diff mbox series

drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier

Message ID 20231025094600.371566-1-mika.kahola@intel.com (mailing list archive)
State New, archived
Headers show
Series drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier | expand

Commit Message

Mika Kahola Oct. 25, 2023, 9:46 a.m. UTC
Display driver shall read DPCD 00071h[3:1] during configuration
to get PSR setup time. This register provides the setup time
requirement on the VSC SDP entry packet. If setup time cannot be
met with the current timings
(e.g., PSR setup time + other blanking requirements > blanking time),
driver should enable sending VSC SDP one frame earlier before sending
the capture frame.

BSpec: 69895 (PSR Entry Setup Frames 17:16)

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
---
 .../drm/i915/display/intel_display_types.h    |  1 +
 drivers/gpu/drm/i915/display/intel_psr.c      | 35 ++++++++++++++++---
 drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 ++
 3 files changed, 33 insertions(+), 5 deletions(-)

Comments

Ville Syrjälä Oct. 25, 2023, 12:08 p.m. UTC | #1
On Wed, Oct 25, 2023 at 12:46:00PM +0300, Mika Kahola wrote:
> Display driver shall read DPCD 00071h[3:1] during configuration
> to get PSR setup time. This register provides the setup time
> requirement on the VSC SDP entry packet. If setup time cannot be
> met with the current timings
> (e.g., PSR setup time + other blanking requirements > blanking time),
> driver should enable sending VSC SDP one frame earlier before sending
> the capture frame.
> 
> BSpec: 69895 (PSR Entry Setup Frames 17:16)
> 
> Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> ---
>  .../drm/i915/display/intel_display_types.h    |  1 +
>  drivers/gpu/drm/i915/display/intel_psr.c      | 35 ++++++++++++++++---
>  drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 ++
>  3 files changed, 33 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 65ea37fe8cff..a0bcab6f2bec 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1710,6 +1710,7 @@ struct intel_psr {
>  	u32 dc3co_exitline;
>  	u32 dc3co_exit_delay;
>  	struct delayed_work dc3co_work;
> +	u8 entry_setup_frames;
>  };
>  
>  struct intel_dp {
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
> index 4f1f31fc9529..0acb4edae128 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -592,6 +592,9 @@ static void intel_psr_enable_sink(struct intel_dp *intel_dp)
>  	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>  		dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
>  
> +	if (intel_dp->psr.entry_setup_frames > 0)
> +		dpcd_val |= DP_PSR_FRAME_CAPTURE;
> +
>  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
>  
>  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
> @@ -690,6 +693,9 @@ static void hsw_activate_psr1(struct intel_dp *intel_dp)
>  	if (DISPLAY_VER(dev_priv) >= 8)
>  		val |= EDP_PSR_CRC_ENABLE;
>  
> +	if (intel_dp->psr.entry_setup_frames > 0)
> +		val |= EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
> +
>  	intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
>  		     ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
>  }
> @@ -731,6 +737,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  {
>  	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>  	enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
> +	u8 frames_before_su_entry;
>  	u32 val = EDP_PSR2_ENABLE;
>  
>  	val |= EDP_PSR2_IDLE_FRAMES(psr_compute_idle_frames(intel_dp));
> @@ -741,7 +748,10 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  	if (DISPLAY_VER(dev_priv) >= 10 && DISPLAY_VER(dev_priv) <= 12)
>  		val |= EDP_Y_COORDINATE_ENABLE;
>  
> -	val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp->psr.sink_sync_latency + 1, 2));
> +	frames_before_su_entry = max_t(u8,
> +				       intel_dp->psr.sink_sync_latency + 1,
> +				       2);

I would put that (and the setup_frames +1) into its own function.

> +	val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry);
>  	val |= intel_psr2_get_tp_time(intel_dp);
>  
>  	if (DISPLAY_VER(dev_priv) >= 12) {
> @@ -785,6 +795,14 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>  		val |= EDP_PSR2_SU_SDP_SCANLINE;
>  
> +	/* Entry setup frames must be at least 1 less than frames before SU entry */
> +	if (intel_dp->psr.entry_setup_frames > 0) {
> +		val |= EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);

You're writitng that into the wrong registers.

