diff mbox series

[09/11] drm/rockchip: vop2: Add support for rk3588

Message ID 20231114112855.1771372-1-andyshrk@163.com (mailing list archive)
State New, archived
Headers show
Series Add VOP2 support on rk3588 | expand

Commit Message

Andy Yan Nov. 14, 2023, 11:28 a.m. UTC
From: Andy Yan <andy.yan@rock-chips.com>

VOP2 on rk3588:

Four video ports:
VP0 Max 4096x2160
VP1 Max 4096x2160
VP2 Max 4096x2160
VP3 Max 2048x1080

4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
4 4K Esmart windows with line RGB/YUV support

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 324 ++++++++++++++++++-
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  57 ++++
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 215 ++++++++++++
 include/dt-bindings/soc/rockchip,vop2.h      |   4 +
 4 files changed, 593 insertions(+), 7 deletions(-)

Comments

Heiko Stübner Nov. 14, 2023, 11:34 p.m. UTC | #1
Hi Andy,

Am Dienstag, 14. November 2023, 12:28:55 CET schrieb Andy Yan:
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> VOP2 on rk3588:
> 
> Four video ports:
> VP0 Max 4096x2160
> VP1 Max 4096x2160
> VP2 Max 4096x2160
> VP3 Max 2048x1080
> 
> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
> 4 4K Esmart windows with line RGB/YUV support
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

not a review yet, but when testing and the display sets a mode,
I always get a bunch of

	rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0

messages in the log (initial mode to console, starting glmark2 from console,
stopping glmark2 to the console).

I'm not sure what is up with that, have you seen these messages as well
at some point?

Thanks
Heiko
Andy Yan Nov. 15, 2023, 2:02 a.m. UTC | #2
Hi Heiko:

On 11/15/23 07:34, Heiko Stübner wrote:
> Hi Andy,
>
> Am Dienstag, 14. November 2023, 12:28:55 CET schrieb Andy Yan:
>> From: Andy Yan <andy.yan@rock-chips.com>
>>
>> VOP2 on rk3588:
>>
>> Four video ports:
>> VP0 Max 4096x2160
>> VP1 Max 4096x2160
>> VP2 Max 4096x2160
>> VP3 Max 2048x1080
>>
>> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
>> 4 4K Esmart windows with line RGB/YUV support
>>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> not a review yet, but when testing and the display sets a mode,
> I always get a bunch of
>
> 	rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
>
> messages in the log (initial mode to console, starting glmark2 from console,
> stopping glmark2 to the console).
>
> I'm not sure what is up with that, have you seen these messages as well
> at some point?

Yes, it will raise POST_BUF_EMPTY when set a mode,  it needs some fix 
like [0]:


I still trying to find a appropriate way to do it with the upstream 
code, as it doesn't affect the

real display function(I must admit that the POST_BUF_EMPTY irq is very 
annoying), so l let  it as

it is in the current version.

By the way, can you see the glmark2 rending on your HDMI monitor now?

[0]https://github.com/Fruit-Pi/kernel/commit/29af993b46f024360e6d02c0d26c9fd3057aa918

>
> Thanks
> Heiko
>
>
>
Heiko Stübner Nov. 15, 2023, 8:24 a.m. UTC | #3
Am Mittwoch, 15. November 2023, 03:02:42 CET schrieb Andy Yan:
> Hi Heiko:
> 
> On 11/15/23 07:34, Heiko Stübner wrote:
> > Hi Andy,
> >
> > Am Dienstag, 14. November 2023, 12:28:55 CET schrieb Andy Yan:
> >> From: Andy Yan <andy.yan@rock-chips.com>
> >>
> >> VOP2 on rk3588:
> >>
> >> Four video ports:
> >> VP0 Max 4096x2160
> >> VP1 Max 4096x2160
> >> VP2 Max 4096x2160
> >> VP3 Max 2048x1080
> >>
> >> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
> >> 4 4K Esmart windows with line RGB/YUV support
> >>
> >> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> > not a review yet, but when testing and the display sets a mode,
> > I always get a bunch of
> >
> > 	rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0
> >
> > messages in the log (initial mode to console, starting glmark2 from console,
> > stopping glmark2 to the console).
> >
> > I'm not sure what is up with that, have you seen these messages as well
> > at some point?
> 
> Yes, it will raise POST_BUF_EMPTY when set a mode,  it needs some fix 
> like [0]:
> 
> 
> I still trying to find a appropriate way to do it with the upstream 
> code, as it doesn't affect the
> 
> real display function(I must admit that the POST_BUF_EMPTY irq is very 
> annoying), so l let  it as
> 
> it is in the current version.

okay, so this is a known thing. So no worries and I'm confident that
you'll figure out a way to do this :-)


> By the way, can you see the glmark2 rending on your HDMI monitor now?

Yes :-D . I do have glmark2 (both es2 and full-gl) running with Boris'
panthor patches [0] merged into my dev-kernel and mesa build
from one his branches [1] .

Heiko


[0] https://gitlab.freedesktop.org/bbrezillon/linux/-/tree/panthor-v3
[1] https://gitlab.freedesktop.org/bbrezillon/mesa/-/tree/v10+panthor-v3+32b+g310+egl15+afrc+afbc?ref_type=heads
Sascha Hauer Nov. 15, 2023, 9:08 a.m. UTC | #4
Hi Andy,

Thanks for your patches, some remarks inline.

On Tue, Nov 14, 2023 at 07:28:55PM +0800, Andy Yan wrote:
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> VOP2 on rk3588:
> 
> Four video ports:
> VP0 Max 4096x2160
> VP1 Max 4096x2160
> VP2 Max 4096x2160
> VP3 Max 2048x1080
> 
> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
> 4 4K Esmart windows with line RGB/YUV support
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 324 ++++++++++++++++++-
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  57 ++++
>  drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 215 ++++++++++++
>  include/dt-bindings/soc/rockchip,vop2.h      |   4 +
>  4 files changed, 593 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> index 0d7dc543bef3..ba61c0233937 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> @@ -191,6 +191,9 @@ struct vop2 {
>  	struct regmap *map;
>  
>  	struct regmap *sys_grf;
> +	struct regmap *vop_grf;
> +	struct regmap *vo1_grf;
> +	struct regmap *sys_pmu;
>  
>  	/* physical map length of vop2 register */
>  	u32 len;
> @@ -209,6 +212,7 @@ struct vop2 {
>  	unsigned int enable_count;
>  	struct clk *hclk;
>  	struct clk *aclk;
> +	struct clk *pclk;
>  
>  	/* optional internal rgb encoder */
>  	struct rockchip_rgb *rgb;
> @@ -217,6 +221,13 @@ struct vop2 {
>  	struct vop2_win win[];
>  };
>  
> +#define vop2_output_if_is_hdmi(x)	(x == ROCKCHIP_VOP2_EP_HDMI0 || x == ROCKCHIP_VOP2_EP_HDMI1)
> +#define vop2_output_if_is_dp(x)		(x == ROCKCHIP_VOP2_EP_DP0 || x == ROCKCHIP_VOP2_EP_DP1)
> +#define vop2_output_if_is_edp(x)	(x == ROCKCHIP_VOP2_EP_EDP0 || x == ROCKCHIP_VOP2_EP_EDP1)
> +#define vop2_output_if_is_mipi(x)	(x == ROCKCHIP_VOP2_EP_MIPI0 || x == ROCKCHIP_VOP2_EP_MIPI1)
> +#define vop2_output_if_is_lvds(x)	(x == ROCKCHIP_VOP2_EP_LVDS0 || x == ROCKCHIP_VOP2_EP_LVDS1)
> +#define vop2_output_if_is_dpi(x)	(x == ROCKCHIP_VOP2_EP_RGB0)
> +
>  static const struct regmap_config vop2_regmap_config;
>  
>  static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc)
> @@ -271,9 +282,12 @@ static bool vop2_cluster_window(const struct vop2_win *win)
>  static void vop2_cfg_done(struct vop2_video_port *vp)
>  {
>  	struct vop2 *vop2 = vp->vop2;
> +	u32 val;
>  
> -	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE,
> -			BIT(vp->id) | RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
> +	val = BIT(vp->id) | (BIT(vp->id) << 16) |
> +		RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN;
> +
> +	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE, val);
>  }
>  
>  static void vop2_win_disable(struct vop2_win *win)
> @@ -863,13 +877,32 @@ static int vop2_core_clks_prepare_enable(struct vop2 *vop2)
>  		goto err;
>  	}
>  
> +	ret = clk_prepare_enable(vop2->pclk);
> +	if (ret < 0) {
> +		drm_err(vop2->drm, "failed to enable pclk - %d\n", ret);
> +		goto err1;
> +	}
> +
>  	return 0;
> +err1:
> +	clk_disable_unprepare(vop2->aclk);
>  err:
>  	clk_disable_unprepare(vop2->hclk);
>  
>  	return ret;
>  }
>  
> +static void vop2_power_domain_all_on(struct vop2 *vop2)

The function name sounds like it would return the current status rather
than enabling them. Better vop2_power_domain_enable_all(). Also a
rk3588_ prefix would be nice.

> +{
> +	u32 pd;
> +
> +	pd = vop2_readl(vop2, RK3588_SYS_PD_CTRL);
> +	pd &= ~(VOP2_PD_CLUSTER0 | VOP2_PD_CLUSTER1 | VOP2_PD_CLUSTER2 |
> +		VOP2_PD_CLUSTER3 | VOP2_PD_ESMART);
> +
> +	vop2_writel(vop2, RK3588_SYS_PD_CTRL, pd);
> +}
> +
>  static void vop2_enable(struct vop2 *vop2)
>  {
>  	int ret;
> @@ -901,6 +934,9 @@ static void vop2_enable(struct vop2 *vop2)
>  	if (vop2->data->soc_id == 3566)
>  		vop2_writel(vop2, RK3568_OTP_WIN_EN, 1);
>  
> +	if (vop2->data->soc_id == 3588)
> +		vop2_power_domain_all_on(vop2);
> +
>  	vop2_writel(vop2, RK3568_REG_CFG_DONE, RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
>  
>  	/*
> @@ -926,6 +962,7 @@ static void vop2_disable(struct vop2 *vop2)
>  
>  	pm_runtime_put_sync(vop2->dev);
>  
> +	clk_disable_unprepare(vop2->pclk);
>  	clk_disable_unprepare(vop2->aclk);
>  	clk_disable_unprepare(vop2->hclk);
>  }
> @@ -1293,7 +1330,11 @@ static void vop2_plane_atomic_update(struct drm_plane *plane,
>  			vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
>  		vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
>  		vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
> -		vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
> +		if (vop2->data->soc_id == 3566 || vop2->data->soc_id == 3568)
> +			vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
> +		else
> +			vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 1);
> +
>  		vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
>  		transform_offset = vop2_afbc_transform_offset(pstate, half_block_en);
>  		vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
> @@ -1481,10 +1522,10 @@ static void vop2_post_config(struct drm_crtc *crtc)
>  	vop2_vp_write(vp, RK3568_VP_DSP_BG, 0);
>  }
>  
> -static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
> -				u32 polflags)
> +static unsigned long rk3568_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
>  {
>  	struct vop2 *vop2 = vp->vop2;
> +	struct drm_crtc *crtc = &vp->crtc;
>  	u32 die, dip;
>  
>  	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
> @@ -1546,13 +1587,257 @@ static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
>  		break;
>  	default:
>  		drm_err(vop2->drm, "Invalid interface id %d on vp%d\n", id, vp->id);
> -		return;
> +		return 0;
> +	}
> +
> +	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
> +
> +	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
> +	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
> +
> +	return crtc->state->adjusted_mode.crtc_clock  * 1000LL;
> +}
> +
> +/*
> + * calc the dclk on rk3588
> + * the available div of dclk is 1, 2, 4
> + */
> +static unsigned long vop2_calc_dclk(unsigned long child_clk, unsigned long max_dclk)
> +{
> +	if (child_clk * 4 <= max_dclk)
> +		return child_clk * 4;
> +	else if (child_clk * 2 <= max_dclk)
> +		return child_clk * 2;
> +	else if (child_clk <= max_dclk)
> +		return child_clk;
> +	else
> +		return 0;
> +}
> +
> +/*
> + * 4 pixclk/cycle on rk3588
> + * RGB/eDP/HDMI: if_pixclk >= dclk_core
> + * DP: dp_pixclk = dclk_out <= dclk_core
> + * DSI: mipi_pixclk <= dclk_out <= dclk_core
> + */
> +static unsigned long vop2_calc_cru_cfg(struct vop2_video_port *vp, int id,
> +				       int *dclk_core_div, int *dclk_out_div,
> +				       int *if_pixclk_div, int *if_dclk_div)

Please add a rk3588_ prefix to all functions that are rk3588 only.

> +{
> +	struct vop2 *vop2 = vp->vop2;
> +	struct drm_crtc *crtc = &vp->crtc;
> +	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
> +	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
> +	int output_mode = vcstate->output_mode;
> +	unsigned long v_pixclk = adjusted_mode->crtc_clock * 1000LL; /* video timing pixclk */
> +	unsigned long dclk_core_rate = v_pixclk >> 2;
> +	unsigned long dclk_rate = v_pixclk;
> +	unsigned long dclk_out_rate;
> +	unsigned long if_dclk_rate;
> +	unsigned long if_pixclk_rate;
> +	int K = 1;
> +
> +	if (vop2_output_if_is_hdmi(id)) {

The vop2_output_if_is_* defines are used only once. Maybe a big:

switch (id) {
	case ROCKCHIP_VOP2_EP_HDMI0:
	case ROCKCHIP_VOP2_EP_HDMI1:
		...
}

would look a bit better overall.

> +		/*
> +		 * K = 2: dclk_core = if_pixclk_rate > if_dclk_rate
> +		 * K = 1: dclk_core = hdmie_edp_dclk > if_pixclk_rate
> +		 */
> +		if (output_mode == ROCKCHIP_OUT_MODE_YUV420) {
> +			dclk_rate = dclk_rate >> 1;
> +			K = 2;
> +		}
> +
> +		if_pixclk_rate = (dclk_core_rate << 1) / K;
> +		if_dclk_rate = dclk_core_rate / K;
> +
> +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
> +		*if_dclk_div = dclk_rate / if_dclk_rate;

Not sure if this will change with future extensions, but currently
*if_pixclk_div will always be 2 and *if_dclk_div will alway be 4,
so maybe better write it like this


> +		*dclk_core_div = dclk_rate / dclk_core_rate;

*dclk_core_div is calculated the same way for all cases. You could pull
this out of the if/else.

> +	} else if (vop2_output_if_is_edp(id)) {
> +		/* edp_pixclk = edp_dclk > dclk_core */
> +		if_pixclk_rate = v_pixclk / K;
> +		if_dclk_rate = v_pixclk / K;

if_dclk_rate is unused here.

> +		dclk_rate = if_pixclk_rate * K;
> +		*dclk_core_div = dclk_rate / dclk_core_rate;
> +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
> +		*if_dclk_div = *if_pixclk_div;

Both *if_pixclk_div and *if_dclk_div will always be 1.

> +	} else if (vop2_output_if_is_dp(id)) {
> +		if (output_mode == ROCKCHIP_OUT_MODE_YUV420)
> +			dclk_out_rate = v_pixclk >> 3;
> +		else
> +			dclk_out_rate = v_pixclk >> 2;
> +
> +		dclk_rate = vop2_calc_dclk(dclk_out_rate, 600000);
> +		if (!dclk_rate) {
> +			drm_err(vop2->drm, "DP dclk_out_rate out of range, dclk_out_rate: %ld KHZ\n",
> +				dclk_out_rate);
> +			return -EINVAL;

This function has return type unsigned long. Also this error is never
checked for by the caller.

> +		}
> +		*dclk_out_div = dclk_rate / dclk_out_rate;
> +		*dclk_core_div = dclk_rate / dclk_core_rate;
> +	} else if (vop2_output_if_is_mipi(id)) {
> +		if_pixclk_rate = dclk_core_rate / K;
> +		/* dclk_core = dclk_out * K = if_pixclk * K = v_pixclk / 4 */
> +		dclk_out_rate = if_pixclk_rate;
> +		/* dclk_rate = N * dclk_core_rate N = (1,2,4 ), we get a little factor here */
> +		dclk_rate = vop2_calc_dclk(dclk_out_rate, 600000);
> +		if (!dclk_rate) {
> +			drm_err(vop2->drm, "MIPI dclk out of range, dclk_out_rate: %ld KHZ\n",
> +				dclk_out_rate);
> +			return -EINVAL;
> +		}
> +		*dclk_out_div = dclk_rate / dclk_out_rate;
> +		*dclk_core_div = dclk_rate / dclk_core_rate;
> +		*if_pixclk_div = 1;       /*mipi pixclk == dclk_out*/
> +	} else if (vop2_output_if_is_dpi(id)) {
> +		dclk_rate = v_pixclk;
> +		*dclk_core_div = dclk_rate / dclk_core_rate;
> +	}
> +
> +	*if_pixclk_div = ilog2(*if_pixclk_div);
> +	*if_dclk_div = ilog2(*if_dclk_div);
> +	*dclk_core_div = ilog2(*dclk_core_div);
> +	*dclk_out_div = ilog2(*dclk_out_div);
> +
> +	drm_dbg(vop2->drm, "dclk:%ld, pixclk_div;%d,dclk_div:%d\n",

Replace ';' with ':' in the format string, some whitespaces are missing.

> +		dclk_rate, *if_pixclk_div, *if_dclk_div);
> +
> +	return dclk_rate;
> +}
> +
> +/*
> + * MIPI port mux on rk3588:
> + * 0: Video Port2
> + * 1: Video Port3
> + * 3: Video Port 1(MIPI1 only)
> + */
> +static u32 rk3588_get_mipi_port_mux(int vp_id)
> +{
> +	if (vp_id == 1)
> +		return 3;
> +	else if (vp_id == 3)
> +		return 1;
> +	else
> +		return 0;
> +}
> +
> +static u32 rk3588_get_hdmi_pol(u32 flags)
> +{
> +	u32 val;
> +
> +	val = (flags & DRM_MODE_FLAG_NHSYNC) ? BIT(HSYNC_POSITIVE) : 0;
> +	val |= (flags & DRM_MODE_FLAG_NVSYNC) ? BIT(VSYNC_POSITIVE) : 0;
> +
> +	return val;
> +}
> +
> +static unsigned long rk3588_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
> +{
> +	struct vop2 *vop2 = vp->vop2;
> +	int dclk_core_div, dclk_out_div, if_pixclk_div, if_dclk_div;
> +	unsigned long clock;
> +	u32 die, dip, div, vp_clk_div, val;
> +
> +	clock = vop2_calc_cru_cfg(vp, id, &dclk_core_div, &dclk_out_div,
> +				  &if_pixclk_div, &if_dclk_div);
> +
> +	vp_clk_div = FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_CORE_DIV, dclk_core_div);
> +	vp_clk_div |= FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_OUT_DIV, dclk_out_div);
> +
> +	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
> +	dip = vop2_readl(vop2, RK3568_DSP_IF_POL);
> +	div = vop2_readl(vop2, RK3568_DSP_IF_CTRL);
> +
> +	switch (id) {
> +	case ROCKCHIP_VOP2_EP_HDMI0:
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
> +		die |= RK3588_SYS_DSP_INFACE_EN_HDMI0 |
> +			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
> +		val = rk3588_get_hdmi_pol(polflags);
> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 1, 1));
> +		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 6, 5));
> +		break;
> +	case ROCKCHIP_VOP2_EP_HDMI1:
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI1_DCLK_DIV, if_dclk_div);
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI1_PCLK_DIV, if_pixclk_div);
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX;
> +		die |= RK3588_SYS_DSP_INFACE_EN_HDMI1 |
> +			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX, vp->id);
> +		val = rk3588_get_hdmi_pol(polflags);
> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 4, 4));
> +		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 8, 7));
> +		break;
> +	case ROCKCHIP_VOP2_EP_EDP0:
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
> +		die |= RK3588_SYS_DSP_INFACE_EN_EDP0 |
> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 0, 0));
> +		break;
> +	case ROCKCHIP_VOP2_EP_EDP1:
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX;
> +		die |= RK3588_SYS_DSP_INFACE_EN_EDP1 |
> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX, vp->id);
> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 3, 3));
> +		break;
> +	case ROCKCHIP_VOP2_EP_MIPI0:
> +		div |= FIELD_PREP(RK3588_DSP_IF_MIPI0_PCLK_DIV, if_pixclk_div);
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX;
> +		val = rk3588_get_mipi_port_mux(vp->id);
> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI0 |
> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX, !!val);
> +		break;
> +	case ROCKCHIP_VOP2_EP_MIPI1:
> +		div |= FIELD_PREP(RK3588_DSP_IF_MIPI1_PCLK_DIV, if_pixclk_div);
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX;
> +		val = rk3588_get_mipi_port_mux(vp->id);
> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI1 |
> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX, val);
> +		break;
> +	case ROCKCHIP_VOP2_EP_DP0:
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_DP0_MUX;
> +		die |= RK3588_SYS_DSP_INFACE_EN_DP0 |
> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_DP0_MUX, vp->id);
> +		dip &= ~RK3588_DSP_IF_POL__DP0_PIN_POL;
> +		dip |= FIELD_PREP(RK3588_DSP_IF_POL__DP0_PIN_POL, polflags);
> +		break;
> +	case ROCKCHIP_VOP2_EP_DP1:
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX;
> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI1 |
> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX, vp->id);
> +		dip &= ~RK3588_DSP_IF_POL__DP1_PIN_POL;
> +		dip |= FIELD_PREP(RK3588_DSP_IF_POL__DP1_PIN_POL, polflags);
> +		break;
> +	default:
> +		drm_err(vop2->drm, "Invalid interface id %d on vp%d\n", id, vp->id);
> +		return 0;
>  	}
>  
>  	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
>  
> +	vop2_vp_write(vp, RK3588_VP_CLK_CTRL, vp_clk_div);
>  	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
> +	vop2_writel(vop2, RK3568_DSP_IF_CTRL, div);
>  	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
> +
> +	return clock;
> +}
> +
> +static unsigned long vop2_set_intf_mux(struct vop2_video_port *vp, int ep_id, u32 polflags)
> +{
> +	struct vop2 *vop2 = vp->vop2;
> +
> +	if (vop2->data->soc_id == 3566 || vop2->data->soc_id == 3568)
> +		return rk3568_set_intf_mux(vp, ep_id, polflags);
> +	else if (vop2->data->soc_id == 3588)
> +		return rk3588_set_intf_mux(vp, ep_id, polflags);
> +	else
> +		return 0;
>  }
>  
>  static int us_to_vertical_line(struct drm_display_mode *mode, int us)
> @@ -1622,7 +1907,7 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
>  	drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
>  		struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
>  
> -		rk3568_set_intf_mux(vp, rkencoder->crtc_endpoint_id, polflags);
> +		clock = vop2_set_intf_mux(vp, rkencoder->crtc_endpoint_id, polflags);

clock is set to potentially different values in this loop and the last
value is taken. Without a further description or check this looks wrong.

