| Message ID | 20230427104428.862643-2-mie@igel.co.jp (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | Introduce a PCIe endpoint virtio console | expand |
Simple typos, don't repost until there's more substantive feedback. On Thu, Apr 27, 2023 at 07:44:26PM +0900, Shunsuke Mie wrote: > The Linux PCIe Endpoint framework supports to implement PCIe endpoint > functions using a PCIe controller operating in endpoint mode. > It is possble to realize the behavior of PCIe device, such as virtio PCI > device. This patch introduces a setof helper functions and data structures > to implement a PCIe endpoint function that behaves as a virtio device. s/possble/possible/ s/setof/set of/ > Those functions enable the implementation PCIe endpoint function that > comply with the virtio lecacy specification. Because modern virtio > specifications require devices to implement custom PCIe capabilities, which > are not currently supported by either PCIe controllers/drivers or the PCIe > endpoint framework. s/implementation PCIe endpoint function/implementation of PCIe endpoint functions/ s/lecacy/legacy/ (What does "legacy" mean? Is there a spec for this?) I guess "legacy virtio" devices need not implement custom PCIe capabilities, but "modern virtio" devices must implement them? Capitalize "Endpoint framework" consistently; sometimes it's "Endpoint", other times it's "endpoint". > While this patch provides functions for negotiating with host drivers and > copying data, each PCIe function driver must impl ement operations that > depend on each specific device, such as network, block, etc. s/impl ement/implement/ > +#include <linux/virtio_pci.h> > +#include <linux/virtio_config.h> > +#include <linux/kthread.h> Typically the header includes would be alphabetized if possible. > + vq_virt = pci_epc_map_addr(epf->epc, epf->func_no, epf->vfunc_no, > + vq_pci_addr, vq_phys, vq_size); > + if (IS_ERR(vq_virt)) { > + pr_err("Failed to map virtuqueue to local"); s/virtuqueue/virtqueue/ I know you probably don't have any way to use dev_err(), but this message really needs some context, like a driver name and instance or something. > +#define VIRTIO_PCI_LEGACY_CFG_BAR 0 What makes this a "legacy cfg BAR"? Is there some spec that covers virtio BAR usage? > + * epf_virtio_init - initialize struct epf_virtio and setup BAR for virtio > + * @evio: struct epf_virtio to initialize. > + * @hdr: pci configuration space to show remote host. > + * @bar_size: pci BAR size it depends on the virtio device type. s/pci/PCI/ (there were also a few more instances above in messages or comments) > + * epf_virtio_final - finalize struct epf_virtio. it frees bar and memories > + * @evio: struct epf_virtio to finalize. s/bar/BAR/ > +static void epf_virtio_monitor_qnotify(struct epf_virtio *evio) > +{ > + const u16 qn_default = evio->nvq; > + u16 tmp; > + > + /* Since there is no way to synchronize between the host and EP functions, > + * it is possible to miss multiple notifications. Multi-line comment style. > + err = epf_virtio_negotiate_vq(evio); > + if (err < 0) { > + pr_err("failed to negoticate configs with driver\n"); s/negoticate/negotiate/ > + * epf_virtio_reset - reset virtio status Some of the function descriptions end with a period (".") and others don't. Please figure out what the most common style is and use that consistently. > + dst = pci_epc_map_addr(epf->epc, epf->func_no, > + epf->vfunc_no, dbase, &phys, > + slen); > + if (IS_ERR(dst)) { > + pr_err("failed to map pci mmoery spact to local\n"); s/pci/PCI/ s/mmoery/memory/ s/spact/space/ ? Also below. IIRC some previous messages started with a capital letter. Please make them all consistent. > + if (dir == DMA_MEM_TO_DEV) { > + pci_epc_unmap_addr(epf->epc, epf->func_no, > + epf->vfunc_no, phys, dst, slen); > + } else { > + pci_epc_unmap_addr(epf->epc, epf->func_no, > + epf->vfunc_no, phys, src, slen); > + } > + } > + > + return 1; I guess this function returns either a negative error code or the value 1? That seems sort of weird (I think "negative error code or *zero* is more typical), but maybe you're following some convention? > +#include <linux/pci-epf.h> > +#include <linux/pci-epc.h> > +#include <linux/vringh.h> > +#include <linux/dmaengine.h> Alpha order if possible > + /* Virtual address of pci configuration space */ s/pci/PCI/ > + /* Callback function and parameter for queue notifcation > + * Note: PCI EP function cannot detect qnotify accurately, therefore this > + * callback function should check all of virtqueue's changes. > + */ Multi-line comment style. Bjorn
On Thu, Apr 27, 2023 at 6:44 PM Shunsuke Mie <mie@igel.co.jp> wrote: > > The Linux PCIe Endpoint framework supports to implement PCIe endpoint > functions using a PCIe controller operating in endpoint mode. > It is possble to realize the behavior of PCIe device, such as virtio PCI > device. This patch introduces a setof helper functions and data structures > to implement a PCIe endpoint function that behaves as a virtio device. > > Those functions enable the implementation PCIe endpoint function that > comply with the virtio lecacy specification. Because modern virtio > specifications require devices to implement custom PCIe capabilities, which > are not currently supported by either PCIe controllers/drivers or the PCIe > endpoint framework. > > The helper functions work with the new struct epf_virtio, which is > initialized and finalized using the following functions: > > - int epf_virtio_init(); > - void