> +
> +		if (intel_dp->psr.entry_setup_frames >= frames_before_su_entry)
> +			val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry + 1);
> +	}
> +
>  	if (intel_dp->psr.psr2_sel_fetch_enabled) {
>  		u32 tmp;
>  
> @@ -1252,10 +1270,17 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
>  
>  	if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
>  	    adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
> -		drm_dbg_kms(&dev_priv->drm,
> -			    "PSR condition failed: PSR setup time (%d us) too long\n",
> -			    psr_setup_time);
> -		return;
> +		if (DISPLAY_VER(dev_priv) >= 20) {
> +			intel_dp->psr.entry_setup_frames = 1;

I don't see where you're clearing this to 0.

I would extract the whole setup_time -> setup_frames conversion into
its own function and just do a setup_frames vs. platform check here.


> +			drm_dbg_kms(&dev_priv->drm,
> +				    "PSR setup entry frames: %d\n",
> +				    intel_dp->psr.entry_setup_frames);
> +		} else {
> +			drm_dbg_kms(&dev_priv->drm,
> +				    "PSR condition failed: PSR setup time (%d us) too long\n",
> +				    psr_setup_time);
> +			return;
> +		}
>  	}
>  
>  	crtc_state->has_psr = true;
> diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> index d39951383c92..9414c4de5f6e 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> @@ -35,6 +35,8 @@
>  #define   EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES	REG_FIELD_PREP(EDP_PSR_MIN_LINK_ENTRY_TIME_MASK, 3)
>  #define   EDP_PSR_MAX_SLEEP_TIME_MASK		REG_GENMASK(24, 20)
>  #define   EDP_PSR_MAX_SLEEP_TIME(x)		REG_FIELD_PREP(EDP_PSR_MAX_SLEEP_TIME_MASK, (x))
> +#define   EDP_PSR_ENTRY_SETUP_FRAMES_MASK	REG_GENMASK(17, 16)
> +#define   EDP_PSR_ENTRY_SETUP_FRAMES(x)		REG_FIELD_PREP(EDP_PSR_ENTRY_SETUP_FRAMES_MASK, (x))
>  #define   EDP_PSR_SKIP_AUX_EXIT			REG_BIT(12)
>  #define   EDP_PSR_TP_MASK			REG_BIT(11)
>  #define   EDP_PSR_TP_TP1_TP2			REG_FIELD_PREP(EDP_PSR_TP_MASK, 0)
> -- 
> 2.34.1
Hogander, Jouni Oct. 25, 2023, 1:05 p.m. UTC | #2
On Wed, 2023-10-25 at 12:46 +0300, Mika Kahola wrote:
> Display driver shall read DPCD 00071h[3:1] during configuration
> to get PSR setup time. This register provides the setup time
> requirement on the VSC SDP entry packet. If setup time cannot be
> met with the current timings
> (e.g., PSR setup time + other blanking requirements > blanking time),
> driver should enable sending VSC SDP one frame earlier before sending
> the capture frame.
> 
> BSpec: 69895 (PSR Entry Setup Frames 17:16)
> 
> Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> ---
>  .../drm/i915/display/intel_display_types.h    |  1 +
>  drivers/gpu/drm/i915/display/intel_psr.c      | 35 ++++++++++++++++-
> --
>  drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 ++
>  3 files changed, 33 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 65ea37fe8cff..a0bcab6f2bec 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1710,6 +1710,7 @@ struct intel_psr {
>         u32 dc3co_exitline;
>         u32 dc3co_exit_delay;
>         struct delayed_work dc3co_work;
> +       u8 entry_setup_frames;

eDP spec is speaking about 1 frame. Our HW seem to have possibility to
have several.

