Message ID | 65dbad1fda08a32922c44886e4581e49b4a2fecc.1718268003.git.haibo1.xu@intel.com (mailing list archive) |
---|---|
State | Accepted |
Commit | eabd9db64ea8ba64d2a0b1d70da38e1a95dcd08b |
Headers | show |
Series | Add ACPI NUMA support for RISC-V | expand |
On Thu, Jun 13, 2024 at 04:54:33PM GMT, Haibo Xu wrote: > Add acpi_numa.c file to enable parse NUMA information from > ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and > memory nodes to proximity domain mapping, while SLIT table > provide the distance metrics between proximity domains. > > Signed-off-by: Haibo Xu <haibo1.xu@intel.com> > Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> > --- > arch/riscv/include/asm/acpi.h | 15 +++- > arch/riscv/kernel/Makefile | 1 + > arch/riscv/kernel/acpi.c | 5 -- > arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++ > arch/riscv/kernel/setup.c | 4 +- > arch/riscv/kernel/smpboot.c | 2 - > include/linux/acpi.h | 6 ++ > 7 files changed, 154 insertions(+), 10 deletions(-) > create mode 100644 arch/riscv/kernel/acpi_numa.c > > diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h > index 7dad0cf9d701..e0a1f84404f3 100644 > --- a/arch/riscv/include/asm/acpi.h > +++ b/arch/riscv/include/asm/acpi.h > @@ -61,11 +61,14 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) { } > > void acpi_init_rintc_map(void); > struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu); > -u32 get_acpi_id_for_cpu(int cpu); > +static inline u32 get_acpi_id_for_cpu(int cpu) > +{ > + return acpi_cpu_get_madt_rintc(cpu)->uid; > +} > + > int acpi_get_riscv_isa(struct acpi_table_header *table, > unsigned int cpu, const char **isa); > > -static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } > void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size, > u32 *cboz_size, u32 *cbop_size); > #else > @@ -87,4 +90,12 @@ static inline void acpi_get_cbo_block_size(struct acpi_table_header *table, > > #endif /* CONFIG_ACPI */ > > +#ifdef CONFIG_ACPI_NUMA > +int acpi_numa_get_nid(unsigned int cpu); > +void acpi_map_cpus_to_nodes(void); > +#else > +static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } > +static inline void acpi_map_cpus_to_nodes(void) { } > +#endif /* CONFIG_ACPI_NUMA */ > + > #endif /*_ASM_ACPI_H*/ > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile > index 5b243d46f4b1..1e2afec141b5 100644 > --- a/arch/riscv/kernel/Makefile > +++ b/arch/riscv/kernel/Makefile > @@ -110,3 +110,4 @@ obj-$(CONFIG_COMPAT) += compat_vdso/ > > obj-$(CONFIG_64BIT) += pi/ > obj-$(CONFIG_ACPI) += acpi.o > +obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o > diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c > index e619edc8b0cc..040bdbfea2b4 100644 > --- a/arch/riscv/kernel/acpi.c > +++ b/arch/riscv/kernel/acpi.c > @@ -191,11 +191,6 @@ struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu) > return &cpu_madt_rintc[cpu]; > } > > -u32 get_acpi_id_for_cpu(int cpu) > -{ > - return acpi_cpu_get_madt_rintc(cpu)->uid; > -} > - > /* > * __acpi_map_table() will be called before paging_init(), so early_ioremap() > * or early_memremap() should be called here to for ACPI table mapping. > diff --git a/arch/riscv/kernel/acpi_numa.c b/arch/riscv/kernel/acpi_numa.c > new file mode 100644 > index 000000000000..0231482d6946 > --- /dev/null > +++ b/arch/riscv/kernel/acpi_numa.c > @@ -0,0 +1,131 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * ACPI 6.6 based NUMA setup for RISCV > + * Lots of code was borrowed from arch/arm64/kernel/acpi_numa.c > + * > + * Copyright 2004 Andi Kleen, SuSE Labs. > + * Copyright (C) 2013-2016, Linaro Ltd. > + * Author: Hanjun Guo <hanjun.guo@linaro.org> > + * Copyright (C) 2024 Intel Corporation. > + * > + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. > + * > + * Called from acpi_numa_init while reading the SRAT and SLIT tables. > + * Assumes all memory regions belonging to a single proximity domain > + * are in one chunk. Holes between them will be included in the node. > + */ > + > +#define pr_fmt(fmt) "ACPI: NUMA: " fmt > + > +#include <linux/acpi.h> > +#include <linux/bitmap.h> > +#include <linux/kernel.h> > +#include <linux/mm.h> > +#include <linux/memblock.h> > +#include <linux/mmzone.h> > +#include <linux/module.h> > +#include <linux/topology.h> > + > +#include <asm/numa.h> > + > +static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE }; This only sets acpi_early_node_map[0] to NUMA_NO_NODE. Assuming we want to ensure all of them are initialized to NUMA_NO_NODE, then we need static int acpi_early_node_map[NR_CPUS] __initdata = { [0 ... NR_CPUS - 1] = NUMA_NO_NODE }; Thanks, drew
On Tue, Jul 23, 2024 at 9:30 PM Andrew Jones <ajones@ventanamicro.com> wrote: > > On Thu, Jun 13, 2024 at 04:54:33PM GMT, Haibo Xu wrote: > > Add acpi_numa.c file to enable parse NUMA information from > > ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and > > memory nodes to proximity domain mapping, while SLIT table > > provide the distance metrics between proximity domains. > > > > Signed-off-by: Haibo Xu <haibo1.xu@intel.com> > > Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> > > --- > > arch/riscv/include/asm/acpi.h | 15 +++- > > arch/riscv/kernel/Makefile | 1 + > > arch/riscv/kernel/acpi.c | 5 -- > > arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++ > > arch/riscv/kernel/setup.c | 4 +- > > arch/riscv/kernel/smpboot.c | 2 - > > include/linux/acpi.h | 6 ++ > > 7 files changed, 154 insertions(+), 10 deletions(-) > > create mode 100644 arch/riscv/kernel/acpi_numa.c > > > > diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h > > index 7dad0cf9d701..e0a1f84404f3 100644 > > --- a/arch/riscv/include/asm/acpi.h > > +++ b/arch/riscv/include/asm/acpi.h > > @@ -61,11 +61,14 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) { } > > > > void acpi_init_rintc_map(void); > > struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu); > > -u32 get_acpi_id_for_cpu(int cpu); > > +static inline u32 get_acpi_id_for_cpu(int cpu) > > +{ > > + return acpi_cpu_get_madt_rintc(cpu)->uid; > > +} > > + > > int acpi_get_riscv_isa(struct acpi_table_header *table, > > unsigned int cpu, const char **isa); > > > > -static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } > > void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size, > > u32 *cboz_size, u32 *cbop_size); > > #else > > @@ -87,4 +90,12 @@ static inline void acpi_get_cbo_block_size(struct acpi_table_header *table, > > > > #endif /* CONFIG_ACPI */ > > > > +#ifdef CONFIG_ACPI_NUMA > > +int acpi_numa_get_nid(unsigned int cpu); > > +void acpi_map_cpus_to_nodes(void); > > +#else > > +static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } > > +static inline void acpi_map_cpus_to_nodes(void) { } > > +#endif /* CONFIG_ACPI_NUMA */ > > + > > #endif /*_ASM_ACPI_H*/ > > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile > > index 5b243d46f4b1..1e2afec141b5 100644 > > --- a/arch/riscv/kernel/Makefile > > +++ b/arch/riscv/kernel/Makefile > > @@ -110,3 +110,4 @@ obj-$(CONFIG_COMPAT) += compat_vdso/ > > > > obj-$(CONFIG_64BIT) += pi/ > > obj-$(CONFIG_ACPI) += acpi.o > > +obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o > > diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c > > index e619edc8b0cc..040bdbfea2b4 100644 > > --- a/arch/riscv/kernel/acpi.c > > +++ b/arch/riscv/kernel/acpi.c > > @@ -191,11 +191,6 @@ struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu) > > return &cpu_madt_rintc[cpu]; > > } > > > > -u32 get_acpi_id_for_cpu(int cpu) > > -{ > > - return acpi_cpu_get_madt_rintc(cpu)->uid; > > -} > > - > > /* > > * __acpi_map_table() will be called before paging_init(), so early_ioremap() > > * or early_memremap() should be called here to for ACPI table mapping. > > diff --git a/arch/riscv/kernel/acpi_numa.c b/arch/riscv/kernel/acpi_numa.c > > new file