diff mbox series

[ndctl,2/2] README.md: document CXL unit tests

Message ID 20230523035704.826188-2-lizhijian@fujitsu.com
State Superseded
Headers show
Series [ndctl,1/2] CONTRIBUTING.md: document cxl mailing list | expand

Commit Message

Li Zhijian May 23, 2023, 3:57 a.m. UTC
It requires some CLX specific kconfigs and testing purpose module

Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
---
 README.md | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

Comments

Dave Jiang May 25, 2023, 3:28 p.m. UTC | #1
On 5/22/23 20:57, Li Zhijian wrote:
> It requires some CLX specific kconfigs and testing purpose module
>
> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
> ---
>   README.md | 17 +++++++++++++++--
>   1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/README.md b/README.md
> index 7c7cf0dd065d..521e2582fb05 100644
> --- a/README.md
> +++ b/README.md
> @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start
>   
>   Unit Tests
>   ==========
> -The unit tests run by `meson test` require the nfit_test.ko module to be
> -loaded.  To build and install nfit_test.ko:
> +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be
> +loaded.  To build and install nfit_test.ko and cxl_test.ko:
>   
>   1. Obtain the kernel source.  For example,
>      `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git`
> @@ -70,6 +70,13 @@ loaded.  To build and install nfit_test.ko:
>      CONFIG_NVDIMM_DAX=y
>      CONFIG_DEV_DAX_PMEM=m
>      CONFIG_ENCRYPTED_KEYS=y
> +   CONFIG_CXL_BUS=m
> +   CONFIG_CXL_PCI=m
> +   CONFIG_CXL_ACPI=m
> +   CONFIG_CXL_PMEM=m
> +   CONFIG_CXL_MEM=m
> +   CONFIG_CXL_PORT=m
> +   CONFIG_DEV_DAX_CXL=m

Probably should have a separate entry for CXL configs for testing. 
There's a cxl.git at kernel.org as well.

Also will need:

CONFIG_NVDIMM_SECURITY_TEST=y

CONFIG_CXL_REGION_INVALIDATION_TEST=y



>      ```
>   
>   1. Build and install the unit test enabled libnvdimm modules in the
> @@ -77,8 +84,14 @@ loaded.  To build and install nfit_test.ko:
>      the `depmod` that runs during the final `modules_install`
>   
>      ```
> +   # For nfit_test.ko
>      make M=tools/testing/nvdimm
>      sudo make M=tools/testing/nvdimm modules_install
> +
> +   # For cxl_test.ko
> +   make M=tools/testing/cxl
> +   sudo make M=tools/testing/cxl modules_install
> +
>      sudo make modules_install
>      ```
>
Li Zhijian May 26, 2023, 4:01 a.m. UTC | #2
On 25/05/2023 23:28, Dave Jiang wrote:
> 
> On 5/22/23 20:57, Li Zhijian wrote:
>> It requires some CLX specific kconfigs and testing purpose module
>>
>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
>> ---
>>   README.md | 17 +++++++++++++++--
>>   1 file changed, 15 insertions(+), 2 deletions(-)
>>
>> diff --git a/README.md b/README.md
>> index 7c7cf0dd065d..521e2582fb05 100644
>> --- a/README.md
>> +++ b/README.md
>> @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start
>>   Unit Tests
>>   ==========
>> -The unit tests run by `meson test` require the nfit_test.ko module to be
>> -loaded.  To build and install nfit_test.ko:
>> +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be
>> +loaded.  To build and install nfit_test.ko and cxl_test.ko:
>>   1. Obtain the kernel source.  For example,
>>      `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git`
>> @@ -70,6 +70,13 @@ loaded.  To build and install nfit_test.ko:
>>      CONFIG_NVDIMM_DAX=y
>>      CONFIG_DEV_DAX_PMEM=m
>>      CONFIG_ENCRYPTED_KEYS=y
>> +   CONFIG_CXL_BUS=m
>> +   CONFIG_CXL_PCI=m
>> +   CONFIG_CXL_ACPI=m
>> +   CONFIG_CXL_PMEM=m
>> +   CONFIG_CXL_MEM=m
>> +   CONFIG_CXL_PORT=m
>> +   CONFIG_DEV_DAX_CXL=m
> 
> Probably should have a separate entry for CXL configs for testing. There's a cxl.git at kernel.org as well.
> 
> Also will need:
> 
> CONFIG_NVDIMM_SECURITY_TEST=y
> 

I also noticed that Yi have sent a patch to add this and some other kconfigs
https://lore.kernel.org/nvdimm/20230516121730.2561605-1-yi.zhang@redhat.com/T/#u

> CONFIG_CXL_REGION_INVALIDATION_TEST=y

Yes, i indeed missed it.