>  };
>  
>  struct intel_dp {
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> b/drivers/gpu/drm/i915/display/intel_psr.c
> index 4f1f31fc9529..0acb4edae128 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -592,6 +592,9 @@ static void intel_psr_enable_sink(struct intel_dp
> *intel_dp)
>         if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>                 dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
>  
> +       if (intel_dp->psr.entry_setup_frames > 0)
> +               dpcd_val |= DP_PSR_FRAME_CAPTURE;
> +
>         drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
>  
>         drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> DP_SET_POWER_D0);
> @@ -690,6 +693,9 @@ static void hsw_activate_psr1(struct intel_dp
> *intel_dp)
>         if (DISPLAY_VER(dev_priv) >= 8)
>                 val |= EDP_PSR_CRC_ENABLE;
>  
> +       if (intel_dp->psr.entry_setup_frames > 0)
> +               val |= EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp-
> >psr.entry_setup_frames);
> +
>         intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
>                      ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
>  }
> @@ -731,6 +737,7 @@ static void hsw_activate_psr2(struct intel_dp
> *intel_dp)
>  {
>         struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>         enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
> +       u8 frames_before_su_entry;
>         u32 val = EDP_PSR2_ENABLE;
>  
>         val |=
> EDP_PSR2_IDLE_FRAMES(psr_compute_idle_frames(intel_dp));
> @@ -741,7 +748,10 @@ static void hsw_activate_psr2(struct intel_dp
> *intel_dp)
>         if (DISPLAY_VER(dev_priv) >= 10 && DISPLAY_VER(dev_priv) <=
> 12)
>                 val |= EDP_Y_COORDINATE_ENABLE;
>  
> -       val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp-
> >psr.sink_sync_latency + 1, 2));
> +       frames_before_su_entry = max_t(u8,
> +                                      intel_dp-
> >psr.sink_sync_latency + 1,
> +                                      2);
> +       val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry);

I think you want to do this only once. Below or here.

>         val |= intel_psr2_get_tp_time(intel_dp);
>  
>         if (DISPLAY_VER(dev_priv) >= 12) {
> @@ -785,6 +795,14 @@ static void hsw_activate_psr2(struct intel_dp
> *intel_dp)
>         if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>                 val |= EDP_PSR2_SU_SDP_SCANLINE;
>  
> +       /* Entry setup frames must be at least 1 less than frames
> before SU entry */
> +       if (intel_dp->psr.entry_setup_frames > 0) {
> +               val |= EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp-
> >psr.entry_setup_frames);

This is not the correct register. You want to have this in PSR_CTL (not
PSR2_CTL).

> +
> +               if (intel_dp->psr.entry_setup_frames >=
> frames_before_su_entry)
> +                       val |=
> EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry + 1);
> +       }
> +

Here you are ORing second time. Please do it only once.

>         if (intel_dp->psr.psr2_sel_fetch_enabled) {
>                 u32 tmp;
>  
> @@ -1252,10 +1270,17 @@ void intel_psr_compute_config(struct intel_dp
> *intel_dp,
>  
>         if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
>             adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay
> - 1) {
> -               drm_dbg_kms(&dev_priv->drm,
> -                           "PSR condition failed: PSR setup time (%d
> us) too long\n",
> -                           psr_setup_time);
> -               return;
> +               if (DISPLAY_VER(dev_priv) >= 20) {
> +                       intel_dp->psr.entry_setup_frames = 1;
> +                       drm_dbg_kms(&dev_priv->drm,
> +                                   "PSR setup entry frames: %d\n",
> +                                   intel_dp-
> >psr.entry_setup_frames);
> +               } else {
> +                       drm_dbg_kms(&dev_priv->drm,
> +                                   "PSR condition failed: PSR setup
> time (%d us) too long\n",
> +                                   psr_setup_time);
> +                       return;
> +               }

Maybe you could add separate helper for this. E.g.
_compute_psr_setup_frames().

>         }
>  
>         crtc_state->has_psr = true;
> diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> index d39951383c92..9414c4de5f6e 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> @@ -35,6 +35,8 @@
>  #define  
> EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES  REG_FIELD_PREP(EDP_PSR_MIN_LINK_
> ENTRY_TIME_MASK, 3)
>  #define   EDP_PSR_MAX_SLEEP_TIME_MASK          REG_GENMASK(24, 20)
>  #define  
> EDP_PSR_MAX_SLEEP_TIME(x)            REG_FIELD_PREP(EDP_PSR_MAX_SLEEP
> _TIME_MASK, (x))
> +#define   EDP_PSR_ENTRY_SETUP_FRAMES_MASK      REG_GENMASK(17, 16)
> +#define  
> EDP_PSR_ENTRY_SETUP_FRAMES(x)                REG_FIELD_PREP(EDP_PSR_E

Maybe LNL prefix here could clarify that this is only in LNL and
beyond.

