diff mbox series

[v5,18/20] arm64: dts: exynos: google: Add initial Google gs101 SoC support

Message ID 20231201160925.3136868-19-peter.griffin@linaro.org (mailing list archive)
State Superseded
Headers show
Series Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board | expand

Commit Message

Peter Griffin Dec. 1, 2023, 4:09 p.m. UTC
Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6,
(oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile
phones. It features:
* 4xA55 little cluster
* 2xA76 Mid cluster
* 2xX1 Big cluster

This commit adds the basic device tree for gs101 (SoC).
Further platform support will be added over time.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 .../boot/dts/exynos/google/gs101-pinctrl.dtsi | 1250 +++++++++++++++++
 .../boot/dts/exynos/google/gs101-pinctrl.h    |   33 +
 arch/arm64/boot/dts/exynos/google/gs101.dtsi  |  476 +++++++
 3 files changed, 1759 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
 create mode 100644 arch/arm64/boot/dts/exynos/google/gs101.dtsi

Comments

William McVicker Dec. 2, 2023, 12:03 a.m. UTC | #1
On 12/01/2023, Peter Griffin wrote:
> Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6,
> (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile
> phones. It features:
> * 4xA55 little cluster
> * 2xA76 Mid cluster
> * 2xX1 Big cluster
> 
> This commit adds the basic device tree for gs101 (SoC).
> Further platform support will be added over time.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>

Tested-by: Will McVicker <willmcvicker@google.com>

--

Verified boot to a busybox console on my oriole device.

