| Message ID | 20240520145402.2526481-3-sean.anderson@linux.dev (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | PCI: xilinx-nwl: Add phy support | expand |
On Mon, May 20, 2024 at 10:53:57AM -0400, Sean Anderson wrote: > MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit > 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register > PCI_NUM_INTX irqs. So to enable INTA (aka hwirq 0) we should set bit 0. > Remove the subtraction of one. This fixes the following UBSAN error: Thanks for these details! I guess UBSAN == "undefined behavior sanitizer", right? That sounds like an easy way to find this but not the way users are likely to find it. I assume users would notice spurious and missing interrupts, e.g., a driver that tried to enable INTB would have actually enabled INTA, so we'd see spurious INTA interrupts and the driver would never see the INTB it expected. And a driver that tried to enable INTA would never see that interrupt, and we might not set any bit in MSGF_LEG_MASK? I think the normal way people would trip over this, i.e., spurious and missing INTx interrupts, is the important thing to mention here. > [ 5.037483] ================================================================================ > [ 5.046260] UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 > [ 5.054983] shift exponent 18446744073709551615 is too large for 32-bit type 'int' > [ 5.062813] CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268 > [ 5.070008] Hardware name: xlnx,zynqmp (DT) > [ 5.074348] Workqueue: events_unbound deferred_probe_work_func > [ 5.080410] Call trace: > [ 5.082958] dump_backtrace (arch/arm64/kernel/stacktrace.c:235) > [ 5.086850] show_stack (arch/arm64/kernel/stacktrace.c:242) > [ 5.090292] dump_stack_lvl (lib/dump_stack.c:107) > [ 5.094095] dump_stack (lib/dump_stack.c:114) > [ 5.097540] __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) > [ 5.103227] nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) > [ 5.107386] irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) > [ 5.110838] __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) > [ 5.114552] irq_startup (kernel/irq/chip.c:270) > [ 5.118266] __setup_irq (kernel/irq/manage.c:1800) > [ 5.121982] request_threaded_irq (kernel/irq/manage.c:2206) > [ 5.126412] pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) The rest of the stacktrace below is not relevant and could be omitted. The timestamps don't add useful information either. > [ 5.130303] pcie_port_probe_service (drivers/pci/pcie/portdrv.c:528) > [ 5.134915] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) > [ 5.138720] __driver_probe_device (drivers/base/dd.c:800) > [ 5.143236] driver_probe_device (drivers/base/dd.c:830) > [ 5.147571] __device_attach_driver (drivers/base/dd.c:959) > [ 5.152179] bus_for_each_drv (drivers/base/bus.c:457) > [ 5.156163] __device_attach (drivers/base/dd.c:1032) > [ 5.160147] device_initial_probe (drivers/base/dd.c:1080) > [ 5.164488] bus_probe_device (drivers/base/bus.c:532) > [ 5.168471] device_add (drivers/base/core.c:3638) > [ 5.172098] device_register (drivers/base/core.c:3714) > [ 5.175994] pcie_portdrv_probe (drivers/pci/pcie/portdrv.c:309 drivers/pci/pcie/portdrv.c:363 drivers/pci/pcie/portdrv.c:695) > [ 5.180338] pci_device_probe (drivers/pci/pci-driver.c:324 drivers/pci/pci-driver.c:392 drivers/pci/pci-driver.c:417 drivers/pci/pci-driver.c:460) > [ 5.184410] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) > [ 5.188213] __driver_probe_device (drivers/base/dd.c:800) > [ 5.192729] driver_probe_device (drivers/base/dd.c:830) > [ 5.197064] __device_attach_driver (drivers/base/dd.c:959) > [ 5.201672] bus_for_each_drv (drivers/base/bus.c:457) > [ 5.205657] __device_attach (drivers/base/dd.c:1032) > [ 5.209641] device_attach (drivers/base/dd.c:1074) > [ 5.213357] pci_bus_add_device (drivers/pci/bus.c:352) > [ 5.217518] pci_bus_add_devices (drivers/pci/bus.c:371 (discriminator 2)) > [ 5.221774] pci_host_probe (drivers/pci/probe.c:3099) > [ 5.225581] nwl_pcie_probe (drivers/pci/controller/pcie-xilinx-nwl.c:938) > [ 5.229562] platform_probe (drivers/base/platform.c:1404) > [ 5.233367] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) > [ 5.237169] __driver_probe_device (drivers/base/dd.c:800) > [ 5.241685] driver_probe_device (drivers/base/dd.c:830) > [ 5.246020] __device_attach_driver (drivers/base/dd.c:959) > [ 5.250628] bus_for_each_drv (drivers/base/bus.c:457) > [ 5.254612] __device_attach (drivers/base/dd.c:1032) > [ 5.258596] device_initial_probe (drivers/base/dd.c:1080) > [ 5.262938] bus_probe_device (drivers/base/bus.c:532) > [ 5.266920] deferred_probe_work_func (drivers/base/dd.c:124) > [ 5.271619] process_one_work (arch/arm64/include/asm/jump_label.h:21 include/linux/jump_label.h:207 include/trace/events/workqueue.h:108 kernel/workqueue.c:2632) > [ 5.275788] worker_thread (kernel/workqueue.c:2694 (discriminator 2) kernel/workqueue.c:2781 (discriminator 2)) > [ 5.279686] kthread (kernel/kthread.c:388) > [ 5.283048] ret_from_fork (arch/arm64/kernel/entry.S:862) > [ 5.286765] ================================================================================ > > Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") > Cc: <stable@vger.kernel.org> > Signed-off-by: Sean Anderson <sean.anderson@linux.dev> > --- > > Changes in v3: > - Expand commit message > > drivers/pci/controller/pcie-xilinx-nwl.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c > index 0408f4d612b5..437927e3bcca 100644 > --- a/drivers/pci/controller/pcie-xilinx-nwl.c > +++ b/drivers/pci/controller/pcie-xilinx-nwl.c > @@ -371,7 +371,7 @@ static void nwl_mask_intx_irq(struct irq_data *data) > u32 mask; > u32 val; > > - mask = 1 << (data->hwirq - 1); > + mask = 1 << data->hwirq; > raw_spin_lock_irqsave(&pcie->leg_mask_lock, flags); > val = nwl_bridge_readl(pcie, MSGF_LEG_MASK); > nwl_bridge_writel(pcie, (val & (~mask)), MSGF_LEG_MASK); > @@ -385,7 +385,7 @@ static void nwl_unmask_intx_irq(struct irq_data *data) > u32 mask; > u32 val; > > - mask = 1 << (data->hwirq - 1); > + mask = 1 << data->hwirq; > raw_spin_lock_irqsave(&pcie->leg_mask_lock, flags); > val = nwl_bridge_readl(pcie, MSGF_LEG_MASK); > nwl_bridge_writel(pcie, (val | mask), MSGF_LEG_MASK); > -- > 2.35.1.1320.gc452695387.dirty >
On 5/22/24 18:28, Bjorn Helgaas wrote: > On Mon, May 20, 2024 at 10:53:57AM -0400, Sean Anderson wrote: >> MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit >> 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register >> PCI_NUM_INTX irqs. So to enable INTA (aka hwirq 0) we should set bit 0. >> Remove the subtraction of one. This fixes the following UBSAN error: > > Thanks for these details! > > I guess UBSAN == "undefined behavior sanitizer", right? That sounds > like an easy way to find this but not the way users are likely to find > it. It's pretty likely they will find it this way, since I found it this way and no one else had ;) > I assume users would notice spurious and missing interrupts, e.g., > a driver that tried to enable INTB would have actually enabled INTA, > so we'd see spurious INTA interrupts and the driver would never see > the INTB it expected. > > And a driver that tried to enable INTA would never see that interrupt, > and we might not set any bit in MSGF_LEG_MASK? And yes, this would manifest as INTx interrupts being broken. > I think the normal way people would trip over this, i.e., spurious and > missing INTx interrupts, is the important thing to mention here. > >> [ 5.037483] ================================================================================ >> [ 5.046260] UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 >> [ 5.054983] shift exponent 18446744073709551615 is too large for 32-bit type 'int' >> [ 5.062813] CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268 >> [ 5.070008] Hardware name: xlnx,zynqmp (DT) >> [ 5.074348] Workqueue: events_unbound deferred_probe_work_func >> [ 5.080410] Call trace: >> [ 5.082958] dump_backtrace (arch/arm64/kernel/stacktrace.c:235) >> [ 5.086850] show_stack (arch/arm64/kernel/stacktrace.c:242) >> [ 5.090292] dump_stack_lvl (lib/dump_stack.c:107) >> [ 5.094095] dump_stack (lib/dump_stack.c:114) >> [ 