diff mbox series

[v3,11/13] wifi: ath12k: fix PCI read and write

Message ID 20240129065724.2310207-12-quic_rajkbhag@quicinc.com (mailing list archive)
State Accepted
Commit afeee629e72eeed719eb3f2918d7c8f3ae33497f
Delegated to: Kalle Valo
Headers show
Series wifi: ath12k: QCN9274 dualmac bring up | expand

Commit Message

Raj Kumar Bhagat Jan. 29, 2024, 6:57 a.m. UTC 
From: P Praneesh <quic_ppranees@quicinc.com>

Currently, PCI read is failing for the registers belonging to
SECURITY_CONTROL_WLAN registers. These registers read is required
to read the board-id to identify the dual-mac QCN9274 hardware.

The failure is because, for these registers (SECURITY_CONTROL_WLAN)
offset, ath12k_pci_get_window_start() returns window_start as 0. Due
to this PCI read is done without PCI select window and with
window_start offset as 0.

Hence, fix PCI read and write by doing PCI select window and by using
the correct window_start offset - WINDOW_START for
SECURITY_CONTROL_WLAN registers.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/pci.c | 43 ++++++++++++++-------------
 1 file changed, 23 insertions(+), 20 deletions(-)

Comments

Jeff Johnson Jan. 31, 2024, 9:08 p.m. UTC | #1 
On 1/28/2024 10:57 PM, Raj Kumar Bhagat wrote:
> From: P Praneesh <quic_ppranees@quicinc.com>
> 
> Currently, PCI read is failing for the registers belonging to
> SECURITY_CONTROL_WLAN registers. These registers read is required
> to read the board-id to identify the dual-mac QCN9274 hardware.
> 
> The failure is because, for these registers (SECURITY_CONTROL_WLAN)
> offset, ath12k_pci_get_window_start() returns window_start as 0. Due
> to this PCI read is done without PCI select window and with
> window_start offset as 0.
> 
> Hence, fix PCI read and write by doing PCI select window and by using
> the correct window_start offset - WINDOW_START for
> SECURITY_CONTROL_WLAN registers.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
> 
> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index d334f41f9658..14954bc05144 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -205,18 +205,17 @@  static u32 ath12k_pci_get_window_start(struct ath12k_base *ab,
 	/* If offset lies within CE register range, use 2nd window */
 	else if ((offset ^ HAL_CE_WFSS_CE_REG_BASE) < WINDOW_RANGE_MASK)
 		window_start = 2 * WINDOW_START;
-	/* If offset lies within PCI_BAR_WINDOW0_BASE and within PCI_SOC_PCI_REG_BASE
-	 * use 0th window
-	 */
-	else if (((offset ^ PCI_BAR_WINDOW0_BASE) < WINDOW_RANGE_MASK) &&
-		 !((offset ^ PCI_SOC_PCI_REG_BASE) < PCI_SOC_RANGE_MASK))
-		window_start = 0;
 	else
 		window_start = WINDOW_START;
 
 	return window_start;
 }
 
+static inline bool ath12k_pci_is_offset_within_mhi_region(u32 offset)
+{
+	return (offset >= PCI_MHIREGLEN_REG && offset <= PCI_MHI_REGION_END);
+}
+
 static void ath12k_pci_soc_global_reset(struct ath12k_base *ab)
 {
 	u32 val, delay;
@@ -1172,15 +1171,17 @@  u32 ath12k_pci_read32(struct ath12k_base *ab, u32 offset)
 		if (window_start == WINDOW_START) {
 			spin_lock_bh(&ab_pci->window_lock);
 			ath12k_pci_select_window(ab_pci, offset);
-			val = ioread32(ab->mem + window_start +
-				       (offset & WINDOW_RANGE_MASK));
+
+			if (ath12k_pci_is_offset_within_mhi_region(offset)) {
+				offset = offset - PCI_MHIREGLEN_REG;
+				val = ioread32(ab->mem +
+					       (offset & WINDOW_RANGE_MASK));
+			} else {
+				val = ioread32(ab->mem + window_start +
+					       (offset & WINDOW_RANGE_MASK));
+			}
 			spin_unlock_bh(&ab_pci->window_lock);
 		} else {
-			if ((!window_start) &&
-			    (offset >= PCI_MHIREGLEN_REG &&
-			     offset <= PCI_MHI_REGION_END))
-				offset = offset - PCI_MHIREGLEN_REG;
-
 			val = ioread32(ab->mem + window_start +
 				       (offset & WINDOW_RANGE_MASK));
 		}
@@ -1217,15 +1218,17 @@  void ath12k_pci_write32(struct ath12k_base *ab, u32 offset, u32 value)
 		if (window_start == WINDOW_START) {
 			spin_lock_bh(&ab_pci->window_lock);
 			ath12k_pci_select_window(ab_pci, offset);
-			iowrite32(value, ab->mem + window_start +
-				  (offset & WINDOW_RANGE_MASK));
+
+			if (ath12k_pci_is_offset_within_mhi_region(offset)) {
+				offset = offset - PCI_MHIREGLEN_REG;
+				iowrite32(value, ab->mem +
+					  (offset & WINDOW_RANGE_MASK));
+			} else {
+				iowrite32(value, ab->mem + window_start +
+					  (offset & WINDOW_RANGE_MASK));
+			}
 			spin_unlock_bh(&ab_pci->window_lock);
 		} else {
-			if ((!window_start) &&
-			    (offset >= PCI_MHIREGLEN_REG &&
-			     offset <= PCI_MHI_REGION_END))
-				offset = offset - PCI_MHIREGLEN_REG;
-
 			iowrite32(value, ab->mem + window_start +
 				  (offset & WINDOW_RANGE_MASK));
 		}