| Message ID | 20240810035141.439024-5-jacobe.zang@wesion.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | Add AP6275P wireless support | expand |
> -----Original Message----- > From: Jacobe Zang <jacobe.zang@wesion.com> > Sent: Saturday, August 10, 2024 9:22 AM > To: robh@kernel.org; krzk+dt@kernel.org; heiko@sntech.de; > kvalo@kernel.org; davem@davemloft.net; edumazet@google.com; > kuba@kernel.org; pabeni@redhat.com; conor+dt@kernel.org; > arend.vanspriel@broadcom.com > Cc: efectn@protonmail.com; dsimic@manjaro.org; jagan@edgeble.ai; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > rockchip@lists.infradead.org; linux-kernel@vger.kernel.org; > arend@broadcom.com; linux-wireless@vger.kernel.org; > netdev@vger.kernel.org; megi@xff.cz; duoming@zju.edu.cn; > bhelgaas@google.com; minipli@grsecurity.net; brcm80211@lists.linux.dev; > brcm80211-dev-list.pdl@broadcom.com; nick@khadas.com; Jacobe Zang > <jacobe.zang@wesion.com> > Subject: [PATCH v9 4/5] wifi: brcmfmac: Add optional lpo clock > enable support > > WiFi modules often require 32kHz clock to function. Add support to enable > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the top of > brcmf_of_probe. Change function prototypes from void to int and add > appropriate errno's for return > WiFi modules often require 32kHz clock to function. Add support to enable > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the top of > brcmf_of_probe. Change function prototypes from void to int and add > appropriate errno's for return values that will be send to bus when error > occurred. > > Co-developed-by: Ondrej Jirman <megi@xff.cz> > Signed-off-by: Ondrej Jirman <megi@xff.cz> > Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com> > Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> > Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> > --- > .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 +- > .../broadcom/brcm80211/brcmfmac/common.c | 3 +- > .../wireless/broadcom/brcm80211/brcmfmac/of.c | 53 +++++++++++-------- > .../wireless/broadcom/brcm80211/brcmfmac/of.h | 9 ++-- > .../broadcom/brcm80211/brcmfmac/pcie.c | 3 ++ > .../broadcom/brcm80211/brcmfmac/sdio.c | 24 ++++++--- > .../broadcom/brcm80211/brcmfmac/usb.c | 3 ++ > 7 files changed, 63 insertions(+), 36 deletions(-) > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > index 13391c2d82aae..b2ede4e579c5c 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > @@ -947,8 +947,8 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev > *sdiodev) > > /* try to attach to the target device */ > sdiodev->bus = brcmf_sdio_probe(sdiodev); > - if (!sdiodev->bus) { > - ret = -ENODEV; > + if (IS_ERR(sdiodev->bus)) { > + ret = PTR_ERR(sdiodev->bus); > goto out; > } > brcmf_sdiod_host_fixup(sdiodev->func2->card->host); > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c > index b24faae35873d..58d50918dd177 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c > @@ -561,7 +561,8 @@ struct brcmf_mp_device > *brcmf_get_module_param(struct device *dev, > if (!found) { > /* No platform data for this device, try OF and DMI data */ > brcmf_dmi_probe(settings, chip, chiprev); > - brcmf_of_probe(dev, bus_type, settings); > + if (brcmf_of_probe(dev, bus_type, settings) == - > EPROBE_DEFER) > + return ERR_PTR(-EPROBE_DEFER); > brcmf_acpi_probe(dev, bus_type, settings); > } > return settings; > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > index e406e11481a62..f19dc7355e0e8 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > @@ -6,6 +6,7 @@ > #include <linux/of.h> > #include <linux/of_irq.h> > #include <linux/of_net.h> > +#include <linux/clk.h> > > #include <defs.h> > #include "debug.h" > @@ -65,17 +66,21 @@ static int