| Message ID | 20230218183842.never.954-kees@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | net/mlx4_en: Introduce flexible array to silence overflow warning | expand |
On 18/02/2023 20:38, Kees Cook wrote: > The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY > memcpy() warning on ppc64 platform: > > In function ‘fortify_memcpy_chk’, > inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2, > inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4, > inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3: > ./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with > attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? > [-Werror=attribute-warning] > 513 | __write_overflow_field(p_size_field, size); > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Same behaviour on x86 you can get if you use "__always_inline" instead of > "inline" for skb_copy_from_linear_data() in skbuff.h > > The call here copies data into inlined tx destricptor, which has 104 > bytes (MAX_INLINE) space for data payload. In this case "spc" is known > in compile-time but the destination is used with hidden knowledge > (real structure of destination is different from that the compiler > can see). That cause the fortify warning because compiler can check > bounds, but the real bounds are different. "spc" can't be bigger than > 64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined > tx descriptor. The fact that "inl" points into inlined tx descriptor is > determined earlier in mlx4_en_xmit(). > > Avoid confusing the compiler with "inl + 1" constructions to get to past > the inl header by introducing a flexible array "data" to the struct so > that the compiler can see that we are not dealing with an array of inl > structs, but rather, arbitrary data following the structure. There are > no changes to the structure layout reported by pahole, and the resulting > machine code is actually smaller. > > Reported-by: Josef Oskera <joskera@redhat.com> > Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com > Fixes: f68f2ff91512 ("fortify: Detect struct member overflows in memcpy() at compile-time") > Cc: Tariq Toukan <tariqt@nvidia.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Yishai Hadas <yishaih@nvidia.com> > Cc: netdev@vger.kernel.org > Cc: linux-rdma@vger.kernel.org > Signed-off-by: Kees Cook <keescook@chromium.org> > --- > drivers/net/ethernet/mellanox/mlx4/en_tx.c | 22 +++++++++++----------- > include/linux/mlx4/qp.h | 1 + > 2 files changed, 12 insertions(+), 11 deletions(-) > Just saw your patch now, after commenting on the other thread. :) So you choose not to fix similar usages in RDMA driver drivers/infiniband/hw/mlx4/qp.c, like: 3204 spc = MLX4_INLINE_ALIGN - 3205 ((unsigned long) (inl + 1) & (MLX4_INLINE_ALIGN - 1)); 3206 if (header_size <= spc) { 3207 inl->byte_count = cpu_to_be32(1 << 31 | header_size); 3208 memcpy(inl + 1, sqp->header_buf, header_size); 3209 i = 1; 3210 } else { 3211 inl->byte_count = cpu_to_be32(1 << 31 | spc); 3212 memcpy(inl + 1, sqp->header_buf, spc); 3213 3214 inl = (void *) (inl + 1) + spc; 3215 memcpy(inl + 1, sqp->header_buf + spc, header_size - spc); This keeps the patch minimal indeed. Did you repro the issue and test this solution? Maybe Josef can also verify it works for him? > diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c > index c5758637b7be..2f79378fbf6e 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c > +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c > @@ -699,32 +699,32 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, > inl->byte_count = cpu_to_be32(1 << 31 | skb->len); > } else { > inl->byte_count = cpu_to_be32(1 << 31 | MIN_PKT_LEN); > - memset(((void *)(inl + 1)) + skb->len, 0, > + memset(inl->data + skb->len, 0, > MIN_PKT_LEN - skb->len); > } > - skb_copy_from_linear_data(skb, inl + 1, hlen); > + skb_copy_from_linear_data(skb, inl->data, hlen); > if (shinfo->nr_frags) > - memcpy(((void *)(inl + 1)) + hlen, fragptr, > + memcpy(inl->data + hlen, fragptr, > skb_frag_size(&shinfo->frags[0])); > > } else { > inl->byte_count = cpu_to_be32(1 << 31 | spc); > if (hlen <= spc) { > - skb_copy_from_linear_data(skb, inl + 1, hlen); > + skb_copy_from_linear_data(skb, inl->data, hlen); > if (hlen < spc) { > - memcpy(((void *)(inl + 1)) + hlen, > + memcpy(inl->data + hlen, > fragptr, spc - hlen); > fragptr += spc - hlen; > } > - inl = (void *) (inl + 1) + spc; > - memcpy(((void *)(inl + 1)), fragptr, skb->len - spc); > + inl = (void *)inl->data + spc; > + memcpy(inl->data, fragptr, skb->len - spc); > } else { > - skb_copy_from_linear_data(skb, inl + 1, spc); > - inl = (void *) (inl + 1) + spc; > - skb_copy_from_linear_data_offset(skb, spc, inl + 1, > + skb_copy_from_linear_data(skb, inl->data, spc); > + inl = (void *)inl->data + spc; No need now for all these (void *) castings. > + skb_copy_from_linear_data_offset(skb, spc, inl->data, > hlen - spc); > if (shinfo->nr_frags) > - memcpy(((void *)(inl + 1)) + hlen - spc, > + memcpy(inl->data + hlen - spc, > fragptr, > skb_frag_size(&shinfo->frags[0])); > } > diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h > index c78b90f2e9a1..b9a7b1319f5d 100644 > --- a/include/linux/mlx4/qp.h > +++ b/include/linux/mlx4/qp.h > @@ -446,6 +446,7 @@ enum { > > struct mlx4_wqe_inline_seg { > __be32 byte_count; > + __u8 data[]; > }; > > enum mlx4_update_qp_attr {
I've tried Kees's patch and it works for me. I am able to compile mlx4 without the fortify warning. ne 19. 2. 2023 v 10:43 odesílatel Tariq Toukan <ttoukan.linux@gmail.com> napsal: > > > > On 18/02/2023 20:38, Kees Cook wrote: > > The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY > > memcpy() warning on ppc64 platform: > > > > In function ‘fortify_memcpy_chk’, > > inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2, > > inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4, > > inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3: > > ./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with > > attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? > > [-Werror=attribute-warning] > > 513 | __write_overflow_field(p_size_field, size); > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > Same behaviour on x86 you can get if you use "__always_inline" instead of > > "inline" for skb_copy_from_linear_data() in skbuff.h > > > > The call here copies data into inlined tx destricptor, which has 104 > > bytes (MAX_INLINE) space for data payload. In this case "spc" is known > > in compile-time but the destination is used with hidden knowledge > > (real structure of destination is different from that the compiler > > can see). That cause the fortify warning because compiler can check > > bounds, but the real bounds are different. "spc" can't be bigger than > > 64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined > > tx descriptor. The fact that "inl" points into inlined tx descriptor is > > determined earlier in mlx4_en_xmit(). > > > > Avoid confusing the compiler with "inl + 1" constructions to get to past > > the inl header by introducing a flexible array "data" to the struct so > > that the compiler can see that we are not dealing with an array of inl > > structs, but rather, arbitrary data following the structure. There are > > no changes to the structure layout reported by pahole, and the resulting > > machine code is actually smaller. > > > > Reported-by: Josef Oskera <joskera@redhat.com> > > Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com > > Fixes: f68f2ff91512 ("fortify: Detect struct member overflows in memcpy() at compile-time") > > Cc: Tariq Toukan <tariqt@nvidia.com> > > Cc: "David S. Miller" <davem@davemloft.net> > > Cc: Eric Dumazet <edumazet@google.com> > > Cc: Jakub Kicinski <kuba@kernel.org> > > Cc: Paolo Abeni <pabeni@redhat.com> > > Cc: Yishai Hadas <yishaih@nvidia.com> > > Cc: netdev@vger.kernel.org > > Cc: linux-rdma@vger.kernel.org > > Signed-off-by: Kees Cook <keescook@chromium.org> > > --- > > drivers/net/ethernet/mellanox/mlx4/en_tx.c | 22 +++++++++++----------- > > include/linux/mlx4/qp.h | 1 + > > 2 files changed, 12 insertions(+), 11 deletions(-) > > > > Just saw your patch now, after commenting on the other thread. :) > > So you choose not to fix similar usages in RDMA