mode 100644 > > index 000000000000..0231482d6946 > > --- /dev/null > > +++ b/arch/riscv/kernel/acpi_numa.c > > @@ -0,0 +1,131 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * ACPI 6.6 based NUMA setup for RISCV > > + * Lots of code was borrowed from arch/arm64/kernel/acpi_numa.c > > + * > > + * Copyright 2004 Andi Kleen, SuSE Labs. > > + * Copyright (C) 2013-2016, Linaro Ltd. > > + * Author: Hanjun Guo <hanjun.guo@linaro.org> > > + * Copyright (C) 2024 Intel Corporation. > > + * > > + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. > > + * > > + * Called from acpi_numa_init while reading the SRAT and SLIT tables. > > + * Assumes all memory regions belonging to a single proximity domain > > + * are in one chunk. Holes between them will be included in the node. > > + */ > > + > > +#define pr_fmt(fmt) "ACPI: NUMA: " fmt > > + > > +#include <linux/acpi.h> > > +#include <linux/bitmap.h> > > +#include <linux/kernel.h> > > +#include <linux/mm.h> > > +#include <linux/memblock.h> > > +#include <linux/mmzone.h> > > +#include <linux/module.h> > > +#include <linux/topology.h> > > + > > +#include <asm/numa.h> > > + > > +static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE }; > > This only sets acpi_early_node_map[0] to NUMA_NO_NODE. Assuming we want > to ensure all of them are initialized to NUMA_NO_NODE, then we need > > static int acpi_early_node_map[NR_CPUS] __initdata = { [0 ... NR_CPUS - 1] = NUMA_NO_NODE }; > Good catch! Thanks! @Palmer Dabbelt I noticed this series had been merged to riscv/linux.git (for-next), could you help include the above change from Drew? Or shall I send out a new series? Regards, Haibo > Thanks, > drew
On Tue, Jul 23, 2024 at 7:51 PM Haibo Xu <xiaobo55x@gmail.com> wrote: > > On Tue, Jul 23, 2024 at 9:30 PM Andrew Jones <ajones@ventanamicro.com> wrote: > > > > On Thu, Jun 13, 2024 at 04:54:33PM GMT, Haibo Xu wrote: > > > Add acpi_numa.c file to enable parse NUMA information from > > > ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and > > > memory nodes to proximity domain mapping, while SLIT table > > > provide the distance metrics between proximity domains. > > > > > > Signed-off-by: Haibo Xu <haibo1.xu@intel.com> > > > Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> > > > --- > > > arch/riscv/include/asm/acpi.h | 15 +++- > > > arch/riscv/kernel/Makefile | 1 + > > > arch/riscv/kernel/acpi.c | 5 -- > > > arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++ > > > arch/riscv/kernel/setup.c | 4 +- > > > arch/riscv/kernel/smpboot.c | 2 - > > > include/linux/acpi.h | 6 ++ > > > 7 files changed, 154 insertions(+), 10 deletions(-) > > > create mode 100644 arch/riscv/kernel/acpi_numa.c > > > > > > diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h > > > index 7dad0cf9d701..e0a1f84404f3 100644 > > > --- a/arch/riscv/include/asm/acpi.h > > > +++ b/arch/riscv/include/asm/acpi.h > > > @@ -61,11 +61,14 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) { } > > > > > > void acpi_init_rintc_map(void); > > > struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu); > > > -u32 get_acpi_id_for_cpu(int cpu); > > > +static inline u32 get_acpi_id_for_cpu(int cpu) > > > +{ > > > + return acpi_cpu_get_madt_rintc(cpu)->uid; > > > +} > > > + > > > int acpi_get_riscv_isa(struct acpi_table_header *table, > > > unsigned int cpu, const char **isa); > > > > > > -static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } > > > void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size, > > > u32 *cboz_size, u32 *cbop_size); > > > #else > > > @@ -87,4 +90,12 @@ static inline void acpi_get_cbo_block_size(struct acpi_table_header *table, > > > > > > #endif /* CONFIG_ACPI */ > > > > > > +#ifdef CONFIG_ACPI_NUMA > > > +int acpi_numa_get_nid(unsigned int cpu); > > > +void acpi_map_cpus_to_nodes(void); > > > +#else > > > +static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } > > > +static inline