epf_virtio_final() > > Once initialized, the PCIe configuration space can be read and written > using the following functions: > > - epf_virtio_cfg_{read,write}#size() > - epf_virtio_cfg_{set,clear}#size() > - epf_virtio_cfg_memcpy_toio() > > The size is supported 8, 16 and 32bits. The content of configuration space > varies depending on the type of virtio device. > > After the setup, launch the kernel thread for negotiation with host virtio > drivers and detection virtqueue notifications with the function: > > - epf_virtio_launch_bgtask() > > Also there are functions to shutdown and reset the kthread. > > - epf_virtio_terminate_bgtask() > - epf_virtio_terminate_reset() > > Data transfer function is also provide. > > - epf_virtio_memcpy_kiov2kiov() > > While this patch provides functions for negotiating with host drivers and > copying data, each PCIe function driver must impl ement operations that > depend on each specific device, such as network, block, etc. > > Signed-off-by: Shunsuke Mie <mie@igel.co.jp> > --- > > Changes from v2: > - Improve the memcpy function between kiov and kiov on local ram and > remote ram via pcie bus. > > drivers/pci/endpoint/functions/Kconfig | 7 + > drivers/pci/endpoint/functions/Makefile | 1 + > .../pci/endpoint/functions/pci-epf-virtio.c | 458 ++++++++++++++++++ > .../pci/endpoint/functions/pci-epf-virtio.h | 126 +++++ > 4 files changed, 592 insertions(+) > create mode 100644 drivers/pci/endpoint/functions/pci-epf-virtio.c > create mode 100644 drivers/pci/endpoint/functions/pci-epf-virtio.h > > diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig > index 9fd560886871..fa1a6a569a8f 100644 > --- a/drivers/pci/endpoint/functions/Kconfig > +++ b/drivers/pci/endpoint/functions/Kconfig > @@ -37,3 +37,10 @@ config PCI_EPF_VNTB > between PCI Root Port and PCIe Endpoint. > > If in doubt, say "N" to disable Endpoint NTB driver. > + > +config PCI_EPF_VIRTIO > + tristate > + depends on PCI_ENDPOINT > + select VHOST_RING_IOMEM > + help > + Helpers to implement PCI virtio Endpoint function > diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile > index 5c13001deaba..a96f127ce900 100644 > --- a/drivers/pci/endpoint/functions/Makefile > +++ b/drivers/pci/endpoint/functions/Makefile > @@ -6,3 +6,4 @@ > obj-$(CONFIG_PCI_EPF_TEST) += pci-epf-test.o > obj-$(CONFIG_PCI_EPF_NTB) += pci-epf-ntb.o > obj-$(CONFIG_PCI_EPF_VNTB) += pci-epf-vntb.o > +obj-$(CONFIG_PCI_EPF_VIRTIO) += pci-epf-virtio.o > diff --git a/drivers/pci/endpoint/functions/pci-epf-virtio.c b/drivers/pci/endpoint/functions/pci-epf-virtio.c > new file mode 100644 > index 000000000000..f67610dd247d > --- /dev/null > +++ b/drivers/pci/endpoint/functions/pci-epf-virtio.c > @@ -0,0 +1,458 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Helpers to implement PCIe virtio EP function. > + */ > +#include <linux/virtio_pci.h> > +#include <linux/virtio_config.h> > +#include <linux/kthread.h> > + > +#include "pci-epf-virtio.h" > + > +static void epf_virtio_unmap_vq(struct pci_epf *epf, void __iomem *vq_virt, > + phys_addr_t vq_phys, unsigned int num) > +{ > + size_t vq_size = vring_size(num, VIRTIO_PCI_VRING_ALIGN); > + > + pci_epc_unmap_addr(epf->epc, epf->func_no, epf->vfunc_no, vq_phys, > + vq_virt, vq_size); > + pci_epc_mem_free_addr(epf->epc, vq_phys, vq_virt, vq_size); > +} > + > +static void __iomem *epf_virtio_map_vq(struct pci_epf *epf, > + phys_addr_t vq_pci_addr, > + unsigned int num, phys_addr_t *vq_phys) > +{ > + int err; > + size_t vq_size; > + void __iomem *vq_virt; > + > + vq_size = vring_size(num, VIRTIO_PCI_VRING_ALIGN); > + > + vq_virt = pci_epc_map_addr(epf->epc, epf->func_no, epf->vfunc_no, > + vq_pci_addr, vq_phys, vq_size); > + if (IS_ERR(vq_virt)) { > + pr_err("Failed to map virtuqueue to local"); > + goto err_free; > + } > + > + return vq_virt; > + > +err_free: > + pci_epc_mem_free_addr(epf->epc, *vq_phys, vq_virt, vq_size); > + > + return ERR_PTR(err); > +} > + > +static void epf_virtio_free_vringh(struct pci_epf *epf, struct epf_vringh *evrh) > +{ > + epf_virtio_unmap_vq(epf, evrh->virt, evrh->phys, evrh->num); > + kfree(evrh); > +} > + > +static struct epf_vringh *epf_virtio_alloc_vringh(struct pci_epf *epf, > + u64 features, > + phys_addr_t pci_addr, > + unsigned int num) > +{ > + int err; > + struct vring vring; > + struct epf_vringh *evrh; > + > + evrh = kmalloc(sizeof(*evrh), GFP_KERNEL); > + if (!evrh) { > + err = -ENOMEM; > + goto err_unmap_vq; > + } > + > + evrh->num = num; > + > + evrh->virt = epf_virtio_map_vq(epf, pci_addr, num, &evrh->phys); > + if (IS_ERR(evrh->virt)) > + return evrh->virt; > + > + vring_init(&vring, num, evrh->virt, VIRTIO_PCI_VRING_ALIGN); > + > + err = vringh_init_iomem(&evrh->vrh, features, num, false, vring.desc, > + vring.avail, vring.used); > + if (err) > + goto err_free_epf_vq; > + > + return evrh; > + > +err_free_epf_vq: > + kfree(evrh); > + > +err_unmap_vq: > + epf_virtio_unmap_vq(epf, evrh->virt, evrh->phys, evrh->num); > + > + return ERR_PTR(err); > +} > + > +#define VIRTIO_PCI_LEGACY_CFG_BAR 0 > + > +static void __iomem *epf_virtio_alloc_bar(struct pci_epf *epf, size_t size) > +{ > + struct pci_epf_bar *config_bar = &epf->bar[VIRTIO_PCI_LEGACY_CFG_BAR]; > + const struct pci_epc_features *features; > + void __iomem *bar; > + int err; > + > + features = pci_epc_get_features(epf->epc, epf->func_no, epf->vfunc_no); > + if (!features) { > + pr_debug("Failed to get PCI EPC features\n"); > + return ERR_PTR(-EOPNOTSUPP); > + } > + > + if (features->reserved_bar & BIT(VIRTIO_PCI_LEGACY_CFG_BAR)) { > + pr_debug("Cannot use the PCI BAR for legacy virtio pci\n"); > + return ERR_PTR(-EOPNOTSUPP); Since 1.0 has been used for years, I would suggest starting from a modern device other than a legacy one. Otherwise you may end up with some hacky stuffs more below. > + } > + > + if (features->bar_fixed_size[VIRTIO_PCI_LEGACY_CFG_BAR]) { > + if (size > > + features->bar_fixed_size[VIRTIO_PCI_LEGACY_CFG_BAR]) { > + pr_debug("PCI BAR size is not enough\n"); > + return ERR_PTR(-ENOMEM); > + } > + } > + > + bar = pci_epf_alloc_space(epf, size, VIRTIO_PCI_LEGACY_CFG_BAR, > + features->align, PRIMARY_INTERFACE); > + if (!bar) { > + pr_debug("Failed to allocate virtio-net config memory\n"); > + return ERR_PTR(-ENOMEM); > + } > + > + config_bar->flags |= PCI_BASE_ADDRESS_MEM_TYPE_64; This is the tricky part: 1) spec said legacy bar is I/O not memory 2) this code may still work if the host is running with Linux since the virtio driver work for memory bar 3) but it may not work if the host is not running with Linux > + err = pci_epc_set_bar(epf->epc, epf->func_no, epf->vfunc_no, > + config_bar); > + if (err) { > + pr_debug("Failed to set PCI BAR"); > + goto err_free_space; > + } > + > + return bar; > + > +err_free_space: > + > + pci_epf_free_space(epf, bar, VIRTIO_PCI_LEGACY_CFG_BAR, > + PRIMARY_INTERFACE); > + > + return ERR_PTR(err); > +} > + > +static void epf_virtio_free_bar(struct pci_epf *epf, void __iomem *bar) > +{ > + struct pci_epf_bar *config_bar = &epf->bar[VIRTIO_PCI_LEGACY_CFG_BAR]; > + > + pci_epc_clear_bar(epf->epc, epf->func_no, epf->vfunc_no, config_bar); > + pci_epf_free_space(epf, bar, VIRTIO_PCI_LEGACY_CFG_BAR, > + PRIMARY_INTERFACE); > +} > + > +static void epf_virtio_init_bar(struct epf_virtio *evio, void __iomem *bar) > +{ > + evio->bar = bar; > + > + epf_virtio_cfg_write32(evio, VIRTIO_PCI_HOST_FEATURES, evio->features); > + epf_virtio_cfg_write16(evio, VIRTIO_PCI_ISR, VIRTIO_PCI_ISR_QUEUE); > + epf_virtio_cfg_write16(evio, VIRTIO_PCI_QUEUE_NUM, evio->vqlen); > + epf_virtio_cfg_write16(evio, VIRTIO_PCI_QUEUE_NOTIFY, evio->nvq); > + epf_virtio_cfg_write8(evio, VIRTIO_PCI_STATUS, 0); > +} > + > +/** > + * epf_virtio_init - initialize struct epf_virtio and setup BAR for virtio > + * @evio: struct epf_virtio to initialize. > + * @hdr: pci configuration space to show remote host. > + * @bar_size: pci BAR size it depends on the virtio device type. > + * > + * Returns zero or a negative error. > + */ > +int epf_virtio_init(struct epf_virtio *evio, struct pci_epf_header *hdr, > + size_t bar_size) > +{ > + struct pci_epf *epf = evio->epf; > + void __iomem *bar; > + int err; > + > + err = pci_epc_write_header(epf->epc, epf->func_no, epf->vfunc_no, hdr); > + if (err) > + return err; > + > + bar = epf_virtio_alloc_bar(epf, bar_size); > + if (IS_ERR(bar)) > + return PTR_ERR(bar); > + > + epf_virtio_init_bar(evio, bar); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(epf_virtio_init); > + > +/** > + * epf_virtio_final - finalize struct epf_virtio. it frees bar and memories > + * @evio: struct epf_virtio to finalize. > + */ > +void epf_virtio_final(struct epf_virtio *evio) > +{ > + epf_virtio_free_bar(evio->epf, evio->bar); > + > + for (int i = 0; i < evio->nvq; i++) > + epf_virtio_free_vringh(evio->epf, evio->vrhs[i]); > + > + kfree(evio->vrhs); > +} > +EXPORT_SYMBOL_GPL(epf_virtio_final); > + > +static int epf_virtio_negotiate_vq(struct epf_virtio *evio) > +{ > + u32 pfn; > + u16 sel; > + int i = 0; > + struct _pair { > + u32 pfn; > + u16 sel; > + } *tmp; > + int err = 0; > + size_t nvq = evio->nvq; > + > + tmp = kmalloc_array(nvq, sizeof(tmp[0]), GFP_KERNEL); > + if (!tmp) > + return -ENOMEM; > + > + /* > + * PCIe EP framework has no capability to hook access PCI BAR space from > + * remote host driver, so poll the specific register, queue pfn to detect > + * the writing from the driver. There were discussions in the past which tried to have a new transport that works for the endpoint instead of doing tricks like this. Have you ever considered this? > + * > + * This implementation assumes that the address of each virtqueue is > + * written only once. > + */ > + for (i = 0; i < nvq; i++) { > + while (!(pfn = epf_virtio_cfg_read32(evio, > + VIRTIO_PCI_QUEUE_PFN)) && > + evio->running) > + ; Should we do cond_resched() here? > + > + sel = epf_virtio_cfg_read16(evio, VIRTIO_PCI_QUEUE_SEL); > + > + epf_virtio_cfg_write32(evio, VIRTIO_PCI_QUEUE_PFN, 0); > + > + tmp[i].pfn = pfn; > + tmp[i].sel = sel; > + } > + > + if (!evio->running) > + goto err_out; > + > + evio->vrhs = kmalloc_array(nvq, sizeof(evio->vrhs[0]), GFP_KERNEL); > + if (!evio->vrhs) { > + err = -ENOMEM; > + goto err_out; > + } > + > + for (i = 0; i < nvq; i++) { > + phys_addr_t pci = tmp[i].pfn << VIRTIO_PCI_QUEUE_ADDR_SHIFT; > + > + evio->vrhs[i] = epf_virtio_alloc_vringh( > + evio->epf, evio->features, pci, evio->vqlen); > + if (IS_ERR(evio->vrhs[i])) { > + err = PTR_ERR(evio->vrhs[i]); > + goto err_free_evrhs; > + } > + } > + > + kfree(tmp); > + > + return 0; > + > +err_free_evrhs: > + for (i -= 1; i > 0; i--) > + epf_virtio_free_vringh(evio->epf, evio->vrhs[i]); > + > + kfree(evio->vrhs); > + > +err_out: > + kfree(tmp); > + > + return err; > +} > + > +static void epf_virtio_monitor_qnotify(struct epf_virtio *evio) > +{ > + const u16 qn_default = evio->nvq; > + u16 tmp; > + > + /* Since there is no way to synchronize between the host and EP functions, > + * it is possible to miss multiple notifications. > + */ > + while (evio->running) { > + tmp = epf_virtio_cfg_read16(evio, VIRTIO_PCI_QUEUE_NOTIFY); > + if (tmp == qn_default) > + continue; cond_resched()? > + > + epf_virtio_cfg_write16(evio, VIRTIO_PCI_QUEUE_NOTIFY, > + qn_default); > + > + evio->qn_callback(evio->qn_param); > + } > +} > + > +static int epf_virtio_bgtask(void *param) > +{ > + struct epf_virtio *evio = param; > + int err; > + > + err = epf_virtio_negotiate_vq(evio); > + if (err < 0) { > + pr_err("failed to negoticate configs with driver\n"); > + return err; > + } > + > + while (!