| Message ID | 20240731061132.703368-4-jacobe.zang@wesion.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | Add AP6275P wireless support | expand |
On July 31, 2024 8:11:58 AM Jacobe Zang <jacobe.zang@wesion.com> wrote: > Khadas Edge2 uses the PCI-e Ampak AP6275P 2T2R Wi-Fi 6 module. The > pcie@0 node can be used as Bridge1, so the wifi@0 node is used as a > device under the Bridge1. > > Co-developed-by: Muhammed Efe Cetin <efectn@protonmail.com> > Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> > Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> > --- > .../boot/dts/rockchip/rk3588s-khadas-edge2.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts > b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts > index dbddfc3bb4641..b80a552dad883 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts > @@ -283,6 +283,22 @@ &pcie2x1l2 { > reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; > vpcie3v3-supply = <&vcc3v3_pcie_wl>; > status = "okay"; > + > + pcie@0,0 { > + reg = <0x400000 0 0 0 0>; > + #address-cells = <3>; > + #size-cells = <2>; > + ranges; > + device_type = "pci"; > + bus-range = <0x40 0x4f>; > + > + wifi: wifi@0,0 { > + compatible = "pci14e4,449d"; Probably need to add "brcm,bcm4329-fmac" as well here. Regards, Arend
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts index dbddfc3bb4641..b80a552dad883 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts @@ -283,6 +283,22 @@ &pcie2x1l2 { reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie_wl>; status = "okay"; + + pcie@0,0 { + reg = <0x400000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + device_type = "pci"; + bus-range = <0x40 0x4f>; + + wifi: wifi@0,0 { + compatible = "pci14e4,449d"; + reg = <0x410000 0 0 0 0>; + clocks = <&hym8563>; + clock-names = "lpo"; + }; + }; }; &pwm11 {