Thanks,
Will

> ---
>  .../boot/dts/exynos/google/gs101-pinctrl.dtsi | 1250 +++++++++++++++++
>  .../boot/dts/exynos/google/gs101-pinctrl.h    |   33 +
>  arch/arm64/boot/dts/exynos/google/gs101.dtsi  |  476 +++++++
>  3 files changed, 1759 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
>  create mode 100644 arch/arm64/boot/dts/exynos/google/gs101.dtsi
> 
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
> new file mode 100644
> index 000000000000..8c0f0cf75edb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
> @@ -0,0 +1,1250 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * GS101 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright 2019-2023 Google LLC
> + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
> + */
> +
> +#include "gs101-pinctrl.h"
> +
> +&pinctrl_gpio_alive {
> +	gpa0: gpa0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa1: gpa1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa2: gpa2-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa3: gpa3-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa4: gpa4-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa5: gpa5-gpio-bank  {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa9: gpa9-gpio-bank  {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa10: gpa10-gpio-bank  {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	uart15_bus: uart15-bus-pins {
> +		samsung,pins = "gpa2-3", "gpa2-4";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	uart16_bus: uart16-bus-pins {
> +		samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	uart17_bus: uart17-bus-pins {
> +		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi15_bus: spi15-bus-pins {
> +		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi15_cs: spi15-cs-pins {
> +		samsung,pins = "gpa4-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +};
> +
> +&pinctrl_far_alive {
> +	gpa6: gpa6-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa7: gpa7-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa8: gpa8-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +
> +	gpa11: gpa11-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
> +	};
> +};
> +
> +&pinctrl_gsacore {
> +	gps0: gps0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gps1: gps1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gps2: gps2-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};
> +
> +&pinctrl_gsactrl {
> +	gps3: gps3-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};
> +
> +&pinctrl_hsi1 {
> +	gph0: gph0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gph1: gph1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	pcie0_clkreq: pcie0-clkreq-pins{
> +		samsung,pins = "gph0-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
> +	};
> +
> +	pcie0_perst: pcie0-perst-pins {
> +		samsung,pins = "gph0-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +	};
> +};
> +
> +&pinctrl_hsi2 {
> +	gph2: gph2-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gph3: gph3-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gph4: gph4-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	sd2_clk: sd2-clk-pins {
> +		samsung,pins = "gph4-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +	};
> +
> +	sd2_cmd: sd2-cmd-pins {
> +		samsung,pins = "gph4-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +	};
> +
> +	sd2_bus1: sd2-bus-width1-pins {
> +		samsung,pins = "gph4-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +	};
> +
> +	sd2_bus4: sd2-bus-width4-pins {
> +		samsung,pins = "gph4-3", "gph4-4", "gph4-5";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +	};
> +
> +	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
> +		samsung,pins = "gph4-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
> +		samsung,pins = "gph4-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
> +		samsung,pins = "gph4-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +	};
> +
> +	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
> +		samsung,pins = "gph4-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +	};
> +
> +	ufs_rst_n: ufs-rst-n-pins {
> +		samsung,pins = "gph3-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	ufs_refclk_out: ufs-refclk-out-pins {
> +		samsung,pins = "gph3-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	pcie1_clkreq: pcie1-clkreq-pins {
> +		samsung,pins = "gph2-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
> +	};
> +
> +	pcie1_perst: pcie1-perst-pins {
> +		samsung,pins = "gph2-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +	};
> +};
> +
> +&pinctrl_peric0 {
> +	gpp0: gpp0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp1: gpp1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp2: gpp2-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp3: gpp3-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp4: gpp4-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp5: gpp5-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp6: gpp6-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp7: gpp7-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp8: gpp8-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp9: gpp9-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp10: gpp10-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp11: gpp11-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp12: gpp12-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp13: gpp13-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp14: gpp14-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp15: gpp15-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp16: gpp16-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp17: gpp17-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp18: gpp18-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp19: gpp19-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	/* USI_PERIC0_UART_DBG */
> +	uart0_bus: uart0-bus-pins {
> +		samsung,pins = "gpp1-2", "gpp1-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	disp_te_pri_on: disp-te-pri-on-pins {
> +		samsung,pins = "gpp0-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> +	};
> +
> +	disp_te_pri_off: disp-te-pri-off-pins {
> +		samsung,pins = "gpp0-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
> +	};
> +
> +	disp_te_sec_on: disp-te-sec-on-pins {
> +		samsung,pins = "gpp0-4";
> +		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> +	};
> +
> +	disp_te_sec_off: disp-te-sec-off-pins {
> +		samsung,pins = "gpp0-4";
> +		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
> +	};
> +
> +	sensor_mclk1_out: sensor-mclk1-out-pins {
> +		samsung,pins = "gpp3-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk1_fn: sensor-mclk1-fn-pins {
> +		samsung,pins = "gpp3-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk2_out: sensor-mclk2-out-pins {
> +		samsung,pins = "gpp5-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk2_fn: sensor-mclk2-fn-pins {
> +		samsung,pins = "gpp5-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk3_out: sensor-mclk3-out-pins {
> +		samsung,pins = "gpp7-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk3_fn: sensor-mclk3-fn-pins {
> +		samsung,pins = "gpp7-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk4_out: sensor-mclk4-out-pins {
> +		samsung,pins = "gpp9-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk4_fn: sensor-mclk4-fn-pins {
> +		samsung,pins = "gpp9-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk5_out: sensor-mclk5-out-pins {
> +		samsung,pins = "gpp11-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk5_fn: sensor-mclk5-fn-pins {
> +		samsung,pins = "gpp11-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk6_out: sensor-mclk6-out-pins {
> +		samsung,pins = "gpp13-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk6_fn: sensor-mclk6-fn-pins {
> +		samsung,pins = "gpp13-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk7_out: sensor-mclk7-out-pins {
> +		samsung,pins = "gpp15-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk7_fn: sensor-mclk7-fn-pins {
> +		samsung,pins = "gpp15-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk8_out: sensor-mclk8-out-pins {
> +		samsung,pins = "gpp17-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	sensor_mclk8_fn: sensor-mclk8-fn-pins {
> +		samsung,pins = "gpp17-0";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +	};
> +
> +	hsi2c14_bus: hsi2c14-bus-pins {
> +		samsung,pins = "gpp18-0", "gpp18-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart14_bus_single: uart14-bus-pins {
> +		samsung,pins = "gpp18-0", "gpp18-1",
> +			       "gpp18-2", "gpp18-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi14_bus: spi14-bus-pins {
> +		samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi14_cs: spi14-cs-pins {
> +		samsung,pins = "gpp18-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi14_cs_func: spi14-cs-func-pins {
> +		samsung,pins = "gpp18-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c8_bus: hsi2c8-bus-pins {
> +		samsung,pins = "gpp16-0", "gpp16-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +		samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
> +	};
> +
> +	uart8_bus_single: uart8-bus-pins {
> +		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
> +			       "gpp16-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi8_bus: spi8-bus-pins {
> +		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi8_cs: spi8-cs-pins {
> +		samsung,pins = "gpp16-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi8_cs_func: spi8-cs-func-pins {
> +		samsung,pins = "gpp16-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c7_bus: hsi2c7-bus-pins {
> +		samsung,pins = "gpp14-0", "gpp14-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart7_bus_single: uart7-bus-pins {
> +		samsung,pins = "gpp14-0", "gpp14-1",
> +			       "gpp14-2", "gpp14-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi7_bus: spi7-bus-pins {
> +		samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi7_cs: spi7-cs-pins {
> +		samsung,pins = "gpp14-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi7_cs_func: spi7-cs-func-pins {
> +		samsung,pins = "gpp14-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c6_bus: hsi2c6-bus-pins {
> +		samsung,pins = "gpp12-0", "gpp12-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart6_bus_single: uart6-bus-pins {
> +		samsung,pins = "gpp12-0", "gpp12-1",
> +			       "gpp12-2", "gpp12-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi6_bus: spi6-bus-pins {
> +		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi6_cs: spi6-cs-pins {
> +		samsung,pins = "gpp12-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi6_cs_func: spi6-cs-func-pins {
> +		samsung,pins = "gpp12-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c5_bus: hsi2c5-bus-pins {
> +		samsung,pins = "gpp10-0", "gpp10-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart5_bus_single: uart5-bus-pins {
> +		samsung,pins = "gpp10-0", "gpp10-1",
> +			       "gpp10-2", "gpp10-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi5_bus: spi5-bus-pins {
> +		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi5_cs_func: spi5-cs-func-pins {
> +		samsung,pins = "gpp10-3";
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	hsi2c4_bus: hsi2c4-bus-pins {
> +		samsung,pins = "gpp8-0", "gpp8-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart4_bus_single: uart4-bus-pins {
> +		samsung,pins = "gpp8-0", "gpp8-1",
> +			       "gpp8-2", "gpp8-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi4_bus: spi4-bus-pins {
> +		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi4_cs: spi4-cs-pins {
> +		samsung,pins = "gpp8-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi4_cs_func: spi4-cs-func-pins {
> +		samsung,pins = "gpp8-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c3_bus: hsi2c3-bus-pins {
> +		samsung,pins = "gpp6-0", "gpp6-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart3_bus_single: uart3-bus-pins {
> +		samsung,pins = "gpp6-0", "gpp6-1",
> +			       "gpp6-2", "gpp6-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi3_bus: spi3-bus-pins {
> +		samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi3_cs: spi3-cs-pins {
> +		samsung,pins = "gpp6-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi3_cs_func: spi3-cs-func-pins {
> +		samsung,pins = "gpp6-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c2_bus: hsi2c2-bus-pins {
> +		samsung,pins = "gpp4-0", "gpp4-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart2_bus_single: uart2-bus-pins {
> +		samsung,pins = "gpp4-0", "gpp4-1",
> +			       "gpp4-2", "gpp4-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi2_bus: spi2-bus-pins {
> +		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi2_cs: spi2-cs-pins {
> +		samsung,pins = "gpp4-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi2_cs_func: spi2-cs-func-pins {
> +		samsung,pins = "gpp4-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c1_bus: hsi2c1-bus-pins {
> +		samsung,pins = "gpp2-0", "gpp2-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart1_bus_single: uart1-bus-pins {
> +		samsung,pins = "gpp2-0", "gpp2-1",
> +			       "gpp2-2", "gpp2-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi1_bus: spi1-bus-pins {
> +		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi1_cs: spi1-cs-pins {
> +		samsung,pins = "gpp2-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi1_cs_func: spi1-cs-func-pins {
> +		samsung,pins = "gpp2-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +};
> +
> +&pinctrl_peric1 {
> +	gpp20: gpp20-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp21: gpp21-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp22: gpp22-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp23: gpp23-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp24: gpp24-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp25: gpp25-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp26: gpp26-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpp27: gpp27-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	hsi2c13_bus: hsi2c13-bus-pins  {
> +		samsung,pins = "gpp25-0", "gpp25-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart13_bus_single: uart13-bus-pins {
> +		samsung,pins = "gpp25-0", "gpp25-1",
> +			       "gpp25-2", "gpp25-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi13_bus: spi13-bus-pins {
> +		samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi13_cs: spi13-cs-pins {
> +		samsung,pins = "gpp25-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi13_cs_func: spi13-cs-func-pins {
> +		samsung,pins = "gpp25-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c12_bus: hsi2c12-bus-pins {
> +		samsung,pins = "gpp23-4", "gpp23-5";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart12_bus_single: uart12-bus-pins {
> +		samsung,pins = "gpp23-4", "gpp23-5",
> +			       "gpp23-6", "gpp23-7";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi12_bus: spi12-bus-pins {
> +		samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi14_cs2: spi14-cs2-pins {
> +		samsung,pins = "gpp23-6";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi12_cs: spi12-cs-pins {
> +		samsung,pins = "gpp23-7";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi12_cs_func: spi12-cs-func-pins {
> +		samsung,pins = "gpp23-7";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c11_bus: hsi2c11-bus-pins {
> +		samsung,pins = "gpp23-0", "gpp23-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart11_bus_single: uart11-bus-pins {
> +		samsung,pins = "gpp23-0", "gpp23-1",
> +			       "gpp23-2", "gpp23-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi11_bus: spi11-bus-pins {
> +		samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi11_cs: spi11-cs-pins {
> +		samsung,pins = "gpp23-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi11_cs_func: spi11-cs-func-pins {
> +		samsung,pins = "gpp23-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c10_bus: hsi2c10-bus-pins {
> +		samsung,pins = "gpp21-0", "gpp21-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart10_bus_single: uart10-bus-pins {
> +		samsung,pins = "gpp21-0", "gpp21-1",
> +			       "gpp21-2", "gpp21-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi10_bus: spi10-bus-pins {
> +		samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi10_cs: spi10-cs-pins {
> +		samsung,pins = "gpp21-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi10_cs_func: spi10-cs-func-pins {
> +		samsung,pins = "gpp21-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c9_bus: hsi2c9-bus-pins {
> +		samsung,pins = "gpp20-4", "gpp20-5";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart9_bus_single: uart9-bus-pins {
> +		samsung,pins = "gpp20-4", "gpp20-5",
> +			       "gpp20-6", "gpp20-7";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi9_bus: spi9-bus-pins {
> +		samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi9_cs: spi9-cs-pins {
> +		samsung,pins = "gpp20-7";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi9_cs_func: spi9-cs-func-pins {
> +		samsung,pins = "gpp20-7";
> +		samsung,pin-function = <GS101_PIN_FUNC_2>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	hsi2c0_bus: hsi2c0-bus-pins {
> +		samsung,pins = "gpp20-0", "gpp20-1";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	uart0_bus_single: uart0-bus-pins {
> +		samsung,pins = "gpp20-0", "gpp20-1",
