diff mbox series

[v7,1/2] PCI: dwc: Implement general suspend/resume functionality for L2/L3 transitions

Message ID 20230802155748.212377-1-Frank.Li@nxp.com (mailing list archive)
State Superseded
Delegated to: Krzysztof WilczyƄski
Headers show
Series [v7,1/2] PCI: dwc: Implement general suspend/resume functionality for L2/L3 transitions | expand

Commit Message

Frank Li Aug. 2, 2023, 3:57 p.m. UTC
Introduce helper function dw_pcie_get_ltssm to retrieve SMLH_LTSS_STATE.

Add callback .pme_turn_off and .exit_from_l2 for platform specific PME
handling.

Add common dw_pcie_suspend(resume)_noirq() API to avoid duplicated code
in dwc pci host controller platform driver.

Typical L2 entry workflow/dw_pcie_suspend_noirq()

1. Transmit PME turn off signal to PCI devices and wait for PME_To_Ack.
2. Await link entering L2_IDLE state.

Typical L2 exit workflow/dw_pcie_resume_noirq()

1. Issue exit from L2 command.
2. Reinitialize PCI host.
3. Wait for link to become active.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 Change from v6 to v7
 - change according to Manivannan's comments.
   fix sleep value 100 (should be 1000 for 1ms).
   use dev_err when timeout
 Change from v5 to v6:
 - refine commit message
   change according to Manivannan's comments.
   - remove reduncate step dw_pcie_set_dstate()
   - return 0 when .pme_turn_off is zero
   - call host_deinit() in suspend
   - check .host_deinit and .host_init point before call.

 Change from v4 to v5:
 - Closes: https://lore.kernel.org/oe-kbuild-all/202307211904.zExw4Q8H-lkp@intel.com/
 Change from v3 to v4:
 - change according to Manivannan's comments.
   I hope I have not missed anything. quite long discuss thread
 Change from v2 to v3:
 - Basic rewrite whole patch according rob herry suggestion.
   put common function into dwc, so more soc can share the same logic.

 .../pci/controller/dwc/pcie-designware-host.c | 78 +++++++++++++++++++
 drivers/pci/controller/dwc/pcie-designware.h  | 28 +++++++
 2 files changed, 106 insertions(+)

Comments

Bjorn Helgaas Aug. 2, 2023, 4:31 p.m. UTC | #1
On Wed, Aug 02, 2023 at 11:57:47AM -0400, Frank Li wrote:
> Introduce helper function dw_pcie_get_ltssm to retrieve SMLH_LTSS_STATE.

s/dw_pcie_get_ltssm/dw_pcie_get_ltssm()/

> Add callback .pme_turn_off and .exit_from_l2 for platform specific PME
> handling.
> 
> Add common dw_pcie_suspend(resume)_noirq() API to avoid duplicated code
> in dwc pci host controller platform driver.
> 
> Typical L2 entry workflow/dw_pcie_suspend_noirq()
> 
> 1. Transmit PME turn off signal to PCI devices and wait for PME_To_Ack.
> 2. Await link entering L2_IDLE state.
> 
> Typical L2 exit workflow/dw_pcie_resume_noirq()
> 
> 1. Issue exit from L2 command.
> 2. Reinitialize PCI host.
> 3. Wait for link to become active.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  Change from v6 to v7
>  - change according to Manivannan's comments.
>    fix sleep value 100 (should be 1000 for 1ms).

> +	 * PCI Express Base Specification Rev 4.0 Section 5.3.3.2.1 PME
> +	 * Synchronization Recommends 1ms to 10ms timeout to check L2 ready.
> +	 */
> +	ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> +				1000, 10000, false, pci);

Thanks for the spec citation.  Can you please reference the current
spec, i.e., "PCIe r6.0, sec 5.3.3.2.1".

s/Recommends/recommends/

It would really be great to have a #define for this since the bare
numbers are not very meaningful and they're not specific to DWC so a
#define would let us find similar situations in other drivers.

