| Message ID | 20231212014705.2017474-1-Shyam-sundar.S-k@amd.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Introduce PMF Smart PC Solution Builder Feature | expand |
Hi, On 12/12/23 02:46, Shyam Sundar S K wrote: > Smart PC Solutions Builder allows for OEM to define a large number of > custom system states to dynamically switch to. The system states are > referred to as policies, and multiple policies can be loaded onto the > system at any given time, however only one policy can be active at a > given time. > > Policy is a combination of PMF input and output capabilities. The inputs > are the incoming information from the other kernel subsystems like LID > state, Sensor info, GPU info etc and the actions are the updating the > power limits of SMU etc. > > The policy binary is signed and encrypted by a special key from AMD. This > policy binary shall have the inputs and outputs which the OEMs can build > for the platform customization that can enhance the user experience and > system behavior. > > This series adds the initial support for Smart PC solution to PMF driver. > > Note that, on platforms where CnQF and Smart PC is advertised, Smart PC > shall have higher precedence and same applies for Auto Mode. Thank you for your patch-series, I've applied the series to my review-hans branch: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window. Regards, Hans > > v6->v7: > --------- > - handle buffer free during suspend/resume > - Move Smart PC checks within Smart PC init function > - realloc a updated buffer size during the side load. > - Drop patches from 13/15 to 15/15 of V6 series > > v5->v6: > --------- > - Add Ilpo's and Mario's Reviewed-by tags > - Drop 13/17 and 14/17 patches from this series which are GPU centric > - Drop separate checks for battery handling. > - Handle SFH failure cases > > v4->v5: > --------- > - Remove PMF-GPU interface from amdgpu driver and add DRM/backlight > changes within PMF > - Add module_softdep for AMDGPU > - remove error checks for debugfs_create_file() > - Add "Reviewed-by:" tags > - Add kerneldoc for kernel-wide headers > - Add checks for acpi_backlight_native > - Add early return for SFH path > - other cosmetic changes > > v3->v4: > --------- > - Split v3 9/16 into 2 patches, that addresses using generic fn names > - Add softdep [Ilpo] instead of request_module() > - return proper ACPI status [Mario] > - Update comments in code [Mario] > - Remove missed double _ remarks > - handle battery status branches [Ilpo] > - Address KASAN problems > > v2->v3: > --------- > - Remove pci_get_device() for getting gpu handle > - add .suspend handler for pmf driver > - remove unwanted type caste > - Align comments, spaces etc. > - add wrapper for print_hex_dump_debug() > - Remove lkp tags in commit-msg > - Add macros for magic numbers > - use right format specifiers for printing > - propagate error codes back to the caller > - remove unwanted comments > > v1->v2: > --------- > - Remove __func__ macros > - Remove manual function names inside prints > - Handle tee_shm_get_va() failure > - Remove double _ > - Add meaningful prints > - pass amd_pmf_set_dram_addr() failure errors > - Add more information to commit messages > - use right format specifiers > - use devm_ioremap() instead of ioremap() > - address unsigned long vs u32 problems > - Fix lkp reported issues > - Add amd_pmf_remove_pb() to remove the debugfs files created(if any). > - Make amd_pmf_open_pb() as static. > - Add cooling device APIs for controlling amdgpu backlight > - handle amd_pmf_apply_policies() failures > - Split v1 14/15 into 2 patches further > - use linux/units.h for better handling > - add "depends on" AMD_SFH_HID for interaction with SFH > - other cosmetic remarks > > Shyam Sundar S K (12): > platform/x86/amd/pmf: Add PMF TEE interface > platform/x86/amd/pmf: Add support for PMF-TA interaction > platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr() > platform/x86/amd/pmf: Add support for PMF Policy Binary > platform/x86/amd/pmf: change amd_pmf_init_features() call sequence > platform/x86/amd/pmf: Add support to get inputs from other subsystems > platform/x86/amd/pmf: Add support update p3t limit > platform/x86/amd/pmf: Add support to update system state > platform/x86/amd/pmf: Make source_as_str() as non-static > platform/x86/amd/pmf: Add facility to dump TA inputs > platform/x86/amd/pmf: Add capability to sideload of policy binary > platform/x86/amd/pmf: dump policy binary data > > Documentation/admin-guide/index.rst | 1 + > Documentation/admin-guide/pmf.rst | 24 ++ > drivers/platform/x86/amd/pmf/Kconfig | 1 + > drivers/platform/x86/amd/pmf/Makefile | 3 +- > drivers/platform/x86/amd/pmf/acpi.c | 37 ++ > drivers/platform/x86/amd/pmf/core.c | 52 ++- > drivers/platform/x86/amd/pmf/pmf.h | 203 +++++++++++ > drivers/platform/x86/amd/pmf/spc.c | 158 +++++++++ > drivers/platform/x86/amd/pmf/sps.c | 5 +- > drivers/platform/x86/amd/pmf/tee-if.c | 469 ++++++++++++++++++++++++++ > 10 files changed, 936 insertions(+), 17 deletions(-) > create mode 100644 Documentation/admin-guide/pmf.rst > create mode 100644 drivers/platform/x86/amd/pmf/spc.c > create mode 100644 drivers/platform/x86/amd/pmf/tee-if.c >