diff mbox

[3/7] ARM: mxs: convert m28evk board to device tree

Message ID 1341814496-17487-4-git-send-email-shawn.guo@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Shawn Guo July 9, 2012, 6:14 a.m. UTC 
From: Marek Vasut <marex@denx.de>

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/boot/dts/imx28.dtsi |   21 ++++
 arch/arm/boot/dts/m28evk.dts |  241 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mxs/mach-mxs.c |   30 +++++
 3 files changed, 292 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/m28evk.dts

Comments

Marek Vasut July 9, 2012, 7:10 a.m. UTC | #1 
Dear Shawn Guo,

> From: Marek Vasut <marex@denx.de>
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  arch/arm/boot/dts/imx28.dtsi |   21 ++++
>  arch/arm/boot/dts/m28evk.dts |  241
> ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mxs/mach-mxs.c | 
>  30 +++++
>  3 files changed, 292 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/m28evk.dts
[...]

> +static void __init m28evk_init(void)
> +{
> +	update_fec_mac_prop(OUI_DENX);

You need to start the FEC clock here too, otherwise ethernet won't work. Same 
thing as on mx28evk. And I noticed that on other platforms too, so maybe that 
should be somehow the other way around -- turn on the ethernet clock by default.

The rest seems OK. I'll update the .dts file once we get the rest of the stuff 
in (SPI and i2c).

btw. is someone converting the mxs-lcd ?

> +	mxsfb_pdata.mode_list = m28evk_video_modes;
> +	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
> +	mxsfb_pdata.default_bpp = 16;
> +	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
> +}
> +
>  static void __init mxs_machine_init(void)
>  {
>  	if (of_machine_is_compatible("fsl,imx28-evk"))
>  		imx28_evk_init();
>  	else if (of_machine_is_compatible("fsl,imx23-evk"))
>  		imx23_evk_init();
> +	else if (of_machine_is_compatible("denx,m28evk"))
> +		m28evk_init();
> 
>  	of_platform_populate(NULL, of_default_bus_match_table,
>  			     mxs_auxdata_lookup, NULL);
> @@ -223,6 +252,7 @@ static const char *imx23_dt_compat[] __initdata = {
> 
>  static const char *imx28_dt_compat[] __initdata = {
>  	"crystalfontz,cfa10036",
> +	"denx,m28evk",
>  	"fsl,imx28-evk",
>  	"fsl,imx28",
>  	NULL,
Shawn Guo July 9, 2012, 7:27 a.m. UTC | #2 
On Mon, Jul 09, 2012 at 09:10:54AM +0200, Marek Vasut wrote:
> Dear Shawn Guo,
> 
> > From: Marek Vasut <marex@denx.de>
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > ---
> >  arch/arm/boot/dts/imx28.dtsi |   21 ++++
> >  arch/arm/boot/dts/m28evk.dts |  241
> > ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mxs/mach-mxs.c | 
> >  30 +++++
> >  3 files changed, 292 insertions(+), 0 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/m28evk.dts
> [...]
> 
> > +static void __init m28evk_init(void)
> > +{
> > +	update_fec_mac_prop(OUI_DENX);
> 
> You need to start the FEC clock here too, otherwise ethernet won't work. Same 

Which clock? "enet_out"?  We enabled it for imx28-evk, but
I do not know m28evk also needs it, as I haven't seen mach-m28evk.c
enabling any fec clock.  Instead, I saw the following in the old clock
code.

        /*
         * Extra fec clock setting
         * The DENX M28 uses an external clock source
         * and the clock output must not be enabled
         */
        if (!machine_is_m28evk()) {
                reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
                reg &= ~BM_CLKCTRL_ENET_SLEEP;
                reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
                __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
        }

Or you meant other fec clock?

> thing as on mx28evk. And I noticed that on other platforms too, so maybe that 
> should be somehow the other way around -- turn on the ethernet clock by default.
> 
> The rest seems OK. I'll update the .dts file once we get the rest of the stuff 
> in (SPI and i2c).
> 
> btw. is someone converting the mxs-lcd ?
> 
The lcd should be working right now, with the auxdata used.
Marek Vasut July 9, 2012, 7:32 a.m. UTC | #3 
Dear Shawn Guo,

> On Mon, Jul 09, 2012 at 09:10:54AM +0200, Marek Vasut wrote:
> > Dear Shawn Guo,
> > 
> > > From: Marek Vasut <marex@denx.de>
> > > 
> > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > > ---
> > > 
> > >  arch/arm/boot/dts/imx28.dtsi |   21 ++++
> > >  arch/arm/boot/dts/m28evk.dts |  241
> > > 
> > > ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mxs/mach-mxs.c
> > > |
> > > 
> > >  30 +++++
> > >  3 files changed, 292 insertions(+), 0 deletions(-)
> > >  create mode 100644 arch/arm/boot/dts/m28evk.dts
> > 
> > [...]
> > 
> > > +static void __init m28evk_init(void)
> > > +{
> > > +	update_fec_mac_prop(OUI_DENX);
> > 
> > You need to start the FEC clock here too, otherwise ethernet won't work.
> > Same
> 
> Which clock? "enet_out"?  We enabled it for imx28-evk, but
> I do not know m28evk also needs it, as I haven't seen mach-m28evk.c
> enabling any fec clock.  Instead, I saw the following in the old clock
> code.

Well, this for the old revision of the board.

>         /*
>          * Extra fec clock setting
>          * The DENX M28 uses an external clock source
>          * and the clock output must not be enabled
>          */
>         if (!machine_is_m28evk()) {
>                 reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
>                 reg &= ~BM_CLKCTRL_ENET_SLEEP;
>                 reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
>                 __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
>         }
> 
> Or you meant other fec clock?

I mean these enet_out clock, they need to be enabled.

> > thing as on mx28evk. And I noticed that on other platforms too, so maybe
> > that should be somehow the other way around -- turn on the ethernet
> > clock by default.
> > 
> > The rest seems OK. I'll update the .dts file once we get the rest of the
> > stuff in (SPI and i2c).
> > 
> > btw. is someone converting the mxs-lcd ?
> 
> The lcd should be working right now, with the auxdata used.

Sure, but is someone working on the DT variant?

Best regards,
Marek Vasut
Shawn Guo July 9, 2012, 7:42 a.m. UTC | #4 
On Mon, Jul 09, 2012 at 09:32:54AM +0200, Marek Vasut wrote:
> I mean these enet_out clock, they need to be enabled.
> 
Okay.

> Sure, but is someone working on the DT variant?
> 
With this series, you can try mxsfb with DT on m28evk board.  Let me
know if it's not working.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 02e778b..3390607 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -232,6 +232,17 @@ 
 					fsl,pull-up = <0>;
 				};
 
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
+						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -373,6 +384,16 @@ 
 					fsl,pull-up = <0>;
 				};
 
+				pwm3_pins_a: pwm3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/m28evk.dts b/arch/arm/boot/dts/m28evk.dts
new file mode 100644
index 0000000..0c22792
--- /dev/null
+++ b/arch/arm/boot/dts/m28evk.dts
@@ -0,0 +1,241 @@ 
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "DENX M28EVK";
+	compatible = "denx,m28evk", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "bootloader";
+					reg = <0x00000000 0x00300000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "environment";
+					reg = <0x00300000 0x00080000>;
+				};
+
+				partition@2 {
+					label = "redundant-environment";
+					reg = <0x00380000 0x00080000>;
+				};
+
+				partition@3 {
+					label = "kernel";
+					reg = <0x00400000 0x00400000>;
+				};
+
+				partition@4 {
+					label = "filesystem";
+					reg = <0x00800000 0x0f800000>;
+				};
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio3 10 1>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
+						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+						0x3103 /* MX28_PAD_PWM0__GPIO_3_16 */
+						0x3113 /* MX28_PAD_PWM1__GPIO_3_17 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
+						0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				status = "okay";
+			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				status = "okay";
+			};
+
+			can1: can@80034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can1_pins_a>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@0a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+
+				};
+
+				eeprom: eeprom@51 {
+					compatible = "atmel,24c128";
+					reg = <0x51>;
+					pagesize = <32>;
+				};
+
+				rtc: rtc@68 {
+					compatible = "stm,mt41t62";
+					reg = <0x68>;
+				};
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio3 11 0>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user1 {
+			label = "Heartbeat1";
+			gpios = <&gpio3 16 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "Heartbeat2";
+			gpios = <&gpio3 17 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 7bbb961..6bb6db8 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -59,6 +59,23 @@  static struct fb_videomode mx28evk_video_modes[] = {
 	},
 };
 
+static struct fb_videomode m28evk_video_modes[] = {
+	{
+		.name		= "Ampire AM-800480R2TMQW-T01H",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= 30066, /* picosecond (33.26 MHz) */
+		.left_margin	= 0,
+		.right_margin	= 256,
+		.upper_margin	= 0,
+		.lower_margin	= 45,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
+	},
+};
+
 static struct mxsfb_platform_data mxsfb_pdata __initdata;
 
 static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
@@ -203,12 +220,24 @@  static void __init imx28_evk_init(void)
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
 }
 
+static void __init m28evk_init(void)
+{
+	update_fec_mac_prop(OUI_DENX);
+
+	mxsfb_pdata.mode_list = m28evk_video_modes;
+	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
+	mxsfb_pdata.default_bpp = 16;
+	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+}
+
 static void __init mxs_machine_init(void)
 {
 	if (of_machine_is_compatible("fsl,imx28-evk"))
 		imx28_evk_init();
 	else if (of_machine_is_compatible("fsl,imx23-evk"))
 		imx23_evk_init();
+	else if (of_machine_is_compatible("denx,m28evk"))
+		m28evk_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     mxs_auxdata_lookup, NULL);
@@ -223,6 +252,7 @@  static const char *imx23_dt_compat[] __initdata = {
 
 static const char *imx28_dt_compat[] __initdata = {
 	"crystalfontz,cfa10036",
+	"denx,m28evk",
 	"fsl,imx28-evk",
 	"fsl,imx28",
 	NULL,