Bjorn
Frank Li Aug. 2, 2023, 6:44 p.m. UTC | #2
On Wed, Aug 02, 2023 at 11:31:38AM -0500, Bjorn Helgaas wrote:
> On Wed, Aug 02, 2023 at 11:57:47AM -0400, Frank Li wrote:
> > Introduce helper function dw_pcie_get_ltssm to retrieve SMLH_LTSS_STATE.
> 
> s/dw_pcie_get_ltssm/dw_pcie_get_ltssm()/
> 
> > Add callback .pme_turn_off and .exit_from_l2 for platform specific PME
> > handling.
> > 
> > Add common dw_pcie_suspend(resume)_noirq() API to avoid duplicated code
> > in dwc pci host controller platform driver.
> > 
> > Typical L2 entry workflow/dw_pcie_suspend_noirq()
> > 
> > 1. Transmit PME turn off signal to PCI devices and wait for PME_To_Ack.
> > 2. Await link entering L2_IDLE state.
> > 
> > Typical L2 exit workflow/dw_pcie_resume_noirq()
> > 
> > 1. Issue exit from L2 command.
> > 2. Reinitialize PCI host.
> > 3. Wait for link to become active.
> > 
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >  Change from v6 to v7
> >  - change according to Manivannan's comments.
> >    fix sleep value 100 (should be 1000 for 1ms).
> 
> > +	 * PCI Express Base Specification Rev 4.0 Section 5.3.3.2.1 PME
> > +	 * Synchronization Recommends 1ms to 10ms timeout to check L2 ready.
> > +	 */
> > +	ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> > +				1000, 10000, false, pci);
> 
> Thanks for the spec citation.  Can you please reference the current
> spec, i.e., "PCIe r6.0, sec 5.3.3.2.1".
> 
> s/Recommends/recommends/
> 
> It would really be great to have a #define for this since the bare
> numbers are not very meaningful and they're not specific to DWC so a
> #define would let us find similar situations in other drivers.

how about define as

#define PCI_PME_TO_L2_TIMEOUT 10000

ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
                           PCI_PME_TO_L2_TIMEOUT/10, PCI_PME_TO_L2_TIMEOUT, false, pci);

where is good place PCI_PME_TO_L2_TIMEOUT in?

pcie-designware.h or pci.h?

Frank

> 
> Bjorn
Bjorn Helgaas Aug. 2, 2023, 7:06 p.m. UTC | #3
On Wed, Aug 02, 2023 at 02:44:52PM -0400, Frank Li wrote:
> On Wed, Aug 02, 2023 at 11:31:38AM -0500, Bjorn Helgaas wrote:
> > On Wed, Aug 02, 2023 at 11:57:47AM -0400, Frank Li wrote:
> > > Introduce helper function dw_pcie_get_ltssm to retrieve SMLH_LTSS_STATE.
> > > Add callback .pme_turn_off and .exit_from_l2 for platform specific PME
> > > handling.

> > > +	 * PCI Express Base Specification Rev 4.0 Section 5.3.3.2.1 PME
> > > +	 * Synchronization Recommends 1ms to 10ms timeout to check L2 ready.
> > > +	 */
> > > +	ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> > > +				1000, 10000, false, pci);

> > It would really be great to have a #define for this since the bare
> > numbers are not very meaningful and they're not specific to DWC so a
> > #define would let us find similar situations in other drivers.
> 
> how about define as
> 
> #define PCI_PME_TO_L2_TIMEOUT 10000
> 
> ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
>                            PCI_PME_TO_L2_TIMEOUT/10, PCI_PME_TO_L2_TIMEOUT, false, pci);
> 
> where is good place PCI_PME_TO_L2_TIMEOUT in?
> 
> pcie-designware.h or pci.h?

I think drivers/pci/pci.h since it's only useful inside drivers/pci,
and it's not specific to dwc.

Maybe "PCIE_" (not "PCI_") since this is a PCIe-specific thing.
You could put it next to PCIE_LINK_RETRAIN_TIMEOUT_MS and add a "_US"
suffix so we know what the units are.

Bjorn
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 9952057c8819c..bc01ecc1c3ec8 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -8,6 +8,7 @@ 
  * Author: Jingoo Han <jg1.han@samsung.com>
  */
 
