| Message ID | 20230721101349.12387-1-victorshihgli@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support UHS-II for GL9755 | expand |
On 21/07/23 13:13, Victor Shih wrote: > From: Victor Shih <victor.shih@genesyslogic.com.tw> > > Summary > ======= > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > About UHS-II, roughly deal with the following three parts: > 1) A UHS-II detection and initialization: > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > Sequence[2]). > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > [2]). > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > Setting Register Setup Sequence. > > 2) Send Legacy SD command through SD-TRAN > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > Packet Types and Format Overview[3]). > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > 3) UHS-II Interrupt > - Except for UHS-II error interrupts, most interrupts share the original > interrupt registers. > > Patch structure > =============== > patch#1-#6: for core > patch#7-#22: for sdhci > patch#23: for GL9755 > > Changes in v9 (July. 21, 2023) > * rebased to the linux-kernel-v6.5.0-rc1 in Ulf Hansson next branch. > * according to the comments provided by Adrian Hunter to modify the > patches base on the [V8 00/23] Add support UHS-II for GL9755. > * Patch#2: move sd_uhs2_operation definition of PatchV8[05/23] > to PatchV9[02/23] for avoid compilation errors. > move uhs2_control definition of PatchV8[05/23] > to PatchV9[02/23] for avoid compilation errors. > move mmc_host flags definition of PatchV8[05/23] > to PatchV9[02/23] for avoid compilation errors. > move mmc_host flags MMC_UHS2_SUPPORT definition of > PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. > move mmc_host flags MMC_UHS2_SD_TRAN definition of > PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. > * Patch#7: Modify the commit message. > * Patch#8: Modify the commit message. > * Patch#11: Modify annotations in sdhci_get_vdd_value(). > * Patch#14: Simplity the turning_on_clk in sdhci_set_ios(). > * Patch#18: Modify the annotations in __sdhci_uhs2_send_command(). > * Patch#19: Cancel export state of sdhci_set_mrq_done() function. > * Patch#23: Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init(). > Rename gl9755_uhs2_reset_sd_tran() to > sdhci_gli_uhs2_reset_sd_tran(). > > Reference > ========= > [1] https://gitlab.com/VictorShih/linux-uhs2.git > [2] SD Host Controller Simplified Specification 4.20 > [3] UHS-II Simplified Addendum 1.02 > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230621100151.6329-1-victorshihgli@gmail.com/ > > ----------------- original cover letter from v8 ----------------- > Summary > ======= > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > About UHS-II, roughly deal with the following three parts: > 1) A UHS-II detection and initialization: > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > Sequence[2]). > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > [2]). > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > Setting Register Setup Sequence. > > 2) Send Legacy SD command through SD-TRAN > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > Packet Types and Format Overview[3]). > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > 3) UHS-II Interrupt > - Except for UHS-II error interrupts, most interrupts share the original > interrupt registers. > > Patch structure > =============== > patch#1-#6: for core > patch#7-#22: for sdhci > patch#23: for GL9755 > > Changes in v8 (June. 21, 2023) > * rebased to the linux-kernel-v6.4.0-rc6 in Ulf Hansson next branch. > * fix most of checkpatch warnings/errors. > * according to the comments provided by Adrian Hunter to modify the > patches base on the [V7 00/23] Add support UHS-II for GL9755. > * Patch#6: Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect(). > Modify return value in sd_uhs2_attach(). > * Patch#7: Use tabs instead of spaces. > * Patch#8: Modify MODULE_LICENSE from "GPL v2" to "GPL". > * Patch#10: Adjust the position of matching brackets. > * Patch#11: Adjust the position of matching brackets. > Add the initial value of the pwr in sdhci_uhs2_set_power(). > * Patch#13: Initialization be combined with declaration and realigned > in sdhci_calc_timeout_uhs2(). > Forward declare struct mmc_command in sdhci_uhs2.h. > * Patch#14: Add the judgment formula for MMC_TIMING_SPEED_A_HD, > MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in > __sdhci_uhs2_set_ios(). > Add the switch case for MMC_TIMING_SPEED_A_HD, > MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in > sdhci_get_preset_value(). > mmc_opt_regulator_set_ocr() to instead of > mmc_regulator_set_ocr() in sdhci_uhs2_set_ios(). > * Patch#15: usleep_range() to instead of udelay() in > sdhci_uhs2_interface_detect(). > read_poll_timeout() to instead of read_poll_timeout_atomic() > in sdhci_uhs2_interface_detect(). > Modify return value in sdhci_uhs2_do_detect_init(). > * Patch#16: Remove unnecessary include file. > read_poll_timeout() to instead of read_poll_timeout_atomic() > in sdhci_uhs2_enable_clk(). > Put the comment on the end and put the lines in descending > line length in sdhci_uhs2_enable_clk(). > Modify return value in sdhci_uhs2_enable_clk(). > * Patch#17: Reorder the definitions and lose the parentheses in > sdhci_uhs2_set_config(). > read_poll_timeout() to instead of read_poll_timeout_atomic() > in sdhci_uhs2_check_dormant(). > * Patch#18: Adjust the position of matching brackets in > sdhci_uhs2_send_command_retry(). > Modify CameCase definition in __sdhci_uhs2_finish_command(). > Modify error message in __sdhci_uhs2_finish_command(). > sdhci_uhs2_send_command_retry() to instead of > sdhci_uhs2_send_command() in