>  	}
>  
>  	if (vcstate->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
> @@ -2011,6 +2296,14 @@ static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
>  			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER1;
>  			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER1, vp->id);
>  			break;
> +		case ROCKCHIP_VOP2_CLUSTER2:
> +			port_sel &= ~RK3588_OVL_PORT_SEL__CLUSTER2;
> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__CLUSTER2, vp->id);
> +			break;
> +		case ROCKCHIP_VOP2_CLUSTER3:
> +			port_sel &= ~RK3588_OVL_PORT_SEL__CLUSTER3;
> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__CLUSTER3, vp->id);
> +			break;
>  		case ROCKCHIP_VOP2_ESMART0:
>  			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART0;
>  			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART0, vp->id);
> @@ -2019,6 +2312,14 @@ static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
>  			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART1;
>  			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART1, vp->id);
>  			break;
> +		case ROCKCHIP_VOP2_ESMART2:
> +			port_sel &= ~RK3588_OVL_PORT_SEL__ESMART2;
> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__ESMART2, vp->id);
> +			break;
> +		case ROCKCHIP_VOP2_ESMART3:
> +			port_sel &= ~RK3588_OVL_PORT_SEL__ESMART3;
> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__ESMART3, vp->id);
> +			break;
>  		case ROCKCHIP_VOP2_SMART0:
>  			port_sel &= ~RK3568_OVL_PORT_SEL__SMART0;
>  			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART0, vp->id);
> @@ -2760,6 +3061,9 @@ static int vop2_bind(struct device *dev, struct device *master, void *data)
>  	}
>  
>  	vop2->sys_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");

This already lacks an error check, shame on me...

> +	vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
> +	vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
> +	vop2->sys_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pmu");

... but please don't duplicate that.

>  
>  	vop2->hclk = devm_clk_get(vop2->dev, "hclk");
>  	if (IS_ERR(vop2->hclk)) {
> @@ -2773,6 +3077,12 @@ static int vop2_bind(struct device *dev, struct device *master, void *data)
>  		return PTR_ERR(vop2->aclk);
>  	}
>  
> +	vop2->pclk = devm_clk_get_optional(vop2->dev, "pclk_vop");
> +	if (IS_ERR(vop2->pclk)) {
> +		drm_err(vop2->drm, "failed to get pclk source\n");
> +		return PTR_ERR(vop2->pclk);
> +	}
> +
>  	vop2->irq = platform_get_irq(pdev, 0);
>  	if (vop2->irq < 0) {
>  		drm_err(vop2->drm, "cannot find irq for vop2\n");
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
> index 7175f46a2014..2fffe580b215 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
> @@ -16,6 +16,7 @@
>  #define WIN_FEATURE_AFBDC		BIT(0)
>  #define WIN_FEATURE_CLUSTER		BIT(1)
>  
> +#define HIWORD_UPDATE(v, h, l)  ((GENMASK(h, l) << 16) | ((v) << (l)))
>  /*
>   *  the delay number of a window in different mode.
>   */
> @@ -38,6 +39,18 @@ enum vop2_scale_down_mode {
>  	VOP2_SCALE_DOWN_AVG,
>  };
>  
> +/*
> + * vop2 internal power domain id,
> + * should be all none zero, 0 will be treat as invalid;
> + */
> +#define VOP2_PD_CLUSTER0	BIT(0)
> +#define VOP2_PD_CLUSTER1	BIT(1)
> +#define VOP2_PD_CLUSTER2	BIT(2)
> +#define VOP2_PD_CLUSTER3	BIT(3)
> +#define VOP2_PD_DSC_8K		BIT(5)
> +#define VOP2_PD_DSC_4K		BIT(6)
> +#define VOP2_PD_ESMART		BIT(7)
> +
>  enum vop2_win_regs {
>  	VOP2_WIN_ENABLE,
>  	VOP2_WIN_FORMAT,
> @@ -192,6 +205,11 @@ enum dst_factor_mode {
>  };
>  
>  #define RK3568_GRF_VO_CON1			0x0364
> +
> +#define RK3588_GRF_SOC_CON1			0x0304
> +#define RK3588_GRF_VOP_CON2			0x08
> +#define RK3588_GRF_VO1_CON0			0x00
> +
>  /* System registers definition */
>  #define RK3568_REG_CFG_DONE			0x000
>  #define RK3568_VERSION_INFO			0x004
> @@ -200,6 +218,7 @@ enum dst_factor_mode {
>  #define RK3568_DSP_IF_EN			0x028
>  #define RK3568_DSP_IF_CTRL			0x02c
>  #define RK3568_DSP_IF_POL			0x030
> +#define RK3588_SYS_PD_CTRL			0x034
>  #define RK3568_WB_CTRL				0x40
>  #define RK3568_WB_XSCAL_FACTOR			0x44
>  #define RK3568_WB_YRGB_MST			0x48
> @@ -223,6 +242,7 @@ enum dst_factor_mode {
>  #define RK3568_VP_DSP_CTRL			0x00
>  #define RK3568_VP_MIPI_CTRL			0x04
>  #define RK3568_VP_COLOR_BAR_CTRL		0x08
> +#define RK3588_VP_CLK_CTRL			0x0C
>  #define RK3568_VP_3D_LUT_CTRL			0x10
>  #define RK3568_VP_3D_LUT_MST			0x20
>  #define RK3568_VP_DSP_BG			0x2C
> @@ -364,6 +384,9 @@ enum dst_factor_mode {
>  #define RK3568_VP_DSP_CTRL__CORE_DCLK_DIV		BIT(4)
>  #define RK3568_VP_DSP_CTRL__OUT_MODE			GENMASK(3, 0)
>  
> +#define RK3588_VP_CLK_CTRL__DCLK_OUT_DIV		GENMASK(3, 2)
> +#define RK3588_VP_CLK_CTRL__DCLK_CORE_DIV		GENMASK(1, 0)
> +
>  #define RK3568_VP_POST_SCL_CTRL__VSCALEDOWN		BIT(1)
>  #define RK3568_VP_POST_SCL_CTRL__HSCALEDOWN		BIT(0)
>  
> @@ -382,11 +405,37 @@ enum dst_factor_mode {
>  #define RK3568_SYS_DSP_INFACE_EN_HDMI			BIT(1)
>  #define RK3568_SYS_DSP_INFACE_EN_RGB			BIT(0)
>  
> +#define RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX		GENMASK(22, 21)
> +#define RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX		GENMASK(20, 20)
> +#define RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX		GENMASK(19, 18)
> +#define RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX		GENMASK(17, 16)
> +#define RK3588_SYS_DSP_INFACE_EN_DP1_MUX		GENMASK(15, 14)
> +#define RK3588_SYS_DSP_INFACE_EN_DP0_MUX		GENMASK(13, 12)
> +#define RK3588_SYS_DSP_INFACE_EN_DPI			GENMASK(9, 8)
> +#define RK3588_SYS_DSP_INFACE_EN_MIPI1			BIT(7)
> +#define RK3588_SYS_DSP_INFACE_EN_MIPI0			BIT(6)
> +#define RK3588_SYS_DSP_INFACE_EN_HDMI1			BIT(5)
> +#define RK3588_SYS_DSP_INFACE_EN_EDP1			BIT(4)
> +#define RK3588_SYS_DSP_INFACE_EN_HDMI0			BIT(3)
> +#define RK3588_SYS_DSP_INFACE_EN_EDP0			BIT(2)
> +#define RK3588_SYS_DSP_INFACE_EN_DP1			BIT(1)
> +#define RK3588_SYS_DSP_INFACE_EN_DP0			BIT(0)
> +
> +#define RK3588_DSP_IF_MIPI1_PCLK_DIV			GENMASK(27, 26)
> +#define RK3588_DSP_IF_MIPI0_PCLK_DIV			GENMASK(25, 24)
> +#define RK3588_DSP_IF_EDP_HDMI1_PCLK_DIV		GENMASK(22, 22)
> +#define RK3588_DSP_IF_EDP_HDMI1_DCLK_DIV		GENMASK(21, 20)
> +#define RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV		GENMASK(18, 18)
> +#define RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV		GENMASK(17, 16)
> +
>  #define RK3568_DSP_IF_POL__MIPI_PIN_POL			GENMASK(19, 16)
>  #define RK3568_DSP_IF_POL__EDP_PIN_POL			GENMASK(15, 12)
>  #define RK3568_DSP_IF_POL__HDMI_PIN_POL			GENMASK(7, 4)
>  #define RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL		GENMASK(3, 0)
>  
> +#define RK3588_DSP_IF_POL__DP1_PIN_POL			GENMASK(14, 12)
> +#define RK3588_DSP_IF_POL__DP0_PIN_POL			GENMASK(10, 8)
> +
>  #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2_PHASE_LOCK	BIT(5)
>  #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2			BIT(4)
>  
> @@ -407,8 +456,12 @@ enum dst_factor_mode {
>  #define RK3568_OVL_PORT_SEL__SEL_PORT			GENMASK(31, 16)
>  #define RK3568_OVL_PORT_SEL__SMART1			GENMASK(31, 30)
>  #define RK3568_OVL_PORT_SEL__SMART0			GENMASK(29, 28)
> +#define RK3588_OVL_PORT_SEL__ESMART3			GENMASK(31, 30)
> +#define RK3588_OVL_PORT_SEL__ESMART2			GENMASK(29, 28)
>  #define RK3568_OVL_PORT_SEL__ESMART1			GENMASK(27, 26)
>  #define RK3568_OVL_PORT_SEL__ESMART0			GENMASK(25, 24)
> +#define RK3588_OVL_PORT_SEL__CLUSTER3			GENMASK(23, 22)
> +#define RK3588_OVL_PORT_SEL__CLUSTER2			GENMASK(21, 20)
>  #define RK3568_OVL_PORT_SEL__CLUSTER1			GENMASK(19, 18)
>  #define RK3568_OVL_PORT_SEL__CLUSTER0			GENMASK(17, 16)
>  #define RK3568_OVL_PORT_SET__PORT2_MUX			GENMASK(11, 8)
> @@ -421,6 +474,10 @@ enum dst_factor_mode {
>  #define RK3568_CLUSTER_DLY_NUM__CLUSTER0_1		GENMASK(15, 8)
>  #define RK3568_CLUSTER_DLY_NUM__CLUSTER0_0		GENMASK(7, 0)
>  
> +#define RK3568_CLUSTER_WIN_CTRL0__WIN0_EN		BIT(0)
> +
> +#define RK3568_SMART_REGION0_CTRL__WIN0_EN		BIT(0)
> +
>  #define RK3568_SMART_DLY_NUM__SMART1			GENMASK(31, 24)
>  #define RK3568_SMART_DLY_NUM__SMART0			GENMASK(23, 16)
>  #define RK3568_SMART_DLY_NUM__ESMART1			GENMASK(15, 8)
> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> index 22288ad7f326..4745a9260cf8 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> @@ -34,6 +34,28 @@ static const uint32_t formats_cluster[] = {
>  	DRM_FORMAT_Y210, /* yuv422_10bit non-Linear mode only */
>  };
>  
> +static const uint32_t formats_esmart[] = {
> +	DRM_FORMAT_XRGB8888,
> +	DRM_FORMAT_ARGB8888,
> +	DRM_FORMAT_XBGR8888,
> +	DRM_FORMAT_ABGR8888,
> +	DRM_FORMAT_RGB888,
> +	DRM_FORMAT_BGR888,
> +	DRM_FORMAT_RGB565,
> +	DRM_FORMAT_BGR565,
> +	DRM_FORMAT_NV12, /* yuv420_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV21, /* yvu420_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV16, /* yuv422_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV61, /* yvu422_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV24, /* yuv444_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV42, /* yvu444_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV15, /* yuv420_10bit linear mode, 2 plane, no padding */
> +	DRM_FORMAT_YVYU, /* yuv422_8bit[YVYU] linear mode */
> +	DRM_FORMAT_VYUY, /* yuv422_8bit[VYUY] linear mode */
> +	DRM_FORMAT_YUYV, /* yuv422_8bit[YUYV] linear mode */
> +	DRM_FORMAT_UYVY, /* yuv422_8bit[UYVY] linear mode */
> +};
> +
>  static const uint32_t formats_rk356x_esmart[] = {
>  	DRM_FORMAT_XRGB8888,
>  	DRM_FORMAT_ARGB8888,
> @@ -234,6 +256,186 @@ static const struct vop2_win_data rk3568_vop_win_data[] = {
>  	},
>  };
>  
> +static const struct vop2_video_port_data rk3588_vop_video_ports[] = {
> +	{
> +		.id = 0,
> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
> +		.gamma_lut_len = 1024,
> +		.cubic_lut_len = 9 * 9 * 9, /* 9x9x9 */
> +		.max_output = { 4096, 2304 },
> +		/* hdr2sdr sdr2hdr hdr2hdr sdr2sdr */
> +		.pre_scan_max_dly = { 76, 65, 65, 54 },
> +		.offset = 0xc00,
> +	}, {
> +		.id = 1,
> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
> +		.gamma_lut_len = 1024,
> +		.cubic_lut_len = 729, /* 9x9x9 */
> +		.max_output = { 4096, 2304 },
> +		.pre_scan_max_dly = { 76, 65, 65, 54 },
> +		.offset = 0xd00,
> +	}, {
> +		.id = 2,
> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
> +		.gamma_lut_len = 1024,
> +		.cubic_lut_len = 17 * 17 * 17, /* 17x17x17 */
> +		.max_output = { 4096, 2304 },
> +		.pre_scan_max_dly = { 52, 52, 52, 52 },
> +		.offset = 0xe00,
> +	}, {
> +		.id = 3,
> +		.gamma_lut_len = 1024,
> +		.max_output = { 2048, 1536 },
> +		.pre_scan_max_dly = { 52, 52, 52, 52 },
> +		.offset = 0xf00,
> +	},
> +};
> +
> +/*
> + * rk3588 vop with 4 cluster, 4 esmart win.
> + * Every cluster can work as 4K win or split into two win.
> + * All win in cluster support AFBCD.
> + *
> + * Every esmart win and smart win support 4 Multi-region.
> + *
> + * Scale filter mode:
> + *
> + * * Cluster:  bicubic for horizontal scale up, others use bilinear
> + * * ESmart:
> + *    * nearest-neighbor/bilinear/bicubic for scale up
> + *    * nearest-neighbor/bilinear/average for scale down
> + *
> + * AXI Read ID assignment:
> + * Two AXI bus:
> + * AXI0 is a read/write bus with a higher performance.
> + * AXI1 is a read only bus.
> + *
> + * Every window on a AXI bus must assigned two unique
> + * read id(yrgb_id/uv_id, valid id are 0x1~0xe).
> + *
> + * AXI0:
> + * Cluster0/1, Esmart0/1, WriteBack
> + *
> + * AXI 1:
> + * Cluster2/3, Esmart2/3
> + *
> + */
> +static const struct vop2_win_data rk3588_vop_win_data[] = {
> +	{
> +		.name = "Cluster0-win0",
> +		.phys_id = ROCKCHIP_VOP2_CLUSTER0,
> +		.base = 0x1000,
> +		.formats = formats_cluster,
> +		.nformats = ARRAY_SIZE(formats_cluster),
> +		.format_modifiers = format_modifiers_afbc,
> +		.layer_sel_id = 0,
> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
> +		.max_upscale_factor = 4,
> +		.max_downscale_factor = 4,
> +		.dly = { 4, 26, 29 },
> +		.type = DRM_PLANE_TYPE_PRIMARY,
> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
> +	}, {
> +		.name = "Cluster1-win0",
> +		.phys_id = ROCKCHIP_VOP2_CLUSTER1,
> +		.base = 0x1200,
> +		.formats = formats_cluster,
> +		.nformats = ARRAY_SIZE(formats_cluster),
> +		.format_modifiers = format_modifiers_afbc,
> +		.layer_sel_id = 1,
> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
> +		.type = DRM_PLANE_TYPE_PRIMARY,
> +		.max_upscale_factor = 4,
> +		.max_downscale_factor = 4,
> +		.dly = { 4, 26, 29 },
> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
> +	}, {
> +		.name = "Cluster2-win0",
> +		.phys_id = ROCKCHIP_VOP2_CLUSTER2,
> +		.base = 0x1400,
> +		.formats = formats_cluster,
> +		.nformats = ARRAY_SIZE(formats_cluster),
> +		.format_modifiers = format_modifiers_afbc,
> +		.layer_sel_id = 4,
> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
> +		.type = DRM_PLANE_TYPE_PRIMARY,
> +		.max_upscale_factor = 4,
> +		.max_downscale_factor = 4,
> +		.dly = { 4, 26, 29 },
> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
> +	}, {
> +		.name = "Cluster3-win0",
> +		.phys_id = ROCKCHIP_VOP2_CLUSTER3,
> +		.base = 0x1600,
> +		.formats = formats_cluster,
> +		.nformats = ARRAY_SIZE(formats_cluster),
> +		.format_modifiers = format_modifiers_afbc,
> +		.layer_sel_id = 5,
> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
> +		.type = DRM_PLANE_TYPE_PRIMARY,
> +		.max_upscale_factor = 4,
> +		.max_downscale_factor = 4,
> +		.dly = { 4, 26, 29 },
> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
> +	}, {
> +		.name = "Esmart0-win0",
> +		.phys_id = ROCKCHIP_VOP2_ESMART0,
> +		.formats = formats_esmart,
> +		.nformats = ARRAY_SIZE(formats_esmart),
> +		.format_modifiers = format_modifiers,
> +		.base = 0x1800,
> +		.layer_sel_id = 2,
> +		.supported_rotations = DRM_MODE_REFLECT_Y,
> +		.type = DRM_PLANE_TYPE_OVERLAY,
> +		.max_upscale_factor = 8,
> +		.max_downscale_factor = 8,
> +		.dly = { 23, 45, 48 },
> +	}, {
> +		.name = "Esmart1-win0",
> +		.phys_id = ROCKCHIP_VOP2_ESMART1,
> +		.formats = formats_esmart,
> +		.nformats = ARRAY_SIZE(formats_esmart),
> +		.format_modifiers = format_modifiers,
> +		.base = 0x1a00,
> +		.layer_sel_id = 3,
> +		.supported_rotations = DRM_MODE_REFLECT_Y,
> +		.type = DRM_PLANE_TYPE_OVERLAY,
> +		.max_upscale_factor = 8,
> +		.max_downscale_factor = 8,
> +		.dly = { 23, 45, 48 },
> +	}, {
> +		.name = "Esmart2-win0",
> +		.phys_id = ROCKCHIP_VOP2_ESMART2,
> +		.base = 0x1c00,
> +		.formats = formats_esmart,
> +		.nformats = ARRAY_SIZE(formats_esmart),
> +		.format_modifiers = format_modifiers,
> +		.layer_sel_id = 6,
> +		.supported_rotations = DRM_MODE_REFLECT_Y,
> +		.type = DRM_PLANE_TYPE_OVERLAY,
> +		.max_upscale_factor = 8,
> +		.max_downscale_factor = 8,
> +		.dly = { 23, 45, 48 },
> +	}, {
> +		.name = "Esmart3-win0",
> +		.phys_id = ROCKCHIP_VOP2_ESMART3,
> +		.formats = formats_esmart,
> +		.nformats = ARRAY_SIZE(formats_esmart),
> +		.format_modifiers = format_modifiers,
> +		.base = 0x1e00,
> +		.layer_sel_id = 7,
> +		.supported_rotations = DRM_MODE_REFLECT_Y,
> +		.type = DRM_PLANE_TYPE_OVERLAY,
> +		.max_upscale_factor = 8,
> +		.max_downscale_factor = 8,
> +		.dly = { 23, 45, 48 },
> +	},
> +};
> +
>  static const struct vop2_data rk3566_vop = {
>  	.nr_vps = 3,
>  	.max_input = { 4096, 2304 },
> @@ -254,6 +456,16 @@ static const struct vop2_data rk3568_vop = {
>  	.soc_id = 3568,
>  };
>  
> +static const struct vop2_data rk3588_vop = {
> +	.nr_vps = 4,
> +	.max_input = { 4096, 4320 },
> +	.max_output = { 4096, 4320 },
> +	.vp = rk3588_vop_video_ports,
> +	.win = rk3588_vop_win_data,
> +	.win_size = ARRAY_SIZE(rk3588_vop_win_data),
> +	.soc_id = 3588,
> +};
> +
>  static const struct of_device_id vop2_dt_match[] = {
>  	{
>  		.compatible = "rockchip,rk3566-vop",
> @@ -261,6 +473,9 @@ static const struct of_device_id vop2_dt_match[] = {
>  	}, {
>  		.compatible = "rockchip,rk3568-vop",
>  		.data = &rk3568_vop,
> +	}, {
> +		.compatible = "rockchip,rk3588-vop",
> +		.data = &rk3588_vop
>  	}, {
>  	},
>  };
> diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
> index 6e66a802b96a..668f199df9f0 100644
> --- a/include/dt-bindings/soc/rockchip,vop2.h
> +++ b/include/dt-bindings/soc/rockchip,vop2.h
> @@ -10,5 +10,9 @@
>  #define ROCKCHIP_VOP2_EP_LVDS0	5
>  #define ROCKCHIP_VOP2_EP_MIPI1	6
>  #define ROCKCHIP_VOP2_EP_LVDS1	7
> +#define ROCKCHIP_VOP2_EP_HDMI1	8
> +#define ROCKCHIP_VOP2_EP_EDP1	9
> +#define ROCKCHIP_VOP2_EP_DP0	10
> +#define ROCKCHIP_VOP2_EP_DP1	11
>  
>  #endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
> -- 
> 2.34.1
> 
>
Andy Yan Nov. 16, 2023, 7:24 a.m. UTC | #5
Hi Sascha:

  Thanks for your review.

