diff mbox series

[v3,03/14] block: Fix zone write plug initialization from blk_revalidate_zone_cb()

Message ID 20240501110907.96950-4-dlemoal@kernel.org (mailing list archive)
State New, archived
Headers show
Series Zone write plugging fixes and cleanup | expand

Commit Message

Damien Le Moal May 1, 2024, 11:08 a.m. UTC
When revalidating the zones of a zoned block device,
blk_revalidate_zone_cb() must allocate a zone write plug for any
sequential write required zone that is not empty nor full. However, the
current code tests the latter case by comparing the zone write pointer
offset to the zone size instead of the zone capacity. Furthermore,
disk_get_and_lock_zone_wplug() is called with a sector argument equal to
the zone start instead of the current zone write pointer position.
This commit fixes both issues by calling disk_get_and_lock_zone_wplug()
for a zone that is not empty and with a write pointer offset lower than
the zone capacity and use the zone capacity sector as the sector
argument for disk_get_and_lock_zone_wplug().

Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
 block/blk-zoned.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Hannes Reinecke May 2, 2024, 5:53 a.m. UTC | #1
On 5/1/24 13:08, Damien Le Moal wrote:
> When revalidating the zones of a zoned block device,
> blk_revalidate_zone_cb() must allocate a zone write plug for any
> sequential write required zone that is not empty nor full. However, the
> current code tests the latter case by comparing the zone write pointer
> offset to the zone size instead of the zone capacity. Furthermore,
> disk_get_and_lock_zone_wplug() is called with a sector argument equal to
> the zone start instead of the current zone write pointer position.
> This commit fixes both issues by calling disk_get_and_lock_zone_wplug()
> for a zone that is not empty and with a write pointer offset lower than
> the zone capacity and use the zone capacity sector as the sector
> argument for disk_get_and_lock_zone_wplug().
> 
> Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
> ---
>   block/blk-zoned.c | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)

Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
diff mbox series

Patch

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 731d1abb80f6..7824bd52c82c 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -1664,10 +1664,11 @@  static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 		 * empty nor full. So make sure we have a zone write plug for
 		 * such zone if the device has a zone write plug hash table.
 		 */
+		if (!disk->zone_wplugs_hash)
+			break;
 		wp_offset = blk_zone_wp_offset(zone);
-		if (disk->zone_wplugs_hash &&
-		    wp_offset && wp_offset < zone_sectors) {
-			zwplug = disk_get_and_lock_zone_wplug(disk, zone->start,
+		if (wp_offset && wp_offset < zone->capacity) {
+			zwplug = disk_get_and_lock_zone_wplug(disk, zone->wp,
 							      GFP_NOIO, &flags);
 			if (!zwplug)
 				return -ENOMEM;