> +			       "gpp20-2", "gpp20-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +	};
> +
> +	spi0_bus: spi0-bus-pins {
> +		samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi0_cs: spi0-cs-pins {
> +		samsung,pins = "gpp20-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	spi0_cs_func: spi0-cs-func-pins {
> +		samsung,pins = "gpp20-3";
> +		samsung,pin-function = <GS101_PIN_FUNC_3>;
> +		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +};
> +
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
> new file mode 100644
> index 000000000000..853505e45b60
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Pinctrl binding constants for GS101
> + *
> + * Copyright (c) 2020-2023 Google, LLC.
> + */
> +
> +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__
> +#define __DT_BINDINGS_PINCTRL_GS101_H__
> +
> +#define GS101_PIN_PULL_NONE		0
> +#define GS101_PIN_PULL_DOWN		1
> +#define GS101_PIN_PULL_UP		3
> +
> +/* Pin function in power down mode */
> +#define GS101_PIN_PDN_OUT0		0
> +#define GS101_PIN_PDN_OUT1		1
> +#define GS101_PIN_PDN_INPUT		2
> +#define GS101_PIN_PDN_PREV		3
> +
> +/* GS101 drive strengths */
> +#define GS101_PIN_DRV_2_5_MA		0
> +#define GS101_PIN_DRV_5_MA		1
> +#define GS101_PIN_DRV_7_5_MA		2
> +#define GS101_PIN_DRV_10_MA		3
> +
> +#define GS101_PIN_FUNC_INPUT		0
> +#define GS101_PIN_FUNC_OUTPUT		1
> +#define GS101_PIN_FUNC_2		2
> +#define GS101_PIN_FUNC_3		3
> +#define GS101_PIN_FUNC_EINT		0xf
> +
> +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> new file mode 100644
> index 000000000000..40f6654a23f2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -0,0 +1,476 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * GS101 SoC
> + *
> + * Copyright 2019-2023 Google LLC
> + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
> + */
> +
> +#include <dt-bindings/clock/google,gs101.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/samsung,exynos-usi.h>
> +
> +/ {
> +	compatible = "google,gs101";
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		pinctrl0 = &pinctrl_gpio_alive;
> +		pinctrl1 = &pinctrl_far_alive;
> +		pinctrl2 = &pinctrl_gsacore;
> +		pinctrl3 = &pinctrl_gsactrl;
> +		pinctrl4 = &pinctrl_peric0;
> +		pinctrl5 = &pinctrl_peric1;
> +		pinctrl6 = &pinctrl_hsi1;
> +		pinctrl7 = &pinctrl_hsi2;
> +		serial0 = &serial_0;
> +	};
> +
> +	pmu-0 {
> +		compatible = "arm,cortex-a55-pmu";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
> +	};
> +
> +	pmu-1 {
> +		compatible = "arm,cortex-a76-pmu";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
> +	};
> +
> +	pmu-2 {
> +		compatible = "arm,cortex-x1-pmu";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
> +	};
> +
> +	pmu-3 {
> +		compatible = "arm,dsu-pmu";
> +		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
> +		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
> +		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
> +	};
> +
> +	/* TODO replace with CCF clock */
> +	dummy_clk: oscillator {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12345>;
> +		clock-output-names = "pclk";
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&cpu4>;
> +				};
> +				core1 {
> +					cpu = <&cpu5>;
> +				};
> +			};
> +
> +			cluster2 {
> +				core0 {
> +					cpu = <&cpu6>;
> +				};
> +				core1 {
> +					cpu = <&cpu7>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0000>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +			capacity-dmips-mhz = <250>;
> +			dynamic-power-coefficient = <70>;
> +		};
> +
> +		cpu1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0100>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +			capacity-dmips-mhz = <250>;
> +			dynamic-power-coefficient = <70>;
> +		};
> +
> +		cpu2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0200>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +			capacity-dmips-mhz = <250>;
> +			dynamic-power-coefficient = <70>;
> +		};
> +
> +		cpu3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0300>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +			capacity-dmips-mhz = <250>;
> +			dynamic-power-coefficient = <70>;
> +		};
> +
> +		cpu4: cpu@400 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a76";
> +			reg = <0x0400>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
> +			capacity-dmips-mhz = <620>;
> +			dynamic-power-coefficient = <284>;
> +		};
> +
> +		cpu5: cpu@500 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a76";
> +			reg = <0x0500>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
> +			capacity-dmips-mhz = <620>;
> +			dynamic-power-coefficient = <284>;
> +		};
> +
> +		cpu6: cpu@600 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-x1";
> +			reg = <0x0600>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&HERA_CPU_SLEEP>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <650>;
> +		};
> +
> +		cpu7: cpu@700 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-x1";
> +			reg = <0x0700>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&HERA_CPU_SLEEP>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <650>;
> +		};
> +
> +		idle-states {
> +			entry-method = "psci";
> +
> +			ANANKE_CPU_SLEEP: cpu-ananke-sleep {
> +				idle-state-name = "c2";
> +				compatible = "arm,idle-state";
> +				arm,psci-suspend-param = <0x0010000>;
> +				entry-latency-us = <70>;
> +				exit-latency-us = <160>;
> +				min-residency-us = <2000>;
> +			};
> +
> +			ENYO_CPU_SLEEP: cpu-enyo-sleep {
> +				idle-state-name = "c2";
> +				compatible = "arm,idle-state";
> +				arm,psci-suspend-param = <0x0010000>;
> +				entry-latency-us = <150>;
> +				exit-latency-us = <190>;
> +				min-residency-us = <2500>;
> +			};
> +
> +			HERA_CPU_SLEEP: cpu-hera-sleep {
> +				idle-state-name = "c2";
> +				compatible = "arm,idle-state";
> +				arm,psci-suspend-param = <0x0010000>;
> +				entry-latency-us = <235>;
> +				exit-latency-us = <220>;
> +				min-residency-us = <3500>;
> +			};
> +		};
> +	};
> +
> +	/* ect node is required to be present by bootloader */
> +	ect {
> +	};
> +
> +	ext_24_5m: clock-1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-output-names = "oscclk";
> +	};
> +
> +	ext_200m: clock-2 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-output-names = "ext-200m";
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		gsa_reserved_protected: gsa@90200000 {
> +			reg = <0x0 0x90200000 0x400000>;
> +			no-map;
> +		};
> +
> +		tpu_fw_reserved: tpu-fw@93000000 {
> +			reg = <0x0 0x93000000 0x1000000>;
> +			no-map;
> +		};
> +
> +		aoc_reserve: aoc@94000000 {
> +			reg = <0x0 0x94000000 0x03000000>;
> +			no-map;
> +		};
> +
> +		abl_reserved: abl@f8800000 {
> +			reg = <0x0 0xf8800000 0x02000000>;
> +			no-map;
> +		};
> +
> +		dss_log_reserved: dss-log-reserved@fd3f0000 {
> +			reg = <0x0 0xfd3f0000 0x0000e000>;
> +			no-map;
> +		};
> +
> +		debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
> +			reg = <0x0 0xfd3fe000 0x00001000>;
> +			no-map;
> +		};
> +
> +		bldr_log_reserved: bldr-log-reserved@fd800000 {
> +			reg = <0x0 0xfd800000 0x00100000>;
> +			no-map;
> +		};
> +
> +		bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
> +			reg = <0x0 0xfd900000 0x00002000>;
> +			no-map;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts =
> +		   <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> +		   <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> +		   <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> +		   <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
> +		clock-frequency = <24576000>;
> +	};
> +
> +	soc: soc@0 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0x0 0x40000000>;
> +
> +		cmu_misc: clock-controller@10010000 {
> +			compatible = "google,gs101-cmu-misc";
> +			reg = <0x10010000 0x8000>;
> +			#clock-cells = <1>;
> +			clocks =  <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>;
> +			clock-names = "oscclk", "dout_cmu_misc_bus";
> +		};
> +
> +		watchdog_cl0: watchdog@10060000 {
> +			compatible = "google,gs101-wdt";
> +			reg = <0x10060000 0x100>;
> +			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks =
> +			  <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_IPCLKPORT_PCLK>,
> +			  <&ext_24_5m>;
> +			clock-names = "watchdog", "watchdog_src";
> +			samsung,syscon-phandle = <&pmu_system_controller>;
> +			samsung,cluster-index = <0>;
> +			status = "disabled";
> +		};
> +
> +		watchdog_cl1: watchdog@10070000 {
> +			compatible = "google,gs101-wdt";
> +			reg = <0x10070000 0x100>;
> +			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks =
> +			  <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_IPCLKPORT_PCLK>,
> +			  <&ext_24_5m>;
> +			clock-names = "watchdog", "watchdog_src";
> +			samsung,syscon-phandle = <&pmu_system_controller>;
> +			samsung,cluster-index = <1>;
> +			status = "disabled";
> +		};
> +
> +		gic: interrupt-controller@10400000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <4>;
> +			interrupt-controller;
> +			reg = <0x10400000 0x10000>, /* GICD */
> +			      <0x10440000 0x100000>;/* GICR * 8 */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> +			ppi-partitions {
> +				ppi_cluster0: interrupt-partition-0 {
> +					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
> +				};
> +
> +				ppi_cluster1: interrupt-partition-1 {
> +					affinity = <&cpu4 &cpu5>;
> +				};
> +
> +				ppi_cluster2: interrupt-partition-2 {
> +					affinity = <&cpu6 &cpu7>;
> +				};
> +			};
> +		};
> +
> +		sysreg_peric0: syscon@10820000 {
> +			compatible = "google,gs101-peric0-sysreg", "syscon";
> +			reg = <0x10820000 0x10000>;
> +		};
> +
> +		pinctrl_peric0: pinctrl@10840000 {
> +			compatible = "google,gs101-pinctrl";
> +			reg = <0x10840000 0x00001000>;
> +			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
> +		};
> +
> +		usi_uart: usi@10a000c0 {
> +			compatible = "google,gs101-usi",
> +				     "samsung,exynos850-usi";
> +			reg = <0x10a000c0 0x20>;
> +			samsung,sysreg = <&sysreg_peric0 0x1020>;
> +			samsung,mode = <USI_V2_UART>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			clocks = <&dummy_clk>, <&dummy_clk>;
> +			clock-names = "pclk", "ipclk";
> +			status = "disabled";
> +
> +			serial_0: serial@10a00000 {
> +				compatible = "google,gs101-uart";
> +				reg = <0x10a00000 0xc0>;
> +				reg-io-width = <4>;
> +				samsung,uart-fifosize = <256>;
> +				interrupts = <GIC_SPI 634
> +					      IRQ_TYPE_LEVEL_HIGH 0>;
> +				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
> +				clock-names = "uart", "clk_uart_baud0";
> +				status = "disabled";
> +			};
> +		};
> +
> +		pinctrl_peric1: pinctrl@10c40000 {
> +			compatible = "google,gs101-pinctrl";
> +			reg = <0x10C40000 0x00001000>;
> +			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
> +		};
> +
> +		sysreg_peric1: syscon@10c20000 {
> +			compatible = "google,gs101-peric1-sysreg", "syscon";
> +			reg = <0x10C20000 0x10000>;
> +		};
> +
> +		pinctrl_hsi1: pinctrl@11840000 {
> +			compatible = "google,gs101-pinctrl";
> +			reg = <0x11840000 0x00001000>;
> +			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
> +		};
> +
> +		pinctrl_hsi2: pinctrl@14440000 {
> +			compatible = "google,gs101-pinctrl";
> +			reg = <0x14440000 0x00001000>;
> +			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
> +		};
> +
> +		cmu_apm: clock-controller@17400000 {
> +			compatible = "google,gs101-cmu-apm";
> +			reg = <0x17400000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&ext_24_5m>;
> +			clock-names = "oscclk";
> +		};
> +
> +		sysreg_apm: syscon@174204e0 {
> +			compatible = "google,gs101-apm-sysreg", "syscon";
> +			reg = <0x174204e0 0x1000>;
> +		};
> +
> +		pmu_system_controller: system-controller@17460000 {
> +			compatible = "google,gs101-pmu", "syscon";
> +			reg = <0x17460000 0x10000>;
> +		};
> +
> +		pinctrl_gpio_alive: pinctrl@174d0000 {
> +			compatible = "google,gs101-pinctrl";
> +			reg = <0x174d0000 0x00001000>;
> +
> +			wakeup-interrupt-controller {
> +				compatible = "google,gs101-wakeup-eint",
> +					     "samsung,exynos850-wakeup-eint",
> +					     "samsung,exynos7-wakeup-eint";
> +			};
> +		};
> +
> +		pinctrl_far_alive: pinctrl@174e0000 {
> +			compatible = "google,gs101-pinctrl";
> +			reg = <0x174e0000 0x00001000>;
> +
> +			wakeup-interrupt-controller {
> +				compatible = "google,gs101-wakeup-eint",
> +					     "samsung,exynos850-wakeup-eint",
> +					     "samsung,exynos7-wakeup-eint";
> +			};
> +		};
> +
> +		pinctrl_gsactrl: pinctrl@17940000 {
> +			compatible = "google,gs101-pinctrl";
> +			reg = <0x17940000 0x00001000>;
> +		};
> +
> +		pinctrl_gsacore: pinctrl@17a80000 {
> +			compatible = "google,gs101-pinctrl";
> +			reg = <0x17a80000 0x00001000>;
> +		};
> +
> +		cmu_top: clock-controller@1e080000 {
> +			compatible = "google,gs101-cmu-top";
> +			reg = <0x1e080000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&ext_24_5m>;
> +			clock-names = "oscclk";
> +		};
> +	};
> +};
> +
> +#include "gs101-pinctrl.dtsi"
> -- 
> 2.43.0.rc2.451.g8631bc7472-goog
> 
> -- 
> To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.
>
Sam Protsenko Dec. 2, 2023, 1:54 a.m. UTC | #2
On Fri, Dec 1, 2023 at 10:11 AM Peter Griffin <peter.griffin@linaro.org> wrote:
>
> Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6,
> (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile
> phones. It features:
> * 4xA55 little cluster
> * 2xA76 Mid cluster
> * 2xX1 Big cluster
>
> This commit adds the basic device tree for gs101 (SoC).
> Further platform support will be added over time.
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  .../boot/dts/exynos/google/gs101-pinctrl.dtsi | 1250 +++++++++++++++++
>  .../boot/dts/exynos/google/gs101-pinctrl.h    |   33 +
>  arch/arm64/boot/dts/exynos/google/gs101.dtsi  |  476 +++++++
>  3 files changed, 1759 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
>  create mode 100644 arch/arm64/boot/dts/exynos/google/gs101.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
> new file mode 100644
> index 000000000000..8c0f0cf75edb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
> @@ -0,0 +1,1250 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * GS101 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright 2019-2023 Google LLC
> + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
> + */
> +
> +#include "gs101-pinctrl.h"
> +
> +&pinctrl_gpio_alive {
> +       gpa0: gpa0-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa1: gpa1-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa2: gpa2-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa3: gpa3-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa4: gpa4-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa5: gpa5-gpio-bank  {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa9: gpa9-gpio-bank  {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa10: gpa10-gpio-bank  {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       uart15_bus: uart15-bus-pins {
> +               samsung,pins = "gpa2-3", "gpa2-4";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       uart16_bus: uart16-bus-pins {
> +               samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       uart17_bus: uart17-bus-pins {
> +               samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi15_bus: spi15-bus-pins {
> +               samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi15_cs: spi15-cs-pins {
> +               samsung,pins = "gpa4-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +};
> +
> +&pinctrl_far_alive {
> +       gpa6: gpa6-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa7: gpa7-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa8: gpa8-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +
> +       gpa11: gpa11-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
> +       };
> +};
> +
> +&pinctrl_gsacore {
> +       gps0: gps0-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gps1: gps1-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gps2: gps2-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +};
> +
> +&pinctrl_gsactrl {
> +       gps3: gps3-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +};
> +
> +&pinctrl_hsi1 {
> +       gph0: gph0-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gph1: gph1-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       pcie0_clkreq: pcie0-clkreq-pins{
> +               samsung,pins = "gph0-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +               samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +               samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +               samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
> +       };
> +
> +       pcie0_perst: pcie0-perst-pins {
> +               samsung,pins = "gph0-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +               samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +       };
> +};
> +
> +&pinctrl_hsi2 {
> +       gph2: gph2-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gph3: gph3-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gph4: gph4-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       sd2_clk: sd2-clk-pins {
> +               samsung,pins = "gph4-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +       };
> +
> +       sd2_cmd: sd2-cmd-pins {
