| Message ID | d3130584b64309da28a04826100643ff6239f9ca.1690841657.git.daniel@makrotopia.org (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Felix Fietkau |
| Headers | show |
| Series | [net-next,v3,1/2] dt-bindings: mt76: support setting per-band MAC address | expand |
Daniel Golle <daniel@makrotopia.org> writes: > Introduce support for setting individual per-band MAC addresses using > NVMEM cells by adding a 'bands' object with enumerated child nodes > representing the 2.4 GHz, 5 GHz and 6 GHz bands. > > In case it is defined, call of_get_mac_address for the per-band child > node, otherwise try with of_get_mac_address on the main device node and > fall back to a random address like it used to be. > > While at it, add MAC address related properties also for the main node. > > Signed-off-by: Daniel Golle <daniel@makrotopia.org> mt76 patches go to Felix's tree, not net-next. No need to resend because of this.
On Mon, Jul 31, 2023 at 11:23:16PM +0100, Daniel Golle wrote: > Introduce support for setting individual per-band MAC addresses using > NVMEM cells by adding a 'bands' object with enumerated child nodes > representing the 2.4 GHz, 5 GHz and 6 GHz bands. > > In case it is defined, call of_get_mac_address for the per-band child > node, otherwise try with of_get_mac_address on the main device node and > fall back to a random address like it used to be. > > While at it, add MAC address related properties also for the main node. > > Signed-off-by: Daniel Golle <daniel@makrotopia.org> > --- > Changes since v2: > * drop items list with only a single item > > Changes since v1: > * add dt-bindings > > .../bindings/net/wireless/mediatek,mt76.yaml | 58 ++++++++++++++++++- > 1 file changed, 57 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml > index 252207adbc54c..7eafed53da1de 100644 > --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml > +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml > @@ -37,6 +37,12 @@ properties: > description: > MT7986 should contain 3 regions consys, dcm, and sku, in this order. > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > interrupts: > maxItems: 1 > > @@ -72,13 +78,23 @@ properties: > > ieee80211-freq-limit: true > > + address: true What's this? Not a documented property. > + > + local-mac-address: true > + > + mac-address: true You really need a ref to the schema defining these. But first we need to split them out from ethernet-controller.yaml. Which I think there were patches for, but it stalled out. Anyways, it's fine for now if you're not up for that. > + > nvmem-cells: > + minItems: 1 > items: > - description: NVMEM cell with EEPROM > + - description: NVMEM cell with the MAC address > > nvmem-cell-names: > + minItems: 1 > items: > - const: eeprom > + - const: mac-address > > mediatek,eeprom-data: > $ref: /schemas/types.yaml#/definitions/uint32-array > @@ -213,6 +229,29 @@ properties: > description: > Half-dBm power delta for different numbers of antennas > > +patternProperties: > + '^band@[0-2]+$': > + type: object > + additionalProperties: false > + properties: > + reg: > + maxItems: 1 > + > + address: true > + local-mac-address: true > + mac-address: true > + > + nvmem-cells: > + description: NVMEM cell with the MAC address > + > + nvmem-cell-names: > + const: mac-address > + > + required: > + - reg > + > + unevaluatedProperties: false > + > required: > - compatible > - reg > @@ -225,10 +264,13 @@ examples: > #address-cells = <3>; > #size-cells = <2>; > wifi@0,0 { > + #address-cells = <1>; > + #size-cells = <0>; > compatible = "mediatek,mt76"; > reg = <0x0000 0 0 0 0>; > ieee80211-freq-limit = <5000000 6000000>; > - mediatek,mtd-eeprom = <&factory 0x8000>; > + nvmem-cells = <&factory_eeprom>; > + nvmem-cell-names = "eeprom"; > big-endian; > > led { > @@ -257,6 +299,20 @@ examples: > }; > }; > }; > + > + band@0 { > + /* 2.4 GHz */ > + reg = <0>; > + nvmem-cells = <&macaddr 0x4>; > + nvmem-cell-names = "mac-address"; > + }; > + > + band@1 { > + /* 5 GHz */ > + reg = <1>; > + nvmem-cells = <&macaddr 0xa>; > + nvmem-cell-names = "mac-address"; > + }; > }; > }; > > -- > 2.41.0
On Fri, Aug 11, 2023 at 01:09:44PM -0600, Rob Herring wrote: > On Mon, Jul 31, 2023 at 11:23:16PM +0100, Daniel Golle wrote: > > Introduce support for setting individual per-band MAC addresses using > > NVMEM cells by adding a 'bands' object with enumerated child nodes > > representing the 2.4 GHz, 5 GHz and 6 GHz bands. > > > > In case it is defined, call of_get_mac_address for the per-band child > > node, otherwise try with of_get_mac_address on the main device node and > > fall back to a random address like it used to be. > > > > While at it, add MAC address related properties also for the main node. > > > > Signed-off-by: Daniel Golle <daniel@makrotopia.org> > > --- > > Changes since v2: > > * drop items list with only a single item > > > > Changes since v1: > > * add dt-bindings > > > > .../bindings/net/wireless/mediatek,mt76.yaml | 58 ++++++++++++++++++- > > 1 file changed, 57 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml > > index 252207adbc54c..7eafed53da1de 100644 > > --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml > > +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml > > @@ -37,6 +37,12 @@ properties: > > description: > > MT7986 should contain 3 regions consys, dcm, and sku, in this order. > > > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > interrupts: > > maxItems: 1 > > > > @@ -72,13 +78,23 @@ properties: > > > > ieee80211-freq-limit: true > > > > + address: true > > What's