(epf_virtio_cfg_read8(evio, VIRTIO_PCI_STATUS) & > + VIRTIO_CONFIG_S_DRIVER_OK) && > + evio->running) > + ; > + > + if (evio->ic_callback && evio->running) > + evio->ic_callback(evio->ic_param); > + > + epf_virtio_monitor_qnotify(evio); > + > + return 0; > +} > + > +/** > + * epf_virtio_launch_bgtask - spawn a kthread that emulates virtio device > + * operations. > + * @evio: It should be initialized prior with epf_virtio_init(). > + * > + * Returns zero or a negative error. > + */ > +int epf_virtio_launch_bgtask(struct epf_virtio *evio) > +{ > + evio->bgtask = kthread_create(epf_virtio_bgtask, evio, > + "pci-epf-virtio/bgtask"); > + if (IS_ERR(evio->bgtask)) > + return PTR_ERR(evio->bgtask); > + > + evio->running = true; > + > + sched_set_fifo(evio->bgtask); > + wake_up_process(evio->bgtask); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(epf_virtio_launch_bgtask); > + > +/** > + * epf_virtio_terminate_bgtask - shutdown a device emulation kthread. > + * @evio: struct epf_virtio it already launched bgtask. > + */ > +void epf_virtio_terminate_bgtask(struct epf_virtio *evio) > +{ > + evio->running = false; > + > + kthread_stop(evio->bgtask); > +} > +EXPORT_SYMBOL_GPL(epf_virtio_terminate_bgtask); > + > +/** > + * epf_virtio_reset - reset virtio status > + * @evio: struct epf_virtio to reset > + * > + * Returns zero or a negative error. > + */ > +int epf_virtio_reset(struct epf_virtio *evio) > +{ > + epf_virtio_terminate_bgtask(evio); > + epf_virtio_init_bar(evio, evio->bar); > + > + return epf_virtio_launch_bgtask(evio); > +} > +EXPORT_SYMBOL_GPL(epf_virtio_reset); > + > +int epf_virtio_getdesc(struct epf_virtio *evio, int index, > + struct vringh_kiov *riov, struct vringh_kiov *wiov, > + u16 *head) > +{ > + struct vringh *vrh = &evio->vrhs[index]->vrh; > + > + return vringh_getdesc_iomem(vrh, riov, wiov, head, GFP_KERNEL); > +} > + > +void epf_virtio_abandon(struct epf_virtio *evio, int index, int num) > +{ > + struct vringh *vrh = &evio->vrhs[index]->vrh; > + > + vringh_abandon_iomem(vrh, num); > +} > + > +void epf_virtio_iov_complete(struct epf_virtio *evio, int index, u16 head, > + size_t total_len) > +{ > + struct vringh *vrh = &evio->vrhs[index]->vrh; > + > + vringh_complete_iomem(vrh, head, total_len); > +} > + > +int epf_virtio_memcpy_kiov2kiov(struct epf_virtio *evio, > + struct vringh_kiov *siov, > + struct vringh_kiov *diov, > + enum dma_transfer_direction dir) > +{ > + struct pci_epf *epf = evio->epf; > + size_t slen, dlen; > + u64 sbase, dbase; > + phys_addr_t phys; > + void *dst, *src; > + > + for (; siov->i < siov->used; siov->i++, diov->i++) { > + slen = siov->iov[siov->i].iov_len; > + sbase = (u64)siov->iov[siov->i].iov_base; > + dlen = diov->iov[diov->i].iov_len; > + dbase = (u64)diov->iov[diov->i].iov_base; > + > + if (dlen < slen) { > + pr_info("not enough buffer\n"); > + return -EINVAL; > + } > + > + if (dir == DMA_MEM_TO_DEV) { > + src = phys_to_virt(sbase); > + > + dst = pci_epc_map_addr(epf->epc, epf->func_no, > + epf->vfunc_no, dbase, &phys, > + slen); > + if (IS_ERR(dst)) { > + pr_err("failed to map pci mmoery spact to local\n"); Typos. > + return PTR_ERR(dst); > + } > + } else { > + src = pci_epc_map_addr(epf->epc, epf->func_no, > + epf->vfunc_no, sbase, &phys, > + slen); > + if (IS_ERR(src)) { > + pr_err("failed to map pci mmoery spact to local\n"); Typos. Thanks
I'll fix the typo and some styles you mentioned. In this e-mail, I reply to the other comments. 2023年4月28日(金) 3:28 Bjorn Helgaas <helgaas@kernel.org>: > > Simple typos, don't repost until there's more substantive feedback. > > On Thu, Apr 27, 2023 at 07:44:26PM +0900, Shunsuke Mie wrote: > > The Linux PCIe Endpoint framework supports to implement PCIe endpoint > > functions using a PCIe controller operating in endpoint mode. > > It is possble to realize the behavior of PCIe device, such as virtio PCI > > device. This patch introduces a setof helper functions and data structures > > to implement a PCIe endpoint function that behaves as a virtio device. > > s/possble/possible/ > s/setof/set of/ > > > Those functions enable the implementation PCIe endpoint function that > > comply with the virtio lecacy specification. Because modern virtio > > specifications require devices to implement custom PCIe capabilities, which > > are not currently supported by either PCIe controllers/drivers or the PCIe > > endpoint framework. > > s/implementation PCIe endpoint function/implementation of PCIe endpoint functions/ > s/lecacy/legacy/ (What does "legacy" mean? Is there a spec for this?) Yes, it is defined in spec. > I guess "legacy virtio" devices need not implement custom PCIe > capabilities, but "modern virtio" devices must implement them? That I wanted to explain here. > Capitalize "Endpoint framework" consistently; sometimes it's > "Endpoint", other times it's "endpoint". I'll take care to be consistent. > > While this patch provides functions for negotiating