 @@ usbhost30_phy: phy@15580000 { > status = "disabled"; > }; > > - usbhost30: usbhost { > + usbhost30: usb@15a00000 { > compatible = "samsung,exynos5433-dwusb3"; > clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, > <&cmu_fsys CLK_SCLK_USBHOST30>, > @@ -1804,16 +1804,16 @@ usbhost30: usbhost { > clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; > #address-cells = <1>; > #size-cells = <1>; > - ranges; > + ranges <0x0 0x15a00000 0x10000>; This does not even build... Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 9da24fe958a3..0fca783979f6 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1742,7 +1742,7 @@ hsi2c_11: i2c@14df0000 { status = "disabled"; }; - usbdrd30: usbdrd { + usbdrd30: usb@15400000 { compatible = "samsung,exynos5433-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&cmu_fsys CLK_SCLK_USBDRD30>, @@ -1751,16 +1751,16 @@ usbdrd30: usbdrd { clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x15400000 0x10000>; status = "disabled"; - usbdrd_dwc3: usb@15400000 { + usbdrd_dwc3: usb@0 { compatible = "snps,dwc3"; clocks = <&cmu_fsys CLK_SCLK_USBDRD30>, <&cmu_fsys CLK_ACLK_USBDRD30>, <&cmu_fsys CLK_SCLK_USBDRD30>; clock-names = "ref", "bus_early", "suspend"; - reg = <0x15400000 0x10000>; + reg = <0x0 0x10000>; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; phy-names = "usb2-phy", "usb3-phy"; @@ -1795,7 +1795,7 @@ usbhost30_phy: phy@15580000 { status = "disabled"; }; - usbhost30: usbhost { + usbhost30: usb@15a00000 { compatible = "samsung,exynos5433-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&cmu_fsys CLK_SCLK_USBHOST30>, @@ -1804,16 +1804,16 @@ usbhost30: usbhost { clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges <0x0 0x15a00000 0x10000>; status = "disabled"; - usbhost_dwc3: usb@15a00000 { + usbhost_dwc3: usb@0 { compatible = "snps,dwc3"; clocks = <&cmu_fsys CLK_SCLK_USBHOST30>, <&cmu_fsys CLK_ACLK_USBHOST30>, <&cmu_fsys CLK_SCLK_USBHOST30>; clock-names = "ref", "bus_early", "suspend"; - reg = <0x15a00000 0x10000>; + reg = <0x0 0x10000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; phy-names = "usb2-phy", "usb3-phy";
Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node which do not have unit address. Therefore usethe address space of child device (actual DWC3 Controller) as the wrapper's address to fix: exynos5433-tm2e.dtb: soc@0: usbdrd: {'compatible': ['samsung,exynos5433-dwusb3'], ... should not be valid under {'type': 'object'} Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes since v1: 1. New patch --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)