void acpi_map_cpus_to_nodes(void) { } > > > +#endif /* CONFIG_ACPI_NUMA */ > > > + > > > #endif /*_ASM_ACPI_H*/ > > > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile > > > index 5b243d46f4b1..1e2afec141b5 100644 > > > --- a/arch/riscv/kernel/Makefile > > > +++ b/arch/riscv/kernel/Makefile > > > @@ -110,3 +110,4 @@ obj-$(CONFIG_COMPAT) += compat_vdso/ > > > > > > obj-$(CONFIG_64BIT) += pi/ > > > obj-$(CONFIG_ACPI) += acpi.o > > > +obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o > > > diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c > > > index e619edc8b0cc..040bdbfea2b4 100644 > > > --- a/arch/riscv/kernel/acpi.c > > > +++ b/arch/riscv/kernel/acpi.c > > > @@ -191,11 +191,6 @@ struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu) > > > return &cpu_madt_rintc[cpu]; > > > } > > > > > > -u32 get_acpi_id_for_cpu(int cpu) > > > -{ > > > - return acpi_cpu_get_madt_rintc(cpu)->uid; > > > -} > > > - > > > /* > > > * __acpi_map_table() will be called before paging_init(), so early_ioremap() > > > * or early_memremap() should be called here to for ACPI table mapping. > > > diff --git a/arch/riscv/kernel/acpi_numa.c b/arch/riscv/kernel/acpi_numa.c > > > new file mode 100644 > > > index 000000000000..0231482d6946 > > > --- /dev/null > > > +++ b/arch/riscv/kernel/acpi_numa.c > > > @@ -0,0 +1,131 @@ > > > +// SPDX-License-Identifier: GPL-2.0 > > > +/* > > > + * ACPI 6.6 based NUMA setup for RISCV > > > + * Lots of code was borrowed from arch/arm64/kernel/acpi_numa.c > > > + * > > > + * Copyright 2004 Andi Kleen, SuSE Labs. > > > + * Copyright (C) 2013-2016, Linaro Ltd. > > > + * Author: Hanjun Guo <hanjun.guo@linaro.org> > > > + * Copyright (C) 2024 Intel Corporation. > > > + * > > > + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. > > > + * > > > + * Called from acpi_numa_init while reading the SRAT and SLIT tables. > > > + * Assumes all memory regions belonging to a single proximity domain > > > + * are in one chunk. Holes between them will be included in the node. > > > + */ > > > + > > > +#define pr_fmt(fmt) "ACPI: NUMA: " fmt > > > + > > > +#include <linux/acpi.h> > > > +#include <linux/bitmap.h> > > > +#include <linux/kernel.h> > > > +#include <linux/mm.h> > > > +#include <linux/memblock.h> > > > +#include <linux/mmzone.h> > > > +#include <linux/module.h> > > > +#include <linux/topology.h> > > > + > > > +#include <asm/numa.h> > > > + > > > +static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE }; > > > > This only sets acpi_early_node_map[0] to NUMA_NO_NODE. Assuming we want > > to ensure all of them are initialized to NUMA_NO_NODE, then we need > > > > static int acpi_early_node_map[NR_CPUS] __initdata = { [0 ... NR_CPUS - 1] = NUMA_NO_NODE }; > > > > Good catch! Thanks! > > @Palmer Dabbelt > I noticed this series had been merged to riscv/linux.git (for-next), > could you help include the above change from Drew? > Or shall I send out a new series? Since it's already in for-next, I suggest having a Fixes patch and add that to for-next because for-next is supposed to have a stable commit history. Regards, Anup
On Tue, Jul 23, 2024 at 10:50 PM Anup Patel <apatel@ventanamicro.com> wrote: > > On Tue, Jul 23, 2024 at 7:51 PM Haibo Xu <xiaobo55x@gmail.com> wrote: > > > > On Tue, Jul 23, 2024 at 9:30 PM Andrew Jones <ajones@ventanamicro.com> wrote: > > > > > > On Thu, Jun 13, 2024 at 04:54:33PM GMT, Haibo Xu wrote: > > > > Add acpi_numa.c file to enable parse NUMA information from > > > > ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and > > > > memory nodes to proximity domain mapping, while SLIT table > > > > provide the distance metrics between proximity domains. > > > > > > > > Signed-off-by: Haibo Xu <haibo1.xu@intel.com> > > > > Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> > > > > --- > > > > arch/riscv/include/asm/acpi.h | 15 +++- > > > > arch/riscv/kernel/Makefile | 1 + > > > > arch/riscv/kernel/acpi.c | 5 -- > > > > arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++ > > > > arch/riscv/kernel/setup.c | 4 +- > > > > arch/riscv/kernel/smpboot.c | 2 - > > > > include/linux/acpi.h | 6 ++ > > > > 7 files changed, 154 insertions(+), 10 deletions(-) > > > > create mode 100644 arch/riscv/kernel/acpi_numa.c > > > > > > > > diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h > > > > index 7dad0cf9d701..e0a1f84404f3 100644 > > > > --- a/arch/riscv/include/asm/acpi.h > > > > +++ b/arch/riscv/include/asm/acpi.h > > > > @@ -61,11 +61,14 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) { } > > > > > > > > void acpi_init_rintc_map(void); > > > > struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu); > > > > -u32 get_acpi_id_for_cpu(int cpu); > > > > +static inline u32 get_acpi_id_for_cpu(int cpu) > > > > +{ > > > > + return acpi_cpu_get_madt_rintc(cpu)->uid; > > > > +} > > > > + > > > > int acpi_get_riscv_isa(struct acpi_table_header *table, > > > > unsigned int cpu, const char **isa); > > > > > > > > -static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } > > > > void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size, > > > > u32 *cboz_size, u32 *cbop_size); > > > > #else > > > > @@ -87,4 +90,12 @@ static inline void acpi_get_cbo_block_size(struct acpi_table_header *table, > > > > > > > > #endif /* CONFIG_ACPI */ > > > > > > > > +#ifdef CONFIG_ACPI_NUMA > > > > +int acpi_numa_get_nid(unsigned int cpu); > > > > +void acpi_map_cpus_to_nodes(void); > > > > +#else > > > > +static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } > > > > +static inline void acpi_map_cpus_to_nodes(void) { } > > > > +#endif /* CONFIG_ACPI_NUMA */ > > > > + > > > > #endif /*_ASM_ACPI_H*/ > > > > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile > > > > index 5b243d46f4b1..1e2afec141b5 100644 > > > > --- a/arch/riscv/kernel/Makefile > > > > +++ b/arch/riscv/kernel/Makefile > > > > @@ -110,3 +110,4 @@ obj-$(CONFIG_COMPAT) += compat_vdso/ > > > > > > > > obj-$(CONFIG_64BIT) += pi/ > > > > obj-$(CONFIG_ACPI) += acpi.o > > > > +obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o > > > > diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c > > > > index e619edc8b0cc..040bdbfea2b4 100644 > > > > --- a/arch/riscv/kernel/acpi.c > > > > +++ b/arch/riscv/kernel/acpi.c > > > > @@ -191,11 +191,6 @@ struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu) > > > > return &cpu_madt_rintc[cpu]; > > > > } > > > > > > > > -u32 get_acpi_id_for_cpu(int cpu) > > > > -{ > > > > - return acpi_cpu_get_madt_rintc(cpu)->uid; > > > > -} > > > > - > > > > /* > > > > * __acpi_map_table() will be called before paging_init(), so early_ioremap() > > > > * or early_memremap() should be called here to for ACPI table mapping. > > > > diff --git a/arch/riscv/kernel/acpi_numa.c b/arch/riscv/kernel/acpi_numa.c > > > > new file mode 100644 > > > > index 000000000000..0231482d6946 > > > > --- /dev/null > > > > +++ b/arch/riscv/kernel/acpi_numa.c > > > > @@ -0,0 +1,131 @@ > > > > +// SPDX-License-Identifier: GPL-2.0 > > > > +/* > > > > + * ACPI 6.6 based NUMA setup for RISCV > > > > + * Lots of code was borrowed from arch/arm64/kernel/acpi_numa.c > > > > + * > > > > + * Copyright 2004 Andi Kleen, SuSE Labs. > > > > + * Copyright (C) 2013-2016, Linaro Ltd. > > > > + * Author: Hanjun Guo <hanjun.guo@linaro.org> > > > > + * Copyright (C) 2024 Intel Corporation. > > > > + * > > > > + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. > > > > + * > > > > + * Called from acpi_numa_init while reading the SRAT and SLIT tables. > > > > + * Assumes all memory regions belonging to a single proximity domain > > > > + * are in one chunk. Holes between them will be included in the node. > > > > + */ > > > > + > > > > +#define pr_fmt(fmt) "ACPI: NUMA: " fmt > > > > + > > > > +#include <linux/acpi.h> > > > > +#include <linux/bitmap.h> > > > > +#include <linux/kernel.h> > > > > +#include <linux/mm.h> > > > > +#include <linux/memblock.h> > > > > +#include <linux/mmzone.h> > > > > +#include <linux/module.h> > > > > +#include <linux/topology.h> > > > > + > > > > +#include <asm/numa.h> > > > > + > > > > +static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE }; > > > > > > This only sets acpi_early_node_map[0] to NUMA_NO_NODE. Assuming we want > > > to ensure all of them are initialized to NUMA_NO_NODE, then we need > > > > > > static int acpi_early_node_map[NR_CPUS] __initdata = { [0 ... NR_CPUS - 1] = NUMA_NO_NODE }; > > > > > > > Good catch! Thanks! > > > > @Palmer Dabbelt > > I noticed this series had been merged to riscv/linux.git (for-next), > > could you help include the above change from Drew? > > Or shall I send out a new series? > > Since it's already in for-next, I suggest having a Fixes > patch and add that to for-next because for-next is supposed > to have a stable commit history. > Ok, I will send out the fix soon! Thanks! > Regards, > Anup
diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h index 7dad0cf9d701..e0a1f84404f3 100644 --- a/arch/riscv/include/asm/acpi.h +++ b/arch/riscv/include/asm/acpi.h @@ -61,11 +61,14 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) { } void acpi_init_rintc_map(void); struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu); -u32 get_acpi_id_for_cpu(int cpu); +static inline u32 get_acpi_id_for_cpu(int cpu) +{ + return acpi_cpu_get_madt_rintc(cpu)->uid; +} + int acpi_get_riscv_isa(struct acpi_table_header *table, unsigned int cpu, const char **isa); -static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size, u32 *cboz_size, u32 *cbop_size); #else @@ -87,4 +90,12 @@ static inline void acpi_get_cbo_block_size(struct acpi_table_header *table, #endif /* CONFIG_ACPI */ +#ifdef CONFIG_ACPI_NUMA +int acpi_numa_get_nid(unsigned int cpu); +void acpi_map_cpus_to_nodes(void); +#else +static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } +static inline void acpi_map_cpus_to_nodes(void) { } +#endif /* CONFIG_ACPI_NUMA */ + #endif /*_ASM_ACPI_H*/ diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile index 5b243d46f4b1..1e2afec141b5 100644 --- a/arch/riscv/kernel/Makefile +++ b/arch/riscv/kernel/Makefile @@ -110,3 +110,4 @@ obj-$(CONFIG_COMPAT) += compat_vdso/ obj-$(CONFIG_64BIT) += pi/ obj-$(CONFIG_ACPI) += acpi.o +obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c index e619edc8b0cc..040bdbfea2b4 100644 --- a/arch/riscv/kernel/acpi.c +++ b/arch/riscv/kernel/acpi.c @@ -191,11 +191,6 @@ struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu) return &cpu_madt_rintc[cpu]; } -u32 get_acpi_id_for_cpu(int cpu) -{ - return acpi_cpu_get_madt_rintc(cpu)->uid; -} - /* * __acpi_map_table() will be called before paging_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping. diff --git a/arch/riscv/kernel/acpi_numa.c b/arch/riscv/kernel/acpi_numa.c new file mode 100644 index 000000000000..0231482d6946 --- /dev/null +++ b/arch/riscv/kernel/acpi_numa.c @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ACPI 6.6 based NUMA setup for RISCV + * Lots of code was borrowed from arch/arm64/kernel/acpi_numa.c + * + * Copyright 2004 Andi Kleen, SuSE Labs. + * Copyright (C) 2013-2016, Linaro Ltd. + * Author: Hanjun Guo <hanjun.guo@linaro.org> + * Copyright (C) 2024 Intel Corporation. + * + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. + * + * Called from acpi_numa_init while reading the SRAT and SLIT tables. + * Assumes all memory regions belonging to a single proximity domain + * are in one chunk. Holes between them will be included in the node. + */ + +#define pr_fmt(fmt) "ACPI: NUMA: " fmt + +#include <linux/acpi.h> +#include <linux/bitmap.