this? Not a documented property. Maybe it should be documented then...? See https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/net/core/of_net.c#n140 ``` int of_get_mac_address(struct device_node *np, u8 *addr) { int ret; if (!np) return -ENODEV; ret = of_get_mac_addr(np, "mac-address", addr); if (!ret) return 0; ret = of_get_mac_addr(np, "local-mac-address", addr); if (!ret) return 0; ret = of_get_mac_addr(np, "address", addr); if (!ret) return 0; return of_get_mac_address_nvmem(np, addr); } EXPORT_SYMBOL(of_get_mac_address); ``` > > > > + > > + local-mac-address: true > > + > > + mac-address: true > > You really need a ref to the schema defining these. But first we need to > split them out from ethernet-controller.yaml. Which I think there were > patches for, but it stalled out. > I understand, so have a schema to include whenever of_net.c is used to assign a MAC address, and then use that for ethernet-controller.yaml and in places such as here. If you point me to the existing patches I can pick them up and address whatever needs to be addressed to get them merged. > Anyways, it's fine for now if you're not up for that. So just remove the (supposedly deprecated) "address: true" for now and then create an of_net MAC-address related schema and move things there after that? > > > + > > nvmem-cells: > > + minItems: 1 > > items: > > - description: NVMEM cell with EEPROM > > + - description: NVMEM cell with the MAC address > > > > nvmem-cell-names: > > + minItems: 1 > > items: > > - const: eeprom > > + - const: mac-address > > > > mediatek,eeprom-data: > > $ref: /schemas/types.yaml#/definitions/uint32-array > > @@ -213,6 +229,29 @@ properties: > > description: > > Half-dBm power delta for different numbers of antennas > > > > +patternProperties: > > + '^band@[0-2]+$': > > + type: object > > + additionalProperties: false > > + properties: > > + reg: > > + maxItems: 1 > > + > > + address: true > > + local-mac-address: true > > + mac-address: true > > + > > + nvmem-cells: > > + description: NVMEM cell with the MAC address > > + > > + nvmem-cell-names: > > + const: mac-address > > + > > + required: > > + - reg > > + > > + unevaluatedProperties: false > > + > > required: > > - compatible > > - reg > > @@ -225,10 +264,13 @@ examples: > > #address-cells = <3>; > > #size-cells = <2>; > > wifi@0,0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > compatible = "mediatek,mt76"; > > reg = <0x0000 0 0 0 0>; > > ieee80211-freq-limit = <5000000 6000000>; > > - mediatek,mtd-eeprom = <&factory 0x8000>; > > + nvmem-cells = <&factory_eeprom>; > > + nvmem-cell-names = "eeprom"; > > big-endian; > > > > led { > > @@ -257,6 +299,20 @@ examples: > > }; > > }; > > }; > > + > > + band@0 { > > + /* 2.4 GHz */ > > + reg = <0>; > > + nvmem-cells = <&macaddr 0x4>; > > + nvmem-cell-names = "mac-address"; > > + }; > > + > > + band@1 { > > + /* 5 GHz */ > > + reg = <1>; > > + nvmem-cells = <&macaddr 0xa>; > > + nvmem-cell-names = "mac-address"; > > + }; > > }; > > }; > > > > -- > > 2.41.0
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 252207adbc54c..7eafed53da1de 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -37,6 +37,12 @@ properties: description: MT7986 should contain 3 regions consys, dcm, and sku, in this order. + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + interrupts: maxItems: 1 @@ -72,13 +78,23 @@ properties: ieee80211-freq-limit: true + address: true + + local-mac-address: true + + mac-address: true + nvmem-cells: + minItems: 1 items: - description: NVMEM cell with EEPROM + - description: NVMEM cell with the MAC address nvmem-cell-names: + minItems: 1 items: - const: eeprom + - const: mac-address mediatek,eeprom-data: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -213,6 +229,29 @@ properties: description: Half-dBm power delta for different numbers of antennas +patternProperties: + '^band@[0-2]+$': + type: object + additionalProperties: false + properties: + reg: + maxItems: 1 + + address: true + local-mac-address: true + mac-address: true + + nvmem-cells: + description: NVMEM cell with the MAC address + + nvmem-cell-names: + const: mac-address + + required: + - reg + + unevaluatedProperties: false + required: - compatible - reg @@ -225,10 +264,13 @@ examples: #address-cells = <3>; #size-cells = <2>; wifi@0,0 { + #address-cells = <1>; + #size-cells = <0>; compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; ieee80211-freq-limit = <5000000 6000000>; - mediatek,mtd-eeprom = <&factory 0x8000>; + nvmem-cells = <&factory_eeprom>; + nvmem-cell-names = "eeprom"; big-endian; led { @@ -257,6 +299,20 @@ examples: }; }; }; + + band@0 { + /* 2.4 GHz */ + reg = <0>; + nvmem-cells = <&macaddr 0x4>; + nvmem-cell-names = "mac-address"; + }; + + band@1 { + /* 5 GHz */ + reg = <1>; + nvmem-cells = <&macaddr 0xa>; + nvmem-cell-names = "mac-address"; + }; }; };
Introduce support for setting individual per-band MAC addresses using NVMEM cells by adding a 'bands' object with enumerated child nodes representing the 2.4 GHz, 5 GHz and 6 GHz bands. In case it is defined, call of_get_mac_address for the per-band child node, otherwise try with of_get_mac_address on the main device node and fall back to a random address like it used to be. While at it, add MAC address related properties also for the main node. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- Changes since v2: * drop items list with only a single item Changes since v1: * add dt-bindings .../bindings/net/wireless/mediatek,mt76.yaml | 58 ++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-)