diff mbox series

[v3,3/5] arm64: dts: qcom: sm8350: add dp controller

Message ID 20230206-topic-sm8450-upstream-dp-controller-v3-3-636ef9e99932@linaro.org (mailing list archive)
State New, archived
Headers show
Series arm64: dts: qcom: add DP Controller to SM8350 & SM8450 DTS | expand

Commit Message

Neil Armstrong Feb. 10, 2023, 2:44 p.m. UTC
Add the Display Port controller subnode to the MDSS node.

Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 79 ++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

Comments

Dmitry Baryshkov Feb. 10, 2023, 3:18 p.m. UTC | #1
On 10/02/2023 16:44, Neil Armstrong wrote:
> Add the Display Port controller subnode to the MDSS node.
> 
> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 79 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 79 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 6638704ff469..f48523790883 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2405,6 +2405,85 @@  dpu_intf2_out: endpoint {
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+			                      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+			        phy-names = "dp";
+
+			        #sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8350_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
 				};
 			};