diff mbox series

[v5] wifi: mt76: mt7915: add wds support when wed is enabled

Message ID TY3P286MB2611CB2F4F5FA27D782AA80A98BC2@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM (mailing list archive)
State Superseded
Delegated to: Felix Fietkau
Headers show
Series [v5] wifi: mt76: mt7915: add wds support when wed is enabled | expand

Commit Message

Shengyu Qu Aug. 3, 2024, 7:58 a.m. UTC 
The current WED only supports 256 wcid, whereas mt7986 can support up to
512 entries, so firmware provides a rule to get sta_info by DA when wcid
is set to 0x3ff by txd. Also, WED provides a register to overwrite txd
wcid, that is, wcid[9:8] can be overwritten by 0x3 and wcid[7:0] is set
to 0xff by host driver.

However, firmware is unable to get sta_info from DA as DA != RA for
4addr cases, so firmware and wifi host driver both use wcid (256 - 271)
and (768 ~ 783) for sync up to get correct sta_info.

Currently WDS+WED config is completely broken on MT7986/7981 devices if
without this patch.

Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
---
Changes since v1:
 - Drop duplicate setting in mmio
 - Reduce the patch size by redefining mt76_wcid_alloc
Changes since v2:
 - Rework wds wcid getting flow
Changes since v3:
 - Rebase to next-20240703
 - Sync with downstream patch
Changes since v4:
 - Rebase to next-20240802
---
 drivers/net/wireless/mediatek/mt76/mt76.h     |  9 +++++
 .../net/wireless/mediatek/mt76/mt7915/main.c  | 32 ++++++++++++++--
 .../net/wireless/mediatek/mt76/mt7915/mcu.c   | 16 ++++++--
 .../net/wireless/mediatek/mt76/mt7915/mcu.h   |  1 +
 drivers/net/wireless/mediatek/mt76/util.c     | 37 +++++++++++++++++--
 drivers/net/wireless/mediatek/mt76/util.h     |  7 +++-
 6 files changed, 91 insertions(+), 11 deletions(-)

Comments

kernel test robot Aug. 4, 2024, 2:43 a.m. UTC | #1 
Hi Shengyu,

kernel test robot noticed the following build errors:

[auto build test ERROR on wireless-next/main]
[also build test ERROR on wireless/main linus/master v6.11-rc1 next-20240802]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Shengyu-Qu/wifi-mt76-mt7915-add-wds-support-when-wed-is-enabled/20240803-231632
base:   https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git main
patch link:    https://lore.kernel.org/r/TY3P286MB2611CB2F4F5FA27D782AA80A98BC2%40TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
patch subject: [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
config: x86_64-buildonly-randconfig-003-20240804 (https://download.01.org/0day-ci/archive/20240804/202408041039.BqVRJOqp-lkp@intel.com/config)
compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240804/202408041039.BqVRJOqp-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202408041039.BqVRJOqp-lkp@intel.com/

All errors (new ones prefixed by >>):

   drivers/net/wireless/mediatek/mt76/mt7915/mcu.c: In function 'mt7915_mcu_init_firmware':
>> drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:2363:67: error: 'struct mtk_wed_device' has no member named 'rev_id'
    2363 |                                                 dev->mt76.mmio.wed.rev_id, 0);
         |                                                                   ^


vim +2363 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c

  2322	
  2323	int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
  2324	{
  2325		int ret;
  2326	
  2327		/* force firmware operation mode into normal state,
  2328		 * which should be set before firmware download stage.
  2329		 */
  2330		mt76_wr(dev, MT_SWDEF_MODE, MT_SWDEF_NORMAL_MODE);
  2331	
  2332		ret = mt7915_driver_own(dev, 0);
  2333		if (ret)
  2334			return ret;
  2335		/* set driver own for band1 when two hif exist */
  2336		if (dev->hif2) {
  2337			ret = mt7915_driver_own(dev, 1);
  2338			if (ret)
  2339				return ret;
  2340		}
  2341	
  2342		ret = mt7915_load_firmware(dev);
  2343		if (ret)
  2344			return ret;
  2345	
  2346		set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
  2347		ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WM, 0);
  2348		if (ret)
  2349			return ret;
  2350	
  2351		ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WA, 0);
  2352		if (ret)
  2353			return ret;
  2354	
  2355		if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
  2356			if (is_mt7915(&dev->mt76) ||
  2357			    !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
  2358				ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
  2359							0, 0, 0);
  2360			else
  2361				ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
  2362							MCU_WA_PARAM_WED_VERSION,
> 2363							dev->mt76.mmio.wed.rev_id, 0);
  2364			if (ret)
  2365				return ret;
  2366		}
  2367	
  2368		ret = mt7915_mcu_set_mwds(dev, 1);
  2369		if (ret)
  2370			return ret;
  2371	
  2372		ret = mt7915_mcu_set_muru_ctrl(dev, MURU_SET_PLATFORM_TYPE,
  2373					       MURU_PLATFORM_TYPE_PERF_LEVEL_2);
  2374		if (ret)
  2375			return ret;
  2376	
  2377		ret = mt7915_mcu_init_rx_airtime(dev);
  2378		if (ret)
  2379			return ret;
  2380	
  2381		return mt7915_mcu_set_red(dev, mtk_wed_device_active(&dev->mt76.mmio.wed));
  2382	}
  2383
Shengyu Qu Aug. 4, 2024, 9:28 a.m. UTC | #2 
This error report is a false warning. "struct mtk_wed_device" needs
"CONFIG_NET_MEDIATEK_SOC_WED" to be defined.