> +               samsung,pins = "gph4-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +               samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +       };
> +
> +       sd2_bus1: sd2-bus-width1-pins {
> +               samsung,pins = "gph4-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +               samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +       };
> +
> +       sd2_bus4: sd2-bus-width4-pins {
> +               samsung,pins = "gph4-3", "gph4-4", "gph4-5";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +               samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +       };
> +
> +       sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
> +               samsung,pins = "gph4-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
> +               samsung,pins = "gph4-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
> +               samsung,pins = "gph4-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> +       };
> +
> +       sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
> +               samsung,pins = "gph4-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +       };
> +
> +       ufs_rst_n: ufs-rst-n-pins {
> +               samsung,pins = "gph3-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +               samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       ufs_refclk_out: ufs-refclk-out-pins {
> +               samsung,pins = "gph3-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +               samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       pcie1_clkreq: pcie1-clkreq-pins {
> +               samsung,pins = "gph2-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_UP>;
> +               samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +               samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +               samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
> +       };
> +
> +       pcie1_perst: pcie1-perst-pins {
> +               samsung,pins = "gph2-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> +               samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +       };
> +};
> +
> +&pinctrl_peric0 {
> +       gpp0: gpp0-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp1: gpp1-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp2: gpp2-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp3: gpp3-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp4: gpp4-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp5: gpp5-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp6: gpp6-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp7: gpp7-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp8: gpp8-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp9: gpp9-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp10: gpp10-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp11: gpp11-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp12: gpp12-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp13: gpp13-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp14: gpp14-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp15: gpp15-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp16: gpp16-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp17: gpp17-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp18: gpp18-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp19: gpp19-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       /* USI_PERIC0_UART_DBG */
> +       uart0_bus: uart0-bus-pins {
> +               samsung,pins = "gpp1-2", "gpp1-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       disp_te_pri_on: disp-te-pri-on-pins {
> +               samsung,pins = "gpp0-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> +       };
> +
> +       disp_te_pri_off: disp-te-pri-off-pins {
> +               samsung,pins = "gpp0-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
> +       };
> +
> +       disp_te_sec_on: disp-te-sec-on-pins {
> +               samsung,pins = "gpp0-4";
> +               samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> +       };
> +
> +       disp_te_sec_off: disp-te-sec-off-pins {
> +               samsung,pins = "gpp0-4";
> +               samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
> +       };
> +
> +       sensor_mclk1_out: sensor-mclk1-out-pins {
> +               samsung,pins = "gpp3-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk1_fn: sensor-mclk1-fn-pins {
> +               samsung,pins = "gpp3-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk2_out: sensor-mclk2-out-pins {
> +               samsung,pins = "gpp5-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk2_fn: sensor-mclk2-fn-pins {
> +               samsung,pins = "gpp5-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk3_out: sensor-mclk3-out-pins {
> +               samsung,pins = "gpp7-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk3_fn: sensor-mclk3-fn-pins {
> +               samsung,pins = "gpp7-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk4_out: sensor-mclk4-out-pins {
> +               samsung,pins = "gpp9-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk4_fn: sensor-mclk4-fn-pins {
> +               samsung,pins = "gpp9-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk5_out: sensor-mclk5-out-pins {
> +               samsung,pins = "gpp11-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk5_fn: sensor-mclk5-fn-pins {
> +               samsung,pins = "gpp11-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk6_out: sensor-mclk6-out-pins {
> +               samsung,pins = "gpp13-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk6_fn: sensor-mclk6-fn-pins {
> +               samsung,pins = "gpp13-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk7_out: sensor-mclk7-out-pins {
> +               samsung,pins = "gpp15-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk7_fn: sensor-mclk7-fn-pins {
> +               samsung,pins = "gpp15-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk8_out: sensor-mclk8-out-pins {
> +               samsung,pins = "gpp17-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       sensor_mclk8_fn: sensor-mclk8-fn-pins {
> +               samsung,pins = "gpp17-0";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> +       };
> +
> +       hsi2c14_bus: hsi2c14-bus-pins {
> +               samsung,pins = "gpp18-0", "gpp18-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart14_bus_single: uart14-bus-pins {
> +               samsung,pins = "gpp18-0", "gpp18-1",
> +                              "gpp18-2", "gpp18-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi14_bus: spi14-bus-pins {
> +               samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi14_cs: spi14-cs-pins {
> +               samsung,pins = "gpp18-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi14_cs_func: spi14-cs-func-pins {
> +               samsung,pins = "gpp18-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c8_bus: hsi2c8-bus-pins {
> +               samsung,pins = "gpp16-0", "gpp16-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +               samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
> +       };
> +
> +       uart8_bus_single: uart8-bus-pins {
> +               samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
> +                              "gpp16-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi8_bus: spi8-bus-pins {
> +               samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi8_cs: spi8-cs-pins {
> +               samsung,pins = "gpp16-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi8_cs_func: spi8-cs-func-pins {
> +               samsung,pins = "gpp16-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c7_bus: hsi2c7-bus-pins {
> +               samsung,pins = "gpp14-0", "gpp14-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart7_bus_single: uart7-bus-pins {
> +               samsung,pins = "gpp14-0", "gpp14-1",
> +                              "gpp14-2", "gpp14-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi7_bus: spi7-bus-pins {
> +               samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi7_cs: spi7-cs-pins {
> +               samsung,pins = "gpp14-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi7_cs_func: spi7-cs-func-pins {
> +               samsung,pins = "gpp14-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c6_bus: hsi2c6-bus-pins {
> +               samsung,pins = "gpp12-0", "gpp12-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart6_bus_single: uart6-bus-pins {
> +               samsung,pins = "gpp12-0", "gpp12-1",
> +                              "gpp12-2", "gpp12-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi6_bus: spi6-bus-pins {
> +               samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi6_cs: spi6-cs-pins {
> +               samsung,pins = "gpp12-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi6_cs_func: spi6-cs-func-pins {
> +               samsung,pins = "gpp12-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c5_bus: hsi2c5-bus-pins {
> +               samsung,pins = "gpp10-0", "gpp10-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart5_bus_single: uart5-bus-pins {
> +               samsung,pins = "gpp10-0", "gpp10-1",
> +                              "gpp10-2", "gpp10-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi5_bus: spi5-bus-pins {
> +               samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +               samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi5_cs_func: spi5-cs-func-pins {
> +               samsung,pins = "gpp10-3";
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> +               samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       hsi2c4_bus: hsi2c4-bus-pins {
> +               samsung,pins = "gpp8-0", "gpp8-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart4_bus_single: uart4-bus-pins {
> +               samsung,pins = "gpp8-0", "gpp8-1",
> +                              "gpp8-2", "gpp8-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi4_bus: spi4-bus-pins {
> +               samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi4_cs: spi4-cs-pins {
> +               samsung,pins = "gpp8-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi4_cs_func: spi4-cs-func-pins {
> +               samsung,pins = "gpp8-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c3_bus: hsi2c3-bus-pins {
> +               samsung,pins = "gpp6-0", "gpp6-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart3_bus_single: uart3-bus-pins {
> +               samsung,pins = "gpp6-0", "gpp6-1",
> +                              "gpp6-2", "gpp6-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi3_bus: spi3-bus-pins {
> +               samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi3_cs: spi3-cs-pins {
> +               samsung,pins = "gpp6-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi3_cs_func: spi3-cs-func-pins {
> +               samsung,pins = "gpp6-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c2_bus: hsi2c2-bus-pins {
> +               samsung,pins = "gpp4-0", "gpp4-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart2_bus_single: uart2-bus-pins {
> +               samsung,pins = "gpp4-0", "gpp4-1",
> +                              "gpp4-2", "gpp4-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi2_bus: spi2-bus-pins {
> +               samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi2_cs: spi2-cs-pins {
> +               samsung,pins = "gpp4-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi2_cs_func: spi2-cs-func-pins {
> +               samsung,pins = "gpp4-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c1_bus: hsi2c1-bus-pins {
> +               samsung,pins = "gpp2-0", "gpp2-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart1_bus_single: uart1-bus-pins {
> +               samsung,pins = "gpp2-0", "gpp2-1",
> +                              "gpp2-2", "gpp2-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi1_bus: spi1-bus-pins {
> +               samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi1_cs: spi1-cs-pins {
> +               samsung,pins = "gpp2-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi1_cs_func: spi1-cs-func-pins {
> +               samsung,pins = "gpp2-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +};
> +
> +&pinctrl_peric1 {
> +       gpp20: gpp20-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp21: gpp21-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp22: gpp22-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp23: gpp23-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp24: gpp24-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp25: gpp25-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp26: gpp26-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpp27: gpp27-gpio-bank {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       hsi2c13_bus: hsi2c13-bus-pins  {
> +               samsung,pins = "gpp25-0", "gpp25-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart13_bus_single: uart13-bus-pins {
> +               samsung,pins = "gpp25-0", "gpp25-1",
> +                              "gpp25-2", "gpp25-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi13_bus: spi13-bus-pins {
> +               samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi13_cs: spi13-cs-pins {
> +               samsung,pins = "gpp25-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi13_cs_func: spi13-cs-func-pins {
> +               samsung,pins = "gpp25-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c12_bus: hsi2c12-bus-pins {
> +               samsung,pins = "gpp23-4", "gpp23-5";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart12_bus_single: uart12-bus-pins {
> +               samsung,pins = "gpp23-4", "gpp23-5",
> +                              "gpp23-6", "gpp23-7";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi12_bus: spi12-bus-pins {
> +               samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi14_cs2: spi14-cs2-pins {
> +               samsung,pins = "gpp23-6";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi12_cs: spi12-cs-pins {
> +               samsung,pins = "gpp23-7";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi12_cs_func: spi12-cs-func-pins {
> +               samsung,pins = "gpp23-7";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c11_bus: hsi2c11-bus-pins {
> +               samsung,pins = "gpp23-0", "gpp23-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart11_bus_single: uart11-bus-pins {
> +               samsung,pins = "gpp23-0", "gpp23-1",
> +                              "gpp23-2", "gpp23-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi11_bus: spi11-bus-pins {
> +               samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi11_cs: spi11-cs-pins {
> +               samsung,pins = "gpp23-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi11_cs_func: spi11-cs-func-pins {
> +               samsung,pins = "gpp23-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c10_bus: hsi2c10-bus-pins {
> +               samsung,pins = "gpp21-0", "gpp21-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart10_bus_single: uart10-bus-pins {
> +               samsung,pins = "gpp21-0", "gpp21-1",
> +                              "gpp21-2", "gpp21-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi10_bus: spi10-bus-pins {
> +               samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi10_cs: spi10-cs-pins {
> +               samsung,pins = "gpp21-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi10_cs_func: spi10-cs-func-pins {
> +               samsung,pins = "gpp21-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c9_bus: hsi2c9-bus-pins {
> +               samsung,pins = "gpp20-4", "gpp20-5";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart9_bus_single: uart9-bus-pins {
> +               samsung,pins = "gpp20-4", "gpp20-5",
> +                              "gpp20-6", "gpp20-7";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi9_bus: spi9-bus-pins {
> +               samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi9_cs: spi9-cs-pins {
> +               samsung,pins = "gpp20-7";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi9_cs_func: spi9-cs-func-pins {
> +               samsung,pins = "gpp20-7";
> +               samsung,pin-function = <GS101_PIN_FUNC_2>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       hsi2c0_bus: hsi2c0-bus-pins {
> +               samsung,pins = "gpp20-0", "gpp20-1";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       uart0_bus_single: uart0-bus-pins {
> +               samsung,pins = "gpp20-0", "gpp20-1",
> +                              "gpp20-2", "gpp20-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +       };
> +
> +       spi0_bus: spi0-bus-pins {
> +               samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi0_cs: spi0-cs-pins {
> +               samsung,pins = "gpp20-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       spi0_cs_func: spi0-cs-func-pins {
> +               samsung,pins = "gpp20-3";
> +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +};
> +