BR,

Jouni Högander

> NTRY_SETUP_FRAMES_MASK, (x))
>  #define   EDP_PSR_SKIP_AUX_EXIT                        REG_BIT(12)
>  #define   EDP_PSR_TP_MASK                      REG_BIT(11)
>  #define  
> EDP_PSR_TP_TP1_TP2                   REG_FIELD_PREP(EDP_PSR_TP_MASK,
> 0)
Mika Kahola Oct. 26, 2023, 10:42 a.m. UTC | #3
> -----Original Message-----
> From: Hogander, Jouni <jouni.hogander@intel.com>
> Sent: Wednesday, October 25, 2023 4:05 PM
> To: Kahola, Mika <mika.kahola@intel.com>; intel-gfx@lists.freedesktop.org
> Subject: Re: [PATCH] drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier
> 
> On Wed, 2023-10-25 at 12:46 +0300, Mika Kahola wrote:
> > Display driver shall read DPCD 00071h[3:1] during configuration to get
> > PSR setup time. This register provides the setup time requirement on
> > the VSC SDP entry packet. If setup time cannot be met with the current
> > timings (e.g., PSR setup time + other blanking requirements > blanking
> > time), driver should enable sending VSC SDP one frame earlier before
> > sending the capture frame.
> >
> > BSpec: 69895 (PSR Entry Setup Frames 17:16)
> >
> > Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> > ---
> >  .../drm/i915/display/intel_display_types.h    |  1 +
> >  drivers/gpu/drm/i915/display/intel_psr.c      | 35 ++++++++++++++++-
> > --
> >  drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 ++
> >  3 files changed, 33 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 65ea37fe8cff..a0bcab6f2bec 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -1710,6 +1710,7 @@ struct intel_psr {
> >         u32 dc3co_exitline;
> >         u32 dc3co_exit_delay;
> >         struct delayed_work dc3co_work;
> > +       u8 entry_setup_frames;
> 
> eDP spec is speaking about 1 frame. Our HW seem to have possibility to have several.

That's true. The bitfield is two bits wide so anything from zero to three frames are, in theory, allowed.
Since the description talks only having one frame earlier, I sticked to this idea.

> 
> >  };
> >
> >  struct intel_dp {
> > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> > b/drivers/gpu/drm/i915/display/intel_psr.c
> > index 4f1f31fc9529..0acb4edae128 100644
> > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > @@ -592,6 +592,9 @@ static void intel_psr_enable_sink(struct intel_dp
> > *intel_dp)
> >         if (intel_dp->psr.req_psr2_sdp_prior_scanline)
> >                 dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
> >
> > +       if (intel_dp->psr.entry_setup_frames > 0)
> > +               dpcd_val |= DP_PSR_FRAME_CAPTURE;
> > +
> >         drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
> >
> >         drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> > DP_SET_POWER_D0); @@ -690,6 +693,9 @@ static void
> > hsw_activate_psr1(struct intel_dp
> > *intel_dp)
> >         if (DISPLAY_VER(dev_priv) >= 8)
> >                 val |= EDP_PSR_CRC_ENABLE;
> >
> > +       if (intel_dp->psr.entry_setup_frames > 0)
> > +               val |= EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp-
> > >psr.entry_setup_frames);
> > +
> >         intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
> >                      ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
> >  }
> > @@ -731,6 +737,7 @@ static void hsw_activate_psr2(struct intel_dp
> > *intel_dp)
> >  {
> >         struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> >         enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
> > +       u8 frames_before_su_entry;
> >         u32 val = EDP_PSR2_ENABLE;
> >
> >         val |=
> > EDP_PSR2_IDLE_FRAMES(psr_compute_idle_frames(intel_dp));
> > @@ -741,7 +748,10 @@ static void hsw_activate_psr2(struct intel_dp
> > *intel_dp)
> >         if (DISPLAY_VER(dev_priv) >= 10 && DISPLAY_VER(dev_priv) <=
> > 12)
> >                 val |= EDP_Y_COORDINATE_ENABLE;
> >
> > -       val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp-
> > >psr.sink_sync_latency + 1, 2));
> > +       frames_before_su_entry = max_t(u8,
> > +                                      intel_dp-
> > >psr.sink_sync_latency + 1,
> > +                                      2);
> > +       val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry);
> 
> I think you want to do this only once. Below or here.