Best regards,
Shengyu

在 2024/8/4 10:43, kernel test robot 写道:
> Hi Shengyu,
> 
> kernel test robot noticed the following build errors:
> 
> [auto build test ERROR on wireless-next/main]
> [also build test ERROR on wireless/main linus/master v6.11-rc1 next-20240802]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
> 
> url:    https://github.com/intel-lab-lkp/linux/commits/Shengyu-Qu/wifi-mt76-mt7915-add-wds-support-when-wed-is-enabled/20240803-231632
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git main
> patch link:    https://lore.kernel.org/r/TY3P286MB2611CB2F4F5FA27D782AA80A98BC2%40TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
> patch subject: [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
> config: x86_64-buildonly-randconfig-003-20240804 (https://download.01.org/0day-ci/archive/20240804/202408041039.BqVRJOqp-lkp@intel.com/config)
> compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
> reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240804/202408041039.BqVRJOqp-lkp@intel.com/reproduce)
> 
> If you fix the issue in a separate patch/commit (i.e. not just a new version of
> the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Closes: https://lore.kernel.org/oe-kbuild-all/202408041039.BqVRJOqp-lkp@intel.com/
> 
> All errors (new ones prefixed by >>):
> 
>     drivers/net/wireless/mediatek/mt76/mt7915/mcu.c: In function 'mt7915_mcu_init_firmware':
>>> drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:2363:67: error: 'struct mtk_wed_device' has no member named 'rev_id'
>      2363 |                                                 dev->mt76.mmio.wed.rev_id, 0);
>           |                                                                   ^
> 
> 
> vim +2363 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> 
>    2322	
>    2323	int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
>    2324	{
>    2325		int ret;
>    2326	
>    2327		/* force firmware operation mode into normal state,
>    2328		 * which should be set before firmware download stage.
>    2329		 */
>    2330		mt76_wr(dev, MT_SWDEF_MODE, MT_SWDEF_NORMAL_MODE);
>    2331	
>    2332		ret = mt7915_driver_own(dev, 0);
>    2333		if (ret)
>    2334			return ret;
>    2335		/* set driver own for band1 when two hif exist */
>    2336		if (dev->hif2) {
>    2337			ret = mt7915_driver_own(dev, 1);
>    2338			if (ret)
>    2339				return ret;
>    2340		}
>    2341	
>    2342		ret = mt7915_load_firmware(dev);
>    2343		if (ret)
>    2344			return ret;
>    2345	
>    2346		set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
>    2347		ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WM, 0);
>    2348		if (ret)
>    2349			return ret;
>    2350	
>    2351		ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WA, 0);
>    2352		if (ret)
>    2353			return ret;
>    2354	
>    2355		if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
>    2356			if (is_mt7915(&dev->mt76) ||
>    2357			    !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
>    2358				ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
>    2359							0, 0, 0);
>    2360			else
>    2361				ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
>    2362							MCU_WA_PARAM_WED_VERSION,
>> 2363							dev->mt76.mmio.wed.rev_id, 0);
>    2364			if (ret)
>    2365				return ret;
>    2366		}
>    2367	
>    2368		ret = mt7915_mcu_set_mwds(dev, 1);
>    2369		if (ret)
>    2370			return ret;
>    2371	
>    2372		ret = mt7915_mcu_set_muru_ctrl(dev, MURU_SET_PLATFORM_TYPE,
>    2373					       MURU_PLATFORM_TYPE_PERF_LEVEL_2);
>    2374		if (ret)
>    2375			return ret;
>    2376	
>    2377		ret = mt7915_mcu_init_rx_airtime(dev);
>    2378		if (ret)
>    2379			return ret;
>    2380	
>    2381		return mt7915_mcu_set_red(dev, mtk_wed_device_active(&dev->mt76.mmio.wed));
>    2382	}
>    2383	
>
Kalle Valo Aug. 4, 2024, 9:56 a.m. UTC | #3 
Shengyu Qu <wiagn233@outlook.com> writes:

> This error report is a false warning. "struct mtk_wed_device" needs
> "CONFIG_NET_MEDIATEK_SOC_WED" to be defined.