brcmf_of_get_country_codes(struct device > *dev, > return 0; > } > > -void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, > - struct brcmf_mp_device *settings) > +int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, > + struct brcmf_mp_device *settings) > { > struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio; > struct device_node *root, *np = dev->of_node; > + struct clk *clk; > const char *prop; Small nit, please check if reverse x-mas tree order need to be follow here. > int irq; > int err; > u32 irqf; > u32 val; > > + if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac")) > + return 0; > + > /* Apple ARM64 platforms have their own idea of board type, passed > in > * via the device tree. They also have an antenna SKU parameter > */ > @@ -105,7 +110,7 @@ void brcmf_of_probe(struct device *dev, enum > brcmf_bus_type bus_type, > board_type = devm_kstrdup(dev, tmp, GFP_KERNEL); > if (!board_type) { > of_node_put(root); > - return; > + return 0; > } > strreplace(board_type, '/', '-'); > settings->board_type = board_type; > @@ -113,33 +118,39 @@ void brcmf_of_probe(struct device *dev, enum > brcmf_bus_type bus_type, > of_node_put(root); > } > > - if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac")) > - return; > - > err = brcmf_of_get_country_codes(dev, settings); > if (err) > brcmf_err("failed to get OF country code map (err=%d)\n", > err); > > of_get_mac_address(np, settings->mac); > > - if (bus_type != BRCMF_BUSTYPE_SDIO) > - return; > + if (bus_type == BRCMF_BUSTYPE_SDIO) { > + if (of_property_read_u32(np, "brcm,drive-strength", &val) == > 0) > + sdio->drive_strength = val; > > - if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) > - sdio->drive_strength = val; > + /* make sure there are interrupts defined in the node */ > + if (!of_property_present(np, "interrupts")) > + return 0; > > - /* make sure there are interrupts defined in the node */ > - if (!of_property_present(np, "interrupts")) > - return; > + irq = irq_of_parse_and_map(np, 0); > + if (!irq) { > + brcmf_err("interrupt could not be mapped\n"); > + return 0; > + } > + irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); > + > + sdio->oob_irq_supported = true; > + sdio->oob_irq_nr = irq; > + sdio->oob_irq_flags = irqf; > + } > > - irq = irq_of_parse_and_map(np, 0); > - if (!irq) { > - brcmf_err("interrupt could not be mapped\n"); > - return; > + clk = devm_clk_get_optional_enabled(dev, "lpo"); > + if (!IS_ERR_OR_NULL(clk)) { > + brcmf_dbg(INFO, "enabling 32kHz clock\n"); > + return clk_set_rate(clk, 32768); > + } else { > + return PTR_ERR_OR_ZERO(clk); > } > - irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); > > - sdio->oob_irq_supported = true; > - sdio->oob_irq_nr = irq; > - sdio->oob_irq_flags = irqf; > + return 0; .... .... > /* Detach and free everything */ > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c > index 9a105e6debe1f..f7db46ae44906 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c > @@ -1272,6 +1272,9 @@ static int brcmf_usb_probe_cb(struct > brcmf_usbdev_info *devinfo, > ret = -ENOMEM; > goto fail; > } > + ret = PTR_ERR_OR_ZERO(devinfo->settings); > + if (ret < 0) > + goto fail; > > if (!brcmf_usb_dlneeded(devinfo)) { > ret = brcmf_alloc(devinfo->dev, devinfo->settings); > -- > 2.34.1 > Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