I insert a section before *run the test* as below. A markdown preview of README.md
Please take another look.

diff --git a/README.md b/README.md
index 7c7cf0dd065d..324d179ac4ea 100644
--- a/README.md
+++ b/README.md
@@ -82,6 +82,32 @@ loaded.  To build and install nfit_test.ko:
     sudo make modules_install
     ```
  
+1. CXL test
+
+   The unit tests will also run CXL test by default. In order to make the
+   CXL test work properly, we need to install the cxl_test.ko as well.
+
+   Obtain the CXL kernel source(optional).  For example,
+   `git clone -b pending git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git`
+
+   Enable CXL specific kernel configurations
+   ```
+   CONFIG_CXL_BUS=m
+   CONFIG_CXL_PCI=m
+   CONFIG_CXL_ACPI=m
+   CONFIG_CXL_PMEM=m
+   CONFIG_CXL_MEM=m
+   CONFIG_CXL_PORT=m
+   CONFIG_CXL_REGION=y
+   CONFIG_CXL_REGION_INVALIDATION_TEST=y
+   CONFIG_DEV_DAX_CXL=m
+   ```
+   Install cxl_test.ko
+   ```For cxl_test.ko
+   make M=tools/testing/cxl
+   sudo make M=tools/testing/cxl modules_install
+   sudo make modules_install
+   ```
  1. Now run `meson test -C build` in the ndctl source directory, or `ndctl test`,
     if ndctl was built with `-Dtest=enabled` as a configuration option to meson.


> 
> 
> 
>>      ```
>>   1. Build and install the unit test enabled libnvdimm modules in the
>> @@ -77,8 +84,14 @@ loaded.  To build and install nfit_test.ko:
>>      the `depmod` that runs during the final `modules_install`
>>      ```
>> +   # For nfit_test.ko
>>      make M=tools/testing/nvdimm
>>      sudo make M=tools/testing/nvdimm modules_install
>> +
>> +   # For cxl_test.ko
>> +   make M=tools/testing/cxl
>> +   sudo make M=tools/testing/cxl modules_install
>> +
>>      sudo make modules_install
>>      ```
Li Zhijian May 26, 2023, 4:21 a.m. UTC | #3
On 26/05/2023 12:01, Zhijian Li (Fujitsu) wrote:
> 
> 
> On 25/05/2023 23:28, Dave Jiang wrote:
>>
>> On 5/22/23 20:57, Li Zhijian wrote:
>>> It requires some CLX specific kconfigs and testing purpose module
>>>
>>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
>>> ---
>>>    README.md | 17 +++++++++++++++--
>>>    1 file changed, 15 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/README.md b/README.md
>>> index 7c7cf0dd065d..521e2582fb05 100644
>>> --- a/README.md
>>> +++ b/README.md
>>> @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start
>>>    Unit Tests
>>>    ==========
>>> -The unit tests run by `meson test` require the nfit_test.ko module to be
>>> -loaded.  To build and install nfit_test.ko:
>>> +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be
>>> +loaded.  To build and install nfit_test.ko and cxl_test.ko:
>>>    1. Obtain the kernel source.  For example,
>>>       `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git`
>>> @@ -70,6 +70,13 @@ loaded.  To build and install nfit_test.ko:
>>>       CONFIG_NVDIMM_DAX=y
>>>       CONFIG_DEV_DAX_PMEM=m
>>>       CONFIG_ENCRYPTED_KEYS=y
>>> +   CONFIG_CXL_BUS=m
>>> +   CONFIG_CXL_PCI=m
>>> +   CONFIG_CXL_ACPI=m
>>> +   CONFIG_CXL_PMEM=m
>>> +   CONFIG_CXL_MEM=m
>>> +   CONFIG_CXL_PORT=m
>>> +   CONFIG_DEV_DAX_CXL=m
>>
>> Probably should have a separate entry for CXL configs for testing. There's a cxl.git at kernel.org as well.
>>
>> Also will need:
>>
>> CONFIG_NVDIMM_SECURITY_TEST=y
>>
> 
> I also noticed that Yi have sent a patch to add this and some other kconfigs
> https://lore.kernel.org/nvdimm/20230516121730.2561605-1-yi.zhang@redhat.com/T/#u
> 
>> CONFIG_CXL_REGION_INVALIDATION_TEST=y
> 
> Yes, i indeed missed it.
> 
> I insert a section before *run the test* as below. A markdown preview of README.md 