I didn't investigate anything but based on your description that sounds
wrong. The code should should not be compiled if it depends on
CONFIG_NET_MEDIATEK_SOC_WED but that's not set. We have zero rule for
compilation errors or warnings.
Shengyu Qu Aug. 4, 2024, 12:17 p.m. UTC | #4 
You are right. I'm thinking about changing the code like this:

#ifdef CONFIG_NET_MEDIATEK_SOC_WED
	if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
		if (is_mt7915(&dev->mt76) ||
		    !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
			ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
						0, 0, 0);
		else
			ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
						MCU_WA_PARAM_WED_VERSION,
						dev->mt76.mmio.wed.rev_id, 0);
		if (ret)
			return ret;
	}
#endif

Do you think this is ok?

Best regards,
Shengyu

在 2024/8/4 17:56, Kalle Valo 写道:
> Shengyu Qu <wiagn233@outlook.com> writes:
> 
>> This error report is a false warning. "struct mtk_wed_device" needs
>> "CONFIG_NET_MEDIATEK_SOC_WED" to be defined.
> 
> I didn't investigate anything but based on your description that sounds
> wrong. The code should should not be compiled if it depends on
> CONFIG_NET_MEDIATEK_SOC_WED but that's not set. We have zero rule for
> compilation errors or warnings.
>
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 4a58a78d5ed25..1186a4998faff 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -28,6 +28,9 @@ 
 
 #define MT76_TOKEN_FREE_THR	64
 
+#define MT76_WED_WDS_MIN    256
+#define MT76_WED_WDS_MAX    272
+
 #define MT_QFLAG_WED_RING	GENMASK(1, 0)
 #define MT_QFLAG_WED_TYPE	GENMASK(4, 2)
 #define MT_QFLAG_WED		BIT(5)
@@ -71,6 +74,12 @@  enum mt76_wed_type {
 	MT76_WED_RRO_Q_IND,
 };
 
+enum mt76_wed_state {
+	MT76_WED_DEFAULT,
+	MT76_WED_ACTIVE,
+	MT76_WED_WDS_ACTIVE,
+};
+
 struct mt76_bus_ops {
 	u32 (*rr)(struct mt76_dev *dev, u32 offset);
 	void (*wr)(struct mt76_dev *dev, u32 offset, u32 val);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 049223df9beb1..dc4d87e004a0f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -745,8 +745,15 @@  int mt7915_mac_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
 	bool ext_phy = mvif->phy != &dev->phy;
 	int ret, idx;
 	u32 addr;
+	u8 flags = MT76_WED_DEFAULT;
 
-	idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7915_WTBL_STA);
+	if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
+	    !is_mt7915(&dev->mt76)) {
+		flags = test_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags) ?
+		       MT76_WED_WDS_ACTIVE : MT76_WED_ACTIVE;
+	}
+
+	idx = __mt76_wcid_alloc(mdev->wcid_mask, MT7915_WTBL_STA, flags);
 	if (idx < 0)
 		return -ENOSPC;
 
@@ -1201,12 +1208,27 @@  static void mt7915_sta_set_4addr(struct ieee80211_hw *hw,
 {
 	struct mt7915_dev *dev = mt7915_hw_dev(hw);
 	struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
+	int min = MT76_WED_WDS_MIN, max = MT76_WED_WDS_MAX;
 
 	if (enabled)
 		set_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags);
 	else
 		clear_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags);
 
+	if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
+	    !is_mt7915(&dev->mt76) &&
+	    (msta->wcid.idx < min || msta->wcid.idx > max - 1)) {
+		struct ieee80211_sta *pre_sta;
+
+		pre_sta = kzalloc(sizeof(*sta) + sizeof(*msta), GFP_KERNEL);
+		mt76_sta_pre_rcu_remove(hw, vif, sta);
+		memmove(pre_sta, sta, sizeof(*sta) + sizeof(*msta));
+		mt7915_sta_add(hw, vif, sta);
+		synchronize_rcu();
+		mt7915_sta_remove(hw, vif, pre_sta);
+		kfree(pre_sta);
+	}
+
 	mt76_connac_mcu_wtbl_update_hdr_trans(&dev->mt76, vif, sta);
 }
 
@@ -1644,15 +1666,19 @@  mt7915_net_fill_forward_path(struct ieee80211_hw *hw,
 	if (!mtk_wed_device_active(wed))
 		return -ENODEV;
 