On 2024/8/10 17:44, Sai Krishna Gajula <saikrishnag@marvell.com> wrote: > > > -----Original Message----- > > From: Jacobe Zang <jacobe.zang@wesion.com> > > Sent: Saturday, August 10, 2024 9:22 AM > > To: robh@kernel.org; krzk+dt@kernel.org; heiko@sntech.de; > > kvalo@kernel.org; davem@davemloft.net; edumazet@google.com; > > kuba@kernel.org; pabeni@redhat.com; conor+dt@kernel.org; > > arend.vanspriel@broadcom.com > > Cc: efectn@protonmail.com; dsimic@manjaro.org; jagan@edgeble.ai; > > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > > rockchip@lists.infradead.org; linux-kernel@vger.kernel.org; > > arend@broadcom.com; linux-wireless@vger.kernel.org; > > netdev@vger.kernel.org; megi@xff.cz; duoming@zju.edu.cn; > > bhelgaas@google.com; minipli@grsecurity.net; brcm80211@lists.linux.dev; > > brcm80211-dev-list.pdl@broadcom.com; nick@khadas.com; Jacobe Zang > > <jacobe.zang@wesion.com> > > Subject: [PATCH v9 4/5] wifi: brcmfmac: Add optional lpo clock > > enable support > > > > WiFi modules often require 32kHz clock to function. Add support to enable > > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the top of > > brcmf_of_probe. Change function prototypes from void to int and add > > appropriate errno's for return > > WiFi modules often require 32kHz clock to function. Add support to enable > > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the top of > > brcmf_of_probe. Change function prototypes from void to int and add > > appropriate errno's for return values that will be send to bus when error > > occurred. > > > > Co-developed-by: Ondrej Jirman <megi@xff.cz> > > Signed-off-by: Ondrej Jirman <megi@xff.cz> > > Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com> > > Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> > > Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> > > --- > > .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 +- > > .../broadcom/brcm80211/brcmfmac/common.c | 3 +- > > .../wireless/broadcom/brcm80211/brcmfmac/of.c | 53 +++++++++++-------- > > .../wireless/broadcom/brcm80211/brcmfmac/of.h | 9 ++-- > > .../broadcom/brcm80211/brcmfmac/pcie.c | 3 ++ > > .../broadcom/brcm80211/brcmfmac/sdio.c | 24 ++++++--- > > .../broadcom/brcm80211/brcmfmac/usb.c | 3 ++ > > 7 files changed, 63 insertions(+), 36 deletions(-) > > > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > > index 13391c2d82aae..b2ede4e579c5c 100644 > > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c > > @@ -947,8 +947,8 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev > > *sdiodev) > > > > /* try to attach to the target device */ > > sdiodev->bus = brcmf_sdio_probe(sdiodev); > > - if (!sdiodev->bus) { > > - ret = -ENODEV; > > + if (IS_ERR(sdiodev->bus)) { > > + ret = PTR_ERR(sdiodev->bus); > > goto out; > > } > > brcmf_sdiod_host_fixup(sdiodev->func2->card->host); > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c > > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c > > index b24faae35873d..58d50918dd177 100644 > > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c > > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c > > @@ -561,7 +561,8 @@ struct brcmf_mp_device > > *brcmf_get_module_param(struct device *dev, > > if (!found) { > > /* No platform data for this device, try OF and DMI data */ > > brcmf_dmi_probe(settings, chip, chiprev); > > - brcmf_of_probe(dev, bus_type, settings); > > + if (brcmf_of_probe(dev, bus_type, settings) == - > > EPROBE_DEFER) > > + return ERR_PTR(-EPROBE_DEFER); > > brcmf_acpi_probe(dev, bus_type, settings); > > } > > return settings; > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > > index e406e11481a62..f19dc7355e0e8 100644 > > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > > @@ -6,6 +6,7 @@ > > #include <linux/of.h> > > #include <linux/of_irq.h> > > #include <linux/of_net.h> > > +#include <linux/clk.h> > > > > #include <defs.h> > > #include "debug.h" > > @@ -65,17 +66,21 @@ static int brcmf_of_get_country_codes(struct device > > *dev, > > return 0; > > } > > > > -void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, > > - struct