with host drivers and > > copying data, each PCIe function driver must impl ement operations that > > depend on each specific device, such as network, block, etc. > > s/impl ement/implement/ > > > +#include <linux/virtio_pci.h> > > +#include <linux/virtio_config.h> > > +#include <linux/kthread.h> > > Typically the header includes would be alphabetized if possible. I'll try to reorder them. > > + vq_virt = pci_epc_map_addr(epf->epc, epf->func_no, epf->vfunc_no, > > + vq_pci_addr, vq_phys, vq_size); > > + if (IS_ERR(vq_virt)) { > > + pr_err("Failed to map virtuqueue to local"); > > s/virtuqueue/virtqueue/ > > I know you probably don't have any way to use dev_err(), but this > message really needs some context, like a driver name and instance or > something. I'll try to use the dev_* function appropriately If possible. > > +#define VIRTIO_PCI_LEGACY_CFG_BAR 0 > > What makes this a "legacy cfg BAR"? Is there some spec that covers > virtio BAR usage? Yes. Virtio Legacy interface defines the PCI BAR number to use. https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-14500010 > > + * epf_virtio_init - initialize struct epf_virtio and setup BAR for virtio > > + * @evio: struct epf_virtio to initialize. > > + * @hdr: pci configuration space to show remote host. > > + * @bar_size: pci BAR size it depends on the virtio device type. > > s/pci/PCI/ (there were also a few more instances above in messages or > comments) > > > + * epf_virtio_final - finalize struct epf_virtio. it frees bar and memories > > + * @evio: struct epf_virtio to finalize. > > s/bar/BAR/ > > > +static void epf_virtio_monitor_qnotify(struct epf_virtio *evio) > > +{ > > + const u16 qn_default = evio->nvq; > > + u16 tmp; > > + > > + /* Since there is no way to synchronize between the host and EP functions, > > + * it is possible to miss multiple notifications. > > Multi-line comment style. > > > + err = epf_virtio_negotiate_vq(evio); > > + if (err < 0) { > > + pr_err("failed to negoticate configs with driver\n"); > > s/negoticate/negotiate/ > > > + * epf_virtio_reset - reset virtio status > > Some of the function descriptions end with a period (".") and others > don't. Please figure out what the most common style is and use that > consistently. I agree. I'll fix to be consistent. > > + dst = pci_epc_map_addr(epf->epc, epf->func_no, > > + epf->vfunc_no, dbase, &phys, > > + slen); > > + if (IS_ERR(dst)) { > > + pr_err("failed to map pci mmoery spact to local\n"); > > s/pci/PCI/ > s/mmoery/memory/ > s/spact/space/ ? > > Also below. > > IIRC some previous messages started with a capital letter. Please > make them all consistent. Sure. > > + if (dir == DMA_MEM_TO_DEV) { > > + pci_epc_unmap_addr(epf->epc, epf->func_no, > > + epf->vfunc_no, phys, dst, slen); > > + } else { > > + pci_epc_unmap_addr(epf->epc, epf->func_no, > > + epf->vfunc_no, phys, src, slen); > > + } > > + } > > + > > + return 1; > > I guess this function returns either a negative error code or the > value 1? That seems sort of weird (I think "negative error code or > *zero* is more typical), but maybe you're following some convention? It has to be 0. It is my mistake. Some vringh functions return 0 (data does not exist), 1 (it exists), or error. But this functions is not related. > > +#include <linux/pci-epf.h> > > +#include <linux/pci-epc.h> > > +#include <linux/vringh.h> > > +#include <linux/dmaengine.h> > > Alpha order if possible Yes. > > + /* Virtual address of pci configuration space */ > > s/pci/PCI/ > > > + /* Callback function and parameter for queue notifcation > > + * Note: PCI EP function cannot detect qnotify accurately, therefore this > > + * callback function should check all of virtqueue's changes. > > + */ > > Multi-line comment style. > > Bjorn Best regards, Shunsuke
diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig index 9fd560886871..fa1a6a569a8f 100644 --- a/drivers/pci/endpoint/functions/Kconfig +++ b/drivers/pci/endpoint/functions/Kconfig @@ -37,3 +37,10 @@ config PCI_EPF_VNTB between PCI Root Port and PCIe Endpoint. If in doubt, say "N" to disable Endpoint NTB driver. + +config PCI_EPF_VIRTIO + tristate + depends on PCI_ENDPOINT + select VHOST_RING_IOMEM + help + Helpers to implement PCI virtio Endpoint function diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile index 5c13001deaba..a96f127ce900 100644 --- a/drivers/pci/endpoint/functions/Makefile +++ b/drivers/pci/endpoint/functions/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI_EPF_TEST) += pci-epf-test.o obj-$(CONFIG_PCI_EPF_NTB) += pci-epf-ntb.o obj-$(CONFIG_PCI_EPF_VNTB) += pci-epf-vntb.o +obj-$(CONFIG_PCI_EPF_VIRTIO) += pci-epf-virtio.o diff --git a/drivers/pci/endpoint/functions/pci-epf-virtio.c b/drivers/pci/endpoint/functions/pci-epf-virtio.c new file mode 100644 index 000000000000..f67610dd247d --- /dev/null +++ b/drivers/pci/endpoint/functions/pci-epf-virtio.c @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Helpers to implement PCIe virtio EP function. + */ +#include <linux/virtio_pci.h> +#include <linux/virtio_config.h> +#include <linux/kthread.h> + +#include "pci-epf-virtio.h" + +static void epf_virtio_unmap_vq(struct pci_epf *epf, void __iomem *vq_virt, + phys_addr_t vq_phys, unsigned int num) +{ + size_t vq_size = vring_size(num, VIRTIO_PCI_VRING_ALIGN); + + pci_epc_unmap_addr(epf->epc, epf->func_no, epf->vfunc_no, vq_phys, + vq_virt, vq_size); + pci_epc_mem_free_addr(epf->epc, vq_phys, vq_virt, vq_size); +} + +static void __iomem *epf_virtio_map_vq(struct