+#include <linux/iopoll.h>
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/msi.h>
@@ -807,3 +808,80 @@  int dw_pcie_setup_rc(struct dw_pcie_rp *pp)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dw_pcie_setup_rc);
+
+int dw_pcie_suspend_noirq(struct dw_pcie *pci)
+{
+	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	u32 val;
+	int ret;
+
+	/*
+	 * If L1SS is supported, then do not put the link into L2 as some
+	 * devices such as NVMe expect low resume latency.
+	 */
+	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
+		return 0;
+
+	if (dw_pcie_get_ltssm(pci) <= DW_PCIE_LTSSM_DETECT_ACT)
+		return 0;
+
+	if (!pci->pp.ops->pme_turn_off)
+		return 0;
+
+	pci->pp.ops->pme_turn_off(&pci->pp);
+
+	/*
+	 * PCI Express Base Specification Rev 4.0 Section 5.3.3.2.1 PME
+	 * Synchronization Recommends 1ms to 10ms timeout to check L2 ready.
+	 */
+	ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
+				1000, 10000, false, pci);
+	if (ret) {
+		dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
+		return ret;
+	}
+
+	if (pci->pp.ops->host_deinit)
+		pci->pp.ops->host_deinit(&pci->pp);
+
+	pci->suspended = true;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dw_pcie_suspend_noirq);
+
+int dw_pcie_resume_noirq(struct dw_pcie *pci)
+{
+	int ret;
+
+	if (!pci->suspended)
+		return 0;
+
+	pci->suspended = false;
+
+	if (!pci->pp.ops->exit_from_l2)
+		return 0;
+
+	pci->pp.ops->exit_from_l2(&pci->pp);
+
+	if (pci->pp.ops->host_init) {
+		ret = pci->pp.ops->host_init(&pci->pp);
+		if (ret) {
+			dev_err(pci->dev, "Host init failed! ret = %d\n", ret);
+			return ret;
+		}
+	}
+
+	dw_pcie_setup_rc(&pci->pp);
+
+	ret = dw_pcie_start_link(pci);
+	if (ret)
+		return ret;
+
+	ret = dw_pcie_wait_for_link(pci);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dw_pcie_resume_noirq);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 79713ce075cc1..cbba3ed19b3c0 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -288,10 +288,21 @@  enum dw_pcie_core_rst {
 	DW_PCIE_NUM_CORE_RSTS
 };
 
+enum dw_pcie_ltssm {
+	DW_PCIE_LTSSM_UNKNOWN = 0xFFFFFFFF,
+	/* Need to align with PCIE_PORT_DEBUG0 bits 0:5 */
+	DW_PCIE_LTSSM_DETECT_QUIET = 0x0,
+	DW_PCIE_LTSSM_DETECT_ACT = 0x1,
+	DW_PCIE_LTSSM_L0 = 0x11,
+	DW_PCIE_LTSSM_L2_IDLE = 0x15,
+};
+
 struct dw_pcie_host_ops {
 	int (*host_init)(struct dw_pcie_rp *pp);
 	void (*host_deinit)(struct dw_pcie_rp *pp);
 	int (*msi_host_init)(struct dw_pcie_rp *pp);
+	void (*pme_turn_off)(struct dw_pcie_rp *pp);
+	void (*exit_from_l2)(struct dw_pcie_rp *pp);
 };
 
 struct dw_pcie_rp {
@@ -364,6 +375,7 @@  struct dw_pcie_ops {
 	void    (*write_dbi2)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
 			      size_t size, u32 val);
 	int	(*link_up)(struct dw_pcie *pcie);
+	enum dw_pcie_ltssm (*get_ltssm)(struct dw_pcie *pcie);
 	int	(*start_link)(struct dw_pcie *pcie);
 	void	(*stop_link)(struct dw_pcie *pcie);
 };
@@ -393,6 +405,7 @@  struct dw_pcie {
 	struct reset_control_bulk_data	app_rsts[DW_PCIE_NUM_APP_RSTS];
 	struct reset_control_bulk_data	core_rsts[DW_PCIE_NUM_CORE_RSTS];
 	struct gpio_desc		*pe_rst;
+	bool			suspended;
 };
 
 #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
@@ -430,6 +443,9 @@  void dw_pcie_iatu_detect(struct dw_pcie *pci);
 int dw_pcie_edma_detect(struct dw_pcie *pci);
 void dw_pcie_edma_remove(struct dw_pcie *pci);
 
+int dw_pcie_suspend_noirq(struct dw_pcie *pci);
+int dw_pcie_resume_noirq(struct dw_pcie *pci);
+
 static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
 {
 	dw_pcie_write_dbi(pci, reg, 0x4, val);
@@ -501,6 +517,18 @@  static inline void dw_pcie_stop_link(struct dw_pcie *pci)
 		pci->ops->stop_link(pci);
 }
 
+static inline enum dw_pcie_ltssm dw_pcie_get_ltssm(struct dw_pcie *pci)
+{
+	u32 val;
+
+	if (pci->ops && pci->ops->get_ltssm)
+		return pci->ops->get_ltssm(pci);
+
+	val = dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0);
+
+	return (enum dw_pcie_ltssm)FIELD_GET(PORT_LOGIC_LTSSM_STATE_MASK, val);
+}
+
 #ifdef CONFIG_PCIE_DW_HOST
 irqreturn_t dw_handle_msi_irq(struct dw_pcie_rp *pp);
 int dw_pcie_setup_rc(struct dw_pcie_rp *pp);