5.097540] __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) >> [ 5.103227] nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) >> [ 5.107386] irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) >> [ 5.110838] __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) >> [ 5.114552] irq_startup (kernel/irq/chip.c:270) >> [ 5.118266] __setup_irq (kernel/irq/manage.c:1800) >> [ 5.121982] request_threaded_irq (kernel/irq/manage.c:2206) >> [ 5.126412] pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) > > The rest of the stacktrace below is not relevant and could be omitted. > The timestamps don't add useful information either. OK --Sean >> [ 5.130303] pcie_port_probe_service (drivers/pci/pcie/portdrv.c:528) >> [ 5.134915] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) >> [ 5.138720] __driver_probe_device (drivers/base/dd.c:800) >> [ 5.143236] driver_probe_device (drivers/base/dd.c:830) >> [ 5.147571] __device_attach_driver (drivers/base/dd.c:959) >> [ 5.152179] bus_for_each_drv (drivers/base/bus.c:457) >> [ 5.156163] __device_attach (drivers/base/dd.c:1032) >> [ 5.160147] device_initial_probe (drivers/base/dd.c:1080) >> [ 5.164488] bus_probe_device (drivers/base/bus.c:532) >> [ 5.168471] device_add (drivers/base/core.c:3638) >> [ 5.172098] device_register (drivers/base/core.c:3714) >> [ 5.175994] pcie_portdrv_probe (drivers/pci/pcie/portdrv.c:309 drivers/pci/pcie/portdrv.c:363 drivers/pci/pcie/portdrv.c:695) >> [ 5.180338] pci_device_probe (drivers/pci/pci-driver.c:324 drivers/pci/pci-driver.c:392 drivers/pci/pci-driver.c:417 drivers/pci/pci-driver.c:460) >> [ 5.184410] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) >> [ 5.188213] __driver_probe_device (drivers/base/dd.c:800) >> [ 5.192729] driver_probe_device (drivers/base/dd.c:830) >> [ 5.197064] __device_attach_driver (drivers/base/dd.c:959) >> [ 5.201672] bus_for_each_drv (drivers/base/bus.c:457) >> [ 5.205657] __device_attach (drivers/base/dd.c:1032) >> [ 5.209641] device_attach (drivers/base/dd.c:1074) >> [ 5.213357] pci_bus_add_device (drivers/pci/bus.c:352) >> [ 5.217518] pci_bus_add_devices (drivers/pci/bus.c:371 (discriminator 2)) >> [ 5.221774] pci_host_probe (drivers/pci/probe.c:3099) >> [ 5.225581] nwl_pcie_probe (drivers/pci/controller/pcie-xilinx-nwl.c:938) >> [ 5.229562] platform_probe (drivers/base/platform.c:1404) >> [ 5.233367] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) >> [ 5.237169] __driver_probe_device (drivers/base/dd.c:800) >> [ 5.241685] driver_probe_device (drivers/base/dd.c:830) >> [ 5.246020] __device_attach_driver (drivers/base/dd.c:959) >> [ 5.250628] bus_for_each_drv (drivers/base/bus.c:457) >> [ 5.254612] __device_attach (drivers/base/dd.c:1032) >> [ 5.258596] device_initial_probe (drivers/base/dd.c:1080) >> [ 5.262938] bus_probe_device (drivers/base/bus.c:532) >> [ 5.266920] deferred_probe_work_func (drivers/base/dd.c:124) >> [ 5.271619] process_one_work (arch/arm64/include/asm/jump_label.h:21 include/linux/jump_label.h:207 include/trace/events/workqueue.h:108 kernel/workqueue.c:2632) >> [ 5.275788] worker_thread (kernel/workqueue.c:2694 (discriminator 2) kernel/workqueue.c:2781 (discriminator 2)) >> [ 5.279686] kthread (kernel/kthread.c:388) >> [ 5.283048] ret_from_fork (arch/arm64/kernel/entry.S:862) >> [ 5.286765] ================================================================================ >> >> Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") >> Cc: <stable@vger.kernel.org> >> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> >> --- >> >> Changes in v3: >> - Expand commit message >> >> drivers/pci/controller/pcie-xilinx-nwl.c | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c >> index 0408f4d612b5..437927e3bcca 100644 >> --- a/drivers/pci/controller/pcie-xilinx-nwl.c >> +++ b/drivers/pci/controller/pcie-xilinx-nwl.c >> @@ -371,7 +371,7 @@ static void nwl_mask_intx_irq(struct irq_data *data) >> u32 mask; >> u32 val; >> >> - mask = 1 << (data->hwirq - 1); >> + mask = 1 << data->hwirq; >> raw_spin_lock_irqsave(&pcie->leg_mask_lock, flags); >> val = nwl_bridge_readl(pcie, MSGF_LEG_MASK); >> nwl_bridge_writel(pcie, (val & (~mask)), MSGF_LEG_MASK); >> @@ -385,7 +385,7 @@ static void nwl_unmask_intx_irq(struct irq_data *data) >> u32 mask; >> u32 val; >> >> - mask = 1 << (data->hwirq - 1); >> + mask = 1 << data->hwirq; >> raw_spin_lock_irqsave(&pcie->leg_mask_lock, flags); >> val = nwl_bridge_readl(pcie, MSGF_LEG_MASK); >> nwl_bridge_writel(pcie, (val | mask), MSGF_LEG_MASK); >> -- >> 2.35.1.1320.gc452695387.dirty >>