pci_epf *epf, + phys_addr_t vq_pci_addr, + unsigned int num, phys_addr_t *vq_phys) +{ + int err; + size_t vq_size; + void __iomem *vq_virt; + + vq_size = vring_size(num, VIRTIO_PCI_VRING_ALIGN); + + vq_virt = pci_epc_map_addr(epf->epc, epf->func_no, epf->vfunc_no, + vq_pci_addr, vq_phys, vq_size); + if (IS_ERR(vq_virt)) { + pr_err("Failed to map virtuqueue to local"); + goto err_free; + } + + return vq_virt; + +err_free: + pci_epc_mem_free_addr(epf->epc, *vq_phys, vq_virt, vq_size); + + return ERR_PTR(err); +} + +static void epf_virtio_free_vringh(struct pci_epf *epf, struct epf_vringh *evrh) +{ + epf_virtio_unmap_vq(epf, evrh->virt, evrh->phys, evrh->num); + kfree(evrh); +} + +static struct epf_vringh *epf_virtio_alloc_vringh(struct pci_epf *epf, + u64 features, + phys_addr_t pci_addr, + unsigned int num) +{ + int err; + struct vring vring; + struct epf_vringh *evrh; + + evrh = kmalloc(sizeof(*evrh), GFP_KERNEL); + if (!evrh) { + err = -ENOMEM; + goto err_unmap_vq; + } + + evrh->num = num; + + evrh->virt = epf_virtio_map_vq(epf, pci_addr, num, &evrh->phys); + if (IS_ERR(evrh->virt)) + return evrh->virt; + + vring_init(&vring, num, evrh->virt, VIRTIO_PCI_VRING_ALIGN); + + err = vringh_init_iomem(&evrh->vrh, features, num, false, vring.desc, + vring.avail, vring.used); + if (err) + goto err_free_epf_vq; + + return evrh; + +err_free_epf_vq: + kfree(evrh); + +err_unmap_vq: + epf_virtio_unmap_vq(epf, evrh->virt, evrh->phys, evrh->num); + + return ERR_PTR(err); +} + +#define VIRTIO_PCI_LEGACY_CFG_BAR 0 + +static void __iomem *epf_virtio_alloc_bar(struct pci_epf *epf, size_t size) +{ + struct pci_epf_bar *config_bar = &epf->bar[VIRTIO_PCI_LEGACY_CFG_BAR]; + const struct pci_epc_features *features; + void __iomem *bar; + int err; + + features = pci_epc_get_features(epf->epc, epf->func_no, epf->vfunc_no); + if (!features) { + pr_debug("Failed to get PCI EPC features\n"); + return ERR_PTR(-EOPNOTSUPP); + } + + if (features->reserved_bar & BIT(VIRTIO_PCI_LEGACY_CFG_BAR)) { + pr_debug("Cannot use the PCI BAR for legacy virtio pci\n"); + return ERR_PTR(-EOPNOTSUPP); + } + + if (features->bar_fixed_size[VIRTIO_PCI_LEGACY_CFG_BAR]) { + if (size > + features->bar_fixed_size[VIRTIO_PCI_LEGACY_CFG_BAR]) { + pr_debug("PCI BAR size is not enough\n"); + return ERR_PTR(-ENOMEM); + } + } + + bar = pci_epf_alloc_space(epf, size, VIRTIO_PCI_LEGACY_CFG_BAR, + features->align, PRIMARY_INTERFACE); + if (!bar) { + pr_debug("Failed to allocate virtio-net config memory\n"); + return ERR_PTR(-ENOMEM); + } + + config_bar->flags |= PCI_BASE_ADDRESS_MEM_TYPE_64; + err = pci_epc_set_bar(epf->epc, epf->func_no, epf->vfunc_no, + config_bar); + if (err) { + pr_debug("Failed to set PCI BAR"); + goto err_free_space; + } + + return bar; + +err_free_space: + + pci_epf_free_space(epf, bar, VIRTIO_PCI_LEGACY_CFG_BAR, + PRIMARY_INTERFACE); + + return ERR_PTR(err); +} + +static void epf_virtio_free_bar(struct pci_epf *epf, void __iomem *bar) +{ + struct pci_epf_bar *config_bar = &epf->bar[VIRTIO_PCI_LEGACY_CFG_BAR]; + + pci_epc_clear_bar(epf->epc, epf->func_no, epf->vfunc_no, config_bar); + pci_epf_free_space(epf, bar, VIRTIO_PCI_LEGACY_CFG_BAR, + PRIMARY_INTERFACE); +} + +static void epf_virtio_init_bar(struct epf_virtio *evio, void __iomem *bar) +{ + evio->bar = bar; + + epf_virtio_cfg_write32(evio, VIRTIO_PCI_HOST_FEATURES, evio->features); + epf_virtio_cfg_write16(evio, VIRTIO_PCI_ISR, VIRTIO_PCI_ISR_QUEUE); + epf_virtio_cfg_write16(evio, VIRTIO_PCI_QUEUE_NUM, evio->vqlen); + epf_virtio_cfg_write16(evio, VIRTIO_PCI_QUEUE_NOTIFY, evio->nvq); + epf_virtio_cfg_write8(evio, VIRTIO_PCI_STATUS, 0); +} + +/** + * epf_virtio_init - initialize struct epf_virtio and setup BAR for virtio + * @evio: struct epf_virtio to initialize. + * @hdr: pci configuration space to show remote host. + * @bar_size: pci BAR size it depends on the virtio device type. + * + * Returns zero or a negative error. + */ +int epf_virtio_init(struct epf_virtio *evio, struct pci_epf_header *hdr, + size_t bar_size) +{ + struct pci_epf *epf = evio->epf; + void __iomem *bar; + int err; + + err = pci_epc_write_header(epf->epc, epf->func_no, epf->vfunc_no, hdr); + if (err) + return err; + + bar = epf_virtio_alloc_bar(epf, bar_size); + if (IS_ERR(bar)) + return PTR_ERR(bar); + + epf_virtio_init_bar(evio, bar); + + return 0; +} +EXPORT_SYMBOL_GPL(epf_virtio_init); + +/** + * epf_virtio_final - finalize struct epf_virtio. it frees bar and memories + * @evio: struct epf_virtio to finalize. + */ +void epf_virtio_final(struct epf_virtio *evio) +{ + epf_virtio_free_bar(evio->epf, evio->bar); + + for (int i = 0; i < evio->nvq; i++) + epf_virtio_free_vringh(evio->epf, evio->vrhs[i]); + + kfree(evio->vrhs); +} +EXPORT_SYMBOL_GPL(epf_virtio_final); + +static int epf_virtio_negotiate_vq(struct epf_virtio *evio) +{ + u32 pfn; + u16 sel; + int i = 0; + struct _pair { + u32 pfn; + u16 sel; + } *tmp; + int err = 0; + size_t nvq = evio->nvq; + + tmp = kmalloc_array(nvq, sizeof(tmp[0]), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + /* + * PCIe EP framework has no capability to hook access PCI BAR space from + * remote host driver, so poll the specific register, queue pfn to detect + * the writing from the driver. + * + * This implementation assumes that the address of each virtqueue is + * written only once. + */ + for (i = 0; i < nvq; i++) { + while (!