diff mbox

drm/i915: Unset cursor if out-of-bounds upon mode change (v2)

Message ID 1278582098-12744-1-git-send-email-chris@chris-wilson.co.uk (mailing list archive)
State Deferred, archived
Headers show

Commit Message

Chris Wilson July 8, 2010, 9:41 a.m. UTC 
None

Comments

Eric Anholt July 8, 2010, 6:27 p.m. UTC | #1 
On Thu, 08 Jul 2010 14:23:26 +0100, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> On Thu, 08 Jul 2010 22:56:34 +1000, Christopher James Halse Rogers <christopher.halse.rogers@canonical.com> wrote:
> > The 965 docs say (vol 3, p142, 147) that CUR?BASE should be written to
> > last when updating any of the cursor regs even if the base value hasn't
> > changed to trigger an update on the next VBLANK.
> > 
> > I'm not sure whether my reading of that documentation is correct,
> > though, because the cursor seemed to update just fine with the code in
> > this patch.
> 
> CUR?POS:
> "This register can be loaded atomically (requires that the base address be
> written) and is double buffered."
> 
> As the code has been previously moving the cursor for many years without
> updating CUR?BASE, I think we are safe.
> -ickle

Cursors are working fine on my system with this patch, but I'll wait for
a resolution on the regression when cursor at top/left.
Chris Wilson July 9, 2010, 7:43 a.m. UTC | #2 
On Thu, 08 Jul 2010 11:27:14 -0700, Eric Anholt <eric@anholt.net> wrote:
> Cursors are working fine on my system with this patch, but I'll wait for
> a resolution on the regression when cursor at top/left.

Eric, you were wise to wait! Christopher found a further issue where the
cursor may come back corrupt...
-ickle
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d3397eb..15a6840 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -42,6 +42,7 @@ 
 bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
 static void intel_update_watermarks(struct drm_device *dev);
 static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule);
+static void intel_crtc_update_cursor(struct drm_crtc *crtc);
 
 typedef struct {
     /* given values */
@@ -3533,6 +3534,9 @@  static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc);
+
 	if (is_lvds && dev_priv->lvds_downclock_avail) {
 		has_reduced_clock = limit->find_pll(limit, crtc,
 							    dev_priv->lvds_downclock,
@@ -4068,6 +4072,81 @@  void intel_crtc_load_lut(struct drm_crtc *crtc)
 	}
 }
 
+/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
+static void intel_crtc_update_cursor(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int x = intel_crtc->cursor_x;
+	int y = intel_crtc->cursor_y;
+	uint32_t base, pos;
+
+	pos = 0;
+
+	if (crtc->fb) {
+		base = intel_crtc->cursor_addr;
+		if (x > crtc->fb->width)
+			base = 0;
+
+		if (y > crtc->fb->height)
+			base = 0;
+	} else
+		base = 0;
+
+	if (x < 0) {
+		if (x + intel_crtc->cursor_width < 0)
+			base = 0;
+
+		pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
+		x = -x;
+	}
+	pos |= x << CURSOR_X_SHIFT;
+
+	if (y < 0) {
+		if (y + intel_crtc->cursor_height < 0)
+			base = 0;
+
+		pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
+		y = -y;
+	}
+	pos |= y << CURSOR_Y_SHIFT;
+
+	if (pos != intel_crtc->cursor_current_pos) {
+		I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, pos);
+		intel_crtc->cursor_current_pos = pos;
+	}
+
+	if (base != intel_crtc->cursor_current_base) {
+		uint32_t cntl = I915_READ((pipe == 0) ? CURACNTR : CURBCNTR);
+		if (base) {
+			intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
+
+			/* Hooray for CUR*CNTR differences */
+			if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+				cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
+				cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+				cntl |= (pipe << 28); /* Connect to correct pipe */
+			} else {
+				cntl &= ~(CURSOR_FORMAT_MASK);
+				cntl |= CURSOR_ENABLE;
+				cntl |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
+			}
+		} else {
+			if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+				cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+				cntl |= CURSOR_MODE_DISABLE;
+			} else {
+				cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
+			}
+		}
+		I915_WRITE((pipe == 0) ? CURACNTR : CURBCNTR, cntl);
+		I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, base);
+		intel_crtc->cursor_current_base = base;
+	}
+}
+
 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 				 struct drm_file *file_priv,
 				 uint32_t handle,
@@ -4078,11 +4157,7 @@  static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_gem_object *bo;
 	struct drm_i915_gem_object *obj_priv;
-	int pipe = intel_crtc->pipe;
-	uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
-	uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
-	uint32_t temp = I915_READ(control);
-	size_t addr;
+	uint32_t addr;
 	int ret;
 
 	DRM_DEBUG_KMS("\n");
@@ -4090,12 +4165,6 @@  static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	/* if we want to turn off the cursor ignore width and height */
 	if (!handle) {
 		DRM_DEBUG_KMS("cursor off\n");
-		if (IS_MOBILE(dev) || IS_I9XX(dev)) {
-			temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
-			temp |= CURSOR_MODE_DISABLE;
-		} else {
-			temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
-		}
 		addr = 0;
 		bo = NULL;
 		mutex_lock(&dev->struct_mutex);
@@ -4137,7 +4206,8 @@  static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 
 		addr = obj_priv->gtt_offset;
 	} else {
-		ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
+		ret = i915_gem_attach_phys_object(dev, bo,
+						  (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
 		if (ret) {
 			DRM_ERROR("failed to attach phys object\n");
 			goto fail_locked;
@@ -4148,21 +4218,7 @@  static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	if (!IS_I9XX(dev))
 		I915_WRITE(CURSIZE, (height << 12) | width);
 
-	/* Hooray for CUR*CNTR differences */
-	if (IS_MOBILE(dev) || IS_I9XX(dev)) {
-		temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
-		temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
-		temp |= (pipe << 28); /* Connect to correct pipe */
-	} else {
-		temp &= ~(CURSOR_FORMAT_MASK);
-		temp |= CURSOR_ENABLE;
-		temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
-	}
-
  finish:
-	I915_WRITE(control, temp);
-	I915_WRITE(base, addr);
-
 	if (intel_crtc->cursor_bo) {
 		if (dev_priv->info->cursor_needs_physical) {
 			if (intel_crtc->cursor_bo != bo)
@@ -4176,6 +4232,10 @@  static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 
 	intel_crtc->cursor_addr = addr;
 	intel_crtc->cursor_bo = bo;
+	intel_crtc->cursor_width = width;
+	intel_crtc->cursor_height = height;
+
+	intel_crtc_update_cursor(crtc);
 
 	return 0;
 fail_unpin:
@@ -4189,34 +4249,12 @@  fail:
 
 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 {
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct intel_framebuffer *intel_fb;
-	int pipe = intel_crtc->pipe;
-	uint32_t temp = 0;
-	uint32_t adder;
-
-	if (crtc->fb) {
-		intel_fb = to_intel_framebuffer(crtc->fb);
-		intel_mark_busy(dev, intel_fb->obj);
-	}
-
-	if (x < 0) {
-		temp |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
-		x = -x;
-	}
-	if (y < 0) {
-		temp |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
-		y = -y;
-	}
 
-	temp |= x << CURSOR_X_SHIFT;
-	temp |= y << CURSOR_Y_SHIFT;
+	intel_crtc->cursor_x = x;
+	intel_crtc->cursor_y = y;
 
-	adder = intel_crtc->cursor_addr;
-	I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
-	I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
+	intel_crtc_update_cursor(crtc);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 77a71a4..22c259f 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -143,8 +143,6 @@  struct intel_crtc {
 	struct drm_crtc base;
 	enum pipe pipe;
 	enum plane plane;
-	struct drm_gem_object *cursor_bo;
-	uint32_t cursor_addr;
 	u8 lut_r[256], lut_g[256], lut_b[256];
 	int dpms_mode;
 	bool busy; /* is scanout buffer being updated frequently? */
@@ -153,6 +151,13 @@  struct intel_crtc {
 	struct intel_overlay *overlay;
 	struct intel_unpin_work *unpin_work;
 	int fdi_lanes;
+
+	struct drm_gem_object *cursor_bo;
+	uint32_t cursor_addr;
+	int16_t cursor_x, cursor_y;
+	int16_t cursor_width, cursor_height;
+	uint32_t cursor_current_base;
+	uint32_t cursor_current_pos;
 };
 
 #define to_intel_crtc(x) container_of(x, struct intel_crtc, base)