Attach the README preview link: https://github.com/zhijianli88/ndctl/blob/cxl/README.md



> Please take another look.
> 
> diff --git a/README.md b/README.md
> index 7c7cf0dd065d..324d179ac4ea 100644
> --- a/README.md
> +++ b/README.md
> @@ -82,6 +82,32 @@ loaded.  To build and install nfit_test.ko:
>       sudo make modules_install
>       ```
>    
> +1. CXL test
> +
> +   The unit tests will also run CXL test by default. In order to make the
> +   CXL test work properly, we need to install the cxl_test.ko as well.
> +
> +   Obtain the CXL kernel source(optional).  For example,
> +   `git clone -b pending git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git`
> +
> +   Enable CXL specific kernel configurations
> +   ```
> +   CONFIG_CXL_BUS=m
> +   CONFIG_CXL_PCI=m
> +   CONFIG_CXL_ACPI=m
> +   CONFIG_CXL_PMEM=m
> +   CONFIG_CXL_MEM=m
> +   CONFIG_CXL_PORT=m
> +   CONFIG_CXL_REGION=y
> +   CONFIG_CXL_REGION_INVALIDATION_TEST=y
> +   CONFIG_DEV_DAX_CXL=m
> +   ```
> +   Install cxl_test.ko
> +   ```For cxl_test.ko
> +   make M=tools/testing/cxl
> +   sudo make M=tools/testing/cxl modules_install
> +   sudo make modules_install
> +   ```
>    1. Now run `meson test -C build` in the ndctl source directory, or `ndctl test`,
>       if ndctl was built with `-Dtest=enabled` as a configuration option to meson.
> 
> 
>>
>>
>>
>>>       ```
>>>    1. Build and install the unit test enabled libnvdimm modules in the
>>> @@ -77,8 +84,14 @@ loaded.  To build and install nfit_test.ko:
>>>       the `depmod` that runs during the final `modules_install`
>>>       ```
>>> +   # For nfit_test.ko
>>>       make M=tools/testing/nvdimm
>>>       sudo make M=tools/testing/nvdimm modules_install
>>> +
>>> +   # For cxl_test.ko
>>> +   make M=tools/testing/cxl
>>> +   sudo make M=tools/testing/cxl modules_install
>>> +
>>>       sudo make modules_install
>>>       ```
Dave Jiang May 30, 2023, 9:38 p.m. UTC | #4
On 5/25/23 21:01, Zhijian Li (Fujitsu) wrote:
>
> On 25/05/2023 23:28, Dave Jiang wrote:
>> On 5/22/23 20:57, Li Zhijian wrote:
>>> It requires some CLX specific kconfigs and testing purpose module
>>>
>>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
>>> ---
>>>    README.md | 17 +++++++++++++++--
>>>    1 file changed, 15 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/README.md b/README.md
>>> index 7c7cf0dd065d..521e2582fb05 100644
>>> --- a/README.md
>>> +++ b/README.md
>>> @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start
>>>    Unit Tests
>>>    ==========
>>> -The unit tests run by `meson test` require the nfit_test.ko module to be
>>> -loaded.  To build and install nfit_test.ko:
>>> +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be
>>> +loaded.  To build and install nfit_test.ko and cxl_test.ko:
>>>    1. Obtain the kernel source.  For example,
>>>       `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git`
>>> @@ -70,6 +70,13 @@ loaded.  To build and install nfit_test.ko:
>>>       CONFIG_NVDIMM_DAX=y
>>>       CONFIG_DEV_DAX_PMEM=m
>>>       CONFIG_ENCRYPTED_KEYS=y
>>> +   CONFIG_CXL_BUS=m
>>> +   CONFIG_CXL_PCI=m
>>> +   CONFIG_CXL_ACPI=m
>>> +   CONFIG_CXL_PMEM=m
>>> +   CONFIG_CXL_MEM=m
>>> +   CONFIG_CXL_PORT=m
>>> +   CONFIG_DEV_DAX_CXL=m
>> Probably should have a separate entry for CXL configs for testing. There's a cxl.git at kernel.org as well.
>>
>> Also will need:
>>
>> CONFIG_NVDIMM_SECURITY_TEST=y
>>
> I also noticed that Yi have sent a patch to add this and some other kconfigs
> https://lore.kernel.org/nvdimm/20230516121730.2561605-1-yi.zhang@redhat.com/T/#u
>
>> CONFIG_CXL_REGION_INVALIDATION_TEST=y
> Yes, i indeed missed it.
>
> I insert a section before *run the test* as below. A markdown preview of README.md
> Please take another look.
>
> diff --git a/README.md b/README.md
> index 7c7cf0dd065d..324d179ac4ea 100644
> --- a/README.md
> +++ b/README.md
> @@ -82,6 +82,32 @@ loaded.  To build and install nfit_test.ko:
>       sudo make modules_install
>       ```
>    
> +1. CXL test
> +
> +   The unit tests will also run CXL test by default. In order to make the
> +   CXL test work properly, we need to install the cxl_test.ko as well.
> +
> +   Obtain the CXL kernel source(optional).  For example,
> +   `git clone -b pending git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git`
> +
> +   Enable CXL specific kernel configurations
> +   ```
> +   CONFIG_CXL_BUS=m
> +   CONFIG_CXL_PCI=m
> +   CONFIG_CXL_ACPI=m
> +   CONFIG_CXL_PMEM=m
> +   CONFIG_CXL_MEM=m
> +   CONFIG_CXL_PORT=m
> +   CONFIG_CXL_REGION=y
> +   CONFIG_CXL_REGION_INVALIDATION_TEST=y
> +   CONFIG_DEV_DAX_CXL=m
> +   ```
> +   Install cxl_test.ko
> +   ```For cxl_test.ko
> +   make M=tools/testing/cxl
> +   sudo make M=tools/testing/cxl modules_install
> +   sudo make modules_install
> +   ```
>    1. Now run `meson test -C build` in the ndctl source directory, or `ndctl test`,
>       if ndctl was built with `-Dtest=enabled` as a configuration option to meson.


LGTM


>
>
>>
>>
>>>       ```
>>>    1. Build and install the unit test enabled libnvdimm modules in the
>>> @@ -77,8 +84,14 @@ loaded.  To build and install nfit_test.ko:
>>>       the `depmod` that runs during the final `modules_install`
>>>       ```
>>> +   # For nfit_test.ko
>>>       make M=tools/testing/nvdimm
>>>       sudo make M=tools/testing/nvdimm modules_install
>>> +
>>> +   # For cxl_test.ko
>>> +   make M=tools/testing/cxl
>>> +   sudo make M=tools/testing/cxl modules_install
>>> +
>>>       sudo make modules_install
>>>       ```
diff mbox series

Patch

diff --git a/README.md b/README.md
index 7c7cf0dd065d..521e2582fb05 100644
--- a/README.md
+++ b/README.md
@@ -39,8 +39,8 @@  https://nvdimm.wiki.kernel.org/start
 
 Unit Tests
 ==========
-The unit tests run by `meson test` require the nfit_test.ko module to be
-loaded.  To build and install nfit_test.ko:
+The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be
+loaded.  To build and install nfit_test.ko and cxl_test.ko:
 
 1. Obtain the kernel source.  For example,  
    `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git`  
@@ -70,6 +70,13 @@  loaded.  To build and install nfit_test.ko:
    CONFIG_NVDIMM_DAX=y
    CONFIG_DEV_DAX_PMEM=m
    CONFIG_ENCRYPTED_KEYS=y
+   CONFIG_CXL_BUS=m
+   CONFIG_CXL_PCI=m
+   CONFIG_CXL_ACPI=m
+   CONFIG_CXL_PMEM=m
+   CONFIG_CXL_MEM=m
+   CONFIG_CXL_PORT=m
+   CONFIG_DEV_DAX_CXL=m
    ```
 
 1. Build and install the unit test enabled libnvdimm modules in the
@@ -77,8 +84,14 @@  loaded.  To build and install nfit_test.ko:
    the `depmod` that runs during the final `modules_install`  
 
    ```
+   # For nfit_test.ko
    make M=tools/testing/nvdimm
    sudo make M=tools/testing/nvdimm modules_install
+
+   # For cxl_test.ko
+   make M=tools/testing/cxl
+   sudo make M=tools/testing/cxl modules_install
+
    sudo make modules_install
    ```