  Let's confirm your remarks in function vop2_calc_cru_cfg fist,

others are small nits I think can be easy to address.

On 11/15/23 17:08, Sascha Hauer wrote:
> Hi Andy,
>
> Thanks for your patches, some remarks inline.
>
> On Tue, Nov 14, 2023 at 07:28:55PM +0800, Andy Yan wrote:
>> From: Andy Yan <andy.yan@rock-chips.com>
>>
>> VOP2 on rk3588:
>>
>> Four video ports:
>> VP0 Max 4096x2160
>> VP1 Max 4096x2160
>> VP2 Max 4096x2160
>> VP3 Max 2048x1080
>>
>> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
>> 4 4K Esmart windows with line RGB/YUV support
>>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>> ---
>>
>>   drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 324 ++++++++++++++++++-
>>   drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  57 ++++
>>   drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 215 ++++++++++++
>>   include/dt-bindings/soc/rockchip,vop2.h      |   4 +
>>   4 files changed, 593 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> index 0d7dc543bef3..ba61c0233937 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> @@ -191,6 +191,9 @@ struct vop2 {
>>   	struct regmap *map;
>>   
>>   	struct regmap *sys_grf;
>> +	struct regmap *vop_grf;
>> +	struct regmap *vo1_grf;
>> +	struct regmap *sys_pmu;
>>   
>>   	/* physical map length of vop2 register */
>>   	u32 len;
>> @@ -209,6 +212,7 @@ struct vop2 {
>>   	unsigned int enable_count;
>>   	struct clk *hclk;
>>   	struct clk *aclk;
>> +	struct clk *pclk;
>>   
>>   	/* optional internal rgb encoder */
>>   	struct rockchip_rgb *rgb;
>> @@ -217,6 +221,13 @@ struct vop2 {
>>   	struct vop2_win win[];
>>   };
>>   
>> +#define vop2_output_if_is_hdmi(x)	(x == ROCKCHIP_VOP2_EP_HDMI0 || x == ROCKCHIP_VOP2_EP_HDMI1)
>> +#define vop2_output_if_is_dp(x)		(x == ROCKCHIP_VOP2_EP_DP0 || x == ROCKCHIP_VOP2_EP_DP1)
>> +#define vop2_output_if_is_edp(x)	(x == ROCKCHIP_VOP2_EP_EDP0 || x == ROCKCHIP_VOP2_EP_EDP1)
>> +#define vop2_output_if_is_mipi(x)	(x == ROCKCHIP_VOP2_EP_MIPI0 || x == ROCKCHIP_VOP2_EP_MIPI1)
>> +#define vop2_output_if_is_lvds(x)	(x == ROCKCHIP_VOP2_EP_LVDS0 || x == ROCKCHIP_VOP2_EP_LVDS1)
>> +#define vop2_output_if_is_dpi(x)	(x == ROCKCHIP_VOP2_EP_RGB0)
>> +
>>   static const struct regmap_config vop2_regmap_config;
>>   
>>   static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc)
>> @@ -271,9 +282,12 @@ static bool vop2_cluster_window(const struct vop2_win *win)
>>   static void vop2_cfg_done(struct vop2_video_port *vp)
>>   {
>>   	struct vop2 *vop2 = vp->vop2;
>> +	u32 val;
>>   
>> -	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE,
>> -			BIT(vp->id) | RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
>> +	val = BIT(vp->id) | (BIT(vp->id) << 16) |
>> +		RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN;
>> +
>> +	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE, val);
>>   }
>>   
>>   static void vop2_win_disable(struct vop2_win *win)
>> @@ -863,13 +877,32 @@ static int vop2_core_clks_prepare_enable(struct vop2 *vop2)
>>   		goto err;
>>   	}
>>   
>> +	ret = clk_prepare_enable(vop2->pclk);
>> +	if (ret < 0) {
>> +		drm_err(vop2->drm, "failed to enable pclk - %d\n", ret);
>> +		goto err1;
>> +	}
>> +
>>   	return 0;
>> +err1:
>> +	clk_disable_unprepare(vop2->aclk);
>>   err:
>>   	clk_disable_unprepare(vop2->hclk);
>>   
>>   	return ret;
>>   }
>>   
>> +static void vop2_power_domain_all_on(struct vop2 *vop2)
> The function name sounds like it would return the current status rather
> than enabling them. Better vop2_power_domain_enable_all(). Also a
> rk3588_ prefix would be nice.
>
>> +{
>> +	u32 pd;
>> +
>> +	pd = vop2_readl(vop2, RK3588_SYS_PD_CTRL);
>> +	pd &= ~(VOP2_PD_CLUSTER0 | VOP2_PD_CLUSTER1 | VOP2_PD_CLUSTER2 |
>> +		VOP2_PD_CLUSTER3 | VOP2_PD_ESMART);
>> +
>> +	vop2_writel(vop2, RK3588_SYS_PD_CTRL, pd);
>> +}
>> +
>>   static void vop2_enable(struct vop2 *vop2)
>>   {
>>   	int ret;
>> @@ -901,6 +934,9 @@ static void vop2_enable(struct vop2 *vop2)
>>   	if (vop2->data->soc_id == 3566)
>>   		vop2_writel(vop2, RK3568_OTP_WIN_EN, 1);
>>   
>> +	if (vop2->data->soc_id == 3588)
>> +		vop2_power_domain_all_on(vop2);
>> +
>>   	vop2_writel(vop2, RK3568_REG_CFG_DONE, RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
>>   
>>   	/*
>> @@ -926,6 +962,7 @@ static void vop2_disable(struct vop2 *vop2)
>>   
>>   	pm_runtime_put_sync(vop2->dev);
>>   
>> +	clk_disable_unprepare(vop2->pclk);
>>   	clk_disable_unprepare(vop2->aclk);
>>   	clk_disable_unprepare(vop2->hclk);
>>   }
>> @@ -1293,7 +1330,11 @@ static void vop2_plane_atomic_update(struct drm_plane *plane,
>>   			vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
>>   		vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
>>   		vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
>> -		vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
>> +		if (vop2->data->soc_id == 3566 || vop2->data->soc_id == 3568)
>> +			vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
>> +		else
>> +			vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 1);
>> +
>>   		vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
>>   		transform_offset = vop2_afbc_transform_offset(pstate, half_block_en);
>>   		vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
>> @@ -1481,10 +1522,10 @@ static void vop2_post_config(struct drm_crtc *crtc)
>>   	vop2_vp_write(vp, RK3568_VP_DSP_BG, 0);
>>   }
>>   
>> -static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
>> -				u32 polflags)
>> +static unsigned long rk3568_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
>>   {
>>   	struct vop2 *vop2 = vp->vop2;
>> +	struct drm_crtc *crtc = &vp->crtc;
>>   	u32 die, dip;
>>   
>>   	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
>> @@ -1546,13 +1587,257 @@ static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
>>   		break;
>>   	default:
>>   		drm_err(vop2->drm, "Invalid interface id %d on vp%d\n", id, vp->id);
>> -		return;
>> +		return 0;
>> +	}
>> +
>> +	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
>> +
>> +	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
>> +	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
>> +
>> +	return crtc->state->adjusted_mode.crtc_clock  * 1000LL;
>> +}
>> +
>> +/*
>> + * calc the dclk on rk3588
>> + * the available div of dclk is 1, 2, 4
>> + */
>> +static unsigned long vop2_calc_dclk(unsigned long child_clk, unsigned long max_dclk)
>> +{
>> +	if (child_clk * 4 <= max_dclk)
>> +		return child_clk * 4;
>> +	else if (child_clk * 2 <= max_dclk)
>> +		return child_clk * 2;
>> +	else if (child_clk <= max_dclk)
>> +		return child_clk;
>> +	else
>> +		return 0;
>> +}
>> +
>> +/*
>> + * 4 pixclk/cycle on rk3588
>> + * RGB/eDP/HDMI: if_pixclk >= dclk_core
>> + * DP: dp_pixclk = dclk_out <= dclk_core
>> + * DSI: mipi_pixclk <= dclk_out <= dclk_core
>> + */
>> +static unsigned long vop2_calc_cru_cfg(struct vop2_video_port *vp, int id,
>> +				       int *dclk_core_div, int *dclk_out_div,
>> +				       int *if_pixclk_div, int *if_dclk_div)
> Please add a rk3588_ prefix to all functions that are rk3588 only.
>
>> +{
>> +	struct vop2 *vop2 = vp->vop2;
>> +	struct drm_crtc *crtc = &vp->crtc;
>> +	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
>> +	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
>> +	int output_mode = vcstate->output_mode;
>> +	unsigned long v_pixclk = adjusted_mode->crtc_clock * 1000LL; /* video timing pixclk */
>> +	unsigned long dclk_core_rate = v_pixclk >> 2;
>> +	unsigned long dclk_rate = v_pixclk;
>> +	unsigned long dclk_out_rate;
>> +	unsigned long if_dclk_rate;
>> +	unsigned long if_pixclk_rate;
>> +	int K = 1;
>> +
>> +	if (vop2_output_if_is_hdmi(id)) {
> The vop2_output_if_is_* defines are used only once. Maybe a big:
>
> switch (id) {
> 	case ROCKCHIP_VOP2_EP_HDMI0:
> 	case ROCKCHIP_VOP2_EP_HDMI1:
> 		...
> }
>
> would look a bit better overall.
>
>> +		/*
>> +		 * K = 2: dclk_core = if_pixclk_rate > if_dclk_rate
>> +		 * K = 1: dclk_core = hdmie_edp_dclk > if_pixclk_rate
>> +		 */
>> +		if (output_mode == ROCKCHIP_OUT_MODE_YUV420) {
>> +			dclk_rate = dclk_rate >> 1;
>> +			K = 2;
>> +		}
>> +
>> +		if_pixclk_rate = (dclk_core_rate << 1) / K;
>> +		if_dclk_rate = dclk_core_rate / K;
>> +
>> +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
>> +		*if_dclk_div = dclk_rate / if_dclk_rate;
> Not sure if this will change with future extensions, but currently
> *if_pixclk_div will always be 2 and *if_dclk_div will alway be 4,
> so maybe better write it like this


Yes, the calculation of *if_pixclk_div is always 2 and *if_dclk_div is always 4,

I think calculation formula can give us a clear explanation why is 2 or 4.

considering the great power of rk3588, i think it can calculate it very easy.

>
>
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
> *dclk_core_div is calculated the same way for all cases. You could pull
> this out of the if/else.
Okay, will do.
>
>> +	} else if (vop2_output_if_is_edp(id)) {
>> +		/* edp_pixclk = edp_dclk > dclk_core */
>> +		if_pixclk_rate = v_pixclk / K;
>> +		if_dclk_rate = v_pixclk / K;
> if_dclk_rate is unused here.


It will be removed in next version.

>
>> +		dclk_rate = if_pixclk_rate * K;
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>> +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
>> +		*if_dclk_div = *if_pixclk_div;
> Both *if_pixclk_div and *if_dclk_div will always be 1.

Actually,  they will be the value of K here,  if it work at split mode(two

edp connect to one VP, one show the image for left half, one for right half,

a function like a dual channel mipi dsi).