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/memblock.h> +#include <linux/mmzone.h> +#include <linux/module.h> +#include <linux/topology.h> + +#include <asm/numa.h> + +static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE }; + +int __init acpi_numa_get_nid(unsigned int cpu) +{ + return acpi_early_node_map[cpu]; +} + +static inline int get_cpu_for_acpi_id(u32 uid) +{ + int cpu; + + for (cpu = 0; cpu < nr_cpu_ids; cpu++) + if (uid == get_acpi_id_for_cpu(cpu)) + return cpu; + + return -EINVAL; +} + +static int __init acpi_parse_rintc_pxm(union acpi_subtable_headers *header, + const unsigned long end) +{ + struct acpi_srat_rintc_affinity *pa; + int cpu, pxm, node; + + if (srat_disabled()) + return -EINVAL; + + pa = (struct acpi_srat_rintc_affinity *)header; + if (!pa) + return -EINVAL; + + if (!(pa->flags & ACPI_SRAT_RINTC_ENABLED)) + return 0; + + pxm = pa->proximity_domain; + node = pxm_to_node(pxm); + + /* + * If we can't map the UID to a logical cpu this + * means that the UID is not part of possible cpus + * so we do not need a NUMA mapping for it, skip + * the SRAT entry and keep parsing. + */ + cpu = get_cpu_for_acpi_id(pa->acpi_processor_uid); + if (cpu < 0) + return 0; + + acpi_early_node_map[cpu] = node; + pr_info("SRAT: PXM %d -> HARTID 0x%lx -> Node %d\n", pxm, + cpuid_to_hartid_map(cpu), node); + + return 0; +} + +void __init acpi_map_cpus_to_nodes(void) +{ + int i; + + /* + * In ACPI, SMP and CPU NUMA information is provided in separate + * static tables, namely the MADT and the SRAT. + * + * Thus, it is simpler to first create the cpu logical map through + * an MADT walk and then map the logical cpus to their node ids + * as separate steps. + */ + acpi_table_parse_entries(ACPI_SIG_SRAT, sizeof(struct acpi_table_srat), + ACPI_SRAT_TYPE_RINTC_AFFINITY, acpi_parse_rintc_pxm, 0); + + for (i = 0; i < nr_cpu_ids; i++) + early_map_cpu_to_node(i, acpi_numa_get_nid(i)); +} + +/* Callback for Proximity Domain -> logical node ID mapping */ +void __init acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa) +{ + int pxm, node; + + if (srat_disabled()) + return; + + if (pa->header.length < sizeof(struct acpi_srat_rintc_affinity)) { + pr_err("SRAT: Invalid SRAT header length: %d\n", pa->header.length); + bad_srat(); + return; + } + + if (!(pa->flags & ACPI_SRAT_RINTC_ENABLED)) + return; + + pxm = pa->proximity_domain; + node = acpi_map_pxm_to_node(pxm); + + if (node == NUMA_NO_NODE) { + pr_err("SRAT: Too many proximity domains %d\n", pxm); + bad_srat(); + return; + } + + node_set(node, numa_nodes_parsed); +} diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index 4f73c0ae44b2..a2cde65b69e9 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -281,8 +281,10 @@ void __init setup_arch(char **cmdline_p) setup_smp(); #endif - if (!acpi_disabled) + if (!acpi_disabled) { acpi_init_rintc_map(); + acpi_map_cpus_to_nodes(); + } riscv_init_cbo_blocksizes(); riscv_fill_hwcap(); diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c index 19baf0d574d3..0f8f1c95ac38 100644 --- a/arch/riscv/kernel/smpboot.c +++ b/arch/riscv/kernel/smpboot.c @@ -96,7 +96,6 @@ static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const un if (hart == cpuid_to_hartid_map(0)) { BUG_ON(found_boot_cpu); found_boot_cpu = true; - early_map_cpu_to_node(0, acpi_numa_get_nid(cpu_count)); return 0; } @@ -106,7 +105,6 @@ static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const un } cpuid_to_hartid_map(cpu_count) = hart; - early_map_cpu_to_node(cpu_count, acpi_numa_get_nid(cpu_count)); cpu_count++; return 0; diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 28c3fb2bef0d..5a2b620ccd58 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -264,6 +264,12 @@ static inline void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { } #endif +#ifdef CONFIG_RISCV +void acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa); +#else +static inline void acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa) { } +#endif + #ifndef PHYS_CPUID_INVALID typedef u32 phys_cpuid_t; #define PHYS_CPUID_INVALID (phys_cpuid_t)(-1)