sdhci_uhs2_request(). > Use sdhci_uhs2_mode() to simplify code in > sdhci_uhs2_request_atomic(). > Add forward declaration for sdhci_send_command(). > * Patch#19: Forward declare struct mmc_request in sdhci_uhs2.h. > Remove forward declaration of sdhci_send_command(). > Use mmc_dev() to simplify code in sdhci_request_done_dma(). > * Patch#20: Change return type to void for __sdhci_uhs2_add_host_v4(). > Remove unused variables in __sdhci_uhs2_add_host_v4(). > * Patch#22: Add config select MMC_SDHCI_UHS2 in Kconfig. > * Patch#23: Use sdhci_get_vdd_value() to simplify code in > gl9755_set_power(). > Use read_poll_timeout_atomic() to simplify code in > sdhci_wait_clock_stable(). > Use read_poll_timeout_atomic() to simplify code in > sdhci_gl9755_reset(). > > Reference > ========= > [1] https://gitlab.com/VictorShih/linux-uhs2.git > [2] SD Host Controller Simplified Specification 4.20 > [3] UHS-II Simplified Addendum 1.02 > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230331105546.13607-1-victor.shih@genesyslogic.com.tw/ > > ----------------- original cover letter from v7 ----------------- > Summary > ======= > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > About UHS-II, roughly deal with the following three parts: > 1) A UHS-II detection and initialization: > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > [2]). > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > Setup Sequence. > > 2) Send Legacy SD command through SD-TRAN > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > Types and Format Overview[3]). > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > 3) UHS-II Interrupt > - Except for UHS-II error interrupts, most interrupts share the original > interrupt registers. > > Patch structure > =============== > patch#1-#6: for core > patch#7-#22: for sdhci > patch#23: for GL9755 For patches 7 - 23: Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Hi, Ulf Excuse me, may I know the patch's status? If you already have a closer look at a paragraph in the series, could you let me know your comments first, let me check it first. I look forward to your reply. Thanks, Victor Shih On Mon, Jul 31, 2023 at 11:29 PM Adrian Hunter <adrian.hunter@intel.com> wrote: > > On 21/07/23 13:13, Victor Shih wrote: > > From: Victor Shih <victor.shih@genesyslogic.com.tw> > > > > Summary > > ======= > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > About UHS-II, roughly deal with the following three parts: > > 1) A UHS-II detection and initialization: > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > Sequence[2]). > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > [2]). > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > Setting Register Setup Sequence. > > > > 2) Send Legacy SD command through SD-TRAN > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > Packet Types and Format Overview[3]). > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > 3) UHS-II Interrupt > > - Except for UHS-II error interrupts, most interrupts share the original > > interrupt registers. > > > > Patch structure > > =============== > > patch#1-#6: for core > > patch#7-#22: for sdhci > > patch#23: for GL9755 > > > > Changes in v9 (July. 21, 2023) > > * rebased to the linux-kernel-v6.5.0-rc1 in Ulf Hansson next branch. > > * according to the comments provided by Adrian Hunter to modify the > > patches base on the [V8 00/23] Add support UHS-II for GL9755. > > * Patch#2: move sd_uhs2_operation definition of PatchV8[05/23] > > to PatchV9[02/23] for avoid compilation errors. > > move uhs2_control definition of PatchV8[05/23] > > to PatchV9[02/23] for avoid compilation errors. > > move mmc_host flags definition of PatchV8[05/23] > > to PatchV9[02/23] for avoid compilation errors. > > move mmc_host flags MMC_UHS2_SUPPORT definition of > > PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. > > move mmc_host flags MMC_UHS2_SD_TRAN definition of > > PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. > > * Patch#7: Modify the commit message. > > * Patch#8: Modify the commit message. > > * Patch#11: Modify annotations in sdhci_get_vdd_value(). > > * Patch#14: Simplity the turning_on_clk in sdhci_set_ios(). > > * Patch#18: Modify the annotations in __sdhci_uhs2_send_command(). > > * Patch#19: Cancel export state of sdhci_set_mrq_done() function. > > * Patch#23: Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init(). > > Rename gl9755_uhs2_reset_sd_tran() to > > sdhci_gli_uhs2_reset_sd_tran(). > > > > Reference > > ========= > > [1] https://gitlab.com/VictorShih/linux-uhs2.git > > [2] SD Host Controller Simplified Specification 4.20 > > [3] UHS-II Simplified Addendum 1.02 > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230621100151.6329-1-victorshihgli@gmail.com/ > > > > ----------------- original cover letter from v8 ----------------- > > Summary > > ======= > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > About UHS-II, roughly deal with the following three parts: > > 1) A UHS-II detection and initialization: > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > Sequence[2]). > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > [2]). > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > Setting Register Setup Sequence. > > > > 2) Send Legacy SD command through SD-TRAN > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > Packet Types and Format Overview[3]). > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > 3) UHS-II Interrupt > > - Except for UHS-II error interrupts, most interrupts share the original > > interrupt registers. > > > > Patch structure > > =============== > > patch#1-#6: for core > > patch#7-#22: for sdhci > > patch#23: for GL9755 > > > > Changes in v8 (June. 21, 2023) > > * rebased to the linux-kernel-v6.4.0-rc6 in Ulf Hansson next branch. > > * fix most of checkpatch warnings/errors. > > * according to the comments provided by Adrian Hunter to modify the > > patches base on the [V7 00/23] Add support UHS-II for GL9755. > > * Patch#6: Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect(). > > Modify return value in sd_uhs2_attach(). > > * Patch#7: Use tabs instead of spaces. > > * Patch#8: Modify MODULE_LICENSE from "GPL v2" to "GPL". > > * Patch#10: Adjust the position of matching brackets. > > * Patch#11: Adjust the position of matching brackets. > > Add the initial value of the pwr in sdhci_uhs2_set_power(). > > * Patch#13: Initialization be combined with declaration and realigned > > in sdhci_calc_timeout_uhs2(). > > Forward declare struct mmc_command in sdhci_uhs2.h. > > * Patch#14: Add the judgment formula for MMC_TIMING_SPEED_A_HD, > > MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in > > __sdhci_uhs2_set_ios(). > > Add the switch case for MMC_TIMING_SPEED_A_HD, > > MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in > > sdhci_get_preset_value(). > > mmc_opt_regulator_set_ocr() to instead of > > mmc_regulator_set_ocr() in sdhci_uhs2_set_ios(). > > * Patch#15: usleep_range() to instead of udelay() in > > sdhci_uhs2_interface_detect(). > > read_poll_timeout() to instead of read_poll_timeout_atomic() > > in sdhci_uhs2_interface_detect(). > > Modify return value in sdhci_uhs2_do_detect_init(). > > * Patch#16: Remove unnecessary include file. > > read_poll_timeout() to instead of read_poll_timeout_atomic() > > in sdhci_uhs2_enable_clk(). > > Put the comment on the end and put the lines in descending > > line length in sdhci_uhs2_enable_clk(). > > Modify return value in sdhci_uhs2_enable_clk(). > > * Patch#17: Reorder the definitions and lose the parentheses in > > sdhci_uhs2_set_config(). > > read_poll_timeout() to instead of read_poll_timeout_atomic() > > in sdhci_uhs2_check_dormant(). > > * Patch#18: Adjust the position of matching brackets in > > sdhci_uhs2_send_command_retry(). > > Modify CameCase definition in __sdhci_uhs2_finish_command(). > > Modify error message in __sdhci_uhs2_finish_command(). > > sdhci_uhs2_send_command_retry() to instead of > > sdhci_uhs2_send_command() in sdhci_uhs2_request(). > > Use sdhci_uhs2_mode() to simplify code in > > sdhci_uhs2_request_atomic(). > > Add forward declaration for sdhci_send_command(). > > * Patch#19: Forward declare struct mmc_request in sdhci_uhs2.h. > > Remove forward declaration of sdhci_send_command(). > > Use mmc_dev() to simplify code in sdhci_request_done_dma(). > > * Patch#20: Change return type to void for __sdhci_uhs2_add_host_v4(). > > Remove unused variables in __sdhci_uhs2_add_host_v4(). > > * Patch#22: Add config select MMC_SDHCI_UHS2 in Kconfig. > > * Patch#23: Use sdhci_get_vdd_value() to simplify code in > > gl9755_set_power(). > > Use read_poll_timeout_atomic() to simplify code in > > sdhci_wait_clock_stable(). > > Use read_poll_timeout_atomic() to simplify code in > > sdhci_gl9755_reset(). > > > > Reference > > ========= > > [1] https://gitlab.com/VictorShih/linux-uhs2.git > > [2] SD Host Controller Simplified Specification 4.20 > > [3] UHS-II Simplified Addendum 1.02 > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230331105546.13607-1-victor.shih@genesyslogic.com.tw/ > > > > ----------------- original cover letter from v7 ----------------- > > Summary > > ======= > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > About UHS-II, roughly deal with the following three parts: > > 1) A UHS-II detection and initialization: > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > [2]). > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > Setup Sequence. > > > > 2) Send Legacy SD command through SD-TRAN > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > Types and Format Overview[3]). > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > 3) UHS-II Interrupt > > - Except for UHS-II error interrupts, most interrupts share the original > > interrupt registers. > > > > Patch structure > > =============== > > patch#1-#6: for core > > patch#7-#22: for sdhci > > patch#23: for GL9755 > > For patches 7 - 23: > > Acked-by: Adrian Hunter <adrian.hunter@intel.com> >
On Fri, Aug 4, 2023 at 6:10 PM Victor Shih <victorshihgli@gmail.com> wrote: > > Hi, Ulf > > Excuse me, may I know the patch's status? > > If you already have a closer look at a paragraph in the series, > could you let me know your comments first, let me check it first. > > I look forward to your reply. > > Thanks, Victor Shih > > On Mon, Jul 31, 2023 at 11:29 PM Adrian Hunter <adrian.hunter@intel.com> wrote: > > > > On 21/07/23 13:13, Victor Shih wrote: > > > From: Victor Shih <victor.shih@genesyslogic.com.tw> > > > > > > Summary > > > ======= > > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > > > About UHS-II, roughly deal with the following three parts: > > > 1) A UHS-II detection and initialization: > > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > > Sequence[2]). > > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > > [2]). > > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > > Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > > Setting Register Setup Sequence. > > > > > > 2) Send Legacy SD command through SD-TRAN > > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > > SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > > Packet Types and Format Overview[3]). > > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > > > 3) UHS-II Interrupt > > > - Except for UHS-II error interrupts, most interrupts share the original > > > interrupt registers. > > > > > > Patch structure > > > =============== > > > patch#1-#6: for core > > > patch#7-#22: for sdhci > > > patch#23: for GL9755 > > > > > > Changes in v9 (July. 21, 2023) > > > * rebased to the linux-kernel-v6.5.0-rc1 in Ulf Hansson next branch. > > > * according to the comments provided by Adrian Hunter to modify the > > > patches base on the [V8 00/23] Add support UHS-II for GL9755. > > > * Patch#2: move sd_uhs2_operation definition of PatchV8[05/23] > > > to PatchV9[02/23] for avoid compilation errors. > > > move uhs2_control definition of PatchV8[05/23] > > > to PatchV9[02/23] for avoid compilation errors. > > > move mmc_host flags definition of PatchV8[05/23] > > > to PatchV9[02/23] for avoid compilation errors. > > > move mmc_host flags MMC_UHS2_SUPPORT definition of > > > PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. > > > move mmc_host flags MMC_UHS2_SD_TRAN definition of > > > PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. > > > * Patch#7: Modify the commit message. > > > * Patch#8: Modify the commit message. > > > * Patch#11: Modify annotations in sdhci_get_vdd_value(). > > > * Patch#14: Simplity the turning_on_clk in sdhci_set_ios(). > > > * Patch#18: Modify the annotations in __sdhci_uhs2_send_command(). > > > * Patch#19: Cancel export state of sdhci_set_mrq_done() function. > > > * Patch#23: Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init(). > > > Rename gl9755_uhs2_reset_sd_tran() to > > > sdhci_gli_uhs2_reset_sd_tran(). > > > > > > Reference > > > ========= > > > [1] https://gitlab.com/VictorShih/linux-uhs2.git > > > [2] SD Host Controller Simplified Specification 4.20 > > > [3] UHS-II Simplified Addendum 1.02 > > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230621100151.6329-1-victorshihgli@gmail.com/ > > > > > > ----------------- original cover letter from v8 ----------------- > > > Summary > > > ======= > > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > > > About UHS-II, roughly deal with the following three parts: > > > 1) A UHS-II detection and initialization: > > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > > Sequence[2]). > > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > > [2]). > > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > > Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > > Setting Register Setup Sequence. > > > > > > 2) Send Legacy SD command through SD-TRAN > > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > > SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > > Packet Types and Format Overview[3]). > > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > > > 3) UHS-II Interrupt > > > - Except for UHS-II error interrupts, most interrupts share the original > > > interrupt registers. > > > > > > Patch structure > > > =============== > > > patch#1-#6: for core > > > patch#7-#22: for sdhci > > > patch#23: for GL9755 > > > > > > Changes in v8 (June. 21, 2023) > > > * rebased to the linux-kernel-v6.4.0-rc6 in Ulf Hansson next branch. > > > * fix most of checkpatch warnings/errors. > > > * according to the comments provided by Adrian Hunter to modify the > > > patches base on the [V7 00/23] Add support UHS-II for GL9755. > > > * Patch#6: Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect(). > > > Modify return value in sd_uhs2_attach(). > > > * Patch#7: Use tabs instead of spaces. > > > * Patch#8: Modify MODULE_LICENSE from "GPL v2" to "GPL". > > > * Patch#10: Adjust the position of matching brackets. > > > * Patch#11: Adjust the position of matching brackets. > > > Add the initial value of the pwr in sdhci_uhs2_set_power(). > > > * Patch#13: Initialization be combined with declaration and realigned > > > in sdhci_calc_timeout_uhs2(). > > > Forward declare struct mmc_command in sdhci_uhs2.h. > > > * Patch#14: Add the judgment formula for MMC_TIMING_SPEED_A_HD, > > > MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in > > > __sdhci_uhs2_set_ios(). > > > Add the switch case for MMC_TIMING_SPEED_A_HD, > > > MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in > > > sdhci_get_preset_value(). > > > mmc_opt_regulator_set_ocr() to instead of > > > mmc_regulator_set_ocr() in sdhci_uhs2_set_ios(). > > > * Patch#15: usleep_range() to instead of udelay() in > > > sdhci_uhs2_interface_detect(). > > > read_poll_timeout() to instead of read_poll_timeout_atomic() > > > in sdhci_uhs2_interface_detect(). > > > Modify return value in sdhci_uhs2_do_detect_init(). > > > * Patch#16: Remove unnecessary include file. > > > read_poll_timeout() to instead of read_poll_timeout_atomic() > > > in sdhci_uhs2_enable_clk(). > > > Put the comment on the end and put the lines in descending > > > line length in sdhci_uhs2_enable_clk(). > > > Modify return value in sdhci_uhs2_enable_clk(). > > > * Patch#17: Reorder the definitions and lose the parentheses in > > > sdhci_uhs2_set_config(). > > > read_poll_timeout() to instead of read_poll_timeout_atomic() > > > in sdhci_uhs2_check_dormant(). > > > * Patch#18: Adjust the position of matching brackets in > > > sdhci_uhs2_send_command_retry(). > > > Modify CameCase definition in __sdhci_uhs2_finish_command(). > > > Modify error message in __sdhci_uhs2_finish_command(). > > > sdhci_uhs2_send_command_retry() to instead of > > > sdhci_uhs2_send_command() in sdhci_uhs2_request(). > > > Use sdhci_uhs2_mode() to simplify code in > > > sdhci_uhs2_request_atomic(). > > > Add forward declaration for sdhci_send_command(). > > > * Patch#19: Forward declare struct mmc_request in sdhci_uhs2.h. > > > Remove forward declaration of sdhci_send_command(). > > > Use mmc_dev() to simplify code in sdhci_request_done_dma(). > > > * Patch#20: Change return