I know it split mode is not supported by the current mainline, but i think keep

it as it is will give us convenient when we support split mode one day in the future.
>
>> +	} else if (vop2_output_if_is_dp(id)) {
>> +		if (output_mode == ROCKCHIP_OUT_MODE_YUV420)
>> +			dclk_out_rate = v_pixclk >> 3;
>> +		else
>> +			dclk_out_rate = v_pixclk >> 2;
>> +
>> +		dclk_rate = vop2_calc_dclk(dclk_out_rate, 600000);
>> +		if (!dclk_rate) {
>> +			drm_err(vop2->drm, "DP dclk_out_rate out of range, dclk_out_rate: %ld KHZ\n",
>> +				dclk_out_rate);
>> +			return -EINVAL;
> This function has return type unsigned long. Also this error is never
> checked for by the caller.
>
>> +		}
>> +		*dclk_out_div = dclk_rate / dclk_out_rate;
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>> +	} else if (vop2_output_if_is_mipi(id)) {
>> +		if_pixclk_rate = dclk_core_rate / K;
>> +		/* dclk_core = dclk_out * K = if_pixclk * K = v_pixclk / 4 */
>> +		dclk_out_rate = if_pixclk_rate;
>> +		/* dclk_rate = N * dclk_core_rate N = (1,2,4 ), we get a little factor here */
>> +		dclk_rate = vop2_calc_dclk(dclk_out_rate, 600000);
>> +		if (!dclk_rate) {
>> +			drm_err(vop2->drm, "MIPI dclk out of range, dclk_out_rate: %ld KHZ\n",
>> +				dclk_out_rate);
>> +			return -EINVAL;
>> +		}
>> +		*dclk_out_div = dclk_rate / dclk_out_rate;
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>> +		*if_pixclk_div = 1;       /*mipi pixclk == dclk_out*/
>> +	} else if (vop2_output_if_is_dpi(id)) {
>> +		dclk_rate = v_pixclk;
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>> +	}
>> +
>> +	*if_pixclk_div = ilog2(*if_pixclk_div);
>> +	*if_dclk_div = ilog2(*if_dclk_div);
>> +	*dclk_core_div = ilog2(*dclk_core_div);
>> +	*dclk_out_div = ilog2(*dclk_out_div);
>> +
>> +	drm_dbg(vop2->drm, "dclk:%ld, pixclk_div;%d,dclk_div:%d\n",
> Replace ';' with ':' in the format string, some whitespaces are missing.
>
>> +		dclk_rate, *if_pixclk_div, *if_dclk_div);
>> +
>> +	return dclk_rate;
>> +}
>> +
>> +/*
>> + * MIPI port mux on rk3588:
>> + * 0: Video Port2
>> + * 1: Video Port3
>> + * 3: Video Port 1(MIPI1 only)
>> + */
>> +static u32 rk3588_get_mipi_port_mux(int vp_id)
>> +{
>> +	if (vp_id == 1)
>> +		return 3;
>> +	else if (vp_id == 3)
>> +		return 1;
>> +	else
>> +		return 0;
>> +}
>> +
>> +static u32 rk3588_get_hdmi_pol(u32 flags)
>> +{
>> +	u32 val;
>> +
>> +	val = (flags & DRM_MODE_FLAG_NHSYNC) ? BIT(HSYNC_POSITIVE) : 0;
>> +	val |= (flags & DRM_MODE_FLAG_NVSYNC) ? BIT(VSYNC_POSITIVE) : 0;
>> +
>> +	return val;
>> +}
>> +
>> +static unsigned long rk3588_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
>> +{
>> +	struct vop2 *vop2 = vp->vop2;
>> +	int dclk_core_div, dclk_out_div, if_pixclk_div, if_dclk_div;
>> +	unsigned long clock;
>> +	u32 die, dip, div, vp_clk_div, val;
>> +
>> +	clock = vop2_calc_cru_cfg(vp, id, &dclk_core_div, &dclk_out_div,
>> +				  &if_pixclk_div, &if_dclk_div);
>> +
>> +	vp_clk_div = FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_CORE_DIV, dclk_core_div);
>> +	vp_clk_div |= FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_OUT_DIV, dclk_out_div);
>> +
>> +	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
>> +	dip = vop2_readl(vop2, RK3568_DSP_IF_POL);
>> +	div = vop2_readl(vop2, RK3568_DSP_IF_CTRL);
>> +
>> +	switch (id) {
>> +	case ROCKCHIP_VOP2_EP_HDMI0:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_HDMI0 |
>> +			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
>> +		val = rk3588_get_hdmi_pol(polflags);
>> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 1, 1));
>> +		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 6, 5));
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_HDMI1:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI1_DCLK_DIV, if_dclk_div);
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI1_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_HDMI1 |
>> +			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX, vp->id);
>> +		val = rk3588_get_hdmi_pol(polflags);
>> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 4, 4));
>> +		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 8, 7));
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_EDP0:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_EDP0 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
>> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 0, 0));
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_EDP1:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_EDP1 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX, vp->id);
>> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 3, 3));
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_MIPI0:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_MIPI0_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX;
>> +		val = rk3588_get_mipi_port_mux(vp->id);
>> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI0 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX, !!val);
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_MIPI1:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_MIPI1_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX;
>> +		val = rk3588_get_mipi_port_mux(vp->id);
>> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI1 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX, val);
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_DP0:
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_DP0_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_DP0 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_DP0_MUX, vp->id);
>> +		dip &= ~RK3588_DSP_IF_POL__DP0_PIN_POL;
>> +		dip |= FIELD_PREP(RK3588_DSP_IF_POL__DP0_PIN_POL, polflags);
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_DP1:
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI1 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX, vp->id);
>> +		dip &= ~RK3588_DSP_IF_POL__DP1_PIN_POL;
>> +		dip |= FIELD_PREP(RK3588_DSP_IF_POL__DP1_PIN_POL, polflags);
>> +		break;
>> +	default:
>> +		drm_err(vop2->drm, "Invalid interface id %d on vp%d\n", id, vp->id);
>> +		return 0;
>>   	}
>>   
>>   	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
>>   
>> +	vop2_vp_write(vp, RK3588_VP_CLK_CTRL, vp_clk_div);
>>   	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
>> +	vop2_writel(vop2, RK3568_DSP_IF_CTRL, div);
>>   	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
>> +
>> +	return clock;
>> +}
>> +
>> +static unsigned long vop2_set_intf_mux(struct vop2_video_port *vp, int ep_id, u32 polflags)
>> +{
>> +	struct vop2 *vop2 = vp->vop2;
>> +
>> +	if (vop2->data->soc_id == 3566 || vop2->data->soc_id == 3568)
>> +		return rk3568_set_intf_mux(vp, ep_id, polflags);
>> +	else if (vop2->data->soc_id == 3588)
>> +		return rk3588_set_intf_mux(vp, ep_id, polflags);
>> +	else
>> +		return 0;
>>   }
>>   
>>   static int us_to_vertical_line(struct drm_display_mode *mode, int us)
>> @@ -1622,7 +1907,7 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
>>   	drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
>>   		struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
>>   
>> -		rk3568_set_intf_mux(vp, rkencoder->crtc_endpoint_id, polflags);
>> +		clock = vop2_set_intf_mux(vp, rkencoder->crtc_endpoint_id, polflags);
> clock is set to potentially different values in this loop and the last
> value is taken. Without a further description or check this looks wrong.
>
>>   	}
>>   
>>   	if (vcstate->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
>> @@ -2011,6 +2296,14 @@ static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
>>   			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER1;
>>   			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER1, vp->id);
>>   			break;
>> +		case ROCKCHIP_VOP2_CLUSTER2:
>> +			port_sel &= ~RK3588_OVL_PORT_SEL__CLUSTER2;
>> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__CLUSTER2, vp->id);
>> +			break;
>> +		case ROCKCHIP_VOP2_CLUSTER3:
>> +			port_sel &= ~RK3588_OVL_PORT_SEL__CLUSTER3;
>> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__CLUSTER3, vp->id);
>> +			break;
>>   		case ROCKCHIP_VOP2_ESMART0:
>>   			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART0;
>>   			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART0, vp->id);
>> @@ -2019,6 +2312,14 @@ static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
>>   			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART1;
>>   			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART1, vp->id);
>>   			break;
>> +		case ROCKCHIP_VOP2_ESMART2:
>> +			port_sel &= ~RK3588_OVL_PORT_SEL__ESMART2;
>> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__ESMART2, vp->id);
>> +			break;
>> +		case ROCKCHIP_VOP2_ESMART3:
>> +			port_sel &= ~RK3588_OVL_PORT_SEL__ESMART3;
>> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__ESMART3, vp->id);
>> +			break;
>>   		case ROCKCHIP_VOP2_SMART0:
>>   			port_sel &= ~RK3568_OVL_PORT_SEL__SMART0;
>>   			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART0, vp->id);
>> @@ -2760,6 +3061,9 @@ static int vop2_bind(struct device *dev, struct device *master, void *data)
>>   	}
>>   
>>   	vop2->sys_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
> This already lacks an error check, shame on me...
>
>> +	vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
>> +	vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
>> +	vop2->sys_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pmu");
> ... but please don't duplicate that.
>
>>   
>>   	vop2->hclk = devm_clk_get(vop2->dev, "hclk");
>>   	if (IS_ERR(vop2->hclk)) {
>> @@ -2773,6 +3077,12 @@ static int vop2_bind(struct device *dev, struct device *master, void *data)
>>   		return PTR_ERR(vop2->aclk);
>>   	}
>>   
>> +	vop2->pclk = devm_clk_get_optional(vop2->dev, "pclk_vop");
>> +	if (IS_ERR(vop2->pclk)) {
>> +		drm_err(vop2->drm, "failed to get pclk source\n");
>> +		return PTR_ERR(vop2->pclk);
>> +	}
>> +
>>   	vop2->irq = platform_get_irq(pdev, 0);
>>   	if (vop2->irq < 0) {
>>   		drm_err(vop2->drm, "cannot find irq for vop2\n");
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> index 7175f46a2014..2fffe580b215 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> @@ -16,6 +16,7 @@
>>   #define WIN_FEATURE_AFBDC		BIT(0)
>>   #define WIN_FEATURE_CLUSTER		BIT(1)
>>   
>> +#define HIWORD_UPDATE(v, h, l)  ((GENMASK(h, l) << 16) | ((v) << (l)))
>>   /*
>>    *  the delay number of a window in different mode.
>>    */
>> @@ -38,6 +39,18 @@ enum vop2_scale_down_mode {
>>   	VOP2_SCALE_DOWN_AVG,
>>   };
>>   
>> +/*
>> + * vop2 internal power domain id,
>> + * should be all none zero, 0 will be treat as invalid;
>> + */
>> +#define VOP2_PD_CLUSTER0	BIT(0)
>> +#define VOP2_PD_CLUSTER1	BIT(1)
>> +#define VOP2_PD_CLUSTER2	BIT(2)
>> +#define VOP2_PD_CLUSTER3	BIT(3)
>> +#define VOP2_PD_DSC_8K		BIT(5)
>> +#define VOP2_PD_DSC_4K		BIT(6)
>> +#define VOP2_PD_ESMART		BIT(7)
>> +
>>   enum vop2_win_regs {
>>   	VOP2_WIN_ENABLE,
>>   	VOP2_WIN_FORMAT,
>> @@ -192,6 +205,11 @@ enum dst_factor_mode {
>>   };
>>   
>>   #define RK3568_GRF_VO_CON1			0x0364
>> +
>> +#define RK3588_GRF_SOC_CON1			0x0304
>> +#define RK3588_GRF_VOP_CON2			0x08
>> +#define RK3588_GRF_VO1_CON0			0x00
>> +
>>   /* System registers definition */
>>   #define RK3568_REG_CFG_DONE			0x000
>>   #define RK3568_VERSION_INFO			0x004
>> @@ -200,6 +218,7 @@ enum dst_factor_mode {
>>   #define RK3568_DSP_IF_EN			0x028
>>   #define RK3568_DSP_IF_CTRL			0x02c
>>   #define RK3568_DSP_IF_POL			0x030
>> +#define RK3588_SYS_PD_CTRL			0x034
>>   #define RK3568_WB_CTRL				0x40
>>   #define RK3568_WB_XSCAL_FACTOR			0x44
>>   #define RK3568_WB_YRGB_MST			0x48
>> @@ -223,6 +242,7 @@ enum dst_factor_mode {
>>   #define RK3568_VP_DSP_CTRL			0x00
>>   #define RK3568_VP_MIPI_CTRL			0x04
>>   #define RK3568_VP_COLOR_BAR_CTRL		0x08
>> +#define RK3588_VP_CLK_CTRL			0x0C
>>   #define RK3568_VP_3D_LUT_CTRL			0x10
>>   #define RK3568_VP_3D_LUT_MST			0x20
>>   #define RK3568_VP_DSP_BG			0x2C
>> @@ -364,6 +384,9 @@ enum dst_factor_mode {
>>   #define RK3568_VP_DSP_CTRL__CORE_DCLK_DIV		BIT(4)
>>   #define RK3568_VP_DSP_CTRL__OUT_MODE			GENMASK(3, 0)
>>   
>> +#define RK3588_VP_CLK_CTRL__DCLK_OUT_DIV		GENMASK(3, 2)
>> +#define RK3588_VP_CLK_CTRL__DCLK_CORE_DIV		GENMASK(1, 0)
>> +
>>   #define RK3568_VP_POST_SCL_CTRL__VSCALEDOWN		BIT(1)
>>   #define RK3568_VP_POST_SCL_CTRL__HSCALEDOWN		BIT(0)
>>   
>> @@ -382,11 +405,37 @@ enum dst_factor_mode {
>>   #define RK3568_SYS_DSP_INFACE_EN_HDMI			BIT(1)
>>   #define RK3568_SYS_DSP_INFACE_EN_RGB			BIT(0)
>>   
>> +#define RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX		GENMASK(22, 21)
>> +#define RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX		GENMASK(20, 20)
>> +#define RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX		GENMASK(19, 18)
>> +#define RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX		GENMASK(17, 16)
>> +#define RK3588_SYS_DSP_INFACE_EN_DP1_MUX		GENMASK(15, 14)
>> +#define RK3588_SYS_DSP_INFACE_EN_DP0_MUX		GENMASK(13, 12)
>> +#define RK3588_SYS_DSP_INFACE_EN_DPI			GENMASK(9, 8)
>> +#define RK3588_SYS_DSP_INFACE_EN_MIPI1			BIT(7)
>> +#define RK3588_SYS_DSP_INFACE_EN_MIPI0			BIT(6)
>> +#define RK3588_SYS_DSP_INFACE_EN_HDMI1			BIT(5)
>> +#define RK3588_SYS_DSP_INFACE_EN_EDP1			BIT(4)
>> +#define RK3588_SYS_DSP_INFACE_EN_HDMI0			BIT(3)
>> +#define RK3588_SYS_DSP_INFACE_EN_EDP0			BIT(2)
>> +#define RK3588_SYS_DSP_INFACE_EN_DP1			BIT(1)
>> +#define RK3588_SYS_DSP_INFACE_EN_DP0			BIT(0)
>> +
>> +#define RK3588_DSP_IF_MIPI1_PCLK_DIV			GENMASK(27, 26)
>> +#define RK3588_DSP_IF_MIPI0_PCLK_DIV			GENMASK(25, 24)
>> +#define RK3588_DSP_IF_EDP_HDMI1_PCLK_DIV		GENMASK(22, 22)
>> +#define RK3588_DSP_IF_EDP_HDMI1_DCLK_DIV		GENMASK(21, 20)
>> +#define RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV		GENMASK(18, 18)
>> +#define RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV		GENMASK(17, 16)
>> +
>>   #define RK3568_DSP_IF_POL__MIPI_PIN_POL			GENMASK(19, 16)
>>   #define RK3568_DSP_IF_POL__EDP_PIN_POL			GENMASK(15, 12)
>>   #define RK3568_DSP_IF_POL__HDMI_PIN_POL			GENMASK(7, 4)
>>   #define RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL		GENMASK(3, 0)
>>   
>> +#define RK3588_DSP_IF_POL__DP1_PIN_POL			GENMASK(14, 12)
>> +#define RK3588_DSP_IF_POL__DP0_PIN_POL			GENMASK(10, 8)
>> +
>>   #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2_PHASE_LOCK	BIT(5)
>>   #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2			BIT(4)
>>   
>> @@ -407,8 +456,12 @@ enum dst_factor_mode {
>>   #define RK3568_OVL_PORT_SEL__SEL_PORT			GENMASK(31, 16)
>>   #define RK3568_OVL_PORT_SEL__SMART1			GENMASK(31, 30)
>>   #define RK3568_OVL_PORT_SEL__SMART0			GENMASK(29, 28)
>> +#define RK3588_OVL_PORT_SEL__ESMART3			GENMASK(31, 30)
>> +#define RK3588_OVL_PORT_SEL__ESMART2			GENMASK(29, 28)
>>   #define RK3568_OVL_PORT_SEL__ESMART1			GENMASK(27, 26)
>>   #define RK3568_OVL_PORT_SEL__ESMART0			GENMASK(25, 24)
>> +#define RK3588_OVL_PORT_SEL__CLUSTER3			GENMASK(23, 22)
>> +#define RK3588_OVL_PORT_SEL__CLUSTER2			GENMASK(21, 20)
>>   #define RK3568_OVL_PORT_SEL__CLUSTER1			GENMASK(19, 18)
>>   #define RK3568_OVL_PORT_SEL__CLUSTER0			GENMASK(17, 16)
>>   #define RK3568_OVL_PORT_SET__PORT2_MUX			GENMASK(11, 8)
>> @@ -421,6 +474,10 @@ enum dst_factor_mode {
>>   #define RK3568_CLUSTER_DLY_NUM__CLUSTER0_1		GENMASK(15, 8)
>>   #define RK3568_CLUSTER_DLY_NUM__CLUSTER0_0		GENMASK(7, 0)
>>   
>> +#define RK3568_CLUSTER_WIN_CTRL0__WIN0_EN		BIT(0)
>> +
>> +#define RK3568_SMART_REGION0_CTRL__WIN0_EN		BIT(0)
>> +
>>   #define RK3568_SMART_DLY_NUM__SMART1			GENMASK(31, 24)
>>   #define RK3568_SMART_DLY_NUM__SMART0			GENMASK(23, 16)
>>   #define RK3568_SMART_DLY_NUM__ESMART1			GENMASK(15, 8)
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> index 22288ad7f326..4745a9260cf8 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> @@ -34,6 +34,28 @@ static const uint32_t formats_cluster[] = {
>>   	DRM_FORMAT_Y210, /* yuv422_10bit non-Linear mode only */
>>   };
>>   
>> +static const uint32_t formats_esmart[] = {
>> +	DRM_FORMAT_XRGB8888,
>> +	DRM_FORMAT_ARGB8888,
>> +	DRM_FORMAT_XBGR8888,
>> +	DRM_FORMAT_ABGR8888,
>> +	DRM_FORMAT_RGB888,
>> +	DRM_FORMAT_BGR888,
>> +	DRM_FORMAT_RGB565,
>> +	DRM_FORMAT_BGR565,
>> +	DRM_FORMAT_NV12, /* yuv420_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV21, /* yvu420_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV16, /* yuv422_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV61, /* yvu422_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV24, /* yuv444_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV42, /* yvu444_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV15, /* yuv420_10bit linear mode, 2 plane, no padding */
>> +	DRM_FORMAT_YVYU, /* yuv422_8bit[YVYU] linear mode */
>> +	DRM_FORMAT_VYUY, /* yuv422_8bit[VYUY] linear mode */
>> +	DRM_FORMAT_YUYV, /* yuv422_8bit[YUYV] linear mode */
>> +	DRM_FORMAT_UYVY, /* yuv422_8bit[UYVY] linear mode */
>> +};
>> +
>>   static const uint32_t formats_rk356x_esmart[] = {
>>   	DRM_FORMAT_XRGB8888,
>>   	DRM_FORMAT_ARGB8888,
>> @@ -234,6 +256,186 @@ static const struct vop2_win_data rk3568_vop_win_data[] = {
>>   	},
>>   };
>>   
>> +static const struct vop2_video_port_data rk3588_vop_video_ports[] = {
>> +	{
>> +		.id = 0,
>> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
>> +		.gamma_lut_len = 1024,
>> +		.cubic_lut_len = 9 * 9 * 9, /* 9x9x9 */
>> +		.max_output = { 4096, 2304 },
>> +		/* hdr2sdr sdr2hdr hdr2hdr sdr2sdr */
>> +		.pre_scan_max_dly = { 76, 65, 65, 54 },
>> +		.offset = 0xc00,
>> +	}, {
>> +		.id = 1,
>> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
>> +		.gamma_lut_len = 1024,
>> +		.cubic_lut_len = 729, /* 9x9x9 */
>> +		.max_output = { 4096, 2304 },
>> +		.pre_scan_max_dly = { 76, 65, 65, 54 },
>> +		.offset = 0xd00,
>> +	}, {
>> +		.id = 2,
>> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
>> +		.gamma_lut_len = 1024,
>> +		.cubic_lut_len = 17 * 17 * 17, /* 17x17x17 */
>> +		.max_output = { 4096, 2304 },
>> +		.pre_scan_max_dly = { 52, 52, 52, 52 },
>> +		.offset = 0xe00,
>> +	}, {
>> +		.id = 3,
>> +		.gamma_lut_len = 1024,
>> +		.max_output = { 2048, 1536 },
>> +		.pre_scan_max_dly = { 52, 52, 52, 52 },
>> +		.offset = 0xf00,
>> +	},
>> +};
>> +
>> +/*
>> + * rk3588 vop with 4 cluster, 4 esmart win.
>> + * Every cluster can work as 4K win or split into two win.
>> + * All win in cluster support AFBCD.
>> + *
>> + * Every esmart win and smart win support 4 Multi-region.
>> + *
>> + * Scale filter mode:
>> + *
>> + * * Cluster:  bicubic for horizontal scale up, others use bilinear
>> + * * ESmart:
>> + *    * nearest-neighbor/bilinear/bicubic for scale up
>> + *    * nearest-neighbor/bilinear/average for scale down
>> + *
>> + * AXI Read ID assignment:
>> + * Two AXI bus:
>> + * AXI0 is a read/write bus with a higher performance.
>> + * AXI1 is a read only bus.
>> + *
>> + * Every window on a AXI bus must assigned two unique
>> + * read id(yrgb_id/uv_id, valid id are 0x1~0xe).
>> + *
>> + * AXI0:
>> + * Cluster0/1, Esmart0/1, WriteBack
>> + *
>> + * AXI 1:
>> + * Cluster2/3, Esmart2/3
>> + *
>> + */
>> +static const struct vop2_win_data rk3588_vop_win_data[] = {
>> +	{
>> +		.name = "Cluster0-win0",
>> +		.phys_id = ROCKCHIP_VOP2_CLUSTER0,
>> +		.base = 0x1000,
>> +		.formats = formats_cluster,
>> +		.nformats = ARRAY_SIZE(formats_cluster),
>> +		.format_modifiers = format_modifiers_afbc,
>> +		.layer_sel_id = 0,
>> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> +		.max_upscale_factor = 4,
>> +		.max_downscale_factor = 4,
>> +		.dly = { 4, 26, 29 },
>> +		.type = DRM_PLANE_TYPE_PRIMARY,
>> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
>> +	}, {
>> +		.name = "Cluster1-win0",
>> +		.phys_id = ROCKCHIP_VOP2_CLUSTER1,
>> +		.base = 0x1200,
>> +		.formats = formats_cluster,
>> +		.nformats = ARRAY_SIZE(formats_cluster),
>> +		.format_modifiers = format_modifiers_afbc,
>> +		.layer_sel_id = 1,
>> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_PRIMARY,
>> +		.max_upscale_factor = 4,
>> +		.max_downscale_factor = 4,
>> +		.dly = { 4, 26, 29 },
>> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
>> +	}, {
>> +		.name = "Cluster2-win0",
>> +		.phys_id = ROCKCHIP_VOP2_CLUSTER2,
>> +		.base = 0x1400,
>> +		.formats = formats_cluster,
>> +		.nformats = ARRAY_SIZE(formats_cluster),
>> +		.format_modifiers = format_modifiers_afbc,
>> +		.layer_sel_id = 4,
>> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_PRIMARY,
>> +		.max_upscale_factor = 4,
>> +		.max_downscale_factor = 4,
>> +		.dly = { 4, 26, 29 },
>> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
>> +	}, {
>> +		.name = "Cluster3-win0",
>> +		.phys_id = ROCKCHIP_VOP2_CLUSTER3,
>> +		.base = 0x1600,
>> +		.formats = formats_cluster,
>> +		.nformats = ARRAY_SIZE(formats_cluster),
>> +		.format_modifiers = format_modifiers_afbc,
>> +		.layer_sel_id = 5,
>> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_PRIMARY,
>> +		.max_upscale_factor = 4,
>> +		.max_downscale_factor = 4,
>> +		.dly = { 4, 26, 29 },
>> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
>> +	}, {
>> +		.name = "Esmart0-win0",
>> +		.phys_id = ROCKCHIP_VOP2_ESMART0,
>> +		.formats = formats_esmart,
>> +		.nformats = ARRAY_SIZE(formats_esmart),
>> +		.format_modifiers = format_modifiers,
>> +		.base = 0x1800,
>> +		.layer_sel_id = 2,
>> +		.supported_rotations = DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_OVERLAY,
>> +		.max_upscale_factor = 8,
>> +		.max_downscale_factor = 8,
>> +		.dly = { 23, 45, 48 },
>> +	}, {
>> +		.name = "Esmart1-win0",
>> +		.phys_id = ROCKCHIP_VOP2_ESMART1,
>> +		.formats = formats_esmart,
>> +		.nformats = ARRAY_SIZE(formats_esmart),
>> +		.format_modifiers = format_modifiers,
>> +		.base = 0x1a00,
>> +		.layer_sel_id = 3,
>> +		.supported_rotations = DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_OVERLAY,
>> +		.max_upscale_factor = 8,
>> +		.max_downscale_factor = 8,
>> +		.dly = { 23, 45, 48 },
>> +	}, {
>> +		.name = "Esmart2-win0",
>> +		.phys_id = ROCKCHIP_VOP2_ESMART2,
>> +		.base = 0x1c00,
>> +		.formats = formats_esmart,
>> +		.nformats = ARRAY_SIZE(formats_esmart),
>> +		.format_modifiers = format_modifiers,
>> +		.layer_sel_id = 6,
>> +		.supported_rotations = DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_OVERLAY,
>> +		.max_upscale_factor = 8,
>> +		.max_downscale_factor = 8,
>> +		.dly = { 23, 45, 48 },
>> +	}, {
>> +		.name = "Esmart3-win0",
>> +		.phys_id = ROCKCHIP_VOP2_ESMART3,
>> +		.formats = formats_esmart,
>> +		.nformats = ARRAY_SIZE(formats_esmart),
>> +		.format_modifiers = format_modifiers,
>> +		.base = 0x1e00,
>> +		.layer_sel_id = 7,
>> +		.supported_rotations = DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_OVERLAY,
>> +		.max_upscale_factor = 8,
>> +		.max_downscale_factor = 8,
>> +		.dly = { 23, 45, 48 },
>> +	},
>> +};
>> +
>>   static const struct vop2_data rk3566_vop = {
>>   	.nr_vps = 3,
>>   	.max_input = { 4096, 2304 },
>> @@ -254,6 +456,16 @@ static const struct vop2_data rk3568_vop = {
>>   	.soc_id = 3568,
>>   };
>>   
>> +static const struct vop2_data rk3588_vop = {
>> +	.nr_vps = 4,
>> +	.max_input = { 4096, 4320 },
>> +	.max_output = { 4096, 4320 },
>> +	.vp = rk3588_vop_video_ports,
>> +	.win = rk3588_vop_win_data,
>> +	.win_size = ARRAY_SIZE(rk3588_vop_win_data),
>> +	.soc_id = 3588,
>> +};
>> +
>>   static const struct of_device_id vop2_dt_match[] = {
>>   	{
>>   		.compatible = "rockchip,rk3566-vop",
>> @@ -261,6 +473,9 @@ static const struct of_device_id vop2_dt_match[] = {
>>   	}, {
>>   		.compatible = "rockchip,rk3568-vop",
>>   		.data = &rk3568_vop,
>> +	}, {
>> +		.compatible = "rockchip,rk3588-vop",
>> +		.data = &rk3588_vop
>>   	}, {
>>   	},
>>   };
>> diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
>> index 6e66a802b96a..668f199df9f0 100644
>> --- a/include/dt-bindings/soc/rockchip,vop2.h
>> +++ b/include/dt-bindings/soc/rockchip,vop2.h
>> @@ -10,5 +10,9 @@
>>   #define ROCKCHIP_VOP2_EP_LVDS0	5
>>   #define ROCKCHIP_VOP2_EP_MIPI1	6
>>   #define ROCKCHIP_VOP2_EP_LVDS1	7
>> +#define ROCKCHIP_VOP2_EP_HDMI1	8
>> +#define ROCKCHIP_VOP2_EP_EDP1	9
>> +#define ROCKCHIP_VOP2_EP_DP0	10
>> +#define ROCKCHIP_VOP2_EP_DP1	11
>>   
>>   #endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
>> -- 
>> 2.34.1
>>
>>
Sascha Hauer Nov. 16, 2023, 7:50 a.m. UTC | #6
On Thu, Nov 16, 2023 at 03:24:54PM +0800, Andy Yan wrote:
> > 	case ROCKCHIP_VOP2_EP_HDMI0:
> > 	case ROCKCHIP_VOP2_EP_HDMI1:
> > 		...
> > }
> > 
> > would look a bit better overall.
> > 
> > > +		/*
> > > +		 * K = 2: dclk_core = if_pixclk_rate > if_dclk_rate
> > > +		 * K = 1: dclk_core = hdmie_edp_dclk > if_pixclk_rate
> > > +		 */
> > > +		if (output_mode == ROCKCHIP_OUT_MODE_YUV420) {
> > > +			dclk_rate = dclk_rate >> 1;
> > > +			K = 2;
> > > +		}
> > > +
> > > +		if_pixclk_rate = (dclk_core_rate << 1) / K;
> > > +		if_dclk_rate = dclk_core_rate / K;
> > > +
> > > +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
> > > +		*if_dclk_div = dclk_rate / if_dclk_rate;
> > Not sure if this will change with future extensions, but currently
> > *if_pixclk_div will always be 2 and *if_dclk_div will alway be 4,
> > so maybe better write it like this
> 
> 
> Yes, the calculation of *if_pixclk_div is always 2 and *if_dclk_div is always 4,
> 
> I think calculation formula can give us a clear explanation why is 2 or 4.
> 
> considering the great power of rk3588, i think it can calculate it very easy.

Sure it can. My concern is not the CPU time it takes to do that
equation, but more the readability of the code. For me as a reader it
might be more easily acceptable that both dividers have fixed values
than it is to understand the equation.

Your mileage may vary, I won't insist on this.

> 
> > 
> > 
> > > +		*dclk_core_div = dclk_rate / dclk_core_rate;
> > *dclk_core_div is calculated the same way for all cases. You could pull
> > this out of the if/else.
> Okay, will do.
> > 
> > > +	} else if (vop2_output_if_is_edp(id)) {
> > > +		/* edp_pixclk = edp_dclk > dclk_core */
> > > +		if_pixclk_rate = v_pixclk / K;
> > > +		if_dclk_rate = v_pixclk / K;
> > if_dclk_rate is unused here.
> 
> 
> It will be removed in next version.
> 
> > 
> > > +		dclk_rate = if_pixclk_rate * K;
> > > +		*dclk_core_div = dclk_rate / dclk_core_rate;
> > > +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
> > > +		*if_dclk_div = *if_pixclk_div;
> > Both *if_pixclk_div and *if_dclk_div will always be 1.
> 
> Actually,  they will be the value of K here,  if it work at split mode(two
> 
> edp connect to one VP, one show the image for left half, one for right half,
> 
> a function like a dual channel mipi dsi).
> 
> I know it split mode is not supported by the current mainline, but i think keep

Ok.