On Thu, May 23, 2024 at 11:21:52AM -0400, Sean Anderson wrote: > On 5/22/24 18:28, Bjorn Helgaas wrote: > > On Mon, May 20, 2024 at 10:53:57AM -0400, Sean Anderson wrote: > >> MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit > >> 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register > >> PCI_NUM_INTX irqs. So to enable INTA (aka hwirq 0) we should set bit 0. > >> Remove the subtraction of one. This fixes the following UBSAN error: > > > > Thanks for these details! > > > > I guess UBSAN == "undefined behavior sanitizer", right? That sounds > > like an easy way to find this but not the way users are likely to find > > it. > > It's pretty likely they will find it this way, since I found it this way > and no one else had ;) > > > I assume users would notice spurious and missing interrupts, e.g., > > a driver that tried to enable INTB would have actually enabled INTA, > > so we'd see spurious INTA interrupts and the driver would never see > > the INTB it expected. > > > > And a driver that tried to enable INTA would never see that interrupt, > > and we might not set any bit in MSGF_LEG_MASK? > > And yes, this would manifest as INTx interrupts being broken. > It's so weird that it's been broken for seven years and no one reported it. :/ regards, dan carpenter
On 5/24/24 10:56, Dan Carpenter wrote: > On Thu, May 23, 2024 at 11:21:52AM -0400, Sean Anderson wrote: >> On 5/22/24 18:28, Bjorn Helgaas wrote: >> > On Mon, May 20, 2024 at 10:53:57AM -0400, Sean Anderson wrote: >> >> MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit >> >> 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register >> >> PCI_NUM_INTX irqs. So to enable INTA (aka hwirq 0) we should set bit 0. >> >> Remove the subtraction of one. This fixes the following UBSAN error: >> > >> > Thanks for these details! >> > >> > I guess UBSAN == "undefined behavior sanitizer", right? That sounds >> > like an easy way to find this but not the way users are likely to find >> > it. >> >> It's pretty likely they will find it this way, since I found it this way >> and no one else had ;) >> >> > I assume users would notice spurious and missing interrupts, e.g., >> > a driver that tried to enable INTB would have actually enabled INTA, >> > so we'd see spurious INTA interrupts and the driver would never see >> > the INTB it expected. >> > >> > And a driver that tried to enable INTA would never see that interrupt, >> > and we might not set any bit in MSGF_LEG_MASK? >> >> And yes, this would manifest as INTx interrupts being broken. >> > > It's so weird that it's been broken for seven years and no one reported > it. :/ If I had to guess it's because most PCIe hardware uses MSIs. Unless you plugged in a PCI bridge there's almost no reason to use INTx at all. --Sean
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c index 0408f4d612b5..437927e3bcca 100644 --- a/drivers/pci/controller/pcie-xilinx-nwl.c +++ b/drivers/pci/controller/pcie-xilinx-nwl.c @@ -371,7 +371,7 @@ static void nwl_mask_intx_irq(struct irq_data *data) u32 mask; u32 val; - mask = 1 << (data->hwirq - 1); + mask = 1 << data->hwirq; raw_spin_lock_irqsave(&pcie->leg_mask_lock, flags); val = nwl_bridge_readl(pcie, MSGF_LEG_MASK); nwl_bridge_writel(pcie, (val & (~mask)), MSGF_LEG_MASK); @@ -385,7 +385,7 @@ static void nwl_unmask_intx_irq(struct irq_data *data) u32 mask; u32 val; - mask = 1 << (data->hwirq - 1); + mask = 1 << data->hwirq; raw_spin_lock_irqsave(&pcie->leg_mask_lock, flags); val = nwl_bridge_readl(pcie, MSGF_LEG_MASK); nwl_bridge_writel(pcie, (val | mask), MSGF_LEG_MASK);
MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX irqs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This fixes the following UBSAN error: [ 5.037483] ================================================================================ [ 5.046260] UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 [ 5.054983] shift exponent 18446744073709551615 is too large for 32-bit type 'int' [ 5.062813] CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268 [ 5.070008] Hardware name: xlnx,zynqmp (DT) [ 5.074348] Workqueue: events_unbound deferred_probe_work_func [ 5.080410] Call trace: [ 5.082958] dump_backtrace (arch/arm64/kernel/stacktrace.c:235) [ 5.086850] show_stack (arch/arm64/kernel/stacktrace.c:242) [ 5.090292] dump_stack_lvl (lib/dump_stack.c:107) [ 5.094095] dump_stack (lib/dump_stack.c:114) [ 5.097540] __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) [ 5.103227] nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) [ 5.107386] irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.110838] __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.114552] irq_startup (kernel/irq/chip.c:270) [ 5.118266] __setup_irq (kernel/irq/manage.c:1800) [ 5.121982] request_threaded_irq (kernel/irq/manage.c:2206) [ 5.126412] pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) [ 5.130303] pcie_port_probe_service (drivers/pci/pcie/portdrv.c:528) [ 5.134915] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) [ 5.138720] __driver_probe_device (drivers/base/dd.c:800) [ 5.143236] driver_probe_device (drivers/base/dd.c:830) [ 5.147571] __device_attach_driver (drivers/base/dd.c:959) [ 5.152179] bus_for_each_drv (drivers/base/bus.c:457) [ 5.156163] __device_attach (drivers/base/dd.c:1032) [ 5.160147] device_initial_probe (drivers/base/dd.c:1080) [ 5.164488] bus_probe_device (drivers/base/bus.c:532) [ 5.168471] device_add (drivers/base/core.c:3638) [ 5.172098] device_register (drivers/base/core.c:3714) [ 5.175994] pcie_portdrv_probe (drivers/pci/pcie/portdrv.c:309 drivers/pci/pcie/portdrv.c:363 drivers/pci/pcie/portdrv.c:695) [ 5.180338] pci_device_probe (drivers/pci/pci-driver.c:324 drivers/pci/pci-driver.c:392 drivers/pci/pci-driver.c:417 drivers/pci/pci-driver.c:460) [ 5.184410] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) [ 5.188213] __driver_probe_device (drivers/base/dd.c:800) [ 5.192729] driver_probe_device (drivers/base/dd.c:830) [ 5.197064] __device_attach_driver (drivers/base/dd.c:959) [ 5.201672] bus_for_each_drv (drivers/base/bus.c:457) [ 5.205657] __device_attach (drivers/base/dd.c:1032) [ 5.209641] device_attach (drivers/base/dd.c:1074) [ 5.213357] pci_bus_add_device (drivers/pci/bus.c:352) [ 5.217518] pci_bus_add_devices (drivers/pci/bus.c:371 (discriminator 2)) [ 5.221774] pci_host_probe (drivers/pci/probe.c:3099) [ 5.225581] nwl_pcie_probe (drivers/pci/controller/pcie-xilinx-nwl.c:938) [ 5.229562] platform_probe (drivers/base/platform.c:1404) [ 5.233367] really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) [ 5.237169] __driver_probe_device (drivers/base/dd.c:800) [ 5.241685] driver_probe_device (drivers/base/dd.c:830) [ 5.246020] __device_attach_driver (drivers/base/dd.c:959) [ 5.250628] bus_for_each_drv (drivers/base/bus.c:457) [ 5.254612] __device_attach (drivers/base/dd.c:1032) [ 5.258596] device_initial_probe (drivers/base/dd.c:1080) [ 5.262938] bus_probe_device (drivers/base/bus.c:532) [ 5.266920] deferred_probe_work_func (drivers/base/dd.c:124) [ 5.271619] process_one_work (arch/arm64/include/asm/jump_label.h:21 include/linux/jump_label.h:207 include/trace/events/workqueue.h:108 kernel/workqueue.c:2632) [ 5.275788] worker_thread (kernel/workqueue.c:2694 (discriminator 2) kernel/workqueue.c:2781 (discriminator 2)) [ 5.279686] kthread (kernel/kthread.c:388) [ 5.283048] ret_from_fork (arch/arm64/kernel/entry.S:862) [ 5.286765] ================================================================================ Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Cc: <stable@vger.kernel.org> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> --- Changes in v3: - Expand commit message drivers/pci/controller/pcie-xilinx-nwl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)