This might end up as a separate function so I will program this value only once there.

> 
> >         val |= intel_psr2_get_tp_time(intel_dp);
> >
> >         if (DISPLAY_VER(dev_priv) >= 12) { @@ -785,6 +795,14 @@ static
> > void hsw_activate_psr2(struct intel_dp
> > *intel_dp)
> >         if (intel_dp->psr.req_psr2_sdp_prior_scanline)
> >                 val |= EDP_PSR2_SU_SDP_SCANLINE;
> >
> > +       /* Entry setup frames must be at least 1 less than frames
> > before SU entry */
> > +       if (intel_dp->psr.entry_setup_frames > 0) {
> > +               val |= EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp-
> > >psr.entry_setup_frames);
> 
> This is not the correct register. You want to have this in PSR_CTL (not PSR2_CTL).

Yes, this ends up in the wrong place. I'll fix this.

> 
> > +
> > +               if (intel_dp->psr.entry_setup_frames >=
> > frames_before_su_entry)
> > +                       val |=
> > EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry + 1);
> > +       }
> > +
> 
> Here you are ORing second time. Please do it only once.

I will rewrite this so that this is done only once.

> 
> >         if (intel_dp->psr.psr2_sel_fetch_enabled) {
> >                 u32 tmp;
> >
> > @@ -1252,10 +1270,17 @@ void intel_psr_compute_config(struct intel_dp
> > *intel_dp,
> >
> >         if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
> >             adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay
> > - 1) {
> > -               drm_dbg_kms(&dev_priv->drm,
> > -                           "PSR condition failed: PSR setup time (%d
> > us) too long\n",
> > -                           psr_setup_time);
> > -               return;
> > +               if (DISPLAY_VER(dev_priv) >= 20) {
> > +                       intel_dp->psr.entry_setup_frames = 1;
> > +                       drm_dbg_kms(&dev_priv->drm,
> > +                                   "PSR setup entry frames: %d\n",
> > +                                   intel_dp-
> > >psr.entry_setup_frames);
> > +               } else {
> > +                       drm_dbg_kms(&dev_priv->drm,
> > +                                   "PSR condition failed: PSR setup
> > time (%d us) too long\n",
> > +                                   psr_setup_time);
> > +                       return;
> > +               }
> 
> Maybe you could add separate helper for this. E.g.
> _compute_psr_setup_frames().

Yes. That might be cleaner solution. 

> 
> >         }
> >
> >         crtc_state->has_psr = true;
> > diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> > b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> > index d39951383c92..9414c4de5f6e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> > +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> > @@ -35,6 +35,8 @@
> >  #define
> > EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES  REG_FIELD_PREP(EDP_PSR_MIN_LINK_
> > ENTRY_TIME_MASK, 3)
> >  #define   EDP_PSR_MAX_SLEEP_TIME_MASK          REG_GENMASK(24, 20)
> >  #define
> > EDP_PSR_MAX_SLEEP_TIME(x)            REG_FIELD_PREP(EDP_PSR_MAX_SLEEP
> > _TIME_MASK, (x))
> > +#define   EDP_PSR_ENTRY_SETUP_FRAMES_MASK      REG_GENMASK(17, 16)
> > +#define
> > EDP_PSR_ENTRY_SETUP_FRAMES(x)                REG_FIELD_PREP(EDP_PSR_E
> 
> Maybe LNL prefix here could clarify that this is only in LNL and
> beyond.
Yes, this bitfield is only for LNL+. I will rename these so this will be more clearly indicated.

Thanks for review & comments!