(pfn = epf_virtio_cfg_read32(evio, + VIRTIO_PCI_QUEUE_PFN)) && + evio->running) + ; + + sel = epf_virtio_cfg_read16(evio, VIRTIO_PCI_QUEUE_SEL); + + epf_virtio_cfg_write32(evio, VIRTIO_PCI_QUEUE_PFN, 0); + + tmp[i].pfn = pfn; + tmp[i].sel = sel; + } + + if (!evio->running) + goto err_out; + + evio->vrhs = kmalloc_array(nvq, sizeof(evio->vrhs[0]), GFP_KERNEL); + if (!evio->vrhs) { + err = -ENOMEM; + goto err_out; + } + + for (i = 0; i < nvq; i++) { + phys_addr_t pci = tmp[i].pfn << VIRTIO_PCI_QUEUE_ADDR_SHIFT; + + evio->vrhs[i] = epf_virtio_alloc_vringh( + evio->epf, evio->features, pci, evio->vqlen); + if (IS_ERR(evio->vrhs[i])) { + err = PTR_ERR(evio->vrhs[i]); + goto err_free_evrhs; + } + } + + kfree(tmp); + + return 0; + +err_free_evrhs: + for (i -= 1; i > 0; i--) + epf_virtio_free_vringh(evio->epf, evio->vrhs[i]); + + kfree(evio->vrhs); + +err_out: + kfree(tmp); + + return err; +} + +static void epf_virtio_monitor_qnotify(struct epf_virtio *evio) +{ + const u16 qn_default = evio->nvq; + u16 tmp; + + /* Since there is no way to synchronize between the host and EP functions, + * it is possible to miss multiple notifications. + */ + while (evio->running) { + tmp = epf_virtio_cfg_read16(evio, VIRTIO_PCI_QUEUE_NOTIFY); + if (tmp == qn_default) + continue; + + epf_virtio_cfg_write16(evio, VIRTIO_PCI_QUEUE_NOTIFY, + qn_default); + + evio->qn_callback(evio->qn_param); + } +} + +static int epf_virtio_bgtask(void *param) +{ + struct epf_virtio *evio = param; + int err; + + err = epf_virtio_negotiate_vq(evio); + if (err < 0) { + pr_err("failed to negoticate configs with driver\n"); + return err; + } + + while (!(epf_virtio_cfg_read8(evio, VIRTIO_PCI_STATUS) & + VIRTIO_CONFIG_S_DRIVER_OK) && + evio->running) + ; + + if (evio->ic_callback && evio->running) + evio->ic_callback(evio->ic_param); + + epf_virtio_monitor_qnotify(evio); + + return 0; +} + +/** + * epf_virtio_launch_bgtask - spawn a kthread that emulates virtio device + * operations. + * @evio: It should be initialized prior with epf_virtio_init(). + * + * Returns zero or a negative error. + */ +int epf_virtio_launch_bgtask(struct epf_virtio *evio) +{ + evio->bgtask = kthread_create(epf_virtio_bgtask, evio, + "pci-epf-virtio/bgtask"); + if (IS_ERR(evio->bgtask)) + return PTR_ERR(evio->bgtask); + + evio->running = true; + + sched_set_fifo(evio->bgtask); + wake_up_process(evio->bgtask); + + return 0; +} +EXPORT_SYMBOL_GPL(epf_virtio_launch_bgtask); + +/** + * epf_virtio_terminate_bgtask - shutdown a device emulation kthread. + * @evio: struct epf_virtio it already launched bgtask. + */ +void epf_virtio_terminate_bgtask(struct epf_virtio *evio) +{ + evio->running = false; + + kthread_stop(evio->bgtask); +} +EXPORT_SYMBOL_GPL(epf_virtio_terminate_bgtask); + +/** + * epf_virtio_reset - reset virtio status + * @evio: struct epf_virtio to reset + * + * Returns zero or a negative error. + */ +int epf_virtio_reset(struct epf_virtio *evio) +{ + epf_virtio_terminate_bgtask(evio); + epf_virtio_init_bar(evio, evio->bar); + + return epf_virtio_launch_bgtask(evio); +} +EXPORT_SYMBOL_GPL(epf_virtio_reset); + +int epf_virtio_getdesc(struct epf_virtio *evio, int index, + struct vringh_kiov *riov, struct vringh_kiov *wiov, + u16 *head) +{ + struct vringh *vrh = &evio->vrhs[index]->vrh; + + return vringh_getdesc_iomem(vrh, riov, wiov, head, GFP_KERNEL); +} + +void epf_virtio_abandon(struct epf_virtio *evio, int index, int num) +{ + struct vringh *vrh = &evio->vrhs[index]->vrh; + + vringh_abandon_iomem(vrh, num); +} + +void epf_virtio_iov_complete(struct epf_virtio *evio, int index, u16 head, + size_t total_len) +{ + struct vringh *vrh = &evio->vrhs[index]->vrh; + + vringh_complete_iomem(vrh, head, total_len); +} + +int epf_virtio_memcpy_kiov2kiov(struct epf_virtio *evio, + struct vringh_kiov *siov, + struct vringh_kiov *diov, + enum dma_transfer_direction dir) +{ + struct pci_epf *epf = evio->epf; + size_t slen, dlen; + u64 sbase, dbase; + phys_addr_t phys; + void *dst, *src; + + for (; siov->i < siov->used; siov->i++, diov->i++) { + slen = siov->iov[siov->i].iov_len; + sbase = (u64)siov->iov[siov->i].iov_base; + dlen = diov->iov[diov->i].iov_len; + dbase = (u64)diov->iov[diov->i].iov_base; + + if (dlen < slen) { + pr_info("not enough buffer\n"); + return -EINVAL; + } + + if (dir == DMA_MEM_TO_DEV) { + src = phys_to_virt(sbase); + + dst = pci_epc_map_addr(epf->epc, epf->func_no, + epf->vfunc_no, dbase, &phys, + slen); + if (IS_ERR(dst)) { + pr_err("failed to map pci mmoery spact to local\n"); + return PTR_ERR(dst); + } + } else { + src = pci_epc_map_addr(epf->epc, epf->func_no, + epf->vfunc_no, sbase, &phys, + slen); + if (IS_ERR(src)) { + pr_err("failed to map pci mmoery spact to local\n"); + return PTR_ERR(src); + } + + dst = phys_to_virt(dbase); + } + + memcpy_fromio(dst, src, slen); + + if (dir == DMA_MEM_TO_DEV) { + pci_epc_unmap_addr(epf->epc, epf->func_no, + epf->vfunc_no, phys, dst, slen); + } else { + pci_epc_unmap_addr(epf->epc, epf->func_no, + epf->vfunc_no, phys, src, slen); + } + } + + return 1; +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/pci/endpoint/functions/pci-epf-virtio.h b/drivers/pci/endpoint/functions/pci-epf-virtio.h new file mode 100644 index 000000000000..80e18ff70c1c --- /dev/null +++ b/drivers/pci/endpoint/functions/pci-epf-virtio.h @@ -0,0 +1,126 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PCI_EPF_VIRTIO_H__ +#define __PCI_EPF_VIRTIO_H__ + +#include <linux/pci-epf.h> +#include <linux/pci-epc.h> +#include <linux/vringh.h> +#include <linux/dmaengine.h> + +struct epf_vringh { + struct vringh vrh; + void __iomem *virt; + phys_addr_t phys; + unsigned