driver > drivers/infiniband/hw/mlx4/qp.c, like: > > 3204 spc = MLX4_INLINE_ALIGN - > 3205 ((unsigned long) (inl + 1) & (MLX4_INLINE_ALIGN - 1)); > 3206 if (header_size <= spc) { > 3207 inl->byte_count = cpu_to_be32(1 << 31 | header_size); > 3208 memcpy(inl + 1, sqp->header_buf, header_size); > 3209 i = 1; > 3210 } else { > 3211 inl->byte_count = cpu_to_be32(1 << 31 | spc); > 3212 memcpy(inl + 1, sqp->header_buf, spc); > 3213 > 3214 inl = (void *) (inl + 1) + spc; > 3215 memcpy(inl + 1, sqp->header_buf + spc, header_size > - spc); > > This keeps the patch minimal indeed. > > Did you repro the issue and test this solution? > Maybe Josef can also verify it works for him? > > > diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c > > index c5758637b7be..2f79378fbf6e 100644 > > --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c > > +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c > > @@ -699,32 +699,32 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, > > inl->byte_count = cpu_to_be32(1 << 31 | skb->len); > > } else { > > inl->byte_count = cpu_to_be32(1 << 31 | MIN_PKT_LEN); > > - memset(((void *)(inl + 1)) + skb->len, 0, > > + memset(inl->data + skb->len, 0, > > MIN_PKT_LEN - skb->len); > > } > > - skb_copy_from_linear_data(skb, inl + 1, hlen); > > + skb_copy_from_linear_data(skb, inl->data, hlen); > > if (shinfo->nr_frags) > > - memcpy(((void *)(inl + 1)) + hlen, fragptr, > > + memcpy(inl->data + hlen, fragptr, > > skb_frag_size(&shinfo->frags[0])); > > > > } else { > > inl->byte_count = cpu_to_be32(1 << 31 | spc); > > if (hlen <= spc) { > > - skb_copy_from_linear_data(skb, inl + 1, hlen); > > + skb_copy_from_linear_data(skb, inl->data, hlen); > > if (hlen < spc) { > > - memcpy(((void *)(inl + 1)) + hlen, > > + memcpy(inl->data + hlen, > > fragptr, spc - hlen); > > fragptr += spc - hlen; > > } > > - inl = (void *) (inl + 1) + spc; > > - memcpy(((void *)(inl + 1)), fragptr, skb->len - spc); > > + inl = (void *)inl->data + spc; > > + memcpy(inl->data, fragptr, skb->len - spc); > > } else { > > - skb_copy_from_linear_data(skb, inl + 1, spc); > > - inl = (void *) (inl + 1) + spc; > > - skb_copy_from_linear_data_offset(skb, spc, inl + 1, > > + skb_copy_from_linear_data(skb, inl->data, spc); > > + inl = (void *)inl->data + spc; > > No need now for all these (void *) castings. > > > + skb_copy_from_linear_data_offset(skb, spc, inl->data, > > hlen - spc); > > if (shinfo->nr_frags) > > - memcpy(((void *)(inl + 1)) + hlen - spc, > > + memcpy(inl->data + hlen - spc, > > fragptr, > > skb_frag_size(&shinfo->frags[0])); > > } > > diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h > > index c78b90f2e9a1..b9a7b1319f5d 100644 > > --- a/include/linux/mlx4/qp.h > > +++ b/include/linux/mlx4/qp.h > > @@ -446,6 +446,7 @@ enum { > > > > struct mlx4_wqe_inline_seg { > > __be32 byte_count; > > + __u8 data[]; > > }; > > > > enum mlx4_update_qp_attr { >
On 20/02/2023 4:09, Josef Oskera wrote: > I've tried Kees's patch and it works for me. I am able to compile mlx4 > without the fortify warning. > > ne 19. 2. 2023 v 10:43 odesílatel Tariq Toukan <ttoukan.linux@gmail.com> napsal: Thanks Josef. Then let's go with this one. Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Hello: This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <kuba@kernel.org>: On Sat, 18 Feb 2023 10:38:50 -0800 you wrote: > The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY > memcpy() warning on ppc64 platform: > > In function ‘fortify_memcpy_chk’, > inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2, > inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4, > inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3: > ./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with > attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? > [-Werror=attribute-warning] > 513 | __write_overflow_field(p_size_field, size); > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > [...] Here is the summary with links: - net/mlx4_en: Introduce flexible array to silence overflow warning https://git.kernel.org/netdev/net-next/c/f8f185e39b4d You are awesome, thank you!