-	if (msta->wcid.idx > 0xff)
+	if (msta->wcid.idx > MT7915_WTBL_STA)
 		return -EIO;
 
 	path->type = DEV_PATH_MTK_WDMA;
 	path->dev = ctx->dev;
 	path->mtk_wdma.wdma_idx = wed->wdma_idx;
 	path->mtk_wdma.bss = mvif->mt76.idx;
-	path->mtk_wdma.wcid = is_mt7915(&dev->mt76) ? msta->wcid.idx : 0x3ff;
 	path->mtk_wdma.queue = phy != &dev->phy;
+	if (test_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags) ||
+	    is_mt7915(&dev->mt76))
+		path->mtk_wdma.wcid = msta->wcid.idx;
+	else
+		path->mtk_wdma.wcid = 0x3ff;
 
 	ctx->dev = NULL;
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 2185cd24e2e1c..0f715a4c21ada 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2352,10 +2352,18 @@  int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
 	if (ret)
 		return ret;
 
-	if ((mtk_wed_device_active(&dev->mt76.mmio.wed) &&
-	     is_mt7915(&dev->mt76)) ||
-	    !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
-		mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0, 0, 0);
+	if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
+		if (is_mt7915(&dev->mt76) ||
+		    !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
+			ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
+						0, 0, 0);
+		else
+			ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
+						MCU_WA_PARAM_WED_VERSION,
+						dev->mt76.mmio.wed.rev_id, 0);
+		if (ret)
+			return ret;
+	}
 
 	ret = mt7915_mcu_set_mwds(dev, 1);
 	if (ret)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
index b41ac4aaced7f..b2bf5472b2d70 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
@@ -279,6 +279,7 @@  enum {
 	MCU_WA_PARAM_CPU_UTIL = 0x0b,
 	MCU_WA_PARAM_RED = 0x0e,
 	MCU_WA_PARAM_RED_SETTING = 0x40,
+	MCU_WA_PARAM_WED_VERSION = 0x32,
 };
 
 enum mcu_mmps_mode {
diff --git a/drivers/net/wireless/mediatek/mt76/util.c b/drivers/net/wireless/mediatek/mt76/util.c
index d6c01a2dd1988..461b74068fc30 100644
--- a/drivers/net/wireless/mediatek/mt76/util.c
+++ b/drivers/net/wireless/mediatek/mt76/util.c
@@ -42,9 +42,11 @@  bool ____mt76_poll_msec(struct mt76_dev *dev, u32 offset, u32 mask, u32 val,
 }
 EXPORT_SYMBOL_GPL(____mt76_poll_msec);
 
-int mt76_wcid_alloc(u32 *mask, int size)
+int __mt76_wcid_alloc(u32 *mask, int size, u8 flag)
 {
 	int i, idx = 0, cur;
+	int min = MT76_WED_WDS_MIN;
+	int max = MT76_WED_WDS_MAX;
 
 	for (i = 0; i < DIV_ROUND_UP(size, 32); i++) {
 		idx = ffs(~mask[i]);
@@ -53,16 +55,45 @@  int mt76_wcid_alloc(u32 *mask, int size)
 
 		idx--;
 		cur = i * 32 + idx;
-		if (cur >= size)
+
+		switch (flag) {
+		case MT76_WED_ACTIVE:
+			if (cur >= min && cur < max)
+				continue;
+
+			if (cur >= size) {
+				u32 end = max - min - 1;
+
+				i = min / 32;
+				idx = ffs(~mask[i] & GENMASK(end, 0));
+				if (!idx)
+					goto error;
+				idx--;
+				cur = min + idx;
+			}
+
 			break;
+		case MT76_WED_WDS_ACTIVE:
+			if (cur < min)
+				continue;
+			if (cur >= max)
+				goto error;
+
+			break;
+		default:
+			if (cur >= size)
+				goto error;
+			break;
+		}
 
 		mask[i] |= BIT(idx);
 		return cur;
 	}
 
+error:
 	return -1;
 }
-EXPORT_SYMBOL_GPL(mt76_wcid_alloc);
+EXPORT_SYMBOL_GPL(__mt76_wcid_alloc);
 
 int mt76_get_min_avg_rssi(struct mt76_dev *dev, bool ext_phy)
 {
diff --git a/drivers/net/wireless/mediatek/mt76/util.h b/drivers/net/wireless/mediatek/mt76/util.h
index 260965dde94cf..99b7263c0a205 100644
--- a/drivers/net/wireless/mediatek/mt76/util.h
+++ b/drivers/net/wireless/mediatek/mt76/util.h
@@ -27,7 +27,12 @@  enum {
 #define MT76_INCR(_var, _size) \
 	(_var = (((_var) + 1) % (_size)))
 
-int mt76_wcid_alloc(u32 *mask, int size);
+int __mt76_wcid_alloc(u32 *mask, int size, u8 flags);
+
+static inline int mt76_wcid_alloc(u32 *mask, int size)
+{
+	return __mt76_wcid_alloc(mask, size, 0);
+}
 
 static inline void
 mt76_wcid_mask_set(u32 *mask, int idx)