Nitpick: this empty line is not needed.


> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
> new file mode 100644
> index 000000000000..853505e45b60
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Pinctrl binding constants for GS101
> + *
> + * Copyright (c) 2020-2023 Google, LLC.
> + */
> +
> +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__
> +#define __DT_BINDINGS_PINCTRL_GS101_H__
> +
> +#define GS101_PIN_PULL_NONE            0
> +#define GS101_PIN_PULL_DOWN            1
> +#define GS101_PIN_PULL_UP              3
> +
> +/* Pin function in power down mode */
> +#define GS101_PIN_PDN_OUT0             0
> +#define GS101_PIN_PDN_OUT1             1
> +#define GS101_PIN_PDN_INPUT            2
> +#define GS101_PIN_PDN_PREV             3
> +
> +/* GS101 drive strengths */
> +#define GS101_PIN_DRV_2_5_MA           0
> +#define GS101_PIN_DRV_5_MA             1
> +#define GS101_PIN_DRV_7_5_MA           2
> +#define GS101_PIN_DRV_10_MA            3
> +
> +#define GS101_PIN_FUNC_INPUT           0
> +#define GS101_PIN_FUNC_OUTPUT          1
> +#define GS101_PIN_FUNC_2               2
> +#define GS101_PIN_FUNC_3               3
> +#define GS101_PIN_FUNC_EINT            0xf
> +

Still feels fishy to me that it was decided to have this file instead
of re-using existing Exynos constants. For example, in Exynos850 I
used common constants and it was ok, but it's not ok for this SoC,
althought they look *identical* in a sense of pinctrl. And all those
constants already exist, also identical. So I wonder why something
like this shouldn't be done for Exynos850 as well. But ok.

> +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> new file mode 100644
> index 000000000000..40f6654a23f2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -0,0 +1,476 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * GS101 SoC
> + *
> + * Copyright 2019-2023 Google LLC
> + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
> + */
> +
> +#include <dt-bindings/clock/google,gs101.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/samsung,exynos-usi.h>
> +
> +/ {
> +       compatible = "google,gs101";
> +       #address-cells = <2>;
> +       #size-cells = <1>;
> +
> +       interrupt-parent = <&gic>;
> +
> +       aliases {
> +               pinctrl0 = &pinctrl_gpio_alive;
> +               pinctrl1 = &pinctrl_far_alive;
> +               pinctrl2 = &pinctrl_gsacore;
> +               pinctrl3 = &pinctrl_gsactrl;
> +               pinctrl4 = &pinctrl_peric0;
> +               pinctrl5 = &pinctrl_peric1;
> +               pinctrl6 = &pinctrl_hsi1;
> +               pinctrl7 = &pinctrl_hsi2;
> +               serial0 = &serial_0;

Please check commit f4324583cd4d ("arm64: dts: exynos: move aliases to
board in Exynos850"). At least for Exynos850 the serial alias was
moved to the board dts by Krzysztof.

> +       };
> +
> +       pmu-0 {
> +               compatible = "arm,cortex-a55-pmu";
> +               interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
> +       };
> +
> +       pmu-1 {
> +               compatible = "arm,cortex-a76-pmu";
> +               interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
> +       };
> +
> +       pmu-2 {
> +               compatible = "arm,cortex-x1-pmu";
> +               interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
> +       };
> +
> +       pmu-3 {
> +               compatible = "arm,dsu-pmu";
> +               interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
> +               cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
> +                      <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
> +       };
> +
> +       /* TODO replace with CCF clock */
> +       dummy_clk: oscillator {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <12345>;
> +               clock-output-names = "pclk";
> +       };

Don't you already have real USI/UART clocks implemented in your clock driver?