Sascha
Andy Yan Nov. 16, 2023, 8 a.m. UTC | #7
Hi Sascha:

On 11/16/23 15:50, Sascha Hauer wrote:
> On Thu, Nov 16, 2023 at 03:24:54PM +0800, Andy Yan wrote:
>>> 	case ROCKCHIP_VOP2_EP_HDMI0:
>>> 	case ROCKCHIP_VOP2_EP_HDMI1:
>>> 		...
>>> }
>>>
>>> would look a bit better overall.
>>>
>>>> +		/*
>>>> +		 * K = 2: dclk_core = if_pixclk_rate > if_dclk_rate
>>>> +		 * K = 1: dclk_core = hdmie_edp_dclk > if_pixclk_rate
>>>> +		 */
>>>> +		if (output_mode == ROCKCHIP_OUT_MODE_YUV420) {
>>>> +			dclk_rate = dclk_rate >> 1;
>>>> +			K = 2;
>>>> +		}
>>>> +
>>>> +		if_pixclk_rate = (dclk_core_rate << 1) / K;
>>>> +		if_dclk_rate = dclk_core_rate / K;
>>>> +
>>>> +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
>>>> +		*if_dclk_div = dclk_rate / if_dclk_rate;
>>> Not sure if this will change with future extensions, but currently
>>> *if_pixclk_div will always be 2 and *if_dclk_div will alway be 4,
>>> so maybe better write it like this
>>
>> Yes, the calculation of *if_pixclk_div is always 2 and *if_dclk_div is always 4,
>>
>> I think calculation formula can give us a clear explanation why is 2 or 4.
>>
>> considering the great power of rk3588, i think it can calculate it very easy.
> Sure it can. My concern is not the CPU time it takes to do that
> equation, but more the readability of the code. For me as a reader it
> might be more easily acceptable that both dividers have fixed values
> than it is to understand the equation.
>
> Your mileage may vary, I won't insist on this.


Or I make it as fixed values, and leave the calculation formula as comments ?

>
>>>
>>>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>>> *dclk_core_div is calculated the same way for all cases. You could pull
>>> this out of the if/else.
>> Okay, will do.
>>>> +	} else if (vop2_output_if_is_edp(id)) {
>>>> +		/* edp_pixclk = edp_dclk > dclk_core */
>>>> +		if_pixclk_rate = v_pixclk / K;
>>>> +		if_dclk_rate = v_pixclk / K;
>>> if_dclk_rate is unused here.
>>
>> It will be removed in next version.
>>
>>>> +		dclk_rate = if_pixclk_rate * K;
>>>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>>>> +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
>>>> +		*if_dclk_div = *if_pixclk_div;
>>> Both *if_pixclk_div and *if_dclk_div will always be 1.
>> Actually,  they will be the value of K here,  if it work at split mode(two
>>
>> edp connect to one VP, one show the image for left half, one for right half,
>>
>> a function like a dual channel mipi dsi).
>>
>> I know it split mode is not supported by the current mainline, but i think keep
> Ok.
>
> Sascha
>
>
Andy Yan Nov. 16, 2023, 10:39 a.m. UTC | #8
Hi Sascha:

Please check my response for the rest comments inline.

On 11/15/23 17:08, Sascha Hauer wrote:
> Hi Andy,
>
> Thanks for your patches, some remarks inline.
>
> On Tue, Nov 14, 2023 at 07:28:55PM +0800, Andy Yan wrote:
>> From: Andy Yan <andy.yan@rock-chips.com>
>>
>> VOP2 on rk3588:
>>
>> Four video ports:
>> VP0 Max 4096x2160
>> VP1 Max 4096x2160
>> VP2 Max 4096x2160
>> VP3 Max 2048x1080
>>
>> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
>> 4 4K Esmart windows with line RGB/YUV support
>>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>> ---
>>
>>   drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 324 ++++++++++++++++++-
>>   drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  57 ++++
>>   drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 215 ++++++++++++
>>   include/dt-bindings/soc/rockchip,vop2.h      |   4 +
>>   4 files changed, 593 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> index 0d7dc543bef3..ba61c0233937 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> @@ -191,6 +191,9 @@ struct vop2 {
>>   	struct regmap *map;
>>   
>>   	struct regmap *sys_grf;
>> +	struct regmap *vop_grf;
>> +	struct regmap *vo1_grf;
>> +	struct regmap *sys_pmu;
>>   
>>   	/* physical map length of vop2 register */
>>   	u32 len;
>> @@ -209,6 +212,7 @@ struct vop2 {
>>   	unsigned int enable_count;
>>   	struct clk *hclk;
>>   	struct clk *aclk;
>> +	struct clk *pclk;
>>   
>>   	/* optional internal rgb encoder */
>>   	struct rockchip_rgb *rgb;
>> @@ -217,6 +221,13 @@ struct vop2 {
>>   	struct vop2_win win[];
>>   };
>>   
>> +#define vop2_output_if_is_hdmi(x)	(x == ROCKCHIP_VOP2_EP_HDMI0 || x == ROCKCHIP_VOP2_EP_HDMI1)
>> +#define vop2_output_if_is_dp(x)		(x == ROCKCHIP_VOP2_EP_DP0 || x == ROCKCHIP_VOP2_EP_DP1)
>> +#define vop2_output_if_is_edp(x)	(x == ROCKCHIP_VOP2_EP_EDP0 || x == ROCKCHIP_VOP2_EP_EDP1)
>> +#define vop2_output_if_is_mipi(x)	(x == ROCKCHIP_VOP2_EP_MIPI0 || x == ROCKCHIP_VOP2_EP_MIPI1)
>> +#define vop2_output_if_is_lvds(x)	(x == ROCKCHIP_VOP2_EP_LVDS0 || x == ROCKCHIP_VOP2_EP_LVDS1)
>> +#define vop2_output_if_is_dpi(x)	(x == ROCKCHIP_VOP2_EP_RGB0)
>> +
>>   static const struct regmap_config vop2_regmap_config;
>>   
>>   static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc)
>> @@ -271,9 +282,12 @@ static bool vop2_cluster_window(const struct vop2_win *win)
>>   static void vop2_cfg_done(struct vop2_video_port *vp)
>>   {
>>   	struct vop2 *vop2 = vp->vop2;
>> +	u32 val;
>>   
>> -	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE,
>> -			BIT(vp->id) | RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
>> +	val = BIT(vp->id) | (BIT(vp->id) << 16) |
>> +		RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN;
>> +
>> +	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE, val);
>>   }
>>   
>>   static void vop2_win_disable(struct vop2_win *win)
>> @@ -863,13 +877,32 @@ static int vop2_core_clks_prepare_enable(struct vop2 *vop2)
>>   		goto err;
>>   	}
>>   
>> +	ret = clk_prepare_enable(vop2->pclk);
>> +	if (ret < 0) {
>> +		drm_err(vop2->drm, "failed to enable pclk - %d\n", ret);
>> +		goto err1;
>> +	}
>> +
>>   	return 0;
>> +err1:
>> +	clk_disable_unprepare(vop2->aclk);
>>   err:
>>   	clk_disable_unprepare(vop2->hclk);
>>   
>>   	return ret;
>>   }
>>   
>> +static void vop2_power_domain_all_on(struct vop2 *vop2)
> The function name sounds like it would return the current status rather
> than enabling them. Better vop2_power_domain_enable_all(). Also a
> rk3588_ prefix would be nice.


Okay, will do.

>> +{
>> +	u32 pd;
>> +
>> +	pd = vop2_readl(vop2, RK3588_SYS_PD_CTRL);
>> +	pd &= ~(VOP2_PD_CLUSTER0 | VOP2_PD_CLUSTER1 | VOP2_PD_CLUSTER2 |
>> +		VOP2_PD_CLUSTER3 | VOP2_PD_ESMART);
>> +
>> +	vop2_writel(vop2, RK3588_SYS_PD_CTRL, pd);
>> +}
>> +
>>   static void vop2_enable(struct vop2 *vop2)
>>   {
>>   	int ret;
>> @@ -901,6 +934,9 @@ static void vop2_enable(struct vop2 *vop2)
>>   	if (vop2->data->soc_id == 3566)
>>   		vop2_writel(vop2, RK3568_OTP_WIN_EN, 1);
>>   
>> +	if (vop2->data->soc_id == 3588)
>> +		vop2_power_domain_all_on(vop2);
>> +
>>   	vop2_writel(vop2, RK3568_REG_CFG_DONE, RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
>>   
>>   	/*
>> @@ -926,6 +962,7 @@ static void vop2_disable(struct vop2 *vop2)
>>   
>>   	pm_runtime_put_sync(vop2->dev);
>>   
>> +	clk_disable_unprepare(vop2->pclk);
>>   	clk_disable_unprepare(vop2->aclk);
>>   	clk_disable_unprepare(vop2->hclk);
>>   }
>> @@ -1293,7 +1330,11 @@ static void vop2_plane_atomic_update(struct drm_plane *plane,
>>   			vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
>>   		vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
>>   		vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
>> -		vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
>> +		if (vop2->data->soc_id == 3566 || vop2->data->soc_id == 3568)
>> +			vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
>> +		else
>> +			vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 1);
>> +
>>   		vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
>>   		transform_offset = vop2_afbc_transform_offset(pstate, half_block_en);
>>   		vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
>> @@ -1481,10 +1522,10 @@ static void vop2_post_config(struct drm_crtc *crtc)
>>   	vop2_vp_write(vp, RK3568_VP_DSP_BG, 0);
>>   }
>>   
>> -static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
>> -				u32 polflags)
>> +static unsigned long rk3568_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
>>   {
>>   	struct vop2 *vop2 = vp->vop2;
>> +	struct drm_crtc *crtc = &vp->crtc;
>>   	u32 die, dip;
>>   
>>   	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
>> @@ -1546,13 +1587,257 @@ static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
>>   		break;
>>   	default:
>>   		drm_err(vop2->drm, "Invalid interface id %d on vp%d\n", id, vp->id);
>> -		return;
>> +		return 0;
>> +	}
>> +
>> +	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
>> +
>> +	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
>> +	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
>> +
>> +	return crtc->state->adjusted_mode.crtc_clock  * 1000LL;
>> +}
>> +
>> +/*
>> + * calc the dclk on rk3588
>> + * the available div of dclk is 1, 2, 4
>> + */
>> +static unsigned long vop2_calc_dclk(unsigned long child_clk, unsigned long max_dclk)
>> +{
>> +	if (child_clk * 4 <= max_dclk)
>> +		return child_clk * 4;
>> +	else if (child_clk * 2 <= max_dclk)
>> +		return child_clk * 2;
>> +	else if (child_clk <= max_dclk)
>> +		return child_clk;
>> +	else
>> +		return 0;
>> +}
>> +
>> +/*
>> + * 4 pixclk/cycle on rk3588
>> + * RGB/eDP/HDMI: if_pixclk >= dclk_core
>> + * DP: dp_pixclk = dclk_out <= dclk_core
>> + * DSI: mipi_pixclk <= dclk_out <= dclk_core
>> + */
>> +static unsigned long vop2_calc_cru_cfg(struct vop2_video_port *vp, int id,
>> +				       int *dclk_core_div, int *dclk_out_div,
>> +				       int *if_pixclk_div, int *if_dclk_div)
> Please add a rk3588_ prefix to all functions that are rk3588 only.


Will do.

>
>> +{
>> +	struct vop2 *vop2 = vp->vop2;
>> +	struct drm_crtc *crtc = &vp->crtc;
>> +	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
>> +	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
>> +	int output_mode = vcstate->output_mode;
>> +	unsigned long v_pixclk = adjusted_mode->crtc_clock * 1000LL; /* video timing pixclk */
>> +	unsigned long dclk_core_rate = v_pixclk >> 2;
>> +	unsigned long dclk_rate = v_pixclk;
>> +	unsigned long dclk_out_rate;
>> +	unsigned long if_dclk_rate;
>> +	unsigned long if_pixclk_rate;
>> +	int K = 1;
>> +
>> +	if (vop2_output_if_is_hdmi(id)) {
> The vop2_output_if_is_* defines are used only once. Maybe a big:
>
> switch (id) {
> 	case ROCKCHIP_VOP2_EP_HDMI0:
> 	case ROCKCHIP_VOP2_EP_HDMI1:
> 		...
> }
>
> would look a bit better overall.


actually the output_if check will be used in more place, such as a RB_SWAP for DP and hdmi

at YUV444 output mode(I lost in this version, I will add it in next).

So I would like keep it.

>
>> +		/*
>> +		 * K = 2: dclk_core = if_pixclk_rate > if_dclk_rate
>> +		 * K = 1: dclk_core = hdmie_edp_dclk > if_pixclk_rate
>> +		 */
>> +		if (output_mode == ROCKCHIP_OUT_MODE_YUV420) {
>> +			dclk_rate = dclk_rate >> 1;
>> +			K = 2;
>> +		}
>> +
>> +		if_pixclk_rate = (dclk_core_rate << 1) / K;
>> +		if_dclk_rate = dclk_core_rate / K;
>> +
>> +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
>> +		*if_dclk_div = dclk_rate / if_dclk_rate;
> Not sure if this will change with future extensions, but currently
> *if_pixclk_div will always be 2 and *if_dclk_div will alway be 4,
> so maybe better write it like this
>
>
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
> *dclk_core_div is calculated the same way for all cases. You could pull
> this out of the if/else.
>
>> +	} else if (vop2_output_if_is_edp(id)) {
>> +		/* edp_pixclk = edp_dclk > dclk_core */
>> +		if_pixclk_rate = v_pixclk / K;
>> +		if_dclk_rate = v_pixclk / K;
> if_dclk_rate is unused here.
It will be removed in next version.
>
>> +		dclk_rate = if_pixclk_rate * K;
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>> +		*if_pixclk_div = dclk_rate / if_pixclk_rate;
>> +		*if_dclk_div = *if_pixclk_div;
> Both *if_pixclk_div and *if_dclk_div will always be 1.
>
>> +	} else if (vop2_output_if_is_dp(id)) {
>> +		if (output_mode == ROCKCHIP_OUT_MODE_YUV420)
>> +			dclk_out_rate = v_pixclk >> 3;
>> +		else
>> +			dclk_out_rate = v_pixclk >> 2;
>> +
>> +		dclk_rate = vop2_calc_dclk(dclk_out_rate, 600000);
>> +		if (!dclk_rate) {
>> +			drm_err(vop2->drm, "DP dclk_out_rate out of range, dclk_out_rate: %ld KHZ\n",
>> +				dclk_out_rate);
>> +			return -EINVAL;
> This function has return type unsigned long. Also this error is never
> checked for by the caller.


I think I should return 0 here, and add check for the caller.

>> +		}
>> +		*dclk_out_div = dclk_rate / dclk_out_rate;
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>> +	} else if (vop2_output_if_is_mipi(id)) {
>> +		if_pixclk_rate = dclk_core_rate / K;
>> +		/* dclk_core = dclk_out * K = if_pixclk * K = v_pixclk / 4 */
>> +		dclk_out_rate = if_pixclk_rate;
>> +		/* dclk_rate = N * dclk_core_rate N = (1,2,4 ), we get a little factor here */
>> +		dclk_rate = vop2_calc_dclk(dclk_out_rate, 600000);
>> +		if (!dclk_rate) {
>> +			drm_err(vop2->drm, "MIPI dclk out of range, dclk_out_rate: %ld KHZ\n",
>> +				dclk_out_rate);
>> +			return -EINVAL;
>> +		}
>> +		*dclk_out_div = dclk_rate / dclk_out_rate;
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>> +		*if_pixclk_div = 1;       /*mipi pixclk == dclk_out*/
>> +	} else if (vop2_output_if_is_dpi(id)) {
>> +		dclk_rate = v_pixclk;
>> +		*dclk_core_div = dclk_rate / dclk_core_rate;
>> +	}
>> +
>> +	*if_pixclk_div = ilog2(*if_pixclk_div);
>> +	*if_dclk_div = ilog2(*if_dclk_div);
>> +	*dclk_core_div = ilog2(*dclk_core_div);
>> +	*dclk_out_div = ilog2(*dclk_out_div);
>> +
>> +	drm_dbg(vop2->drm, "dclk:%ld, pixclk_div;%d,dclk_div:%d\n",
> Replace ';' with ':' in the format string, some whitespaces are missing.


Thank you for catching it, will fix in next version.

>> +		dclk_rate, *if_pixclk_div, *if_dclk_div);
>> +
>> +	return dclk_rate;
>> +}
>> +
>> +/*
>> + * MIPI port mux on rk3588:
>> + * 0: Video Port2
>> + * 1: Video Port3
>> + * 3: Video Port 1(MIPI1 only)
>> + */
>> +static u32 rk3588_get_mipi_port_mux(int vp_id)
>> +{
>> +	if (vp_id == 1)
>> +		return 3;
>> +	else if (vp_id == 3)
>> +		return 1;
>> +	else
>> +		return 0;
>> +}
>> +
>> +static u32 rk3588_get_hdmi_pol(u32 flags)
>> +{
>> +	u32 val;
>> +
>> +	val = (flags & DRM_MODE_FLAG_NHSYNC) ? BIT(HSYNC_POSITIVE) : 0;
>> +	val |= (flags & DRM_MODE_FLAG_NVSYNC) ? BIT(VSYNC_POSITIVE) : 0;
>> +
>> +	return val;
>> +}
>> +
>> +static unsigned long rk3588_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
>> +{
>> +	struct vop2 *vop2 = vp->vop2;
>> +	int dclk_core_div, dclk_out_div, if_pixclk_div, if_dclk_div;
>> +	unsigned long clock;
>> +	u32 die, dip, div, vp_clk_div, val;
>> +
>> +	clock = vop2_calc_cru_cfg(vp, id, &dclk_core_div, &dclk_out_div,
>> +				  &if_pixclk_div, &if_dclk_div);
>> +
>> +	vp_clk_div = FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_CORE_DIV, dclk_core_div);
>> +	vp_clk_div |= FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_OUT_DIV, dclk_out_div);
>> +
>> +	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
>> +	dip = vop2_readl(vop2, RK3568_DSP_IF_POL);
>> +	div = vop2_readl(vop2, RK3568_DSP_IF_CTRL);
>> +
>> +	switch (id) {
>> +	case ROCKCHIP_VOP2_EP_HDMI0:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_HDMI0 |
>> +			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
>> +		val = rk3588_get_hdmi_pol(polflags);
>> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 1, 1));
>> +		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 6, 5));
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_HDMI1:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI1_DCLK_DIV, if_dclk_div);
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI1_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_HDMI1 |
>> +			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX, vp->id);
>> +		val = rk3588_get_hdmi_pol(polflags);
>> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 4, 4));
>> +		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 8, 7));
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_EDP0:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_EDP0 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
>> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 0, 0));
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_EDP1:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
>> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_EDP1 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX, vp->id);
>> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 3, 3));
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_MIPI0:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_MIPI0_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX;
>> +		val = rk3588_get_mipi_port_mux(vp->id);
>> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI0 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX, !!val);
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_MIPI1:
>> +		div |= FIELD_PREP(RK3588_DSP_IF_MIPI1_PCLK_DIV, if_pixclk_div);
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX;
>> +		val = rk3588_get_mipi_port_mux(vp->id);
>> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI1 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX, val);
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_DP0:
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_DP0_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_DP0 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_DP0_MUX, vp->id);
>> +		dip &= ~RK3588_DSP_IF_POL__DP0_PIN_POL;
>> +		dip |= FIELD_PREP(RK3588_DSP_IF_POL__DP0_PIN_POL, polflags);
>> +		break;
>> +	case ROCKCHIP_VOP2_EP_DP1:
>> +		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX;
>> +		die |= RK3588_SYS_DSP_INFACE_EN_MIPI1 |
>> +			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX, vp->id);
>> +		dip &= ~RK3588_DSP_IF_POL__DP1_PIN_POL;
>> +		dip |= FIELD_PREP(RK3588_DSP_IF_POL__DP1_PIN_POL, polflags);
>> +		break;
>> +	default:
>> +		drm_err(vop2->drm, "Invalid interface id %d on vp%d\n", id, vp->id);
>> +		return 0;
>>   	}
>>   
>>   	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
>>   
>> +	vop2_vp_write(vp, RK3588_VP_CLK_CTRL, vp_clk_div);
>>   	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
>> +	vop2_writel(vop2, RK3568_DSP_IF_CTRL, div);
>>   	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
>> +
>> +	return clock;
>> +}
>> +
>> +static unsigned long vop2_set_intf_mux(struct vop2_video_port *vp, int ep_id, u32 polflags)
>> +{
>> +	struct vop2 *vop2 = vp->vop2;
>> +
>> +	if (vop2->data->soc_id == 3566 || vop2->data->soc_id == 3568)
>> +		return rk3568_set_intf_mux(vp, ep_id, polflags);
>> +	else if (vop2->data->soc_id == 3588)
>> +		return rk3588_set_intf_mux(vp, ep_id, polflags);
>> +	else
>> +		return 0;
>>   }
>>   
>>   static int us_to_vertical_line(struct drm_display_mode *mode, int us)
>> @@ -1622,7 +1907,7 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
>>   	drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
>>   		struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
>>   
>> -		rk3568_set_intf_mux(vp, rkencoder->crtc_endpoint_id, polflags);
>> +		clock = vop2_set_intf_mux(vp, rkencoder->crtc_endpoint_id, polflags);
> clock is set to potentially different values in this loop and the last
> value is taken. Without a further description or check this looks wrong.

If we attach more encoder/connector on one vp, the clock will calculate more than once

but with a same result.

I will add comment in next version.

>
>>   	}
>>   
>>   	if (vcstate->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
>> @@ -2011,6 +2296,14 @@ static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
>>   			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER1;
>>   			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER1, vp->id);
>>   			break;
>> +		case ROCKCHIP_VOP2_CLUSTER2:
>> +			port_sel &= ~RK3588_OVL_PORT_SEL__CLUSTER2;
>> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__CLUSTER2, vp->id);
>> +			break;
>> +		case ROCKCHIP_VOP2_CLUSTER3:
>> +			port_sel &= ~RK3588_OVL_PORT_SEL__CLUSTER3;
>> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__CLUSTER3, vp->id);
>> +			break;
>>   		case ROCKCHIP_VOP2_ESMART0:
>>   			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART0;
>>   			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART0, vp->id);
>> @@ -2019,6 +2312,14 @@ static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
>>   			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART1;
>>   			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART1, vp->id);
>>   			break;
>> +		case ROCKCHIP_VOP2_ESMART2:
>> +			port_sel &= ~RK3588_OVL_PORT_SEL__ESMART2;
>> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__ESMART2, vp->id);
>> +			break;
>> +		case ROCKCHIP_VOP2_ESMART3:
>> +			port_sel &= ~RK3588_OVL_PORT_SEL__ESMART3;
>> +			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__ESMART3, vp->id);
>> +			break;
>>   		case ROCKCHIP_VOP2_SMART0:
>>   			port_sel &= ~RK3568_OVL_PORT_SEL__SMART0;
>>   			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART0, vp->id);
>> @@ -2760,6 +3061,9 @@ static int vop2_bind(struct device *dev, struct device *master, void *data)
>>   	}
>>   
>>   	vop2->sys_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
> This already lacks an error check, shame on me...
>
>> +	vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
>> +	vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
>> +	vop2->sys_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pmu");
> ... but please don't duplicate that.