type to void for __sdhci_uhs2_add_host_v4(). > > > Remove unused variables in __sdhci_uhs2_add_host_v4(). > > > * Patch#22: Add config select MMC_SDHCI_UHS2 in Kconfig. > > > * Patch#23: Use sdhci_get_vdd_value() to simplify code in > > > gl9755_set_power(). > > > Use read_poll_timeout_atomic() to simplify code in > > > sdhci_wait_clock_stable(). > > > Use read_poll_timeout_atomic() to simplify code in > > > sdhci_gl9755_reset(). > > > > > > Reference > > > ========= > > > [1] https://gitlab.com/VictorShih/linux-uhs2.git > > > [2] SD Host Controller Simplified Specification 4.20 > > > [3] UHS-II Simplified Addendum 1.02 > > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230331105546.13607-1-victor.shih@genesyslogic.com.tw/ > > > > > > ----------------- original cover letter from v7 ----------------- > > > Summary > > > ======= > > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > > > > > About UHS-II, roughly deal with the following three parts: > > > 1) A UHS-II detection and initialization: > > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > > [2]). > > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > > 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > > Setup Sequence. > > > > > > 2) Send Legacy SD command through SD-TRAN > > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > > compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > > Types and Format Overview[3]). > > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > > > 3) UHS-II Interrupt > > > - Except for UHS-II error interrupts, most interrupts share the original > > > interrupt registers. > > > > > > Patch structure > > > =============== > > > patch#1-#6: for core > > > patch#7-#22: for sdhci > > > patch#23: for GL9755 > > > > For patches 7 - 23: > > > > Acked-by: Adrian Hunter <adrian.hunter@intel.com> > > Hi, Adrian For some reason, I will slightly modify 3 patches in V10, please help to review again. PatchV10[11/23]: Move some definitions of PatchV9[05/23] to PatchV10[11/23] PatchV10[18/23]: Use tmode_half_duplex to instead of uhs2_tmode0_flag in sdhci_uhs2_set_transfer_mode(). PatchV10[20/23]: Move some definitions of PatchV9[05/23] to PatchV10[20/23] Thanks, Victor Shih
From: Victor Shih <victor.shih@genesyslogic.com.tw> Summary ======= These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. About UHS-II, roughly deal with the following three parts: 1) A UHS-II detection and initialization: - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence[2]). - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence [2]). - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence. 2) Send Legacy SD command through SD-TRAN - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]). - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). 3) UHS-II Interrupt - Except for UHS-II error interrupts, most interrupts share the original interrupt registers. Patch structure =============== patch#1-#6: for core patch#7-#22: for sdhci patch#23: for GL9755 Changes in v9 (July. 21, 2023) * rebased to the linux-kernel-v6.5.0-rc1 in Ulf Hansson next branch. * according to the comments provided by Adrian Hunter to modify the patches base on the [V8 00/23] Add support UHS-II for GL9755. * Patch#2: move sd_uhs2_operation definition of PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. move uhs2_control definition of PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. move mmc_host flags definition of PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. move mmc_host flags MMC_UHS2_SUPPORT definition of PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. move mmc_host flags MMC_UHS2_SD_TRAN definition of PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. * Patch#7: Modify the commit message. * Patch#8: Modify the commit message. * Patch#11: Modify annotations in sdhci_get_vdd_value(). * Patch#14: Simplity the turning_on_clk in sdhci_set_ios(). * Patch#18: Modify the annotations in __sdhci_uhs2_send_command(). * Patch#19: Cancel export state of sdhci_set_mrq_done() function. * Patch#23: Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init(). Rename gl9755_uhs2_reset_sd_tran() to sdhci_gli_uhs2_reset_sd_tran(). Reference ========= [1] https://gitlab.com/VictorShih/linux-uhs2.git [2] SD Host Controller Simplified Specification 4.20 [3] UHS-II Simplified Addendum 1.02 [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230621100151.6329-1-victorshihgli@gmail.com/ ----------------- original cover letter from v8 ----------------- Summary ======= These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. About UHS-II, roughly deal with the following three parts: 1) A UHS-II detection and initialization: - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence[2]). - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence [2]). - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence. 2) Send Legacy SD command through SD-TRAN - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]). - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). 