brcmf_mp_device *settings) > > +int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, > > + struct brcmf_mp_device *settings) > > { > > struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio; > > struct device_node *root, *np = dev->of_node; > > + struct clk *clk; > > const char *prop; > > Small nit, please check if reverse x-mas tree order need to be follow here. > > > int irq; > > int err; > > u32 irqf; It can be seen from this line that there should be no need to follow the reverse x-mas tree order. Because it is a struct variable, so place with other struct ones. > > u32 val; > > > > + if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac")) > > + return 0; > > + > > /* Apple ARM64 platforms have their own idea of board type, passed > > in > > * via the device tree. They also have an antenna SKU parameter > > */ > > @@ -105,7 +110,7 @@ void brcmf_of_probe(struct device *dev, enum > > brcmf_bus_type bus_type, > > board_type = devm_kstrdup(dev, tmp, GFP_KERNEL); > > if (!board_type) { > > of_node_put(root); > > - return; > > + return 0; > > } > > strreplace(board_type, '/', '-'); > > settings->board_type = board_type; > > @@ -113,33 +118,39 @@ void brcmf_of_probe(struct device *dev, enum > > brcmf_bus_type bus_type, > > of_node_put(root); > > } > > > > - if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac")) > > - return; > > - > > err = brcmf_of_get_country_codes(dev, settings); > > if (err) > > brcmf_err("failed to get OF country code map (err=%d)\n", > > err); > > > > of_get_mac_address(np, settings->mac); > > > > - if (bus_type != BRCMF_BUSTYPE_SDIO) > > - return; > > + if (bus_type == BRCMF_BUSTYPE_SDIO) { > > + if (of_property_read_u32(np, "brcm,drive-strength", &val) == > > 0) > > + sdio->drive_strength = val; > > > > - if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) > > - sdio->drive_strength = val; > > + /* make sure there are interrupts defined in the node */ > > + if (!of_property_present(np, "interrupts")) > > + return 0; > > > > - /* make sure there are interrupts defined in the node */ > > - if (!of_property_present(np, "interrupts")) > > - return; > > + irq = irq_of_parse_and_map(np, 0); > > + if (!irq) { > > + brcmf_err("interrupt could not be mapped\n"); > > + return 0; > > + } > > + irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); > > + > > + sdio->oob_irq_supported = true; > > + sdio->oob_irq_nr = irq; > > + sdio->oob_irq_flags = irqf; > > + } > > > > - irq = irq_of_parse_and_map(np, 0); > > - if (!irq) { > > - brcmf_err("interrupt could not be mapped\n"); > > - return; > > + clk = devm_clk_get_optional_enabled(dev, "lpo"); > > + if (!IS_ERR_OR_NULL(clk)) { > > + brcmf_dbg(INFO, "enabling 32kHz clock\n"); > > + return clk_set_rate(clk, 32768); > > + } else { > > + return PTR_ERR_OR_ZERO(clk); > > } > > - irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); > > > > - sdio->oob_irq_supported = true; > > - sdio->oob_irq_nr = irq; > > - sdio->oob_irq_flags = irqf; > > + return 0; > > .... > .... > > > /* Detach and free everything */ > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c > > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c > > index 9a105e6debe1f..f7db46ae44906 100644 > > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c > > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c > > @@ -1272,6 +1272,9 @@ static int brcmf_usb_probe_cb(struct > > brcmf_usbdev_info *devinfo, > > ret = -ENOMEM; > > goto fail; > > } > > + ret = PTR_ERR_OR_ZERO(devinfo->settings); > > + if (ret < 0) > > + goto fail; > > > > if (!brcmf_usb_dlneeded(devinfo)) { > > ret = brcmf_alloc(devinfo->dev, devinfo->settings); > > -- > > 2.34.1 > > > Reviewed-by: Sai Krishna <saikrishnag@marvell.com> > -- Best Regards Jacobe