It a little difficult to find a proper way to do the check, as not every soc need all these phandles.

Do i need check it per soc?

>
>>   
>>   	vop2->hclk = devm_clk_get(vop2->dev, "hclk");
>>   	if (IS_ERR(vop2->hclk)) {
>> @@ -2773,6 +3077,12 @@ static int vop2_bind(struct device *dev, struct device *master, void *data)
>>   		return PTR_ERR(vop2->aclk);
>>   	}
>>   
>> +	vop2->pclk = devm_clk_get_optional(vop2->dev, "pclk_vop");
>> +	if (IS_ERR(vop2->pclk)) {
>> +		drm_err(vop2->drm, "failed to get pclk source\n");
>> +		return PTR_ERR(vop2->pclk);
>> +	}
>> +
>>   	vop2->irq = platform_get_irq(pdev, 0);
>>   	if (vop2->irq < 0) {
>>   		drm_err(vop2->drm, "cannot find irq for vop2\n");
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> index 7175f46a2014..2fffe580b215 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> @@ -16,6 +16,7 @@
>>   #define WIN_FEATURE_AFBDC		BIT(0)
>>   #define WIN_FEATURE_CLUSTER		BIT(1)
>>   
>> +#define HIWORD_UPDATE(v, h, l)  ((GENMASK(h, l) << 16) | ((v) << (l)))
>>   /*
>>    *  the delay number of a window in different mode.
>>    */
>> @@ -38,6 +39,18 @@ enum vop2_scale_down_mode {
>>   	VOP2_SCALE_DOWN_AVG,
>>   };
>>   
>> +/*
>> + * vop2 internal power domain id,
>> + * should be all none zero, 0 will be treat as invalid;
>> + */
>> +#define VOP2_PD_CLUSTER0	BIT(0)
>> +#define VOP2_PD_CLUSTER1	BIT(1)
>> +#define VOP2_PD_CLUSTER2	BIT(2)
>> +#define VOP2_PD_CLUSTER3	BIT(3)
>> +#define VOP2_PD_DSC_8K		BIT(5)
>> +#define VOP2_PD_DSC_4K		BIT(6)
>> +#define VOP2_PD_ESMART		BIT(7)
>> +
>>   enum vop2_win_regs {
>>   	VOP2_WIN_ENABLE,
>>   	VOP2_WIN_FORMAT,
>> @@ -192,6 +205,11 @@ enum dst_factor_mode {
>>   };
>>   
>>   #define RK3568_GRF_VO_CON1			0x0364
>> +
>> +#define RK3588_GRF_SOC_CON1			0x0304
>> +#define RK3588_GRF_VOP_CON2			0x08
>> +#define RK3588_GRF_VO1_CON0			0x00
>> +
>>   /* System registers definition */
>>   #define RK3568_REG_CFG_DONE			0x000
>>   #define RK3568_VERSION_INFO			0x004
>> @@ -200,6 +218,7 @@ enum dst_factor_mode {
>>   #define RK3568_DSP_IF_EN			0x028
>>   #define RK3568_DSP_IF_CTRL			0x02c
>>   #define RK3568_DSP_IF_POL			0x030
>> +#define RK3588_SYS_PD_CTRL			0x034
>>   #define RK3568_WB_CTRL				0x40
>>   #define RK3568_WB_XSCAL_FACTOR			0x44
>>   #define RK3568_WB_YRGB_MST			0x48
>> @@ -223,6 +242,7 @@ enum dst_factor_mode {
>>   #define RK3568_VP_DSP_CTRL			0x00
>>   #define RK3568_VP_MIPI_CTRL			0x04
>>   #define RK3568_VP_COLOR_BAR_CTRL		0x08
>> +#define RK3588_VP_CLK_CTRL			0x0C
>>   #define RK3568_VP_3D_LUT_CTRL			0x10
>>   #define RK3568_VP_3D_LUT_MST			0x20
>>   #define RK3568_VP_DSP_BG			0x2C
>> @@ -364,6 +384,9 @@ enum dst_factor_mode {
>>   #define RK3568_VP_DSP_CTRL__CORE_DCLK_DIV		BIT(4)
>>   #define RK3568_VP_DSP_CTRL__OUT_MODE			GENMASK(3, 0)
>>   
>> +#define RK3588_VP_CLK_CTRL__DCLK_OUT_DIV		GENMASK(3, 2)
>> +#define RK3588_VP_CLK_CTRL__DCLK_CORE_DIV		GENMASK(1, 0)
>> +
>>   #define RK3568_VP_POST_SCL_CTRL__VSCALEDOWN		BIT(1)
>>   #define RK3568_VP_POST_SCL_CTRL__HSCALEDOWN		BIT(0)
>>   
>> @@ -382,11 +405,37 @@ enum dst_factor_mode {
>>   #define RK3568_SYS_DSP_INFACE_EN_HDMI			BIT(1)
>>   #define RK3568_SYS_DSP_INFACE_EN_RGB			BIT(0)
>>   
>> +#define RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX		GENMASK(22, 21)
>> +#define RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX		GENMASK(20, 20)
>> +#define RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX		GENMASK(19, 18)
>> +#define RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX		GENMASK(17, 16)
>> +#define RK3588_SYS_DSP_INFACE_EN_DP1_MUX		GENMASK(15, 14)
>> +#define RK3588_SYS_DSP_INFACE_EN_DP0_MUX		GENMASK(13, 12)
>> +#define RK3588_SYS_DSP_INFACE_EN_DPI			GENMASK(9, 8)
>> +#define RK3588_SYS_DSP_INFACE_EN_MIPI1			BIT(7)
>> +#define RK3588_SYS_DSP_INFACE_EN_MIPI0			BIT(6)
>> +#define RK3588_SYS_DSP_INFACE_EN_HDMI1			BIT(5)
>> +#define RK3588_SYS_DSP_INFACE_EN_EDP1			BIT(4)
>> +#define RK3588_SYS_DSP_INFACE_EN_HDMI0			BIT(3)
>> +#define RK3588_SYS_DSP_INFACE_EN_EDP0			BIT(2)
>> +#define RK3588_SYS_DSP_INFACE_EN_DP1			BIT(1)
>> +#define RK3588_SYS_DSP_INFACE_EN_DP0			BIT(0)
>> +
>> +#define RK3588_DSP_IF_MIPI1_PCLK_DIV			GENMASK(27, 26)
>> +#define RK3588_DSP_IF_MIPI0_PCLK_DIV			GENMASK(25, 24)
>> +#define RK3588_DSP_IF_EDP_HDMI1_PCLK_DIV		GENMASK(22, 22)
>> +#define RK3588_DSP_IF_EDP_HDMI1_DCLK_DIV		GENMASK(21, 20)
>> +#define RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV		GENMASK(18, 18)
>> +#define RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV		GENMASK(17, 16)
>> +
>>   #define RK3568_DSP_IF_POL__MIPI_PIN_POL			GENMASK(19, 16)
>>   #define RK3568_DSP_IF_POL__EDP_PIN_POL			GENMASK(15, 12)
>>   #define RK3568_DSP_IF_POL__HDMI_PIN_POL			GENMASK(7, 4)
>>   #define RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL		GENMASK(3, 0)
>>   
>> +#define RK3588_DSP_IF_POL__DP1_PIN_POL			GENMASK(14, 12)
>> +#define RK3588_DSP_IF_POL__DP0_PIN_POL			GENMASK(10, 8)
>> +
>>   #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2_PHASE_LOCK	BIT(5)
>>   #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2			BIT(4)
>>   
>> @@ -407,8 +456,12 @@ enum dst_factor_mode {
>>   #define RK3568_OVL_PORT_SEL__SEL_PORT			GENMASK(31, 16)
>>   #define RK3568_OVL_PORT_SEL__SMART1			GENMASK(31, 30)
>>   #define RK3568_OVL_PORT_SEL__SMART0			GENMASK(29, 28)
>> +#define RK3588_OVL_PORT_SEL__ESMART3			GENMASK(31, 30)
>> +#define RK3588_OVL_PORT_SEL__ESMART2			GENMASK(29, 28)
>>   #define RK3568_OVL_PORT_SEL__ESMART1			GENMASK(27, 26)
>>   #define RK3568_OVL_PORT_SEL__ESMART0			GENMASK(25, 24)
>> +#define RK3588_OVL_PORT_SEL__CLUSTER3			GENMASK(23, 22)
>> +#define RK3588_OVL_PORT_SEL__CLUSTER2			GENMASK(21, 20)
>>   #define RK3568_OVL_PORT_SEL__CLUSTER1			GENMASK(19, 18)
>>   #define RK3568_OVL_PORT_SEL__CLUSTER0			GENMASK(17, 16)
>>   #define RK3568_OVL_PORT_SET__PORT2_MUX			GENMASK(11, 8)
>> @@ -421,6 +474,10 @@ enum dst_factor_mode {
>>   #define RK3568_CLUSTER_DLY_NUM__CLUSTER0_1		GENMASK(15, 8)
>>   #define RK3568_CLUSTER_DLY_NUM__CLUSTER0_0		GENMASK(7, 0)
>>   
>> +#define RK3568_CLUSTER_WIN_CTRL0__WIN0_EN		BIT(0)
>> +
>> +#define RK3568_SMART_REGION0_CTRL__WIN0_EN		BIT(0)
>> +
>>   #define RK3568_SMART_DLY_NUM__SMART1			GENMASK(31, 24)
>>   #define RK3568_SMART_DLY_NUM__SMART0			GENMASK(23, 16)
>>   #define RK3568_SMART_DLY_NUM__ESMART1			GENMASK(15, 8)
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> index 22288ad7f326..4745a9260cf8 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> @@ -34,6 +34,28 @@ static const uint32_t formats_cluster[] = {
>>   	DRM_FORMAT_Y210, /* yuv422_10bit non-Linear mode only */
>>   };
>>   
>> +static const uint32_t formats_esmart[] = {
>> +	DRM_FORMAT_XRGB8888,
>> +	DRM_FORMAT_ARGB8888,
>> +	DRM_FORMAT_XBGR8888,
>> +	DRM_FORMAT_ABGR8888,
>> +	DRM_FORMAT_RGB888,
>> +	DRM_FORMAT_BGR888,
>> +	DRM_FORMAT_RGB565,
>> +	DRM_FORMAT_BGR565,
>> +	DRM_FORMAT_NV12, /* yuv420_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV21, /* yvu420_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV16, /* yuv422_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV61, /* yvu422_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV24, /* yuv444_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV42, /* yvu444_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV15, /* yuv420_10bit linear mode, 2 plane, no padding */
>> +	DRM_FORMAT_YVYU, /* yuv422_8bit[YVYU] linear mode */
>> +	DRM_FORMAT_VYUY, /* yuv422_8bit[VYUY] linear mode */
>> +	DRM_FORMAT_YUYV, /* yuv422_8bit[YUYV] linear mode */
>> +	DRM_FORMAT_UYVY, /* yuv422_8bit[UYVY] linear mode */
>> +};
>> +
>>   static const uint32_t formats_rk356x_esmart[] = {
>>   	DRM_FORMAT_XRGB8888,
>>   	DRM_FORMAT_ARGB8888,
>> @@ -234,6 +256,186 @@ static const struct vop2_win_data rk3568_vop_win_data[] = {
>>   	},
>>   };
>>   
>> +static const struct vop2_video_port_data rk3588_vop_video_ports[] = {
>> +	{
>> +		.id = 0,
>> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
>> +		.gamma_lut_len = 1024,
>> +		.cubic_lut_len = 9 * 9 * 9, /* 9x9x9 */
>> +		.max_output = { 4096, 2304 },
>> +		/* hdr2sdr sdr2hdr hdr2hdr sdr2sdr */
>> +		.pre_scan_max_dly = { 76, 65, 65, 54 },
>> +		.offset = 0xc00,
>> +	}, {
>> +		.id = 1,
>> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
>> +		.gamma_lut_len = 1024,
>> +		.cubic_lut_len = 729, /* 9x9x9 */
>> +		.max_output = { 4096, 2304 },
>> +		.pre_scan_max_dly = { 76, 65, 65, 54 },
>> +		.offset = 0xd00,
>> +	}, {
>> +		.id = 2,
>> +		.feature = VOP_FEATURE_OUTPUT_10BIT,
>> +		.gamma_lut_len = 1024,
>> +		.cubic_lut_len = 17 * 17 * 17, /* 17x17x17 */
>> +		.max_output = { 4096, 2304 },
>> +		.pre_scan_max_dly = { 52, 52, 52, 52 },
>> +		.offset = 0xe00,
>> +	}, {
>> +		.id = 3,
>> +		.gamma_lut_len = 1024,
>> +		.max_output = { 2048, 1536 },
>> +		.pre_scan_max_dly = { 52, 52, 52, 52 },
>> +		.offset = 0xf00,
>> +	},
>> +};
>> +
>> +/*
>> + * rk3588 vop with 4 cluster, 4 esmart win.
>> + * Every cluster can work as 4K win or split into two win.
>> + * All win in cluster support AFBCD.
>> + *
>> + * Every esmart win and smart win support 4 Multi-region.
>> + *
>> + * Scale filter mode:
>> + *
>> + * * Cluster:  bicubic for horizontal scale up, others use bilinear
>> + * * ESmart:
>> + *    * nearest-neighbor/bilinear/bicubic for scale up
>> + *    * nearest-neighbor/bilinear/average for scale down
>> + *
>> + * AXI Read ID assignment:
>> + * Two AXI bus:
>> + * AXI0 is a read/write bus with a higher performance.
>> + * AXI1 is a read only bus.
>> + *
>> + * Every window on a AXI bus must assigned two unique
>> + * read id(yrgb_id/uv_id, valid id are 0x1~0xe).
>> + *
>> + * AXI0:
>> + * Cluster0/1, Esmart0/1, WriteBack
>> + *
>> + * AXI 1:
>> + * Cluster2/3, Esmart2/3
>> + *
>> + */
>> +static const struct vop2_win_data rk3588_vop_win_data[] = {
>> +	{
>> +		.name = "Cluster0-win0",
>> +		.phys_id = ROCKCHIP_VOP2_CLUSTER0,
>> +		.base = 0x1000,
>> +		.formats = formats_cluster,
>> +		.nformats = ARRAY_SIZE(formats_cluster),
>> +		.format_modifiers = format_modifiers_afbc,
>> +		.layer_sel_id = 0,
>> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> +		.max_upscale_factor = 4,
>> +		.max_downscale_factor = 4,
>> +		.dly = { 4, 26, 29 },
>> +		.type = DRM_PLANE_TYPE_PRIMARY,
>> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
>> +	}, {
>> +		.name = "Cluster1-win0",
>> +		.phys_id = ROCKCHIP_VOP2_CLUSTER1,
>> +		.base = 0x1200,
>> +		.formats = formats_cluster,
>> +		.nformats = ARRAY_SIZE(formats_cluster),
>> +		.format_modifiers = format_modifiers_afbc,
>> +		.layer_sel_id = 1,
>> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_PRIMARY,
>> +		.max_upscale_factor = 4,
>> +		.max_downscale_factor = 4,
>> +		.dly = { 4, 26, 29 },
>> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
>> +	}, {
>> +		.name = "Cluster2-win0",
>> +		.phys_id = ROCKCHIP_VOP2_CLUSTER2,
>> +		.base = 0x1400,
>> +		.formats = formats_cluster,
>> +		.nformats = ARRAY_SIZE(formats_cluster),
>> +		.format_modifiers = format_modifiers_afbc,
>> +		.layer_sel_id = 4,
>> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_PRIMARY,
>> +		.max_upscale_factor = 4,
>> +		.max_downscale_factor = 4,
>> +		.dly = { 4, 26, 29 },
>> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
>> +	}, {
>> +		.name = "Cluster3-win0",
>> +		.phys_id = ROCKCHIP_VOP2_CLUSTER3,
>> +		.base = 0x1600,
>> +		.formats = formats_cluster,
>> +		.nformats = ARRAY_SIZE(formats_cluster),
>> +		.format_modifiers = format_modifiers_afbc,
>> +		.layer_sel_id = 5,
>> +		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> +				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_PRIMARY,
>> +		.max_upscale_factor = 4,
>> +		.max_downscale_factor = 4,
>> +		.dly = { 4, 26, 29 },
>> +		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
>> +	}, {
>> +		.name = "Esmart0-win0",
>> +		.phys_id = ROCKCHIP_VOP2_ESMART0,
>> +		.formats = formats_esmart,
>> +		.nformats = ARRAY_SIZE(formats_esmart),
>> +		.format_modifiers = format_modifiers,
>> +		.base = 0x1800,
>> +		.layer_sel_id = 2,
>> +		.supported_rotations = DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_OVERLAY,
>> +		.max_upscale_factor = 8,
>> +		.max_downscale_factor = 8,
>> +		.dly = { 23, 45, 48 },
>> +	}, {
>> +		.name = "Esmart1-win0",
>> +		.phys_id = ROCKCHIP_VOP2_ESMART1,
>> +		.formats = formats_esmart,
>> +		.nformats = ARRAY_SIZE(formats_esmart),
>> +		.format_modifiers = format_modifiers,
>> +		.base = 0x1a00,
>> +		.layer_sel_id = 3,
>> +		.supported_rotations = DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_OVERLAY,
>> +		.max_upscale_factor = 8,
>> +		.max_downscale_factor = 8,
>> +		.dly = { 23, 45, 48 },
>> +	}, {
>> +		.name = "Esmart2-win0",
>> +		.phys_id = ROCKCHIP_VOP2_ESMART2,
>> +		.base = 0x1c00,
>> +		.formats = formats_esmart,
>> +		.nformats = ARRAY_SIZE(formats_esmart),
>> +		.format_modifiers = format_modifiers,
>> +		.layer_sel_id = 6,
>> +		.supported_rotations = DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_OVERLAY,
>> +		.max_upscale_factor = 8,
>> +		.max_downscale_factor = 8,
>> +		.dly = { 23, 45, 48 },
>> +	}, {
>> +		.name = "Esmart3-win0",
>> +		.phys_id = ROCKCHIP_VOP2_ESMART3,
>> +		.formats = formats_esmart,
>> +		.nformats = ARRAY_SIZE(formats_esmart),
>> +		.format_modifiers = format_modifiers,
>> +		.base = 0x1e00,
>> +		.layer_sel_id = 7,
>> +		.supported_rotations = DRM_MODE_REFLECT_Y,
>> +		.type = DRM_PLANE_TYPE_OVERLAY,
>> +		.max_upscale_factor = 8,
>> +		.max_downscale_factor = 8,
>> +		.dly = { 23, 45, 48 },
>> +	},
>> +};
>> +
>>   static const struct vop2_data rk3566_vop = {
>>   	.nr_vps = 3,
>>   	.max_input = { 4096, 2304 },
>> @@ -254,6 +456,16 @@ static const struct vop2_data rk3568_vop = {
>>   	.soc_id = 3568,
>>   };
>>   
>> +static const struct vop2_data rk3588_vop = {
>> +	.nr_vps = 4,
>> +	.max_input = { 4096, 4320 },
>> +	.max_output = { 4096, 4320 },
>> +	.vp = rk3588_vop_video_ports,
>> +	.win = rk3588_vop_win_data,
>> +	.win_size = ARRAY_SIZE(rk3588_vop_win_data),
>> +	.soc_id = 3588,
>> +};
>> +
>>   static const struct of_device_id vop2_dt_match[] = {
>>   	{
>>   		.compatible = "rockchip,rk3566-vop",
>> @@ -261,6 +473,9 @@ static const struct of_device_id vop2_dt_match[] = {
>>   	}, {
>>   		.compatible = "rockchip,rk3568-vop",
>>   		.data = &rk3568_vop,
>> +	}, {
>> +		.compatible = "rockchip,rk3588-vop",
>> +		.data = &rk3588_vop
>>   	}, {
>>   	},
>>   };
>> diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
>> index 6e66a802b96a..668f199df9f0 100644
>> --- a/include/dt-bindings/soc/rockchip,vop2.h
>> +++ b/include/dt-bindings/soc/rockchip,vop2.h
>> @@ -10,5 +10,9 @@
>>   #define ROCKCHIP_VOP2_EP_LVDS0	5
>>   #define ROCKCHIP_VOP2_EP_MIPI1	6
>>   #define ROCKCHIP_VOP2_EP_LVDS1	7
>> +#define ROCKCHIP_VOP2_EP_HDMI1	8
>> +#define ROCKCHIP_VOP2_EP_EDP1	9
>> +#define ROCKCHIP_VOP2_EP_DP0	10
>> +#define ROCKCHIP_VOP2_EP_DP1	11
>>   
>>   #endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
>> -- 
>> 2.34.1
>>
>>
Sebastian Reichel Nov. 16, 2023, 1:47 p.m. UTC | #9
Hi,

On Thu, Nov 16, 2023 at 06:39:40PM +0800, Andy Yan wrote:
> > >   	vop2->sys_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
> > This already lacks an error check, shame on me...
> > 
> > > +	vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
> > > +	vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
> > > +	vop2->sys_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pmu");
> > ... but please don't duplicate that.
> 
> It a little difficult to find a proper way to do the check, as not every soc need all these phandles.
> 
> Do i need check it per soc?