3) UHS-II Interrupt - Except for UHS-II error interrupts, most interrupts share the original interrupt registers. Patch structure =============== patch#1-#6: for core patch#7-#22: for sdhci patch#23: for GL9755 Changes in v8 (June. 21, 2023) * rebased to the linux-kernel-v6.4.0-rc6 in Ulf Hansson next branch. * fix most of checkpatch warnings/errors. * according to the comments provided by Adrian Hunter to modify the patches base on the [V7 00/23] Add support UHS-II for GL9755. * Patch#6: Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect(). Modify return value in sd_uhs2_attach(). * Patch#7: Use tabs instead of spaces. * Patch#8: Modify MODULE_LICENSE from "GPL v2" to "GPL". * Patch#10: Adjust the position of matching brackets. * Patch#11: Adjust the position of matching brackets. Add the initial value of the pwr in sdhci_uhs2_set_power(). * Patch#13: Initialization be combined with declaration and realigned in sdhci_calc_timeout_uhs2(). Forward declare struct mmc_command in sdhci_uhs2.h. * Patch#14: Add the judgment formula for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in __sdhci_uhs2_set_ios(). Add the switch case for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in sdhci_get_preset_value(). mmc_opt_regulator_set_ocr() to instead of mmc_regulator_set_ocr() in sdhci_uhs2_set_ios(). * Patch#15: usleep_range() to instead of udelay() in sdhci_uhs2_interface_detect(). read_poll_timeout() to instead of read_poll_timeout_atomic() in sdhci_uhs2_interface_detect(). Modify return value in sdhci_uhs2_do_detect_init(). * Patch#16: Remove unnecessary include file. read_poll_timeout() to instead of read_poll_timeout_atomic() in sdhci_uhs2_enable_clk(). Put the comment on the end and put the lines in descending line length in sdhci_uhs2_enable_clk(). Modify return value in sdhci_uhs2_enable_clk(). * Patch#17: Reorder the definitions and lose the parentheses in sdhci_uhs2_set_config(). read_poll_timeout() to instead of read_poll_timeout_atomic() in sdhci_uhs2_check_dormant(). * Patch#18: Adjust the position of matching brackets in sdhci_uhs2_send_command_retry(). Modify CameCase definition in __sdhci_uhs2_finish_command(). Modify error message in __sdhci_uhs2_finish_command(). sdhci_uhs2_send_command_retry() to instead of sdhci_uhs2_send_command() in sdhci_uhs2_request(). Use sdhci_uhs2_mode() to simplify code in sdhci_uhs2_request_atomic(). Add forward declaration for sdhci_send_command(). * Patch#19: Forward declare struct mmc_request in sdhci_uhs2.h. Remove forward declaration of sdhci_send_command(). Use mmc_dev() to simplify code in sdhci_request_done_dma(). * Patch#20: Change return type to void for __sdhci_uhs2_add_host_v4(). Remove unused variables in __sdhci_uhs2_add_host_v4(). * Patch#22: Add config select MMC_SDHCI_UHS2 in Kconfig. * Patch#23: Use sdhci_get_vdd_value() to simplify code in gl9755_set_power(). Use read_poll_timeout_atomic() to simplify code in sdhci_wait_clock_stable(). Use read_poll_timeout_atomic() to simplify code in sdhci_gl9755_reset(). Reference ========= [1] https://gitlab.com/VictorShih/linux-uhs2.git [2] SD Host Controller Simplified Specification 4.20 [3] UHS-II Simplified Addendum 1.02 [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230331105546.13607-1-victor.shih@genesyslogic.com.tw/ ----------------- original cover letter from v7 ----------------- Summary ======= These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. About UHS-II, roughly deal with the following three parts: 1) A UHS-II detection and initialization: - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]). - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence. 2) Send Legacy SD command through SD-TRAN - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]). - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). 3) UHS-II Interrupt - Except for UHS-II error interrupts, most interrupts share the original interrupt registers. Patch structure =============== patch#1-#6: for core patch#7-#22: for sdhci patch#23: for GL9755 Changes in v7 (Mar. 31, 2023) * rebased to the linux-kernel-v6.3.0-rc3 in Ulf Hansson next branch. * according to the guidance and overall architecture provided by Ulf Hansson, Ben Chuang and Jason Lai to implement the UHS-2 Core function based on the patches of the [V4,0/6] Preparations to support SD UHS-II cards[5]. * according to the guidance and comments provided by Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement the UHS-2 Host function based on the patches of the [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. * implement the necessary function to let the UHS-2 Core/Host work properly. * fix most of checkpatch warnings/errors. * according to the guidance and comments provided by Adrian Hunter, Ben Chuang to implement the UHS-2 Host function based on the patches of the [V5,00/26] Add support UHS-II for GL9755[6]. * according to the guidance and comments provided by Ulf Hanssion, Adrian Hunter, Ben Chuang to implement the UHS-2 Host function based on the patches of the [V6,00/24] Add support UHS-II for GL9755[7]. * The uhs2_post_attach_sd() function is no longer needed so drop the V6 version of the Patch#22. * Modifies the usage of the flags used by the sdhci host for MMC_UHS2_INITIALIZED. * Patch#1: Drop unnecessary bracket. * Patch#2: Drop sd_uhs2_set_ios function. Used ->uhs2_control() callback for uhs2_set_ios in sd_uhs2_power_up(). Used ->uhs2_control() callback for uhs2_set_ios in sd_uhs2_power_off(). Drop MMC_TIMING_SD_UHS2 in favor of MMC_TIMING_UHS2_SPEED_A. Modify sd_uhs2_legacy_init to avoid the sd_uhs2_reinit cycle issue. * Patch#5: Drop unnecessary definitions. * Patch#6: Drop unnecessary function. Drop uhs2_state in favor of ios->timing. * Patch#7: Reorder values and positions of definitions. * Patch#9: Used sdhci_uhs2_mode function to simplify. * Patch#11: Drop pwr variable in sdhci_uhs2_set_power function. * Patch#14: Modify some descriptions. Drop unnecessary function. * Patch#15: Drop using uhs2_reset ops and use sdhci_uhs2_reset function in the sdhci_do_detect_init function. * Patch#17: Drop unnecessary function. * Patch#18: Drop unnecessary whitespace changes. Cancel the export state of some functions. * Patch#19: Drop unnecessary function. Used sdhci_uhs2_mode function to simplify. Modify some descriptions. Cancel the export state of some functions. * Patch#20: Drop using __sdhci_uhs2_host function and use __sdhci_add_host function in sdhci_uhs2_add_host function. Cancel the export state of some functions. * Patch#23: Drop using uhs2_post_attach_sd function. Reference ========= [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git [2] SD Host Controller Simplified Specification 4.20 [3] UHS-II Simplified Addendum 1.02 [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@genesyslogic.com.tw/ [7] https://patchwork.kernel.org/project/linux-mmc/cover/20221213090047.3805-1-victor.shih@genesyslogic.com.tw/ ----------------- original cover letter from v6 ----------------- Summary ======= These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. About UHS-II, roughly deal with the following three parts: 1) A UHS-II detection and initialization: - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]). - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence. 2) Send Legacy SD command through SD-TRAN - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]). - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). 3) UHS-II Interrupt - Except for UHS-II error interrupts, most interrupts share the original interrupt registers. Patch structure =============== patch#1-#6: for core patch#7-#23: for sdhci patch#24: for GL9755 Changes in v6 (Dec. 12, 2022) * rebased to the linux-kernel-v6.1.0-rc8 in Ulf Hansson next branch. * according to the guidance and overall architecture provided by Ulf Hansson, Ben Chuang and Jason Lai to implement the UHS-2 Core function based on the patches of the [V4,0/6] Preparations to support SD UHS-II cards[5]. * according to the guidance and comments provided by Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement the UHS-2 Host function based on the patches of the [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. * implement the necessary function to let the UHS-2 Core/Host work properly. * fix most of checkpatch warnings/errors. * according to the guidance and comments provided by Adrian Hunter, Ben Chuang to implement the UHS-2 Host function based on the patches of the [V5,00/26] Add support UHS-II for GL9755[6]. * The uhs2_post_attach_sd() has implemented in Patch#6 and Patch#17 so drop the V5 version of the Patch#23. * Modifies the usage of the flags used by the sdhci host for MMC_UHS2_INITIALIZED. * Patch#5: Drop unused definitions and functions. * Patch#7: Rename definitions. Use BIT() GENMASK() in some cases. * Patch#8: Merge V5 version of Patch[7] and Patch[9] into V6 version of Patch[8]. * Patch#9: Drop unnecessary function. Rename used definitions. * Patch#10: Drop unnecessary function and simplify some code. * Patch#11: Drop unnecessary function. Add new mmc_opt_regulator_set_ocr function. * Patch#13: Drop unnecessary function. Use GENMASK() and FIELD_PREP() in some cases. * Patch#14: Drop unnecessary function. Modify return value in some function. Use GENMASK() and FIELD_PREP() in some cases. * Patch#15: Drop unnecessary function. Rename used definitions. Use GENMASK() and FIELD_GET() in some cases. Wrap at 100 columns in some functions. * Patch#16: Drop unnecessary function. * Patch#17: Drop unnecessary function. Drop the unnecessary parameter when call the DBG() function. Rename used definitions. Cancel the export state of some functions. Use GENMASK() and FIELD_PREP() in some cases. * Patch#18: Drop unnecessary function. Add uhs2_dev_cmd function to simplify some functions. Rename used definitions. Cancel the export state of some functions. Use GENMASK() and FIELD_PREP() in some cases. * Patch#19: Drop unnecessary function. Add sdhci_uhs2_mode() in some functions. Rename used definitions. Cancel the export state of some functions. * Patch#20: Add new complete_work_fn/thread_irq_fn variables in struct sdhci_host. Use complete_work_fn/thread_irq_fn variables in sdhci_alloc_host()/sdhci_uhs2_add_host(). Rename used definitions. * Patch[24]: Rename used definitions. Reference ========= [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git [2] SD Host Controller Simplified Specification 4.20 [3] UHS-II Simplified Addendum 1.02 [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@genesyslogic.com.tw/ ----------------- original cover letter from v5 ----------------- Summary ======= These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. About UHS-II, roughly deal with the following three parts: 1) A UHS-II detection and initialization: - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]). - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence. 2) Send Legacy SD command through SD-TRAN - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]). - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). 3) UHS-II Interrupt - Except for UHS-II error interrupts, most interrupts share the original interrupt registers. Patch structure =============== patch#1-#6: for core patch#7-#25: for sdhci patch#26: for GL9755 Changes in v5 (Oct. 19, 2022) * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch. * according to the guidance and overall architecture provided by Ulf Hansson, Ben Chuang and Jason Lai to implement the UHS-2 Core function based on the patches of the [V4,0/6] Preparations to support SD UHS-II cards[5]. * according to the guidance and comments provided by Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement the UHS-2 Host function based on the patches of the [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. * implement the necessary function to let the UHS-2 Core/Host work properly. * fix most of checkpatch warnings/errors Reference ========= [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git [2] SD Host Controller Simplified Specification 4.20 [3] UHS-II