> +
> +       cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               cpu-map {
> +                       cluster0 {
> +                               core0 {
> +                                       cpu = <&cpu0>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu1>;
> +                               };
> +                               core2 {
> +                                       cpu = <&cpu2>;
> +                               };
> +                               core3 {
> +                                       cpu = <&cpu3>;
> +                               };
> +                       };
> +
> +                       cluster1 {
> +                               core0 {
> +                                       cpu = <&cpu4>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu5>;
> +                               };
> +                       };
> +
> +                       cluster2 {
> +                               core0 {
> +                                       cpu = <&cpu6>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu7>;
> +                               };
> +                       };
> +               };
> +
> +               cpu0: cpu@0 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a55";
> +                       reg = <0x0000>;
> +                       enable-method = "psci";
> +                       cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +                       capacity-dmips-mhz = <250>;
> +                       dynamic-power-coefficient = <70>;
> +               };
> +
> +               cpu1: cpu@100 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a55";
> +                       reg = <0x0100>;
> +                       enable-method = "psci";
> +                       cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +                       capacity-dmips-mhz = <250>;
> +                       dynamic-power-coefficient = <70>;
> +               };
> +
> +               cpu2: cpu@200 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a55";
> +                       reg = <0x0200>;
> +                       enable-method = "psci";
> +                       cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +                       capacity-dmips-mhz = <250>;
> +                       dynamic-power-coefficient = <70>;
> +               };
> +
> +               cpu3: cpu@300 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a55";
> +                       reg = <0x0300>;
> +                       enable-method = "psci";
> +                       cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +                       capacity-dmips-mhz = <250>;
> +                       dynamic-power-coefficient = <70>;
> +               };
> +
> +               cpu4: cpu@400 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a76";
> +                       reg = <0x0400>;
> +                       enable-method = "psci";
> +                       cpu-idle-states =  <&ENYO_CPU_SLEEP>;
> +                       capacity-dmips-mhz = <620>;
> +                       dynamic-power-coefficient = <284>;
> +               };
> +
> +               cpu5: cpu@500 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a76";
> +                       reg = <0x0500>;
> +                       enable-method = "psci";
> +                       cpu-idle-states =  <&ENYO_CPU_SLEEP>;
> +                       capacity-dmips-mhz = <620>;
> +                       dynamic-power-coefficient = <284>;
> +               };
> +
> +               cpu6: cpu@600 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-x1";
> +                       reg = <0x0600>;
> +                       enable-method = "psci";
> +                       cpu-idle-states =  <&HERA_CPU_SLEEP>;
> +                       capacity-dmips-mhz = <1024>;
> +                       dynamic-power-coefficient = <650>;
> +               };
> +
> +               cpu7: cpu@700 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-x1";
> +                       reg = <0x0700>;
> +                       enable-method = "psci";
> +                       cpu-idle-states =  <&HERA_CPU_SLEEP>;
> +                       capacity-dmips-mhz = <1024>;
> +                       dynamic-power-coefficient = <650>;
> +               };
> +
> +               idle-states {
> +                       entry-method = "psci";
> +
> +                       ANANKE_CPU_SLEEP: cpu-ananke-sleep {
> +                               idle-state-name = "c2";
> +                               compatible = "arm,idle-state";
> +                               arm,psci-suspend-param = <0x0010000>;
> +                               entry-latency-us = <70>;
> +                               exit-latency-us = <160>;
> +                               min-residency-us = <2000>;
> +                       };
> +
> +                       ENYO_CPU_SLEEP: cpu-enyo-sleep {
> +                               idle-state-name = "c2";
> +                               compatible = "arm,idle-state";
> +                               arm,psci-suspend-param = <0x0010000>;
> +                               entry-latency-us = <150>;
> +                               exit-latency-us = <190>;
> +                               min-residency-us = <2500>;
> +                       };
> +
> +                       HERA_CPU_SLEEP: cpu-hera-sleep {
> +                               idle-state-name = "c2";
> +                               compatible = "arm,idle-state";
> +                               arm,psci-suspend-param = <0x0010000>;
> +                               entry-latency-us = <235>;
> +                               exit-latency-us = <220>;
> +                               min-residency-us = <3500>;
> +                       };
> +               };
> +       };
> +
> +       /* ect node is required to be present by bootloader */
> +       ect {
> +       };
> +
> +       ext_24_5m: clock-1 {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-output-names = "oscclk";
> +       };
> +
> +       ext_200m: clock-2 {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-output-names = "ext-200m";
> +       };
> +
> +       psci {
> +               compatible = "arm,psci-1.0";
> +               method = "smc";
> +       };
> +
> +       reserved_memory: reserved-memory {
> +               #address-cells = <2>;
> +               #size-cells = <1>;
> +               ranges;
> +
> +               gsa_reserved_protected: gsa@90200000 {
> +                       reg = <0x0 0x90200000 0x400000>;
> +                       no-map;
> +               };
> +
> +               tpu_fw_reserved: tpu-fw@93000000 {
> +                       reg = <0x0 0x93000000 0x1000000>;
> +                       no-map;
> +               };
> +
> +               aoc_reserve: aoc@94000000 {
> +                       reg = <0x0 0x94000000 0x03000000>;
> +                       no-map;
> +               };
> +
> +               abl_reserved: abl@f8800000 {
> +                       reg = <0x0 0xf8800000 0x02000000>;
> +                       no-map;
> +               };
> +
> +               dss_log_reserved: dss-log-reserved@fd3f0000 {
> +                       reg = <0x0 0xfd3f0000 0x0000e000>;
> +                       no-map;
> +               };
> +
> +               debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
> +                       reg = <0x0 0xfd3fe000 0x00001000>;
> +                       no-map;
> +               };
> +
> +               bldr_log_reserved: bldr-log-reserved@fd800000 {
> +                       reg = <0x0 0xfd800000 0x00100000>;
> +                       no-map;
> +               };
> +
> +               bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
> +                       reg = <0x0 0xfd900000 0x00002000>;
> +                       no-map;
> +               };
> +       };
> +
> +       timer {
> +               compatible = "arm,armv8-timer";
> +               interrupts =
> +                  <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> +                  <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> +                  <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> +                  <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
> +               clock-frequency = <24576000>;
> +       };
> +
> +       soc: soc@0 {
> +               compatible = "simple-bus";
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges = <0x0 0x0 0x0 0x40000000>;
> +
> +               cmu_misc: clock-controller@10010000 {
> +                       compatible = "google,gs101-cmu-misc";
> +                       reg = <0x10010000 0x8000>;
> +                       #clock-cells = <1>;
> +                       clocks =  <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>;
> +                       clock-names = "oscclk", "dout_cmu_misc_bus";
> +               };
> +
> +               watchdog_cl0: watchdog@10060000 {
> +                       compatible = "google,gs101-wdt";
> +                       reg = <0x10060000 0x100>;
> +                       interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       clocks =
> +                         <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_IPCLKPORT_PCLK>,
> +                         <&ext_24_5m>;
> +                       clock-names = "watchdog", "watchdog_src";
> +                       samsung,syscon-phandle = <&pmu_system_controller>;
> +                       samsung,cluster-index = <0>;
> +                       status = "disabled";
> +               };

Krzysztof, can you please advice which scheme is preferred right now:
sorting by name or by address? I saw your patch for dts style doc, but
just want to know the current state of affairs.

> +
> +               watchdog_cl1: watchdog@10070000 {
> +                       compatible = "google,gs101-wdt";
> +                       reg = <0x10070000 0x100>;
> +                       interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       clocks =
> +                         <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_IPCLKPORT_PCLK>,
> +                         <&ext_24_5m>;
> +                       clock-names = "watchdog", "watchdog_src";
> +                       samsung,syscon-phandle = <&pmu_system_controller>;
> +                       samsung,cluster-index = <1>;
> +                       status = "disabled";
> +               };
> +
> +               gic: interrupt-controller@10400000 {
> +                       compatible = "arm,gic-v3";
> +                       #interrupt-cells = <4>;
> +                       interrupt-controller;
> +                       reg = <0x10400000 0x10000>, /* GICD */
> +                             <0x10440000 0x100000>;/* GICR * 8 */
> +                       interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> +                       ppi-partitions {
> +                               ppi_cluster0: interrupt-partition-0 {
> +                                       affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
> +                               };
> +
> +                               ppi_cluster1: interrupt-partition-1 {
> +                                       affinity = <&cpu4 &cpu5>;
> +                               };
> +
> +                               ppi_cluster2: interrupt-partition-2 {
> +                                       affinity = <&cpu6 &cpu7>;
> +                               };
> +                       };
> +               };
> +
> +               sysreg_peric0: syscon@10820000 {
> +                       compatible = "google,gs101-peric0-sysreg", "syscon";
> +                       reg = <0x10820000 0x10000>;
> +               };
> +
> +               pinctrl_peric0: pinctrl@10840000 {
> +                       compatible = "google,gs101-pinctrl";
> +                       reg = <0x10840000 0x00001000>;
> +                       interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
> +               };
> +
> +               usi_uart: usi@10a000c0 {
> +                       compatible = "google,gs101-usi",

I can't see this compatible in USI driver. Does it make sense to add it there?

> +                                    "samsung,exynos850-usi";
> +                       reg = <0x10a000c0 0x20>;
> +                       samsung,sysreg = <&sysreg_peric0 0x1020>;
> +                       samsung,mode = <USI_V2_UART>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       ranges;
> +                       clocks = <&dummy_clk>, <&dummy_clk>;

The same concern as above. I think I saw those clocks already
implemented in gs101 clock driver.

> +                       clock-names = "pclk", "ipclk";
> +                       status = "disabled";
> +
> +                       serial_0: serial@10a00000 {
> +                               compatible = "google,gs101-uart";
> +                               reg = <0x10a00000 0xc0>;
> +                               reg-io-width = <4>;
> +                               samsung,uart-fifosize = <256>;
> +                               interrupts = <GIC_SPI 634
> +                                             IRQ_TYPE_LEVEL_HIGH 0>;
> +                               clocks = <&dummy_clk 0>, <&dummy_clk 0>;

Ditto.

> +                               clock-names = "uart", "clk_uart_baud0";
> +                               status = "disabled";
> +                       };
> +               };
> +
> +               pinctrl_peric1: pinctrl@10c40000 {
> +                       compatible = "google,gs101-pinctrl";
> +                       reg = <0x10C40000 0x00001000>;
> +                       interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
> +               };
> +
> +               sysreg_peric1: syscon@10c20000 {
> +                       compatible = "google,gs101-peric1-sysreg", "syscon";
> +                       reg = <0x10C20000 0x10000>;
> +               };
> +
> +               pinctrl_hsi1: pinctrl@11840000 {
> +                       compatible = "google,gs101-pinctrl";
> +                       reg = <0x11840000 0x00001000>;
> +                       interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
> +               };
> +
> +               pinctrl_hsi2: pinctrl@14440000 {
> +                       compatible = "google,gs101-pinctrl";
> +                       reg = <0x14440000 0x00001000>;
> +                       interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
> +               };
> +
> +               cmu_apm: clock-controller@17400000 {
> +                       compatible = "google,gs101-cmu-apm";
> +                       reg = <0x17400000 0x8000>;
> +                       #clock-cells = <1>;
> +
> +                       clocks = <&ext_24_5m>;
> +                       clock-names = "oscclk";

Doesn't CMU_APM take any clocks from CMU_TOP?

> +               };
> +
> +               sysreg_apm: syscon@174204e0 {
> +                       compatible = "google,gs101-apm-sysreg", "syscon";
> +                       reg = <0x174204e0 0x1000>;
> +               };
> +
> +               pmu_system_controller: system-controller@17460000 {
> +                       compatible = "google,gs101-pmu", "syscon";
> +                       reg = <0x17460000 0x10000>;
> +               };

Just a suggestion: it might be relatively simple to add syscon-reboot
node in pmu_system_controller, and it might just work. One more
feature for free! :)

> +
> +               pinctrl_gpio_alive: pinctrl@174d0000 {
> +                       compatible = "google,gs101-pinctrl";
> +                       reg = <0x174d0000 0x00001000>;
> +
> +                       wakeup-interrupt-controller {
> +                               compatible = "google,gs101-wakeup-eint",
> +                                            "samsung,exynos850-wakeup-eint",
> +                                            "samsung,exynos7-wakeup-eint";
> +                       };
> +               };
> +
> +               pinctrl_far_alive: pinctrl@174e0000 {
> +                       compatible = "google,gs101-pinctrl";
> +                       reg = <0x174e0000 0x00001000>;
> +
> +                       wakeup-interrupt-controller {
> +                               compatible = "google,gs101-wakeup-eint",
> +                                            "samsung,exynos850-wakeup-eint",
> +                                            "samsung,exynos7-wakeup-eint";
> +                       };
> +               };
> +
> +               pinctrl_gsactrl: pinctrl@17940000 {
> +                       compatible = "google,gs101-pinctrl";
> +                       reg = <0x17940000 0x00001000>;
> +               };
> +
> +               pinctrl_gsacore: pinctrl@17a80000 {
> +                       compatible = "google,gs101-pinctrl";
> +                       reg = <0x17a80000 0x00001000>;
> +               };
> +
> +               cmu_top: clock-controller@1e080000 {
> +                       compatible = "google,gs101-cmu-top";
> +                       reg = <0x1e080000 0x8000>;
> +                       #clock-cells = <1>;
> +
> +                       clocks = <&ext_24_5m>;
> +                       clock-names = "oscclk";
> +               };
> +       };
> +};
> +
> +#include "gs101-pinctrl.dtsi"
> --
> 2.43.0.rc2.451.g8631bc7472-goog
>
Krzysztof Kozlowski Dec. 5, 2023, 7:19 a.m. UTC | #3
On 02/12/2023 02:54, Sam Protsenko wrote:
> On Fri, Dec 1, 2023 at 10:11 AM Peter Griffin <peter.griffin@linaro.org> wrote:
>>
>> Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6,
>> (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile
>> phones. It features:
>> * 4xA55 little cluster
>> * 2xA76 Mid cluster
>> * 2xX1 Big cluster
>>
>> This commit adds the basic device tree for gs101 (SoC).
>> Further platform support will be added over time.
>>
>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
>> ---

...

>> +
>> +               watchdog_cl0: watchdog@10060000 {
>> +                       compatible = "google,gs101-wdt";
>> +                       reg = <0x10060000 0x100>;
>> +                       interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                       clocks =
>> +                         <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_IPCLKPORT_PCLK>,
>> +                         <&ext_24_5m>;
>> +                       clock-names = "watchdog", "watchdog_src";
>> +                       samsung,syscon-phandle = <&pmu_system_controller>;
>> +                       samsung,cluster-index = <0>;
>> +                       status = "disabled";
>> +               };
> 
> Krzysztof, can you please advice which scheme is preferred right now:
> sorting by name or by address? I saw your patch for dts style doc, but
> just want to know the current state of affairs.

Use coding style, so sorting by unit address in DTSI and by
label/phandle of overrides in DTS.

Coding style was not yet applied, but I don't see any objections to it
so it is just a matter of days.

Best regards,
Krzysztof
Peter Griffin Dec. 9, 2023, 1 a.m. UTC | #4
Hi Sam,

On Sat, 2 Dec 2023 at 01:54, Sam Protsenko <semen.protsenko@linaro.org> wrote:
>
> On Fri, Dec 1, 2023 at 10:11 AM Peter Griffin <peter.griffin@linaro.org> wrote:
> >
> > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6,
> > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile
> > phones. It features:
> > * 4xA55 little cluster
> > * 2xA76 Mid cluster
> > * 2xX1 Big cluster
> >
> > This commit adds the basic device tree for gs101 (SoC).
> > Further platform support will be added over time.

[cut]

> > +       spi0_cs_func: spi0-cs-func-pins {
> > +               samsung,pins = "gpp20-3";
> > +               samsung,pin-function = <GS101_PIN_FUNC_3>;
> > +               samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> > +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> > +       };
> > +};
> > +
>
> Nitpick: this empty line is not needed.

Ok will fix

[cut]

> > +
> > +       aliases {
> > +               pinctrl0 = &pinctrl_gpio_alive;
> > +               pinctrl1 = &pinctrl_far_alive;
> > +               pinctrl2 = &pinctrl_gsacore;
> > +               pinctrl3 = &pinctrl_gsactrl;
> > +               pinctrl4 = &pinctrl_peric0;
> > +               pinctrl5 = &pinctrl_peric1;
> > +               pinctrl6 = &pinctrl_hsi1;
> > +               pinctrl7 = &pinctrl_hsi2;
> > +               serial0 = &serial_0;
>
> Please check commit f4324583cd4d ("arm64: dts: exynos: move aliases to
> board in Exynos850"). At least for Exynos850 the serial alias was
> moved to the board dts by Krzysztof.

Ok will fix

>
> > +       };
> > +
> > +       pmu-0 {
> > +               compatible = "arm,cortex-a55-pmu";
> > +               interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
> > +       };
> > +
> > +       pmu-1 {
> > +               compatible = "arm,cortex-a76-pmu";
> > +               interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
> > +       };
> > +
> > +       pmu-2 {
> > +               compatible = "arm,cortex-x1-pmu";
> > +               interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
> > +       };
> > +
> > +       pmu-3 {
> > +               compatible = "arm,dsu-pmu";
> > +               interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
> > +               cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
> > +                      <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
> > +       };
> > +
> > +       /* TODO replace with CCF clock */
> > +       dummy_clk: oscillator {
> > +               compatible = "fixed-clock";
> > +               #clock-cells = <0>;
> > +               clock-frequency = <12345>;
> > +               clock-output-names = "pclk";
> > +       };
>
> Don't you already have real USI/UART clocks implemented in your clock driver?

No, not yet, hence the dummy clock.

[cut]

> > +
> > +               usi_uart: usi@10a000c0 {
> > +                       compatible = "google,gs101-usi",
>
> I can't see this compatible in USI driver. Does it make sense to add it there?

It is not required at the moment, as it is compatible with
samsung,exynos850-usi. I don't want to keep adding more patches to
this series, and then having an endless cycle of nits.

>
> > +                                    "samsung,exynos850-usi";
> > +                       reg = <0x10a000c0 0x20>;
> > +                       samsung,sysreg = <&sysreg_peric0 0x1020>;
> > +                       samsung,mode = <USI_V2_UART>;
> > +                       #address-cells = <1>;
> > +                       #size-cells = <1>;
> > +                       ranges;
> > +                       clocks = <&dummy_clk>, <&dummy_clk>;
>
> The same concern as above. I think I saw those clocks already
> implemented in gs101 clock driver.

No, these clocks have not been implemented yet, hence the dummy clock.
There is no support for cmu_peric0 bank yet in the clock driver.

>
> > +                       clock-names = "pclk", "ipclk";
> > +                       status = "disabled";
> > +
> > +                       serial_0: serial@10a00000 {
> > +                               compatible = "google,gs101-uart";
> > +                               reg = <0x10a00000 0xc0>;
> > +                               reg-io-width = <4>;
> > +                               samsung,uart-fifosize = <256>;
> > +                               interrupts = <GIC_SPI 634
> > +                                             IRQ_TYPE_LEVEL_HIGH 0>;
> > +                               clocks = <&dummy_clk 0>, <&dummy_clk 0>;
>
> Ditto.