I suggest adding a u32 flags to struct vop2_data and then have
something like this:

if (vop2_data->flags & VOP2_HAS_VOP_GRF) {
    vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
    if (IS_ERR(vop2->vop_grf))
        return dev_err_probe(dev, PTR_ERR(vop2->vop_grf) "cannot get vop-grf");
}

if (vop2_data->flags & VOP2_HAS_VO1_GRF) {
    vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
    if (IS_ERR(vop2->vo1_grf))
        return dev_err_probe(dev, PTR_ERR(vop2->vo1_grf) "cannot get vo1-grf");
}

...

Greetings,

-- Sebastian
Rob Herring (Arm) Nov. 16, 2023, 7:27 p.m. UTC | #10
On Tue, Nov 14, 2023 at 07:28:55PM +0800, Andy Yan wrote:
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> VOP2 on rk3588:
> 
> Four video ports:
> VP0 Max 4096x2160
> VP1 Max 4096x2160
> VP2 Max 4096x2160
> VP3 Max 2048x1080
> 
> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
> 4 4K Esmart windows with line RGB/YUV support
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 324 ++++++++++++++++++-
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  57 ++++
>  drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 215 ++++++++++++
>  include/dt-bindings/soc/rockchip,vop2.h      |   4 +

This is part of the binding and belongs in the binding patch.
Andy Yan Nov. 17, 2023, 7:06 a.m. UTC | #11
Hi Sebastian:

On 11/16/23 21:47, Sebastian Reichel wrote:
> Hi,
>
> On Thu, Nov 16, 2023 at 06:39:40PM +0800, Andy Yan wrote:
>>>>    	vop2->sys_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
>>> This already lacks an error check, shame on me...
>>>
>>>> +	vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
>>>> +	vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
>>>> +	vop2->sys_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pmu");
>>> ... but please don't duplicate that.
>> It a little difficult to find a proper way to do the check, as not every soc need all these phandles.
>>
>> Do i need check it per soc?
> I suggest adding a u32 flags to struct vop2_data and then have
> something like this:
>
> if (vop2_data->flags & VOP2_HAS_VOP_GRF) {
>      vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
>      if (IS_ERR(vop2->vop_grf))
>          return dev_err_probe(dev, PTR_ERR(vop2->vop_grf) "cannot get vop-grf");
> }
>
> if (vop2_data->flags & VOP2_HAS_VO1_GRF) {
>      vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
>      if (IS_ERR(vop2->vo1_grf))
>          return dev_err_probe(dev, PTR_ERR(vop2->vo1_grf) "cannot get vo1-grf");
> }
>
> ...


I can do it like this if Sascha is also happy with it.

>
> Greetings,
>
> -- Sebastian
Sascha Hauer Nov. 17, 2023, 9:39 a.m. UTC | #12
On Fri, Nov 17, 2023 at 03:06:35PM +0800, Andy Yan wrote:
> Hi Sebastian:
> 
> On 11/16/23 21:47, Sebastian Reichel wrote:
> > Hi,
> > 
> > On Thu, Nov 16, 2023 at 06:39:40PM +0800, Andy Yan wrote:
> > > > >    	vop2->sys_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
> > > > This already lacks an error check, shame on me...
> > > > 
> > > > > +	vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
> > > > > +	vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
> > > > > +	vop2->sys_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pmu");
> > > > ... but please don't duplicate that.
> > > It a little difficult to find a proper way to do the check, as not every soc need all these phandles.
> > > 
> > > Do i need check it per soc?
> > I suggest adding a u32 flags to struct vop2_data and then have
> > something like this:
> > 
> > if (vop2_data->flags & VOP2_HAS_VOP_GRF) {
> >      vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
> >      if (IS_ERR(vop2->vop_grf))
> >          return dev_err_probe(dev, PTR_ERR(vop2->vop_grf) "cannot get vop-grf");
> > }
> > 
> > if (vop2_data->flags & VOP2_HAS_VO1_GRF) {
> >      vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
> >      if (IS_ERR(vop2->vo1_grf))
> >          return dev_err_probe(dev, PTR_ERR(vop2->vo1_grf) "cannot get vo1-grf");
> > }
> > 
> > ...
> 
> 
> I can do it like this if Sascha is also happy with it.

Yes, I am.

Sascha
Jonas Karlman Nov. 17, 2023, 11:46 p.m. UTC | #13
On 2023-11-14 12:28, Andy Yan wrote:
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> VOP2 on rk3588:
> 
> Four video ports:
> VP0 Max 4096x2160
> VP1 Max 4096x2160
> VP2 Max 4096x2160
> VP3 Max 2048x1080
> 
> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
> 4 4K Esmart windows with line RGB/YUV support
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 324 ++++++++++++++++++-
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  57 ++++
>  drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 215 ++++++++++++
>  include/dt-bindings/soc/rockchip,vop2.h      |   4 +
>  4 files changed, 593 insertions(+), 7 deletions(-)
> 

[...]

> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> index 22288ad7f326..4745a9260cf8 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> @@ -34,6 +34,28 @@ static const uint32_t formats_cluster[] = {
>  	DRM_FORMAT_Y210, /* yuv422_10bit non-Linear mode only */
>  };
>  
> +static const uint32_t formats_esmart[] = {
> +	DRM_FORMAT_XRGB8888,
> +	DRM_FORMAT_ARGB8888,
> +	DRM_FORMAT_XBGR8888,
> +	DRM_FORMAT_ABGR8888,
> +	DRM_FORMAT_RGB888,
> +	DRM_FORMAT_BGR888,
> +	DRM_FORMAT_RGB565,
> +	DRM_FORMAT_BGR565,
> +	DRM_FORMAT_NV12, /* yuv420_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV21, /* yvu420_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV16, /* yuv422_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV61, /* yvu422_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV24, /* yuv444_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV42, /* yvu444_8bit linear mode, 2 plane */
> +	DRM_FORMAT_NV15, /* yuv420_10bit linear mode, 2 plane, no padding */

NV20 and NV30 drm format have now been merged into mainline linux,
please add these missing formats. The patch below adds support for them
to rk356x part of vop2 driver.

drm/rockchip: vop2: Add NV20 and NV30 support
https://lore.kernel.org/linux-rockchip/20231025213248.2641962-1-jonas@kwiboo.se/

NV15/NV20/NV30 formats can be tested using modetest from latest main
of libdrm.

modetest: add support for DRM_FORMAT_NV{15,20,30}
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/329

Regards,
Jonas

> +	DRM_FORMAT_YVYU, /* yuv422_8bit[YVYU] linear mode */
> +	DRM_FORMAT_VYUY, /* yuv422_8bit[VYUY] linear mode */
> +	DRM_FORMAT_YUYV, /* yuv422_8bit[YUYV] linear mode */
> +	DRM_FORMAT_UYVY, /* yuv422_8bit[UYVY] linear mode */
> +};
> +
>  static const uint32_t formats_rk356x_esmart[] = {
>  	DRM_FORMAT_XRGB8888,
>  	DRM_FORMAT_ARGB8888,

[...]
Andy Yan Nov. 18, 2023, 12:31 a.m. UTC | #14
Hi Jonas:

On 11/18/23 07:46, Jonas Karlman wrote:
> On 2023-11-14 12:28, Andy Yan wrote:
>> From: Andy Yan <andy.yan@rock-chips.com>
>>
>> VOP2 on rk3588:
>>
>> Four video ports:
>> VP0 Max 4096x2160
>> VP1 Max 4096x2160
>> VP2 Max 4096x2160
>> VP3 Max 2048x1080
>>
>> 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
>> 4 4K Esmart windows with line RGB/YUV support
>>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>> ---
>>
>>   drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 324 ++++++++++++++++++-
>>   drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  57 ++++
>>   drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 215 ++++++++++++
>>   include/dt-bindings/soc/rockchip,vop2.h      |   4 +
>>   4 files changed, 593 insertions(+), 7 deletions(-)
>>
> [...]
>
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> index 22288ad7f326..4745a9260cf8 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> @@ -34,6 +34,28 @@ static const uint32_t formats_cluster[] = {
>>   	DRM_FORMAT_Y210, /* yuv422_10bit non-Linear mode only */
>>   };
>>   
>> +static const uint32_t formats_esmart[] = {
>> +	DRM_FORMAT_XRGB8888,
>> +	DRM_FORMAT_ARGB8888,
>> +	DRM_FORMAT_XBGR8888,
>> +	DRM_FORMAT_ABGR8888,
>> +	DRM_FORMAT_RGB888,
>> +	DRM_FORMAT_BGR888,
>> +	DRM_FORMAT_RGB565,
>> +	DRM_FORMAT_BGR565,
>> +	DRM_FORMAT_NV12, /* yuv420_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV21, /* yvu420_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV16, /* yuv422_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV61, /* yvu422_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV24, /* yuv444_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV42, /* yvu444_8bit linear mode, 2 plane */
>> +	DRM_FORMAT_NV15, /* yuv420_10bit linear mode, 2 plane, no padding */
> NV20 and NV30 drm format have now been merged into mainline linux,
> please add these missing formats. The patch below adds support for them
> to rk356x part of vop2 driver.


Thanks for your reminder and your efforts to make these formats land

mainline. I will add it in the next version.

>
> drm/rockchip: vop2: Add NV20 and NV30 support
> https://lore.kernel.org/linux-rockchip/20231025213248.2641962-1-jonas@kwiboo.se/
>
> NV15/NV20/NV30 formats can be tested using modetest from latest main
> of libdrm.
>
> modetest: add support for DRM_FORMAT_NV{15,20,30}
> https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/329
>
> Regards,
> Jonas
>
>> +	DRM_FORMAT_YVYU, /* yuv422_8bit[YVYU] linear mode */
>> +	DRM_FORMAT_VYUY, /* yuv422_8bit[VYUY] linear mode */
>> +	DRM_FORMAT_YUYV, /* yuv422_8bit[YUYV] linear mode */
>> +	DRM_FORMAT_UYVY, /* yuv422_8bit[UYVY] linear mode */
>> +};
>> +
>>   static const uint32_t formats_rk356x_esmart[] = {
>>   	DRM_FORMAT_XRGB8888,
>>   	DRM_FORMAT_ARGB8888,
> [...]
diff mbox series

Patch

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index 0d7dc543bef3..ba61c0233937 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -191,6 +191,9 @@  struct vop2 {
 	struct regmap *map;
 
 	struct regmap *sys_grf;
+	struct regmap *vop_grf;
+	struct regmap *vo1_grf;
+	struct regmap *sys_pmu;
 
 	/* physical map length of vop2 register */
 	u32 len;
@@ -209,6 +212,7 @@  struct vop2 {
 	unsigned int enable_count;
 	struct clk *hclk;
 	struct clk *aclk;
+	struct clk *pclk;
 
 	/* optional internal rgb encoder */
 	struct rockchip_rgb *rgb;
@@ -217,6 +221,13 @@  struct vop2 {
 	struct vop2_win win[];
 };
 
+#define vop2_output_if_is_hdmi(x)	(x == ROCKCHIP_VOP2_EP_HDMI0 || x == ROCKCHIP_VOP2_EP_HDMI1)
+#define vop2_output_if_is_dp(x)		(x == ROCKCHIP_VOP2_EP_DP0 || x == ROCKCHIP_VOP2_EP_DP1)
+#define vop2_output_if_is_edp(x)	(x == ROCKCHIP_VOP2_EP_EDP0 || x == ROCKCHIP_VOP2_EP_EDP1)
+#define vop2_output_if_is_mipi(x)	(x == ROCKCHIP_VOP2_EP_MIPI0 || x == ROCKCHIP_VOP2_EP_MIPI1)
+#define vop2_output_if_is_lvds(x)	(x == ROCKCHIP_VOP2_EP_LVDS0 || x == ROCKCHIP_VOP2_EP_LVDS1)
+#define vop2_output_if_is_dpi(x)	(x == ROCKCHIP_VOP2_EP_RGB0)
+
 static const struct regmap_config vop2_regmap_config;
 
 static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc)
@@ -271,9 +282,12 @@  static bool vop2_cluster_window(const struct vop2_win *win)
 static void vop2_cfg_done(struct vop2_video_port *vp)
 {
 	struct vop2 *vop2 = vp->vop2;
+	u32 val;
 
-	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE,
-			BIT(vp->id) | RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
+	val = BIT(vp->id) | (BIT(vp->id) << 16) |
+		RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN;
+
+	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE, val);
 }
 
 static void vop2_win_disable(struct vop2_win *win)
@@ -863,13 +877,32 @@  static int vop2_core_clks_prepare_enable(struct vop2 *vop2)
 		goto err;
 	}
 
+	ret = clk_prepare_enable(vop2->pclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable pclk - %d\n", ret);
+		goto err1;
+	}
+
 	return 0;
+err1:
+	clk_disable_unprepare(vop2->aclk);
 err:
 	clk_disable_unprepare(vop2->hclk);
 
 	return ret;
 }
 
+static void vop2_power_domain_all_on(struct vop2 *vop2)
+{
+	u32 pd;
+
+	pd = vop2_readl(vop2, RK3588_SYS_PD_CTRL);
+	pd &= ~(VOP2_PD_CLUSTER0 | VOP2_PD_CLUSTER1 | VOP2_PD_CLUSTER2 |
+		VOP2_PD_CLUSTER3 | VOP2_PD_ESMART);
+
+	vop2_writel(vop2, RK3588_SYS_PD_CTRL, pd);
+}
+
 static void vop2_enable(struct vop2 *vop2)
 {
 	int ret;
@@ -901,6 +934,9 @@  static void vop2_enable(struct vop2 *vop2)
 	if (vop2->data->soc_id == 3566)
 		vop2_writel(vop2, RK3568_OTP_WIN_EN, 1);
 
+	if (vop2->data->soc_id == 3588)
+		vop2_power_domain_all_on(vop2);
+
 	vop2_writel(vop2, RK3568_REG_CFG_DONE, RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
 
 	/*
@@ -926,6 +962,7 @@  static void vop2_disable(struct vop2 *vop2)
 
 	pm_runtime_put_sync(vop2->dev);
 
+	clk_disable_unprepare(vop2->pclk);
 	clk_disable_unprepare(vop2->aclk);
 	clk_disable_unprepare(vop2->hclk);
 }
@@ -1293,7 +1330,11 @@  static void vop2_plane_atomic_update(struct drm_plane *plane,
 			vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
 		vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
 		vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
-		vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
+		if (vop2->data->soc_id == 3566 || vop2->data->soc_id == 3568)
+			vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
+		else
+			vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 1);
+
 		vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
 		transform_offset = vop2_afbc_transform_offset(pstate, half_block_en);
 		vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
@@ -1481,10 +1522,10 @@  static void vop2_post_config(struct drm_crtc *crtc)
 	vop2_vp_write(vp, RK3568_VP_DSP_BG, 0);
 }
 
-static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
-				u32 polflags)
+static unsigned long rk3568_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
 {
 	struct vop2 *vop2 = vp->vop2;
+	struct drm_crtc *crtc = &vp->crtc;
 	u32 die, dip;
 
 	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
@@ -1546,13 +1587,257 @@  static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
 		break;
 	default:
 		drm_err(vop2->drm, "Invalid interface id %d on vp%d\n", id, vp->id);
-		return;
+		return 0;
+	}
+
+	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
+
+	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
+	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
+
+	return crtc->state->adjusted_mode.crtc_clock  * 1000LL;
+}
+
+/*
+ * calc the dclk on rk3588
+ * the available div of dclk is 1, 2, 4
+ */
+static unsigned long vop2_calc_dclk(unsigned long child_clk, unsigned long max_dclk)
+{
+	if (child_clk * 4 <= max_dclk)
+		return child_clk * 4;
+	else if (child_clk * 2 <= max_dclk)
+		return child_clk * 2;
+	else if (child_clk <= max_dclk)
+		return child_clk;
+	else
+		return 0;
+}
+
+/*
+ * 4 pixclk/cycle on rk3588
+ * RGB/eDP/HDMI: if_pixclk >= dclk_core
+ * DP: dp_pixclk = dclk_out <= dclk_core
+ * DSI: mipi_pixclk <= dclk_out <= dclk_core
+ */
+static unsigned long vop2_calc_cru_cfg(struct vop2_video_port *vp, int id,
+				       int *dclk_core_div, int *dclk_out_div,
+				       int *if_pixclk_div, int *if_dclk_div)
+{
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_crtc *crtc = &vp->crtc;
+	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+	int output_mode = vcstate->output_mode;
+	unsigned long v_pixclk = adjusted_mode->crtc_clock * 1000LL; /* video timing pixclk */
+	unsigned long dclk_core_rate = v_pixclk >> 2;
+	unsigned long dclk_rate = v_pixclk;
+	unsigned long dclk_out_rate;
+	unsigned long if_dclk_rate;
+	unsigned long if_pixclk_rate;
+	int K = 1;
+
+	if (vop2_output_if_is_hdmi(id)) {
+		/*
+		 * K = 2: dclk_core = if_pixclk_rate > if_dclk_rate
+		 * K = 1: dclk_core = hdmie_edp_dclk > if_pixclk_rate
+		 */
+		if (output_mode == ROCKCHIP_OUT_MODE_YUV420) {
+			dclk_rate = dclk_rate >> 1;
+			K = 2;
+		}
+
+		if_pixclk_rate = (dclk_core_rate << 1) / K;
+		if_dclk_rate = dclk_core_rate / K;
+
+		*if_pixclk_div = dclk_rate / if_pixclk_rate;
+		*if_dclk_div = dclk_rate / if_dclk_rate;
+		*dclk_core_div = dclk_rate / dclk_core_rate;
+	} else if (vop2_output_if_is_edp(id)) {
+		/* edp_pixclk = edp_dclk > dclk_core */
+		if_pixclk_rate = v_pixclk / K;
+		if_dclk_rate = v_pixclk / K;
+		dclk_rate = if_pixclk_rate * K;
+		*dclk_core_div = dclk_rate / dclk_core_rate;
+		*if_pixclk_div = dclk_rate / if_pixclk_rate;
+		*if_dclk_div = *if_pixclk_div;
+	} else if (vop2_output_if_is_dp(id)) {
+		if (output_mode == ROCKCHIP_OUT_MODE_YUV420)
+			dclk_out_rate = v_pixclk >> 3;
+		else
+			dclk_out_rate = v_pixclk >> 2;
+
+		dclk_rate = vop2_calc_dclk(dclk_out_rate, 600000);
+		if (!dclk_rate) {
+			drm_err(vop2->drm, "DP dclk_out_rate out of range, dclk_out_rate: %ld KHZ\n",
+				dclk_out_rate);
+			return -EINVAL;
+		}
+		*dclk_out_div = dclk_rate / dclk_out_rate;
+		*dclk_core_div = dclk_rate / dclk_core_rate;
+	} else if (vop2_output_if_is_mipi(id)) {
+		if_pixclk_rate = dclk_core_rate / K;
+		/* dclk_core = dclk_out * K = if_pixclk * K = v_pixclk / 4 */
+		dclk_out_rate = if_pixclk_rate;
+		/* dclk_rate = N * dclk_core_rate N = (1,2,4 ), we get a little factor here */
+		dclk_rate = vop2_calc_dclk(dclk_out_rate, 600000);
+		if (!dclk_rate) {
+			drm_err(vop2->drm, "MIPI dclk out of range, dclk_out_rate: %ld KHZ\n",
+				dclk_out_rate);
+			return -EINVAL;
+		}
+		*dclk_out_div = dclk_rate / dclk_out_rate;
+		*dclk_core_div = dclk_rate / dclk_core_rate;
+		*if_pixclk_div = 1;       /*mipi pixclk == dclk_out*/
+	} else if (vop2_output_if_is_dpi(id)) {
+		dclk_rate = v_pixclk;
+		*dclk_core_div = dclk_rate / dclk_core_rate;
+	}
+
+	*if_pixclk_div = ilog2(*if_pixclk_div);
+	*if_dclk_div = ilog2(*if_dclk_div);
+	*dclk_core_div = ilog2(*dclk_core_div);
+	*dclk_out_div = ilog2(*dclk_out_div);
+
+	drm_dbg(vop2->drm, "dclk:%ld, pixclk_div;%d,dclk_div:%d\n",
+		dclk_rate, *if_pixclk_div, *if_dclk_div);
+
+	return dclk_rate;
+}
+
+/*
+ * MIPI port mux on rk3588:
+ * 0: Video Port2
+ * 1: Video Port3
+ * 3: Video Port 1(MIPI1 only)
+ */
+static u32 rk3588_get_mipi_port_mux(int vp_id)
+{
+	if (vp_id == 1)
+		return 3;
+	else if (vp_id == 3)
+		return 1;
+	else
+		return 0;
+}
+
+static u32 rk3588_get_hdmi_pol(u32 flags)
+{
+	u32 val;
+
+	val = (flags & DRM_MODE_FLAG_NHSYNC) ? BIT(HSYNC_POSITIVE) : 0;
+	val |= (flags & DRM_MODE_FLAG_NVSYNC) ? BIT(VSYNC_POSITIVE) : 0;
+
+	return val;
+}
+
+static unsigned long rk3588_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
+{
+	struct vop2 *vop2 = vp->vop2;
+	int dclk_core_div, dclk_out_div, if_pixclk_div, if_dclk_div;
+	unsigned long clock;
+	u32 die, dip, div, vp_clk_div, val;
+
+	clock = vop2_calc_cru_cfg(vp, id, &dclk_core_div, &dclk_out_div,
+				  &if_pixclk_div, &if_dclk_div);
+
+	vp_clk_div = FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_CORE_DIV, dclk_core_div);
+	vp_clk_div |= FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_OUT_DIV, dclk_out_div);
+
+	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
+	dip = vop2_readl(vop2, RK3568_DSP_IF_POL);
+	div = vop2_readl(vop2, RK3568_DSP_IF_CTRL);
+
+	switch (id) {
+	case ROCKCHIP_VOP2_EP_HDMI0:
+		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
+		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
+		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
+		die |= RK3588_SYS_DSP_INFACE_EN_HDMI0 |
+			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
+		val = rk3588_get_hdmi_pol(polflags);
+		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 1, 1));
+		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 6, 5));
+		break;
+	case ROCKCHIP_VOP2_EP_HDMI1:
+		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI1_DCLK_DIV, if_dclk_div);
+		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI1_PCLK_DIV, if_pixclk_div);
+		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX;
+		die |= RK3588_SYS_DSP_INFACE_EN_HDMI1 |
+			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX, vp->id);
+		val = rk3588_get_hdmi_pol(polflags);
+		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 4, 4));
+		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 8, 7));
+		break;
+	case ROCKCHIP_VOP2_EP_EDP0:
+		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
+		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
+		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
+		die |= RK3588_SYS_DSP_INFACE_EN_EDP0 |
+			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
+		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 0, 0));
+		break;
+	case ROCKCHIP_VOP2_EP_EDP1:
+		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);
+		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
+		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX;
+		die |= RK3588_SYS_DSP_INFACE_EN_EDP1 |
+			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX, vp->id);
+		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 3, 3));
+		break;
+	case ROCKCHIP_VOP2_EP_MIPI0:
+		div |= FIELD_PREP(RK3588_DSP_IF_MIPI0_PCLK_DIV, if_pixclk_div);
+		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX;
+		val = rk3588_get_mipi_port_mux(vp->id);
+		die |= RK3588_SYS_DSP_INFACE_EN_MIPI0 |
+			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX, !!val);
+		break;
+	case ROCKCHIP_VOP2_EP_MIPI1:
+		div |= FIELD_PREP(RK3588_DSP_IF_MIPI1_PCLK_DIV, if_pixclk_div);
+		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX;
+		val = rk3588_get_mipi_port_mux(vp->id);
+		die |= RK3588_SYS_DSP_INFACE_EN_MIPI1 |
+			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX, val);
+		break;
+	case ROCKCHIP_VOP2_EP_DP0:
+		die &= ~RK3588_SYS_DSP_INFACE_EN_DP0_MUX;
+		die |= RK3588_SYS_DSP_INFACE_EN_DP0 |
+			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_DP0_MUX, vp->id);
+		dip &= ~RK3588_DSP_IF_POL__DP0_PIN_POL;
+		dip |= FIELD_PREP(RK3588_DSP_IF_POL__DP0_PIN_POL, polflags);
+		break;
+	case ROCKCHIP_VOP2_EP_DP1:
+		die &= ~RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX;
+		die |= RK3588_SYS_DSP_INFACE_EN_MIPI1 |
+			   FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX, vp->id);
+		dip &= ~RK3588_DSP_IF_POL__DP1_PIN_POL;
+		dip |= FIELD_PREP(RK3588_DSP_IF_POL__DP1_PIN_POL, polflags);
+		break;
+	default:
+		drm_err(vop2->drm, "Invalid interface id %d on vp%d\n", id, vp->id);
+		return 0;
 	}
 