Simplified Addendum 1.02 [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ ----------------- original cover letter from v3.1 ----------------- This is an interim snapshot of our next version, v4, for enabling UHS-II on MMC/SD. It is focused on 'sdhci' side to address Adrian's comments regarding "modularising" sdhci-uhs2.c. The whole aim of this version is to get early feedback from Adrian (and others) on this issue. Without any consensus about the code structure, it would make little sense to go further ahead on sdhci side. (Actually, Adrian has made no comments other than "modularising" so far.) I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch set to meet what I believe Adrian expects; no UHS-II related code in Legacy (UHS-I) code or sdhci.c. Nevertheless, almost of all changes I made are trivial and straightforward in this direction, and I believe that there is no logic changed since v3 except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II command sequences in addition to UHS-II errors. So I added extra handlings. I admit that there is plenty of room for improvements (for example, handling host->flags), but again the focal point here is how sdhci-uhs2.c should be built as a module. Please review this series (particularly Patch#8-#26 and #27) from this viewpoint in the first place. (Ben is working on 'host' side but there is no change on 'host' side in this submission except a minor tweak.) Thanks, -Takahiro Akashi ------ original cover letter from v3 ------ Summary ======= These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. About UHS-II, roughly deal with the following three parts: 1) A UHS-II detection and initialization: - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]). - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence. 2) Send Legacy SD command through SD-TRAN - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]). - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). 3) UHS-II Interrupt - Except for UHS-II error interrupts, most interrupts share the original interrupt registers. Patch structure =============== patch#1-#7: for core patch#8-#17: for sdhci patch#18-#21: for GL9755 Tests ===== Ran 'dd' command to evaluate the performance: (SanDisk UHS-II card on GL9755 controller) Read Write UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s UHS-II enabled : 206MB/s 80MB/s TODO ==== - replace some define with BIT macro Reference ========= [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git [2] SD Host Controller Simplified Specification 4.20 [3] UHS-II Simplified Addendum 1.02 Changes in v3 (Jul. 10, 2020) * rebased to v5.8-rc4 * add copyright notice * reorganize the patch set and split some commits into smaller ones * separate uhs-2 headers from others * correct wrong spellings * fix most of checkpatch warnings/errors * remove all k[cz]alloc() from the code * guard sdhci-uhs2 specific code with 'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))' * make sdhci-uhs2.c as a module * trivial changes, including - rename back sdhci-core.c to sdhci.c - allow vendor code to disable uhs2 if v4_mode == 0 in __sdhci_add_host() - merge uhs2_power_up() into mmc_power_up() - remove flag_uhs2 from mmc_attach_sd() - add function descriptions to EXPORT'ed functions - other minor code optimization Changes in v2 (Jan. 9, 2020) * rebased to v5.5-rc5 Ben Chuang (1): mmc: sdhci-uhs2: add pre-detect_init hook Ulf Hansson (2): mmc: core: Cleanup printing of speed mode at card insertion mmc: core: Extend support for mmc regulators with a vqmmc2 Victor Shih (20): mmc: core: Prepare to support SD UHS-II cards mmc: core: Announce successful insertion of an SD UHS-II card mmc: core: Add definitions for SD UHS-II cards mmc: core: Support UHS-II card control and access mmc: sdhci: add UHS-II related definitions in headers mmc: sdhci: add UHS-II module and add a kernel configuration mmc: sdhci-uhs2: dump UHS-II registers mmc: sdhci-uhs2: add reset function and uhs2_mode function mmc: sdhci-uhs2: add set_power() to support vdd2 mmc: sdhci-uhs2: skip signal_voltage_switch() mmc: sdhci-uhs2: add set_timeout() mmc: sdhci-uhs2: add set_ios() mmc: sdhci-uhs2: add detect_init() to detect the interface mmc: sdhci-uhs2: add clock operations mmc: sdhci-uhs2: add uhs2_control() to initialise the interface mmc: sdhci-uhs2: add request() and others mmc: sdhci-uhs2: add irq() and others mmc: sdhci-uhs2: add add_host() and others to set up the driver mmc: sdhci-pci: add UHS-II support framework mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 drivers/mmc/core/Makefile | 2 +- drivers/mmc/core/block.c | 18 +- drivers/mmc/core/bus.c | 38 +- drivers/mmc/core/core.c | 25 +- drivers/mmc/core/core.h | 1 + drivers/mmc/core/host.h | 7 + drivers/mmc/core/mmc_ops.c | 25 +- drivers/mmc/core/mmc_ops.h | 1 + drivers/mmc/core/regulator.c | 34 + drivers/mmc/core/sd.c | 13 +- drivers/mmc/core/sd.h | 4 + drivers/mmc/core/sd_ops.c | 11 + drivers/mmc/core/sd_ops.h | 18 + drivers/mmc/core/sd_uhs2.c | 1367 +++++++++++++++++++++++++++++ drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pci-core.c | 16 +- drivers/mmc/host/sdhci-pci-gli.c | 233 ++++- drivers/mmc/host/sdhci-pci.h | 3 + drivers/mmc/host/sdhci-uhs2.c | 1321 ++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 192 ++++ drivers/mmc/host/sdhci.c | 274 +++--- drivers/mmc/host/sdhci.h | 74 +- include/linux/mmc/card.h | 36 + include/linux/mmc/core.h | 13 + include/linux/mmc/host.h | 89 ++ include/linux/mmc/sd_uhs2.h | 240 +++++ 27 files changed, 3907 insertions(+), 159 deletions(-) create mode 100644 drivers/mmc/core/sd_uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.h create mode 100644 include/linux/mmc/sd_uhs2.h