diff mbox series

[v2] wifi: mt76: mt7915: add dev->hif2 support for mt7916 WED device

Message ID 73e1988a12a60fa0c661edc8328a302b92392b94.1677056399.git.sujuan.chen@mediatek.com (mailing list archive)
State Superseded
Delegated to: Felix Fietkau
Headers show
Series [v2] wifi: mt76: mt7915: add dev->hif2 support for mt7916 WED device | expand

Commit Message

Sujuan Chen Feb. 22, 2023, 9:08 a.m. UTC
Enable two PCIe interfaces (dev->hif2) support for mt7916 when WED is enabled.

Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/dma.c  | 10 ++++++++--
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c  |  4 +++-
 drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 10 +++++-----
 3 files changed, 16 insertions(+), 8 deletions(-)

Comments

Lorenzo Bianconi Feb. 22, 2023, 10:23 a.m. UTC | #1
> Enable two PCIe interfaces (dev->hif2) support for mt7916 when WED is enabled.
> 
> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
> ---
>  drivers/net/wireless/mediatek/mt76/mt7915/dma.c  | 10 ++++++++--
>  drivers/net/wireless/mediatek/mt76/mt7915/mcu.c  |  4 +++-
>  drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 10 +++++-----
>  3 files changed, 16 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> index abe17dac9996..43a5456d4b97 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> @@ -87,8 +87,14 @@ static void mt7915_dma_config(struct mt7915_dev *dev)
>  				   MT7916_RXQ_BAND0);
>  			RXQ_CONFIG(MT_RXQ_MCU_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MT7916,
>  				   MT7916_RXQ_MCU_WA);
> -			RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0, MT_INT_WED_RX_DONE_BAND1_MT7916,
> -				   MT7916_RXQ_BAND1);
> +			if (dev->hif2)
> +				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
> +					   MT_INT_RX_DONE_BAND1_MT7916,
> +					   MT7916_RXQ_BAND1);
> +			else
> +				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
> +					   MT_INT_WED_RX_DONE_BAND1_MT7916,
> +					   MT7916_RXQ_BAND1);
>  			RXQ_CONFIG(MT_RXQ_MAIN_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MAIN_MT7916,
>  				   MT7916_RXQ_MCU_WA_MAIN);
>  			TXQ_CONFIG(0, WFDMA0, MT_INT_WED_TX_DONE_BAND0,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> index 5545a8bdf1d0..1dfbcc9bf755 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> @@ -2370,7 +2370,9 @@ int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
>  	if (ret)
>  		return ret;
>  
> -	if (mtk_wed_device_active(&dev->mt76.mmio.wed) && is_mt7915(&dev->mt76))
> +	if ((mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> +	     is_mt7915(&dev->mt76)) ||
> +	    (!mtk_wed_get_rx_capa(&dev->mt76.mmio.wed)))

you do not need brackets around mtk_wed_get_rx_capa().

Regards,
Lorenzo

>  		mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0, 0, 0);
>  
>  	ret = mt7915_mcu_set_mwds(dev, 1);
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> index 225a19604d3e..6f0c0e2ae045 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> @@ -989,13 +989,13 @@ irqreturn_t mt7915_irq_handler(int irq, void *dev_instance)
>  	struct mt7915_dev *dev = dev_instance;
>  	struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
>  
> -	if (mtk_wed_device_active(wed)) {
> +	if (mtk_wed_device_active(wed))
>  		mtk_wed_device_irq_set_mask(wed, 0);
> -	} else {
> +	else
>  		mt76_wr(dev, MT_INT_MASK_CSR, 0);
> -		if (dev->hif2)
> -			mt76_wr(dev, MT_INT1_MASK_CSR, 0);
> -	}
> +
> +	if (dev->hif2)
> +		mt76_wr(dev, MT_INT1_MASK_CSR, 0);
>  
>  	if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state))
>  		return IRQ_NONE;
> -- 
> 2.18.0
>
Sujuan Chen Feb. 22, 2023, 1:03 p.m. UTC | #2
On Wed, 2023-02-22 at 11:23 +0100, Lorenzo Bianconi wrote:
> > Enable two PCIe interfaces (dev->hif2) support for mt7916 when WED
> > is enabled.
> > 
> > Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
> > ---
> >  drivers/net/wireless/mediatek/mt76/mt7915/dma.c  | 10 ++++++++--
> >  drivers/net/wireless/mediatek/mt76/mt7915/mcu.c  |  4 +++-
> >  drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 10 +++++-----
> >  3 files changed, 16 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> > b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> > index abe17dac9996..43a5456d4b97 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> > @@ -87,8 +87,14 @@ static void mt7915_dma_config(struct mt7915_dev
> > *dev)
> >  				   MT7916_RXQ_BAND0);
> >  			RXQ_CONFIG(MT_RXQ_MCU_WA, WFDMA0,
> > MT_INT_WED_RX_DONE_WA_MT7916,
> >  				   MT7916_RXQ_MCU_WA);
> > -			RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
> > MT_INT_WED_RX_DONE_BAND1_MT7916,
> > -				   MT7916_RXQ_BAND1);
> > +			if (dev->hif2)
> > +				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
> > +					   MT_INT_RX_DONE_BAND1_MT7916,
> > +					   MT7916_RXQ_BAND1);
> > +			else
> > +				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
> > +					   MT_INT_WED_RX_DONE_BAND1_MT7
> > 916,
> > +					   MT7916_RXQ_BAND1);
> >  			RXQ_CONFIG(MT_RXQ_MAIN_WA, WFDMA0,
> > MT_INT_WED_RX_DONE_WA_MAIN_MT7916,
> >  				   MT7916_RXQ_MCU_WA_MAIN);
> >  			TXQ_CONFIG(0, WFDMA0, MT_INT_WED_TX_DONE_BAND0,
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > index 5545a8bdf1d0..1dfbcc9bf755 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > @@ -2370,7 +2370,9 @@ int mt7915_mcu_init_firmware(struct
> > mt7915_dev *dev)
> >  	if (ret)
> >  		return ret;
> >  
> > -	if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> > is_mt7915(&dev->mt76))
> > +	if ((mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> > +	     is_mt7915(&dev->mt76)) ||
> > +	    (!mtk_wed_get_rx_capa(&dev->mt76.mmio.wed)))
> 
> you do not need brackets around mtk_wed_get_rx_capa().
> 