int num; +}; + +struct epf_virtio { + /* Base PCI endpoint function */ + struct pci_epf *epf; + + /* Virtio parameters */ + u64 features; + size_t bar_size; + size_t nvq; + size_t vqlen; + + /* struct to access virtqueue on remote host */ + struct epf_vringh **vrhs; + + /* struct for thread to emulate virtio device */ + struct task_struct *bgtask; + + /* Virtual address of pci configuration space */ + void __iomem *bar; + + /* Callback function and parameter for queue notifcation + * Note: PCI EP function cannot detect qnotify accurately, therefore this + * callback function should check all of virtqueue's changes. + */ + void (*qn_callback)(void *param); + void *qn_param; + + /* Callback function and parameter for initialize complete */ + void (*ic_callback)(void *param); + void *ic_param; + + bool running; +}; + +#define DEFINE_EPF_VIRTIO_CFG_READ(size) \ + static inline u##size epf_virtio_cfg_read##size( \ + struct epf_virtio *evio, size_t offset) \ + { \ + void __iomem *base = evio->bar + offset; \ + return ioread##size(base); \ + } + +DEFINE_EPF_VIRTIO_CFG_READ(8) +DEFINE_EPF_VIRTIO_CFG_READ(16) +DEFINE_EPF_VIRTIO_CFG_READ(32) + +#define DEFINE_EPF_VIRTIO_CFG_WRITE(size) \ + static inline void epf_virtio_cfg_write##size( \ + struct epf_virtio *evio, size_t offset, u##size value) \ + { \ + void __iomem *base = evio->bar + offset; \ + iowrite##size(value, base); \ + } + +DEFINE_EPF_VIRTIO_CFG_WRITE(8); +DEFINE_EPF_VIRTIO_CFG_WRITE(16); +DEFINE_EPF_VIRTIO_CFG_WRITE(32); + +#define DEFINE_EPF_VIRTIO_CFG_SET(size) \ + static inline void epf_virtio_cfg_set##size( \ + struct epf_virtio *evio, size_t offset, u##size value) \ + { \ + void __iomem *base = evio->bar + offset; \ + iowrite##size(ioread##size(base) | value, base); \ + } + +DEFINE_EPF_VIRTIO_CFG_SET(8) +DEFINE_EPF_VIRTIO_CFG_SET(16) +DEFINE_EPF_VIRTIO_CFG_SET(32) + +#define DEFINE_EPF_VIRTIO_CFG_CLEAR(size) \ + static inline void epf_virtio_cfg_clear##size( \ + struct epf_virtio *evio, size_t offset, u##size value) \ + { \ + void __iomem *base = evio->bar + offset; \ + iowrite##size(ioread##size(base) & ~value, base); \ + } + +DEFINE_EPF_VIRTIO_CFG_CLEAR(8) +DEFINE_EPF_VIRTIO_CFG_CLEAR(16) +DEFINE_EPF_VIRTIO_CFG_CLEAR(32) + +static inline void epf_virtio_cfg_memcpy_toio(struct epf_virtio *evio, + size_t offset, void *buf, + size_t len) +{ + void __iomem *base = evio->bar + offset; + + memcpy_toio(base, buf, len); +} + +int epf_virtio_init(struct epf_virtio *evio, struct pci_epf_header *hdr, + size_t bar_size); +void epf_virtio_final(struct epf_virtio *evio); +int epf_virtio_launch_bgtask(struct epf_virtio *evio); +void epf_virtio_terminate_bgtask(struct epf_virtio *evio); +int epf_virtio_reset(struct epf_virtio *evio); + +int epf_virtio_getdesc(struct epf_virtio *evio, int index, + struct vringh_kiov *riov, struct vringh_kiov *wiov, + u16 *head); +void epf_virtio_abandon(struct epf_virtio *evio, int index, int num); +void epf_virtio_iov_complete(struct epf_virtio *evio, int index, u16 head, + size_t total_len); + +int epf_virtio_memcpy_kiov2kiov(struct epf_virtio *evio, + struct vringh_kiov *siov, + struct vringh_kiov *diov, + enum dma_transfer_direction dir); + +#endif /* __PCI_EPF_VIRTIO_H__ */
The Linux PCIe Endpoint framework supports to implement PCIe endpoint functions using a PCIe controller operating in endpoint mode. It is possble to realize the behavior of PCIe device, such as virtio PCI device. This patch introduces a setof helper functions and data structures to implement a PCIe endpoint function that behaves as a virtio device. Those functions enable the implementation PCIe endpoint function that comply with the virtio lecacy specification. Because modern virtio specifications require devices to implement custom PCIe capabilities, which are not currently supported by either PCIe controllers/drivers or the PCIe endpoint framework. The helper functions work with the new struct epf_virtio, which is initialized and finalized using the following functions: - int epf_virtio_init(); - void epf_virtio_final() Once initialized, the PCIe configuration space can be read and written using the following functions: - epf_virtio_cfg_{read,write}#size() - epf_virtio_cfg_{set,clear}#size() - epf_virtio_cfg_memcpy_toio() The size is supported 8, 16 and 32bits. The content of configuration space varies depending on the type of virtio device. After the setup, launch the kernel thread for negotiation with host virtio drivers and detection virtqueue notifications with the function: - epf_virtio_launch_bgtask() Also there are functions to shutdown and reset the kthread. - epf_virtio_terminate_bgtask() - epf_virtio_terminate_reset() Data transfer function is also provide. - epf_virtio_memcpy_kiov2kiov() While this patch provides functions for negotiating with host drivers and copying data, each PCIe function driver must impl ement operations that depend on each specific device, such as network, block, etc. Signed-off-by: Shunsuke Mie <mie@igel.co.jp> --- Changes from v2: - Improve the memcpy function between kiov and kiov on local ram and remote ram via pcie bus. drivers/pci/endpoint/functions/Kconfig | 7 + drivers/pci/endpoint/functions/Makefile | 1 + .../pci/endpoint/functions/pci-epf-virtio.c | 458 ++++++++++++++++++ .../pci/endpoint/functions/pci-epf-virtio.h | 126 +++++ 4 files changed, 592 insertions(+) create mode 100644 drivers/pci/endpoint/functions/pci-epf-virtio.c create mode 100644 drivers/pci/endpoint/functions/pci-epf-virtio.h