Mika
> 
> BR,
> 
> Jouni Högander
> 
> > NTRY_SETUP_FRAMES_MASK, (x))
> >  #define   EDP_PSR_SKIP_AUX_EXIT                        REG_BIT(12)
> >  #define   EDP_PSR_TP_MASK                      REG_BIT(11)
> >  #define
> > EDP_PSR_TP_TP1_TP2                   REG_FIELD_PREP(EDP_PSR_TP_MASK,
> > 0)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 65ea37fe8cff..a0bcab6f2bec 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1710,6 +1710,7 @@  struct intel_psr {
 	u32 dc3co_exitline;
 	u32 dc3co_exit_delay;
 	struct delayed_work dc3co_work;
+	u8 entry_setup_frames;
 };
 
 struct intel_dp {
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 4f1f31fc9529..0acb4edae128 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -592,6 +592,9 @@  static void intel_psr_enable_sink(struct intel_dp *intel_dp)
 	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
 		dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
 
+	if (intel_dp->psr.entry_setup_frames > 0)
+		dpcd_val |= DP_PSR_FRAME_CAPTURE;
+
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
 
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
@@ -690,6 +693,9 @@  static void hsw_activate_psr1(struct intel_dp *intel_dp)
 	if (DISPLAY_VER(dev_priv) >= 8)
 		val |= EDP_PSR_CRC_ENABLE;
 
+	if (intel_dp->psr.entry_setup_frames > 0)
+		val |= EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
+
 	intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
 		     ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
 }
@@ -731,6 +737,7 @@  static void hsw_activate_psr2(struct intel_dp *intel_dp)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
+	u8 frames_before_su_entry;
 	u32 val = EDP_PSR2_ENABLE;
 
 	val |= EDP_PSR2_IDLE_FRAMES(psr_compute_idle_frames(intel_dp));
@@ -741,7 +748,10 @@  static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	if (DISPLAY_VER(dev_priv) >= 10 && DISPLAY_VER(dev_priv) <= 12)
 		val |= EDP_Y_COORDINATE_ENABLE;
 
-	val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp->psr.sink_sync_latency + 1, 2));
+	frames_before_su_entry = max_t(u8,
+				       intel_dp->psr.sink_sync_latency + 1,
+				       2);
+	val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry);
 	val |= intel_psr2_get_tp_time(intel_dp);
 
 	if (DISPLAY_VER(dev_priv) >= 12) {
@@ -785,6 +795,14 @@  static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
 		val |= EDP_PSR2_SU_SDP_SCANLINE;
 
+	/* Entry setup frames must be at least 1 less than frames before SU entry */
+	if (intel_dp->psr.entry_setup_frames > 0) {
+		val |= EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
+
+		if (intel_dp->psr.entry_setup_frames >= frames_before_su_entry)
+			val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry + 1);
+	}
+
 	if (intel_dp->psr.psr2_sel_fetch_enabled) {
 		u32 tmp;
 
@@ -1252,10 +1270,17 @@  void intel_psr_compute_config(struct intel_dp *intel_dp,
 
 	if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
 	    adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "PSR condition failed: PSR setup time (%d us) too long\n",
-			    psr_setup_time);
-		return;
+		if (DISPLAY_VER(dev_priv) >= 20) {
+			intel_dp->psr.entry_setup_frames = 1;
+			drm_dbg_kms(&dev_priv->drm,
+				    "PSR setup entry frames: %d\n",
+				    intel_dp->psr.entry_setup_frames);
+		} else {
+			drm_dbg_kms(&dev_priv->drm,
+				    "PSR condition failed: PSR setup time (%d us) too long\n",
+				    psr_setup_time);
+			return;
+		}
 	}
 
 	crtc_state->has_psr = true;
diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h
index d39951383c92..9414c4de5f6e 100644
--- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
@@ -35,6 +35,8 @@ 
 #define   EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES	REG_FIELD_PREP(EDP_PSR_MIN_LINK_ENTRY_TIME_MASK, 3)
 #define   EDP_PSR_MAX_SLEEP_TIME_MASK		REG_GENMASK(24, 20)
 #define   EDP_PSR_MAX_SLEEP_TIME(x)		REG_FIELD_PREP(EDP_PSR_MAX_SLEEP_TIME_MASK, (x))
+#define   EDP_PSR_ENTRY_SETUP_FRAMES_MASK	REG_GENMASK(17, 16)
+#define   EDP_PSR_ENTRY_SETUP_FRAMES(x)		REG_FIELD_PREP(EDP_PSR_ENTRY_SETUP_FRAMES_MASK, (x))
 #define   EDP_PSR_SKIP_AUX_EXIT			REG_BIT(12)
 #define   EDP_PSR_TP_MASK			REG_BIT(11)
 #define   EDP_PSR_TP_TP1_TP2			REG_FIELD_PREP(EDP_PSR_TP_MASK, 0)