ack, will fix it in v3

Regards,
Sujuan

> Regards,
> Lorenzo
> 
> >  		mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0,
> > 0, 0);
> >  
> >  	ret = mt7915_mcu_set_mwds(dev, 1);
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > index 225a19604d3e..6f0c0e2ae045 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > @@ -989,13 +989,13 @@ irqreturn_t mt7915_irq_handler(int irq, void
> > *dev_instance)
> >  	struct mt7915_dev *dev = dev_instance;
> >  	struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
> >  
> > -	if (mtk_wed_device_active(wed)) {
> > +	if (mtk_wed_device_active(wed))
> >  		mtk_wed_device_irq_set_mask(wed, 0);
> > -	} else {
> > +	else
> >  		mt76_wr(dev, MT_INT_MASK_CSR, 0);
> > -		if (dev->hif2)
> > -			mt76_wr(dev, MT_INT1_MASK_CSR, 0);
> > -	}
> > +
> > +	if (dev->hif2)
> > +		mt76_wr(dev, MT_INT1_MASK_CSR, 0);
> >  
> >  	if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state))
> >  		return IRQ_NONE;
> > -- 
> > 2.18.0
> >
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
index abe17dac9996..43a5456d4b97 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
@@ -87,8 +87,14 @@  static void mt7915_dma_config(struct mt7915_dev *dev)
 				   MT7916_RXQ_BAND0);
 			RXQ_CONFIG(MT_RXQ_MCU_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MT7916,
 				   MT7916_RXQ_MCU_WA);
-			RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0, MT_INT_WED_RX_DONE_BAND1_MT7916,
-				   MT7916_RXQ_BAND1);
+			if (dev->hif2)
+				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
+					   MT_INT_RX_DONE_BAND1_MT7916,
+					   MT7916_RXQ_BAND1);
+			else
+				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
+					   MT_INT_WED_RX_DONE_BAND1_MT7916,
+					   MT7916_RXQ_BAND1);
 			RXQ_CONFIG(MT_RXQ_MAIN_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MAIN_MT7916,
 				   MT7916_RXQ_MCU_WA_MAIN);
 			TXQ_CONFIG(0, WFDMA0, MT_INT_WED_TX_DONE_BAND0,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 5545a8bdf1d0..1dfbcc9bf755 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2370,7 +2370,9 @@  int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
 	if (ret)
 		return ret;
 
-	if (mtk_wed_device_active(&dev->mt76.mmio.wed) && is_mt7915(&dev->mt76))
+	if ((mtk_wed_device_active(&dev->mt76.mmio.wed) &&
+	     is_mt7915(&dev->mt76)) ||
+	    (!mtk_wed_get_rx_capa(&dev->mt76.mmio.wed)))
 		mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0, 0, 0);
 
 	ret = mt7915_mcu_set_mwds(dev, 1);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
index 225a19604d3e..6f0c0e2ae045 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
@@ -989,13 +989,13 @@  irqreturn_t mt7915_irq_handler(int irq, void *dev_instance)
 	struct mt7915_dev *dev = dev_instance;
 	struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
 
-	if (mtk_wed_device_active(wed)) {
+	if (mtk_wed_device_active(wed))
 		mtk_wed_device_irq_set_mask(wed, 0);
-	} else {
+	else
 		mt76_wr(dev, MT_INT_MASK_CSR, 0);
-		if (dev->hif2)
-			mt76_wr(dev, MT_INT1_MASK_CSR, 0);
-	}
+
+	if (dev->hif2)
+		mt76_wr(dev, MT_INT1_MASK_CSR, 0);
 
 	if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state))
 		return IRQ_NONE;