diff mbox series

[v4,1/4] dt-bindings: i2c: Add CP2112 HID USB to SMBus Bridge

Message ID 20230206135016.6737-2-kaehndan@gmail.com (mailing list archive)
State New, archived
Headers show
Series DeviceTree Support for USB-HID Devices and CP2112 | expand

Commit Message

Daniel Kaehn Feb. 6, 2023, 1:50 p.m. UTC
This is a USB HID device which includes an I2C controller and 8 GPIO pins.

The binding allows describing the chip's gpio and i2c controller in DT
using the subnodes named "gpio" and "i2c", respectively. This is
intended to be used in configurations where the CP2112 is permanently
connected in hardware.

Signed-off-by: Danny Kaehn <kaehndan@gmail.com>
---
 .../bindings/i2c/silabs,cp2112.yaml           | 112 ++++++++++++++++++
 1 file changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml

Comments

Krzysztof Kozlowski Feb. 6, 2023, 4:17 p.m. UTC | #1
On 06/02/2023 14:50, Danny Kaehn wrote:
> This is a USB HID device which includes an I2C controller and 8 GPIO pins.
> 
> The binding allows describing the chip's gpio and i2c controller in DT
> using the subnodes named "gpio" and "i2c", respectively. This is
> intended to be used in configurations where the CP2112 is permanently
> connected in hardware.
> 
> Signed-off-by: Danny Kaehn <kaehndan@gmail.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Rob Herring (Arm) Feb. 7, 2023, 6:50 p.m. UTC | #2
On Mon, Feb 06, 2023 at 07:50:13AM -0600, Danny Kaehn wrote:
> This is a USB HID device which includes an I2C controller and 8 GPIO pins.
> 
> The binding allows describing the chip's gpio and i2c controller in DT
> using the subnodes named "gpio" and "i2c", respectively. This is
> intended to be used in configurations where the CP2112 is permanently
> connected in hardware.

My comments on v3 still apply. Please slow down your pace of sending new 
versions so folks have change to review.

Rob
Daniel Kaehn Feb. 8, 2023, 1:16 p.m. UTC | #3
On Tue, Feb 7, 2023 at 12:50 PM Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Feb 06, 2023 at 07:50:13AM -0600, Danny Kaehn wrote:
> > This is a USB HID device which includes an I2C controller and 8 GPIO pins.
> >
> > The binding allows describing the chip's gpio and i2c controller in DT
> > using the subnodes named "gpio" and "i2c", respectively. This is
> > intended to be used in configurations where the CP2112 is permanently
> > connected in hardware.
>
> My comments on v3 still apply. Please slow down your pace of sending new
> versions so folks have change to review.
>
> Rob

Thanks for the correction -- I definitely see how that could be
frustrating / problematic. (until now I'd thought the ideal case was
that comments were addressed as soon as possible, so that folks
wouldn't be reviewing now-obsolete code that might change due to other
comments anyways)

Thanks,

Danny Kaehn
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
new file mode 100644
index 000000000000..286e4dbafd69
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
@@ -0,0 +1,112 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/silabs,cp2112.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CP2112 HID USB to SMBus/I2C Bridge
+
+maintainers:
+  - Danny Kaehn <kaehndan@gmail.com>
+
+description:
+  The CP2112 is a USB HID device which includes an integrated I2C controller
+  and 8 GPIO pins. Its GPIO pins can each be configured as inputs, open-drain
+  outputs, or push-pull outputs.
+
+properties:
+  compatible:
+    const: usb10c4,ea90
+
+  reg:
+    maxItems: 1
+    description: The USB port number on the host controller
+
+  i2c:
+    description: The SMBus/I2C controller node for the CP2112
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+    properties:
+      clock-frequency:
+        minimum: 10000
+        default: 100000
+        maximum: 400000
+
+  gpio:
+    description: The GPIO controller node for the CP2112
+    type: object
+    properties:
+      interrupt-controller: true
+      "#interrupt-cells":
+        const: 2
+
+      gpio-controller: true
+      "#gpio-cells":
+        const: 2
+
+      ngpios:
+        const: 8
+
+      gpio-line-names:
+        minItems: 1
+        maxItems: 8
+
+    patternProperties:
+      "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+        type: object
+        properties:
+          gpio-hog: true
+          input: true
+          output-high: true
+          output-low: true
+          line-name: true
+          gpios:
+            minItems: 1
+            maxItems: 8
+
+        required:
+          - gpio-hog
+          - gpios
+
+        additionalProperties: false
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      device@1 {
+        compatible = "usb10c4,ea90";
+        reg = <1>;
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          temp@48 {
+            compatible = "national,lm75";
+            reg = <0x48>;
+          };
+        };
+
+        gpio {
+          gpio-controller;
+          interrupt-controller;
+          #gpio-cells = <2>;
+          gpio-line-names = "TEST0", "TEST1", "TEST2",
+            "TEST3", "TEST4", "TEST5", "TEST6", "TEST7";
+        };
+      };
+    };