| Message ID | 20230207103607.12213-2-quic_youghand@quicinc.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | dt: bindings: net: ath11k: add dt entry for XO calibration support | expand |
On 07/02/2023 11:36, Youghandhar Chintala wrote: > Add dt binding to get XO calibration data support for Wi-Fi RF clock. > > Retrieve the XO trim offset via system firmware (e.g., device tree), > especially in the case where the device doesn't have a useful EEPROM > on which to store the calibrated XO offset. > Calibrated XO offset is sent to firmware, which compensate the RF clock > drift by programing the XO trim register. > And this is second v3 and still not fixed. The same as previous v3 and previous v2 (???). Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index f7cf135aa37f..4745251e70d4 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -41,6 +41,10 @@ properties: * reg * reg-names + xo-cal-data: + description: + XO frequency offset to program the XO trim register + qcom,ath11k-calibration-variant: $ref: /schemas/types.yaml#/definitions/string description:
Add dt binding to get XO calibration data support for Wi-Fi RF clock. Retrieve the XO trim offset via system firmware (e.g., device tree), especially in the case where the device doesn't have a useful EEPROM on which to store the calibrated XO offset. Calibrated XO offset is sent to firmware, which compensate the RF clock drift by programing the XO trim register. Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com> --- .../devicetree/bindings/net/wireless/qcom,ath11k.yaml | 4 ++++ 1 file changed, 4 insertions(+)