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index c5758637b7be..2f79378fbf6e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -699,32 +699,32 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, inl->byte_count = cpu_to_be32(1 << 31 | skb->len); } else { inl->byte_count = cpu_to_be32(1 << 31 | MIN_PKT_LEN); - memset(((void *)(inl + 1)) + skb->len, 0, + memset(inl->data + skb->len, 0, MIN_PKT_LEN - skb->len); } - skb_copy_from_linear_data(skb, inl + 1, hlen); + skb_copy_from_linear_data(skb, inl->data, hlen); if (shinfo->nr_frags) - memcpy(((void *)(inl + 1)) + hlen, fragptr, + memcpy(inl->data + hlen, fragptr, skb_frag_size(&shinfo->frags[0])); } else { inl->byte_count = cpu_to_be32(1 << 31 | spc); if (hlen <= spc) { - skb_copy_from_linear_data(skb, inl + 1, hlen); + skb_copy_from_linear_data(skb, inl->data, hlen); if (hlen < spc) { - memcpy(((void *)(inl + 1)) + hlen, + memcpy(inl->data + hlen, fragptr, spc - hlen); fragptr += spc - hlen; } - inl = (void *) (inl + 1) + spc; - memcpy(((void *)(inl + 1)), fragptr, skb->len - spc); + inl = (void *)inl->data + spc; + memcpy(inl->data, fragptr, skb->len - spc); } else { - skb_copy_from_linear_data(skb, inl + 1, spc); - inl = (void *) (inl + 1) + spc; - skb_copy_from_linear_data_offset(skb, spc, inl + 1, + skb_copy_from_linear_data(skb, inl->data, spc); + inl = (void *)inl->data + spc; + skb_copy_from_linear_data_offset(skb, spc, inl->data, hlen - spc); if (shinfo->nr_frags) - memcpy(((void *)(inl + 1)) + hlen - spc, + memcpy(inl->data + hlen - spc, fragptr, skb_frag_size(&shinfo->frags[0])); } diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index c78b90f2e9a1..b9a7b1319f5d 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -446,6 +446,7 @@ enum { struct mlx4_wqe_inline_seg { __be32 byte_count; + __u8 data[]; }; enum mlx4_update_qp_attr {
The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY memcpy() warning on ppc64 platform: In function ‘fortify_memcpy_chk’, inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2, inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4, inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3: ./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 513 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Same behaviour on x86 you can get if you use "__always_inline" instead of "inline" for skb_copy_from_linear_data() in skbuff.h The call here copies data into inlined tx destricptor, which has 104 bytes (MAX_INLINE) space for data payload. In this case "spc" is known in compile-time but the destination is used with hidden knowledge (real structure of destination is different from that the compiler can see). That cause the fortify warning because compiler can check bounds, but the real bounds are different. "spc" can't be bigger than 64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined tx descriptor. The fact that "inl" points into inlined tx descriptor is determined earlier in mlx4_en_xmit(). Avoid confusing the compiler with "inl + 1" constructions to get to past the inl header by introducing a flexible array "data" to the struct so that the compiler can see that we are not dealing with an array of inl structs, but rather, arbitrary data following the structure. There are no changes to the structure layout reported by pahole, and the resulting machine code is actually smaller. Reported-by: Josef Oskera <joskera@redhat.com> Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com Fixes: f68f2ff91512 ("fortify: Detect struct member overflows in memcpy() at compile-time") Cc: Tariq Toukan <tariqt@nvidia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Yishai Hadas <yishaih@nvidia.com> Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 22 +++++++++++----------- include/linux/mlx4/qp.h | 1 + 2 files changed, 12 insertions(+), 11 deletions(-)