See above

>
> > +                               clock-names = "uart", "clk_uart_baud0";
> > +                               status = "disabled";
> > +                       };
> > +               };
> > +
> > +               pinctrl_peric1: pinctrl@10c40000 {
> > +                       compatible = "google,gs101-pinctrl";
> > +                       reg = <0x10C40000 0x00001000>;
> > +                       interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
> > +               };
> > +
> > +               sysreg_peric1: syscon@10c20000 {
> > +                       compatible = "google,gs101-peric1-sysreg", "syscon";
> > +                       reg = <0x10C20000 0x10000>;
> > +               };
> > +
> > +               pinctrl_hsi1: pinctrl@11840000 {
> > +                       compatible = "google,gs101-pinctrl";
> > +                       reg = <0x11840000 0x00001000>;
> > +                       interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
> > +               };
> > +
> > +               pinctrl_hsi2: pinctrl@14440000 {
> > +                       compatible = "google,gs101-pinctrl";
> > +                       reg = <0x14440000 0x00001000>;
> > +                       interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
> > +               };
> > +
> > +               cmu_apm: clock-controller@17400000 {
> > +                       compatible = "google,gs101-cmu-apm";
> > +                       reg = <0x17400000 0x8000>;
> > +                       #clock-cells = <1>;
> > +
> > +                       clocks = <&ext_24_5m>;
> > +                       clock-names = "oscclk";
>
> Doesn't CMU_APM take any clocks from CMU_TOP?

No it doesn't.

>
> > +               };
> > +
> > +               sysreg_apm: syscon@174204e0 {
> > +                       compatible = "google,gs101-apm-sysreg", "syscon";
> > +                       reg = <0x174204e0 0x1000>;
> > +               };
> > +
> > +               pmu_system_controller: system-controller@17460000 {
> > +                       compatible = "google,gs101-pmu", "syscon";
> > +                       reg = <0x17460000 0x10000>;
> > +               };
>
> Just a suggestion: it might be relatively simple to add syscon-reboot
> node in pmu_system_controller, and it might just work. One more
> feature for free! :)

Thanks for the suggestion. I tried that previously and it is not
included here deliberately because it relies on more than that to be
functional. Although the register offsets are the same, the PMU
registers are protected from the kernel and are only write accessible
via SMC call on this platform. I have patches ready to send out as a
RFC for that once this initial series is merged and we can discuss
that then.

regards,

Peter.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
new file mode 100644
index 000000000000..8c0f0cf75edb
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
@@ -0,0 +1,1250 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include "gs101-pinctrl.h"
+
+&pinctrl_gpio_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa5: gpa5-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa9: gpa9-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa10: gpa10-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpa2-3", "gpa2-4";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_far_alive {
+	gpa6: gpa6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa7: gpa7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa8: gpa8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa11: gpa11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+};
+
+&pinctrl_gsacore {
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps2: gps2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_gsactrl {
+	gps3: gps3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins{
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gph4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gph4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gph4-3", "gph4-4", "gph4-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp13: gpp13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp14: gpp14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp15: gpp15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp16: gpp16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp17: gpp17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp18: gpp18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp19: gpp19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* USI_PERIC0_UART_DBG */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	disp_te_pri_on: disp-te-pri-on-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_pri_off: disp-te-pri-off-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	disp_te_sec_on: disp-te-sec-on-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_sec_off: disp-te-sec-off-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_out: sensor-mclk6-out-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_fn: sensor-mclk6-fn-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_out: sensor-mclk7-out-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_fn: sensor-mclk7-fn-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_out: sensor-mclk8-out-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_fn: sensor-mclk8-fn-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1",
+			       "gpp18-2", "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
+			       "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1",
+			       "gpp14-2", "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1",
+			       "gpp12-2", "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1",
+			       "gpp10-2", "gpp10-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1",
+			       "gpp8-2", "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1",
+			       "gpp6-2", "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1",
+			       "gpp4-2", "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1",
+			       "gpp2-2", "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp20: gpp20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp21: gpp21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp22: gpp22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp23: gpp23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp24: gpp24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp25: gpp25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp26: gpp26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp27: gpp27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins  {
+		samsung,pins = "gpp25-0", "gpp25-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1",
+			       "gpp25-2", "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5",
+			       "gpp23-6", "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs2: spi14-cs2-pins {
+		samsung,pins = "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1",
+			       "gpp23-2", "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1",
+			       "gpp21-2", "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5",
+			       "gpp20-6", "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart0_bus_single: uart0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1",
+			       "gpp20-2", "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
new file mode 100644
index 000000000000..853505e45b60
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
@@ -0,0 +1,33 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl binding constants for GS101
+ *
+ * Copyright (c) 2020-2023 Google, LLC.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_GS101_H__
+#define __DT_BINDINGS_PINCTRL_GS101_H__
+
+#define GS101_PIN_PULL_NONE		0
+#define GS101_PIN_PULL_DOWN		1
+#define GS101_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define GS101_PIN_PDN_OUT0		0
+#define GS101_PIN_PDN_OUT1		1
+#define GS101_PIN_PDN_INPUT		2
+#define GS101_PIN_PDN_PREV		3
+
+/* GS101 drive strengths */
+#define GS101_PIN_DRV_2_5_MA		0
+#define GS101_PIN_DRV_5_MA		1
+#define GS101_PIN_DRV_7_5_MA		2
+#define GS101_PIN_DRV_10_MA		3
+
+#define GS101_PIN_FUNC_INPUT		0
+#define GS101_PIN_FUNC_OUTPUT		1
+#define GS101_PIN_FUNC_2		2
+#define GS101_PIN_FUNC_3		3
+#define GS101_PIN_FUNC_EINT		0xf
+
+#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
new file mode 100644
index 000000000000..40f6654a23f2
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -0,0 +1,476 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "google,gs101";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_gpio_alive;
+		pinctrl1 = &pinctrl_far_alive;
+		pinctrl2 = &pinctrl_gsacore;
+		pinctrl3 = &pinctrl_gsactrl;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_hsi1;
+		pinctrl7 = &pinctrl_hsi2;
+		serial0 = &serial_0;
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-2 {
+		compatible = "arm,cortex-x1-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	pmu-3 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	/* TODO replace with CCF clock */
+	dummy_clk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12345>;
+		clock-output-names = "pclk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0000>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0100>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0200>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0300>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0400>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0500>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0600>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0700>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			ANANKE_CPU_SLEEP: cpu-ananke-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <70>;
+				exit-latency-us = <160>;
+				min-residency-us = <2000>;
+			};
+
+			ENYO_CPU_SLEEP: cpu-enyo-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+			};
+
+			HERA_CPU_SLEEP: cpu-hera-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+			};
+		};
+	};
+
+	/* ect node is required to be present by bootloader */
+	ect {
+	};
+
+	ext_24_5m: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_200m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gsa_reserved_protected: gsa@90200000 {
+			reg = <0x0 0x90200000 0x400000>;
+			no-map;
+		};
+
+		tpu_fw_reserved: tpu-fw@93000000 {
+			reg = <0x0 0x93000000 0x1000000>;
+			no-map;
+		};
+
+		aoc_reserve: aoc@94000000 {
+			reg = <0x0 0x94000000 0x03000000>;
+			no-map;
+		};
+
+		abl_reserved: abl@f8800000 {
+			reg = <0x0 0xf8800000 0x02000000>;
+			no-map;
+		};
+
+		dss_log_reserved: dss-log-reserved@fd3f0000 {
+			reg = <0x0 0xfd3f0000 0x0000e000>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
+			reg = <0x0 0xfd3fe000 0x00001000>;
+			no-map;
+		};
+
+		bldr_log_reserved: bldr-log-reserved@fd800000 {
+			reg = <0x0 0xfd800000 0x00100000>;
+			no-map;
+		};
+
+		bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
+			reg = <0x0 0xfd900000 0x00002000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts =
+		   <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
+		clock-frequency = <24576000>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		cmu_misc: clock-controller@10010000 {
+			compatible = "google,gs101-cmu-misc";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks =  <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>;
+			clock-names = "oscclk", "dout_cmu_misc_bus";
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks =
+			  <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_IPCLKPORT_PCLK>,
+			  <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks =
+			  <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_IPCLKPORT_PCLK>,
+			  <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>, /* GICD */
+			      <0x10440000 0x100000>;/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		sysreg_peric0: syscon@10820000 {
+			compatible = "google,gs101-peric0-sysreg", "syscon";
+			reg = <0x10820000 0x10000>;
+		};
+
+		pinctrl_peric0: pinctrl@10840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10840000 0x00001000>;
+			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi_uart: usi@10a000c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10a000c0 0x20>;
+			samsung,sysreg = <&sysreg_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&dummy_clk>, <&dummy_clk>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10a00000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a00000 0xc0>;
+				reg-io-width = <4>;
+				samsung,uart-fifosize = <256>;
+				interrupts = <GIC_SPI 634
+					      IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_peric1: pinctrl@10c40000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10C40000 0x00001000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		sysreg_peric1: syscon@10c20000 {
+			compatible = "google,gs101-peric1-sysreg", "syscon";
+			reg = <0x10C20000 0x10000>;
+		};
+
+		pinctrl_hsi1: pinctrl@11840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x11840000 0x00001000>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi2: pinctrl@14440000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x14440000 0x00001000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		cmu_apm: clock-controller@17400000 {
+			compatible = "google,gs101-cmu-apm";
+			reg = <0x17400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+
+		sysreg_apm: syscon@174204e0 {
+			compatible = "google,gs101-apm-sysreg", "syscon";
+			reg = <0x174204e0 0x1000>;
+		};
+
+		pmu_system_controller: system-controller@17460000 {
+			compatible = "google,gs101-pmu", "syscon";
+			reg = <0x17460000 0x10000>;
+		};
+
+		pinctrl_gpio_alive: pinctrl@174d0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174d0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_far_alive: pinctrl@174e0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174e0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_gsactrl: pinctrl@17940000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17940000 0x00001000>;
+		};
+
+		pinctrl_gsacore: pinctrl@17a80000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17a80000 0x00001000>;
+		};
+
+		cmu_top: clock-controller@1e080000 {
+			compatible = "google,gs101-cmu-top";
+			reg = <0x1e080000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+	};
+};
+
+#include "gs101-pinctrl.dtsi"