diff mbox series

[05/14] dt-bindings: PCI: qcom-ep: Document "linux,pci-domain" property

Message ID 20240715-pci-qcom-hotplug-v1-5-5f3765cc873a@linaro.org (mailing list archive)
State Superseded
Headers show
Series PCI: qcom: Simulate PCIe hotplug using 'global' interrupt | expand

Commit Message

Manivannan Sadhasivam via B4 Relay July 15, 2024, 5:33 p.m. UTC
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

'linux,pci-domain' property provides the PCI domain number for the PCI
endpoint controllers in a SoC. If this property is not present, then an
unstable (across boots) unique number will be assigned.

Use this property to specify the domain number based on the actual hardware
instance of the PCI endpoint controllers in a SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Neil Armstrong July 16, 2024, 8:41 a.m. UTC | #1
On 15/07/2024 19:33, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> 'linux,pci-domain' property provides the PCI domain number for the PCI
> endpoint controllers in a SoC. If this property is not present, then an
> unstable (across boots) unique number will be assigned.
> 
> Use this property to specify the domain number based on the actual hardware
> instance of the PCI endpoint controllers in a SoC.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>   Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> index 46802f7d9482..1226ee5d08d1 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> @@ -280,4 +280,5 @@ examples:
>           phy-names = "pciephy";
>           max-link-speed = <3>;
>           num-lanes = <2>;
> +        linux,pci-domain = <0>;
>       };
> 

I think this should be squashed into the previous patch

Neil
Rob Herring July 22, 2024, 11:50 p.m. UTC | #2
On Mon, Jul 15, 2024 at 11:03:47PM +0530, Manivannan Sadhasivam wrote:
> 'linux,pci-domain' property provides the PCI domain number for the PCI
> endpoint controllers in a SoC. If this property is not present, then an
> unstable (across boots) unique number will be assigned.

You aren't "documenting" it here as the subject says, just using it in 
the example.

> 
> Use this property to specify the domain number based on the actual hardware
> instance of the PCI endpoint controllers in a SoC.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> index 46802f7d9482..1226ee5d08d1 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> @@ -280,4 +280,5 @@ examples:
>          phy-names = "pciephy";
>          max-link-speed = <3>;
>          num-lanes = <2>;
> +        linux,pci-domain = <0>;
>      };
> 
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index 46802f7d9482..1226ee5d08d1 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -280,4 +280,5 @@  examples:
         phy-names = "pciephy";
         max-link-speed = <3>;
         num-lanes = <2>;
+        linux,pci-domain = <0>;
     };