 	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
 
+	vop2_vp_write(vp, RK3588_VP_CLK_CTRL, vp_clk_div);
 	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
+	vop2_writel(vop2, RK3568_DSP_IF_CTRL, div);
 	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
+
+	return clock;
+}
+
+static unsigned long vop2_set_intf_mux(struct vop2_video_port *vp, int ep_id, u32 polflags)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	if (vop2->data->soc_id == 3566 || vop2->data->soc_id == 3568)
+		return rk3568_set_intf_mux(vp, ep_id, polflags);
+	else if (vop2->data->soc_id == 3588)
+		return rk3588_set_intf_mux(vp, ep_id, polflags);
+	else
+		return 0;
 }
 
 static int us_to_vertical_line(struct drm_display_mode *mode, int us)
@@ -1622,7 +1907,7 @@  static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
 	drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
 		struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
 
-		rk3568_set_intf_mux(vp, rkencoder->crtc_endpoint_id, polflags);
+		clock = vop2_set_intf_mux(vp, rkencoder->crtc_endpoint_id, polflags);
 	}
 
 	if (vcstate->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
@@ -2011,6 +2296,14 @@  static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
 			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER1;
 			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER1, vp->id);
 			break;
+		case ROCKCHIP_VOP2_CLUSTER2:
+			port_sel &= ~RK3588_OVL_PORT_SEL__CLUSTER2;
+			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__CLUSTER2, vp->id);
+			break;
+		case ROCKCHIP_VOP2_CLUSTER3:
+			port_sel &= ~RK3588_OVL_PORT_SEL__CLUSTER3;
+			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__CLUSTER3, vp->id);
+			break;
 		case ROCKCHIP_VOP2_ESMART0:
 			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART0;
 			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART0, vp->id);
@@ -2019,6 +2312,14 @@  static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
 			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART1;
 			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART1, vp->id);
 			break;
+		case ROCKCHIP_VOP2_ESMART2:
+			port_sel &= ~RK3588_OVL_PORT_SEL__ESMART2;
+			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__ESMART2, vp->id);
+			break;
+		case ROCKCHIP_VOP2_ESMART3:
+			port_sel &= ~RK3588_OVL_PORT_SEL__ESMART3;
+			port_sel |= FIELD_PREP(RK3588_OVL_PORT_SEL__ESMART3, vp->id);
+			break;
 		case ROCKCHIP_VOP2_SMART0:
 			port_sel &= ~RK3568_OVL_PORT_SEL__SMART0;
 			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART0, vp->id);
@@ -2760,6 +3061,9 @@  static int vop2_bind(struct device *dev, struct device *master, void *data)
 	}
 
 	vop2->sys_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+	vop2->vop_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vop-grf");
+	vop2->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,vo1-grf");
+	vop2->sys_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pmu");
 
 	vop2->hclk = devm_clk_get(vop2->dev, "hclk");
 	if (IS_ERR(vop2->hclk)) {
@@ -2773,6 +3077,12 @@  static int vop2_bind(struct device *dev, struct device *master, void *data)
 		return PTR_ERR(vop2->aclk);
 	}
 
+	vop2->pclk = devm_clk_get_optional(vop2->dev, "pclk_vop");
+	if (IS_ERR(vop2->pclk)) {
+		drm_err(vop2->drm, "failed to get pclk source\n");
+		return PTR_ERR(vop2->pclk);
+	}
+
 	vop2->irq = platform_get_irq(pdev, 0);
 	if (vop2->irq < 0) {
 		drm_err(vop2->drm, "cannot find irq for vop2\n");
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
index 7175f46a2014..2fffe580b215 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
@@ -16,6 +16,7 @@ 
 #define WIN_FEATURE_AFBDC		BIT(0)
 #define WIN_FEATURE_CLUSTER		BIT(1)
 
+#define HIWORD_UPDATE(v, h, l)  ((GENMASK(h, l) << 16) | ((v) << (l)))
 /*
  *  the delay number of a window in different mode.
  */
@@ -38,6 +39,18 @@  enum vop2_scale_down_mode {
 	VOP2_SCALE_DOWN_AVG,
 };
 
+/*
+ * vop2 internal power domain id,
+ * should be all none zero, 0 will be treat as invalid;
+ */
+#define VOP2_PD_CLUSTER0	BIT(0)
+#define VOP2_PD_CLUSTER1	BIT(1)
+#define VOP2_PD_CLUSTER2	BIT(2)
+#define VOP2_PD_CLUSTER3	BIT(3)
+#define VOP2_PD_DSC_8K		BIT(5)
+#define VOP2_PD_DSC_4K		BIT(6)
+#define VOP2_PD_ESMART		BIT(7)
+
 enum vop2_win_regs {
 	VOP2_WIN_ENABLE,
 	VOP2_WIN_FORMAT,
@@ -192,6 +205,11 @@  enum dst_factor_mode {
 };
 
 #define RK3568_GRF_VO_CON1			0x0364
+
+#define RK3588_GRF_SOC_CON1			0x0304
+#define RK3588_GRF_VOP_CON2			0x08
+#define RK3588_GRF_VO1_CON0			0x00
+
 /* System registers definition */
 #define RK3568_REG_CFG_DONE			0x000
 #define RK3568_VERSION_INFO			0x004
@@ -200,6 +218,7 @@  enum dst_factor_mode {
 #define RK3568_DSP_IF_EN			0x028
 #define RK3568_DSP_IF_CTRL			0x02c
 #define RK3568_DSP_IF_POL			0x030
+#define RK3588_SYS_PD_CTRL			0x034
 #define RK3568_WB_CTRL				0x40
 #define RK3568_WB_XSCAL_FACTOR			0x44
 #define RK3568_WB_YRGB_MST			0x48
@@ -223,6 +242,7 @@  enum dst_factor_mode {
 #define RK3568_VP_DSP_CTRL			0x00
 #define RK3568_VP_MIPI_CTRL			0x04
 #define RK3568_VP_COLOR_BAR_CTRL		0x08
+#define RK3588_VP_CLK_CTRL			0x0C
 #define RK3568_VP_3D_LUT_CTRL			0x10
 #define RK3568_VP_3D_LUT_MST			0x20
 #define RK3568_VP_DSP_BG			0x2C
@@ -364,6 +384,9 @@  enum dst_factor_mode {
 #define RK3568_VP_DSP_CTRL__CORE_DCLK_DIV		BIT(4)
 #define RK3568_VP_DSP_CTRL__OUT_MODE			GENMASK(3, 0)
 
+#define RK3588_VP_CLK_CTRL__DCLK_OUT_DIV		GENMASK(3, 2)
+#define RK3588_VP_CLK_CTRL__DCLK_CORE_DIV		GENMASK(1, 0)
+
 #define RK3568_VP_POST_SCL_CTRL__VSCALEDOWN		BIT(1)
 #define RK3568_VP_POST_SCL_CTRL__HSCALEDOWN		BIT(0)
 
@@ -382,11 +405,37 @@  enum dst_factor_mode {
 #define RK3568_SYS_DSP_INFACE_EN_HDMI			BIT(1)
 #define RK3568_SYS_DSP_INFACE_EN_RGB			BIT(0)
 
+#define RK3588_SYS_DSP_INFACE_EN_MIPI1_MUX		GENMASK(22, 21)
+#define RK3588_SYS_DSP_INFACE_EN_MIPI0_MUX		GENMASK(20, 20)
+#define RK3588_SYS_DSP_INFACE_EN_EDP_HDMI1_MUX		GENMASK(19, 18)
+#define RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX		GENMASK(17, 16)
+#define RK3588_SYS_DSP_INFACE_EN_DP1_MUX		GENMASK(15, 14)
+#define RK3588_SYS_DSP_INFACE_EN_DP0_MUX		GENMASK(13, 12)
+#define RK3588_SYS_DSP_INFACE_EN_DPI			GENMASK(9, 8)
+#define RK3588_SYS_DSP_INFACE_EN_MIPI1			BIT(7)
+#define RK3588_SYS_DSP_INFACE_EN_MIPI0			BIT(6)
+#define RK3588_SYS_DSP_INFACE_EN_HDMI1			BIT(5)
+#define RK3588_SYS_DSP_INFACE_EN_EDP1			BIT(4)
+#define RK3588_SYS_DSP_INFACE_EN_HDMI0			BIT(3)
+#define RK3588_SYS_DSP_INFACE_EN_EDP0			BIT(2)
+#define RK3588_SYS_DSP_INFACE_EN_DP1			BIT(1)
+#define RK3588_SYS_DSP_INFACE_EN_DP0			BIT(0)
+
+#define RK3588_DSP_IF_MIPI1_PCLK_DIV			GENMASK(27, 26)
+#define RK3588_DSP_IF_MIPI0_PCLK_DIV			GENMASK(25, 24)
+#define RK3588_DSP_IF_EDP_HDMI1_PCLK_DIV		GENMASK(22, 22)
+#define RK3588_DSP_IF_EDP_HDMI1_DCLK_DIV		GENMASK(21, 20)
+#define RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV		GENMASK(18, 18)
+#define RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV		GENMASK(17, 16)
+
 #define RK3568_DSP_IF_POL__MIPI_PIN_POL			GENMASK(19, 16)
 #define RK3568_DSP_IF_POL__EDP_PIN_POL			GENMASK(15, 12)
 #define RK3568_DSP_IF_POL__HDMI_PIN_POL			GENMASK(7, 4)
 #define RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL		GENMASK(3, 0)
 
+#define RK3588_DSP_IF_POL__DP1_PIN_POL			GENMASK(14, 12)
+#define RK3588_DSP_IF_POL__DP0_PIN_POL			GENMASK(10, 8)
+
 #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2_PHASE_LOCK	BIT(5)
 #define RK3568_VP0_MIPI_CTRL__DCLK_DIV2			BIT(4)
 
@@ -407,8 +456,12 @@  enum dst_factor_mode {
 #define RK3568_OVL_PORT_SEL__SEL_PORT			GENMASK(31, 16)
 #define RK3568_OVL_PORT_SEL__SMART1			GENMASK(31, 30)
 #define RK3568_OVL_PORT_SEL__SMART0			GENMASK(29, 28)
+#define RK3588_OVL_PORT_SEL__ESMART3			GENMASK(31, 30)
+#define RK3588_OVL_PORT_SEL__ESMART2			GENMASK(29, 28)
 #define RK3568_OVL_PORT_SEL__ESMART1			GENMASK(27, 26)
 #define RK3568_OVL_PORT_SEL__ESMART0			GENMASK(25, 24)
+#define RK3588_OVL_PORT_SEL__CLUSTER3			GENMASK(23, 22)
+#define RK3588_OVL_PORT_SEL__CLUSTER2			GENMASK(21, 20)
 #define RK3568_OVL_PORT_SEL__CLUSTER1			GENMASK(19, 18)
 #define RK3568_OVL_PORT_SEL__CLUSTER0			GENMASK(17, 16)
 #define RK3568_OVL_PORT_SET__PORT2_MUX			GENMASK(11, 8)
@@ -421,6 +474,10 @@  enum dst_factor_mode {
 #define RK3568_CLUSTER_DLY_NUM__CLUSTER0_1		GENMASK(15, 8)
 #define RK3568_CLUSTER_DLY_NUM__CLUSTER0_0		GENMASK(7, 0)
 
+#define RK3568_CLUSTER_WIN_CTRL0__WIN0_EN		BIT(0)
+
+#define RK3568_SMART_REGION0_CTRL__WIN0_EN		BIT(0)
+
 #define RK3568_SMART_DLY_NUM__SMART1			GENMASK(31, 24)
 #define RK3568_SMART_DLY_NUM__SMART0			GENMASK(23, 16)
 #define RK3568_SMART_DLY_NUM__ESMART1			GENMASK(15, 8)
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
index 22288ad7f326..4745a9260cf8 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
@@ -34,6 +34,28 @@  static const uint32_t formats_cluster[] = {
 	DRM_FORMAT_Y210, /* yuv422_10bit non-Linear mode only */
 };
 
+static const uint32_t formats_esmart[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_NV12, /* yuv420_8bit linear mode, 2 plane */
+	DRM_FORMAT_NV21, /* yvu420_8bit linear mode, 2 plane */
+	DRM_FORMAT_NV16, /* yuv422_8bit linear mode, 2 plane */
+	DRM_FORMAT_NV61, /* yvu422_8bit linear mode, 2 plane */
+	DRM_FORMAT_NV24, /* yuv444_8bit linear mode, 2 plane */
+	DRM_FORMAT_NV42, /* yvu444_8bit linear mode, 2 plane */
+	DRM_FORMAT_NV15, /* yuv420_10bit linear mode, 2 plane, no padding */
+	DRM_FORMAT_YVYU, /* yuv422_8bit[YVYU] linear mode */
+	DRM_FORMAT_VYUY, /* yuv422_8bit[VYUY] linear mode */
+	DRM_FORMAT_YUYV, /* yuv422_8bit[YUYV] linear mode */
+	DRM_FORMAT_UYVY, /* yuv422_8bit[UYVY] linear mode */
+};
+
 static const uint32_t formats_rk356x_esmart[] = {
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
@@ -234,6 +256,186 @@  static const struct vop2_win_data rk3568_vop_win_data[] = {
 	},
 };
 
+static const struct vop2_video_port_data rk3588_vop_video_ports[] = {
+	{
+		.id = 0,
+		.feature = VOP_FEATURE_OUTPUT_10BIT,
+		.gamma_lut_len = 1024,
+		.cubic_lut_len = 9 * 9 * 9, /* 9x9x9 */
+		.max_output = { 4096, 2304 },
+		/* hdr2sdr sdr2hdr hdr2hdr sdr2sdr */
+		.pre_scan_max_dly = { 76, 65, 65, 54 },
+		.offset = 0xc00,
+	}, {
+		.id = 1,
+		.feature = VOP_FEATURE_OUTPUT_10BIT,
+		.gamma_lut_len = 1024,
+		.cubic_lut_len = 729, /* 9x9x9 */
+		.max_output = { 4096, 2304 },
+		.pre_scan_max_dly = { 76, 65, 65, 54 },
+		.offset = 0xd00,
+	}, {
+		.id = 2,
+		.feature = VOP_FEATURE_OUTPUT_10BIT,
+		.gamma_lut_len = 1024,
+		.cubic_lut_len = 17 * 17 * 17, /* 17x17x17 */
+		.max_output = { 4096, 2304 },
+		.pre_scan_max_dly = { 52, 52, 52, 52 },
+		.offset = 0xe00,
+	}, {
+		.id = 3,
+		.gamma_lut_len = 1024,
+		.max_output = { 2048, 1536 },
+		.pre_scan_max_dly = { 52, 52, 52, 52 },
+		.offset = 0xf00,
+	},
+};
+
+/*
+ * rk3588 vop with 4 cluster, 4 esmart win.
+ * Every cluster can work as 4K win or split into two win.
+ * All win in cluster support AFBCD.
+ *
+ * Every esmart win and smart win support 4 Multi-region.
+ *
+ * Scale filter mode:
+ *
+ * * Cluster:  bicubic for horizontal scale up, others use bilinear
+ * * ESmart:
+ *    * nearest-neighbor/bilinear/bicubic for scale up
+ *    * nearest-neighbor/bilinear/average for scale down
+ *
+ * AXI Read ID assignment:
+ * Two AXI bus:
+ * AXI0 is a read/write bus with a higher performance.
+ * AXI1 is a read only bus.
+ *
+ * Every window on a AXI bus must assigned two unique
+ * read id(yrgb_id/uv_id, valid id are 0x1~0xe).
+ *
+ * AXI0:
+ * Cluster0/1, Esmart0/1, WriteBack
+ *
+ * AXI 1:
+ * Cluster2/3, Esmart2/3
+ *
+ */
+static const struct vop2_win_data rk3588_vop_win_data[] = {
+	{
+		.name = "Cluster0-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER0,
+		.base = 0x1000,
+		.formats = formats_cluster,
+		.nformats = ARRAY_SIZE(formats_cluster),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 0,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 4, 26, 29 },
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	}, {
+		.name = "Cluster1-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER1,
+		.base = 0x1200,
+		.formats = formats_cluster,
+		.nformats = ARRAY_SIZE(formats_cluster),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 1,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 4, 26, 29 },
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	}, {
+		.name = "Cluster2-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER2,
+		.base = 0x1400,
+		.formats = formats_cluster,
+		.nformats = ARRAY_SIZE(formats_cluster),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 4,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 4, 26, 29 },
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	}, {
+		.name = "Cluster3-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER3,
+		.base = 0x1600,
+		.formats = formats_cluster,
+		.nformats = ARRAY_SIZE(formats_cluster),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 5,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+				       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 4, 26, 29 },
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	}, {
+		.name = "Esmart0-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART0,
+		.formats = formats_esmart,
+		.nformats = ARRAY_SIZE(formats_esmart),
+		.format_modifiers = format_modifiers,
+		.base = 0x1800,
+		.layer_sel_id = 2,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 23, 45, 48 },
+	}, {
+		.name = "Esmart1-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART1,
+		.formats = formats_esmart,
+		.nformats = ARRAY_SIZE(formats_esmart),
+		.format_modifiers = format_modifiers,
+		.base = 0x1a00,
+		.layer_sel_id = 3,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 23, 45, 48 },
+	}, {
+		.name = "Esmart2-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART2,
+		.base = 0x1c00,
+		.formats = formats_esmart,
+		.nformats = ARRAY_SIZE(formats_esmart),
+		.format_modifiers = format_modifiers,
+		.layer_sel_id = 6,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 23, 45, 48 },
+	}, {
+		.name = "Esmart3-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART3,
+		.formats = formats_esmart,
+		.nformats = ARRAY_SIZE(formats_esmart),
+		.format_modifiers = format_modifiers,
+		.base = 0x1e00,
+		.layer_sel_id = 7,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 23, 45, 48 },
+	},
+};
+
 static const struct vop2_data rk3566_vop = {
 	.nr_vps = 3,
 	.max_input = { 4096, 2304 },
@@ -254,6 +456,16 @@  static const struct vop2_data rk3568_vop = {
 	.soc_id = 3568,
 };
 
+static const struct vop2_data rk3588_vop = {
+	.nr_vps = 4,
+	.max_input = { 4096, 4320 },
+	.max_output = { 4096, 4320 },
+	.vp = rk3588_vop_video_ports,
+	.win = rk3588_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3588_vop_win_data),
+	.soc_id = 3588,
+};
+
 static const struct of_device_id vop2_dt_match[] = {
 	{
 		.compatible = "rockchip,rk3566-vop",
@@ -261,6 +473,9 @@  static const struct of_device_id vop2_dt_match[] = {
 	}, {
 		.compatible = "rockchip,rk3568-vop",
 		.data = &rk3568_vop,
+	}, {
+		.compatible = "rockchip,rk3588-vop",
+		.data = &rk3588_vop
 	}, {
 	},
 };
diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
index 6e66a802b96a..668f199df9f0 100644
--- a/include/dt-bindings/soc/rockchip,vop2.h
+++ b/include/dt-bindings/soc/rockchip,vop2.h
@@ -10,5 +10,9 @@ 
 #define ROCKCHIP_VOP2_EP_LVDS0	5
 #define ROCKCHIP_VOP2_EP_MIPI1	6
 #define ROCKCHIP_VOP2_EP_LVDS1	7
+#define ROCKCHIP_VOP2_EP_HDMI1	8
+#define ROCKCHIP_VOP2_EP_EDP1	9
+#define ROCKCHIP_VOP2_EP_DP0	10
+#define ROCKCHIP_VOP2_EP_DP1	11
 
 #endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */