| Message ID | 20240108232145.2116455-5-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | PCI: imx6: Clean up and add imx95 pci support | expand |
On Mon, Jan 08, 2024 at 06:21:33PM -0500, Frank Li wrote: > iMX8MQ have two pci controllers. Adds "linux,pci-domain" as required > property for iMX8MQ to indicate pci controller index. > > This adjustment paves the way for eliminating the hardcoded check on the > base register for acquiring the controller_id. > > ... > if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) > imx6_pcie->controller_id = 1; > ... > > The controller_id is crucial and utilized for certain register bit > positions. It must align precisely with the controller index in the SoC. > An auto-incremented ID don't fit this case. The DTS or fuse configurations > may deactivate specific PCI controllers. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > > Notes: > Keep current to avoid DTB_CHECK warning. After these patch merged. Will add > linux,pci-domain in all dts file. So dt-binding can remove condition check > by soc. Please don't. No need to make required everywhere. Besides not needed, it is an ABI break. Rob
On Mon, 08 Jan 2024 18:21:33 -0500, Frank Li wrote: > iMX8MQ have two pci controllers. Adds "linux,pci-domain" as required > property for iMX8MQ to indicate pci controller index. > > This adjustment paves the way for eliminating the hardcoded check on the > base register for acquiring the controller_id. > > ... > if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) > imx6_pcie->controller_id = 1; > ... > > The controller_id is crucial and utilized for certain register bit > positions. It must align precisely with the controller index in the SoC. > An auto-incremented ID don't fit this case. The DTS or fuse configurations > may deactivate specific PCI controllers. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > > Notes: > Keep current to avoid DTB_CHECK warning. After these patch merged. Will add > linux,pci-domain in all dts file. So dt-binding can remove condition check > by soc. > > Change from v5 to v6 > - rework commit message to explain why need required and why auto increase > id not work > > Change from v4 to v5 > - new patch at v5 > > .../bindings/pci/fsl,imx6q-pcie-common.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml index d91b639ae7ae7..8f39b4e6e8491 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml @@ -265,6 +265,17 @@ allOf: - const: apps - const: turnoff + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mq-pcie + - fsl,imx8mq-pcie-ep + then: + required: + - linux,pci-domain + additionalProperties: true ...
iMX8MQ have two pci controllers. Adds "linux,pci-domain" as required property for iMX8MQ to indicate pci controller index. This adjustment paves the way for eliminating the hardcoded check on the base register for acquiring the controller_id. ... if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) imx6_pcie->controller_id = 1; ... The controller_id is crucial and utilized for certain register bit positions. It must align precisely with the controller index in the SoC. An auto-incremented ID don't fit this case. The DTS or fuse configurations may deactivate specific PCI controllers. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Notes: Keep current to avoid DTB_CHECK warning. After these patch merged. Will add linux,pci-domain in all dts file. So dt-binding can remove condition check by soc. Change from v5 to v6 - rework commit message to explain why need required and why auto increase id not work Change from v4 to v5 - new patch at v5 .../bindings/pci/fsl,imx6q-pcie-common.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)