| Message ID | 20230628092812.1592644-3-thippeswamy.havalige@amd.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | Add support for Xilinx XDMA Soft IP as Root Port. | expand |
On Wed, 28 Jun 2023 14:58:11 +0530, Thippeswamy Havalige wrote: > Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge > dt binding. > > Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > change in v5: > Modified uppercase case hex value to lower case. > change in v4: > - Removed unnecessary space. > changes in v3: > - Fixed compatible string issue. > - Modified ranges property description to maxItems. > - Modified address-cell property of interrupt-controller child node. > changes in v2: > - None > .../bindings/pci/xlnx,xdma-host.yaml | 114 ++++++++++++++++++ > 1 file changed, 114 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic'] Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic'] Documentation/devicetree/bindings/i2c/qcom,i2c-cci.example.dtb: /example-0/cci@ac4a000/i2c-bus@1/camera@60: failed to match any schema with compatible: ['ovti,ov7251'] Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/switch@0: failed to match any schema with compatible: ['marvell,mv88e6190'] Documentation/devicetree/bindings/net/qca,ar71xx.example.dtb: /example-0/ethernet@1a000000/mdio/switch@10: failed to match any schema with compatible: ['qca,ar9331-switch'] Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.example.dtb: /example-0/memory-controller@13410000/ethernet@6: failed to match any schema with compatible: ['davicom,dm9000'] Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.example.dtb: /example-0/iomcu@ffd7e000: failed to match any schema with compatible: ['hisilicon,hi3660-iomcu', 'syscon'] Documentation/devicetree/bindings/leds/common.example.dtb: /example-2/i2c/led-controller@30: failed to match any schema with compatible: ['panasonic,an30259a'] Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar'] Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma'] Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: /example-0/parent/i2c/camera@36: failed to match any schema with compatible: ['ovti,ov5695'] Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart'] Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.example.dtb: /example-0/cpuctrl@a22000/clock@0: failed to match any schema with compatible: ['hisilicon,hix5hd2-clock'] Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy'] Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.example.dtb: /example-0/system-controller@802000/clock@0: failed to match any schema with compatible: ['hisilicon,hi3620-clock'] Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/cpu: failed to match any schema with compatible: ['cpu-driver'] Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/codec: failed to match any schema with compatible: ['codec-driver'] Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.example.dtb: /example-0/pmic@0: failed to match any schema with compatible: ['sprd,sc2731'] Documentation/devicetree/bindings/input/mediatek,pmic-keys.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['mediatek,mt6397'] Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: /example-0/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6q-anatop', 'syscon', 'simple-mfd'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230628092812.1592644-3-thippeswamy.havalige@amd.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, Jun 28, 2023 at 04:18:26AM -0600, Rob Herring wrote: > > On Wed, 28 Jun 2023 14:58:11 +0530, Thippeswamy Havalige wrote: > > Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge > > dt binding. > > > > Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> > > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > change in v5: > > Modified uppercase case hex value to lower case. > > change in v4: > > - Removed unnecessary space. > > changes in v3: > > - Fixed compatible string issue. > > - Modified ranges property description to maxItems. > > - Modified address-cell property of interrupt-controller child node. > > changes in v2: > > - None > > .../bindings/pci/xlnx,xdma-host.yaml | 114 ++++++++++++++++++ > > 1 file changed, 114 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic'] > Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic'] > Documentation/devicetree/bindings/i2c/qcom,i2c-cci.example.dtb: /example-0/cci@ac4a000/i2c-bus@1/camera@60: failed to match any schema with compatible: ['ovti,ov7251'] > Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/switch@0: failed to match any schema with compatible: ['marvell,mv88e6190'] > Documentation/devicetree/bindings/net/qca,ar71xx.example.dtb: /example-0/ethernet@1a000000/mdio/switch@10: failed to match any schema with compatible: ['qca,ar9331-switch'] > Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.example.dtb: /example-0/memory-controller@13410000/ethernet@6: failed to match any schema with compatible: ['davicom,dm9000'] > Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.example.dtb: /example-0/iomcu@ffd7e000: failed to match any schema with compatible: ['hisilicon,hi3660-iomcu', 'syscon'] > Documentation/devicetree/bindings/leds/common.example.dtb: /example-2/i2c/led-controller@30: failed to match any schema with compatible: ['panasonic,an30259a'] > Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar'] > Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma'] > Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: /example-0/parent/i2c/camera@36: failed to match any schema with compatible: ['ovti,ov5695'] > Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd'] > Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart'] > Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.example.dtb: /example-0/cpuctrl@a22000/clock@0: failed to match any schema with compatible: ['hisilicon,hix5hd2-clock'] > Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy'] > Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.example.dtb: /example-0/system-controller@802000/clock@0: failed to match any schema with compatible: ['hisilicon,hi3620-clock'] > Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/cpu: failed to match any schema with compatible: ['cpu-driver'] > Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/codec: failed to match any schema with compatible: ['codec-driver'] > Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.example.dtb: /example-0/pmic@0: failed to match any schema with compatible: ['sprd,sc2731'] > Documentation/devicetree/bindings/input/mediatek,pmic-keys.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['mediatek,mt6397'] > Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd'] > Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: /example-0/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6q-anatop', 'syscon', 'simple-mfd'] This can be ignored. Rob
On Wed, 28 Jun 2023 14:58:11 +0530, Thippeswamy Havalige wrote: > Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge > dt binding. > > Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > change in v5: > Modified uppercase case hex value to lower case. > change in v4: > - Removed unnecessary space. > changes in v3: > - Fixed compatible string issue. > - Modified ranges property description to maxItems. > - Modified address-cell property of interrupt-controller child node. > changes in v2: > - None > .../bindings/pci/xlnx,xdma-host.yaml | 114 ++++++++++++++++++ > 1 file changed, 114 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml > Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml new file mode 100644 index 0000000..0aa00b8 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx XDMA PL PCIe Root Port Bridge + +maintainers: + - Thippeswamy Havalige <thippeswamy.havalige@amd.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: xlnx,xdma-host-3.00 + + reg: + maxItems: 1 + + ranges: + maxItems: 2 + + interrupts: + items: + - description: interrupt asserted when miscellaneous interrupt is received. + - description: msi0 interrupt asserted when an MSI is received. + - description: msi1 interrupt asserted when an MSI is received. + + interrupt-names: + items: + - const: misc + - const: msi0 + - const: msi1 + + interrupt-map-mask: + items: + - const: 0 + - const: 0 + - const: 0 + - const: 7 + + interrupt-map: + maxItems: 4 + + "#interrupt-cells": + const: 1 + + interrupt-controller: + description: identifies the node as an interrupt controller + type: object + properties: + interrupt-controller: true + + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + required: + - interrupt-controller + - "#address-cells" + - "#interrupt-cells" + + additionalProperties: false + +required: + - compatible + - reg + - ranges + - interrupts + - interrupt-map + - interrupt-map-mask + - "#interrupt-cells" + - interrupt-controller + +unevaluatedProperties: false + +examples: + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie@a0000000 { + compatible = "xlnx,xdma-host-3.00"; + reg = <0x0 0xa0000000 0x0 0x10000000>; + ranges = <0x2000000 0x0 0xb0000000 0x0 0xb0000000 0x0 0x1000000>, + <0x43000000 0x5 0x0 0x5 0x0 0x0 0x1000000>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "misc", "msi0", "msi1"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc_0 0>, + <0 0 0 2 &pcie_intc_0 1>, + <0 0 0 3 &pcie_intc_0 2>, + <0 0 0 4 &pcie_intc_0 3>; + pcie_intc_0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + };