diff mbox series

[v1,5/9] dt-bindings: PLDA: Add PLDA XpressRICH PCIe host controller

Message ID 20230719102057.22329-6-minda.chen@starfivetech.com (mailing list archive)
State Handled Elsewhere
Delegated to: Conor Dooley
Headers show
Series Refactoring Microchip PolarFire PCIe driver | expand

Checks

Context Check Description
conchuod/tree_selection fail Failed to apply to next/pending-fixes, riscv/for-next or riscv/master

Commit Message

Minda Chen July 19, 2023, 10:20 a.m. UTC
Add PLDA XpressRICH host controller dt-bindings. Both Microchip
PolarFire SoC and StarFive JH7110 SoC are using PLDA XpressRICH
PCIe host controller IP.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
---
 .../pci/plda,xpressrich-pcie-host.yaml        | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml

Comments

Krzysztof Kozlowski July 19, 2023, 10:55 a.m. UTC | #1
On 19/07/2023 12:20, Minda Chen wrote:
> Add PLDA XpressRICH host controller dt-bindings. Both Microchip
> PolarFire SoC and StarFive JH7110 SoC are using PLDA XpressRICH
> PCIe host controller IP.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  .../pci/plda,xpressrich-pcie-host.yaml        | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
> new file mode 100644
> index 000000000000..10a10862a078
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PLDA XpressRICH PCIe host controller
> +
> +maintainers:
> +  - Daire McNamara <daire.mcnamara@microchip.com>
> +  - Minda Chen <minda.chen@starfivetech.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +  - $ref: plda,xpressrich-pcie-common.yaml#
> +  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: plda,xpressrich-pcie-host
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - "#interrupt-cells"
> +  - interrupts
> +  - interrupt-map-mask
> +  - interrupt-map
> +  - msi-controller

Your common schema should require properties which it defines. Here you
should require only difference or new properties.

> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    soc {
> +            #address-cells = <2>;

Use 4 spaces for example indentation.

> +            #size-cells = <2>;
> +            pcie0: pcie@12000000 {


Best regards,
Krzysztof
Rob Herring July 19, 2023, 10:29 p.m. UTC | #2
On Wed, Jul 19, 2023 at 06:20:53PM +0800, Minda Chen wrote:
> Add PLDA XpressRICH host controller dt-bindings. Both Microchip
> PolarFire SoC and StarFive JH7110 SoC are using PLDA XpressRICH
> PCIe host controller IP.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  .../pci/plda,xpressrich-pcie-host.yaml        | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
> new file mode 100644
> index 000000000000..10a10862a078
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PLDA XpressRICH PCIe host controller
> +
> +maintainers:
> +  - Daire McNamara <daire.mcnamara@microchip.com>
> +  - Minda Chen <minda.chen@starfivetech.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +  - $ref: plda,xpressrich-pcie-common.yaml#
> +  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: plda,xpressrich-pcie-host

What h/w is this in? I don't see why this is needed. You have the common 
schema for the IP block and then the Microchip and Starfive schemas for 
the 2 implementations.

Rob
Minda Chen July 20, 2023, 7:02 a.m. UTC | #3
On 2023/7/20 6:29, Rob Herring wrote:
> On Wed, Jul 19, 2023 at 06:20:53PM +0800, Minda Chen wrote:
>> Add PLDA XpressRICH host controller dt-bindings. Both Microchip
>> PolarFire SoC and StarFive JH7110 SoC are using PLDA XpressRICH
>> PCIe host controller IP.
>> 
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>>  .../pci/plda,xpressrich-pcie-host.yaml        | 66 +++++++++++++++++++
>>  1 file changed, 66 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
>> new file mode 100644
>> index 000000000000..10a10862a078
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
>> @@ -0,0 +1,66 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: PLDA XpressRICH PCIe host controller
>> +
>> +maintainers:
>> +  - Daire McNamara <daire.mcnamara@microchip.com>
>> +  - Minda Chen <minda.chen@starfivetech.com>
>> +
>> +allOf:
>> +  - $ref: /schemas/pci/pci-bus.yaml#
>> +  - $ref: plda,xpressrich-pcie-common.yaml#
>> +  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    const: plda,xpressrich-pcie-host
> 
> What h/w is this in? I don't see why this is needed. You have the common 
> schema for the IP block and then the Microchip and Starfive schemas for 
> the 2 implementations.
> 
> Rob
OK. I will delete this patch and pcie-plda-plat.c
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
new file mode 100644
index 000000000000..10a10862a078
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
@@ -0,0 +1,66 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PLDA XpressRICH PCIe host controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+  - Minda Chen <minda.chen@starfivetech.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: plda,xpressrich-pcie-common.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: plda,xpressrich-pcie-host
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            pcie0: pcie@12000000 {
+                    compatible = "plda,xpressrich-pcie-host";
+                    reg = <0x0 0x12000000 0x0 0x00010000>,
+                          <0x0 0x43000000 0x0 0x00010000>;
+                    reg-names = "host", "cfg";
+                    ranges = <0x03000000 0x0 0x88000000 0x0 0x88000000 0x0 0x04000000>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <131>;
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+                                    <0 0 0 2 &pcie_intc0 1>,
+                                    <0 0 0 3 &pcie_intc0 2>,
+                                    <0 0 0 4 &pcie_intc0 3>;
+                    interrupt-parent = <&plic0>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    bus-range = <0x00 0x7f>;
+
+                    pcie_intc0: interrupt-controller {
+                        #address-cells = <0>;
+                        #interrupt-cells = <1>;
+                        interrupt-controller;
+                    };
+            };
+    };