On August 10, 2024 5:52:11 AM Jacobe Zang <jacobe.zang@wesion.com> wrote: > WiFi modules often require 32kHz clock to function. Add support to > enable the clock to PCIe driver and move "brcm,bcm4329-fmac" check > to the top of brcmf_of_probe. Change function prototypes from void > to int and add appropriate errno's for return values that will be > send to bus when error occurred. > > Co-developed-by: Ondrej Jirman <megi@xff.cz> > Signed-off-by: Ondrej Jirman <megi@xff.cz> > Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com> > Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> > Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> > --- > .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 +- > .../broadcom/brcm80211/brcmfmac/common.c | 3 +- > .../wireless/broadcom/brcm80211/brcmfmac/of.c | 53 +++++++++++-------- > .../wireless/broadcom/brcm80211/brcmfmac/of.h | 9 ++-- > .../broadcom/brcm80211/brcmfmac/pcie.c | 3 ++ > .../broadcom/brcm80211/brcmfmac/sdio.c | 24 ++++++--- > .../broadcom/brcm80211/brcmfmac/usb.c | 3 ++ > 7 files changed, 63 insertions(+), 36 deletions(-) [...] > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > index 6b38d9de71af6..461b7ff3be24b 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c [...] > @@ -4474,8 +4480,10 @@ struct brcmf_sdio *brcmf_sdio_probe(struct > brcmf_sdio_dev *sdiodev) > bus->brcmf_wq = wq; > > /* attempt to attach to the dongle */ > - if (!(brcmf_sdio_probe_attach(bus))) { > + probe_attach_result = brcmf_sdio_probe_attach(bus); There is no need for probe_attach_result anymore. Just use ret variable instead. > + if (probe_attach_result < 0) { > brcmf_err("brcmf_sdio_probe_attach failed\n"); > + ret = probe_attach_result; > goto fail; > }
On 8/10/2024 12:08 PM, jacobe.zang@wesion.com wrote: > > > On 2024/8/10 17:44, Sai Krishna Gajula <saikrishnag@marvell.com> wrote: >> >> > -----Original Message----- >> > From: Jacobe Zang <jacobe.zang@wesion.com> >> > Sent: Saturday, August 10, 2024 9:22 AM >> > To: robh@kernel.org; krzk+dt@kernel.org; heiko@sntech.de; >> > kvalo@kernel.org; davem@davemloft.net; edumazet@google.com; >> > kuba@kernel.org; pabeni@redhat.com; conor+dt@kernel.org; >> > arend.vanspriel@broadcom.com >> > Cc: efectn@protonmail.com; dsimic@manjaro.org; jagan@edgeble.ai; >> > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; >> linux- >> > rockchip@lists.infradead.org; linux-kernel@vger.kernel.org; >> > arend@broadcom.com; linux-wireless@vger.kernel.org; >> > netdev@vger.kernel.org; megi@xff.cz; duoming@zju.edu.cn; >> > bhelgaas@google.com; minipli@grsecurity.net; brcm80211@lists.linux.dev; >> > brcm80211-dev-list.pdl@broadcom.com; nick@khadas.com; Jacobe Zang >> > <jacobe.zang@wesion.com> >> > Subject: [PATCH v9 4/5] wifi: brcmfmac: Add optional lpo clock >> > enable support >> > >> > WiFi modules often require 32kHz clock to function. Add support to >> enable >> > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the >> top of >> > brcmf_of_probe. Change function prototypes from void to int and add >> > appropriate errno's for return >> > WiFi modules often require 32kHz clock to function. Add support to >> enable >> > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the >> top of >> > brcmf_of_probe. Change function prototypes from void to int and add >> > appropriate errno's for return values that will be send to bus when >> error >> > occurred. >> > >> > Co-developed-by: Ondrej Jirman <megi@xff.cz> >> > Signed-off-by: Ondrej Jirman <megi@xff.cz> >> > Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com> >> > Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> >> > Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> >> > --- >> > .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 +- >> > .../broadcom/brcm80211/brcmfmac/common.c | 3 +- >> > .../wireless/broadcom/brcm80211/brcmfmac/of.c | 53 >> +++++++++++-------- >> > .../wireless/broadcom/brcm80211/brcmfmac/of.h | 9 ++-- >> > .../broadcom/brcm80211/brcmfmac/pcie.c | 3 ++ >> > .../broadcom/brcm80211/brcmfmac/sdio.c | 24 ++++++--- >> > .../broadcom/brcm80211/brcmfmac/usb.c | 3 ++ >> > 7 files changed, 63 insertions(+), 36 deletions(-) >> > >> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >> > index 13391c2d82aae..b2ede4e579c5c 100644 >> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >> > @@ -947,8 +947,8 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev >> > *sdiodev) >> > >> > /* try to attach to the target device */ >> > sdiodev->bus = brcmf_sdio_probe(sdiodev); >> > - if (!sdiodev->bus) { >> > - ret = -ENODEV; >> > + if (IS_ERR(sdiodev->bus)) { >> > + ret = PTR_ERR(sdiodev->bus); >> > goto out; >> > } >> > brcmf_sdiod_host_fixup(sdiodev->func2->card->host); >> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >> > index b24faae35873d..58d50918dd177 100644 >> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >> > @@ -561,7 +561,8 @@ struct brcmf_mp_device >> > *brcmf_get_module_param(struct device *dev, >> > if (!found) { >> > /* No platform data for this device, try OF and DMI data */ >> > brcmf_dmi_probe(settings, chip, chiprev); >> > - brcmf_of_probe(dev, bus_type, settings); >> > + if (brcmf_of_probe(dev, bus_type, settings) == - >> > EPROBE_DEFER) >> > + return ERR_PTR(-EPROBE_DEFER); >> > brcmf_acpi_probe(dev, bus_type, settings); >> > } >> > return settings; >> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >> > index e406e11481a62..f19dc7355e0e8 100644 >> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >> > @@ -6,6 +6,7 @@ >> > #include <linux/of.h> >> > #include <linux/of_irq.h> >> > #include <linux/of_net.h> >> > +#include <linux/clk.h> >> > >> > #include <defs.h> >> > #include "debug.h" >> > @@ -65,17 +66,21 @@ static int brcmf_of_get_country_codes(struct device >> > *dev, >> > return 0; >> > } >> > >> > -void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, >> > - struct brcmf_mp_device *settings) >> > +int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, >> > + struct brcmf_mp_device *settings) >> > { >> > struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio; >> > struct device_node *root, *np = dev->of_node; >> > + struct clk *clk; >> > const char *prop; >> >> Small nit, please check if reverse x-mas tree order need to be follow >> here. >> >> > int irq; >> > int err; >> > u32 irqf; > > It can be seen from this line that there should be no need to follow the > reverse x-mas tree order. Because it is a struct variable, so place with > other struct ones. As driver maintainer I do not care about such neatness, but maybe Kalle has another preference. The code above looks fine to me. Regards, Arend
On 8/10/2024 12:08 PM, jacobe.zang@wesion.com wrote: > > > On 2024/8/10 17:44, Sai Krishna Gajula <saikrishnag@marvell.com> wrote: >> >> > -----Original Message----- >> > From: Jacobe Zang <jacobe.zang@wesion.com> >> > Sent: Saturday, August 10, 2024 9:22 AM >> > To: robh@kernel.org; krzk+dt@kernel.org; heiko@sntech.de; >> > kvalo@kernel.org; davem@davemloft.net; edumazet@google.com; >> > kuba@kernel.org; pabeni@redhat.com; conor+dt@kernel.org; >> > arend.vanspriel@broadcom.com >> > Cc: efectn@protonmail.com; dsimic@manjaro.org; jagan@edgeble.ai; >> > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; >> linux- >> > rockchip@lists.infradead.org; linux-kernel@vger.kernel.org; >> > arend@broadcom.com; linux-wireless@vger.kernel.org; >> > netdev@vger.kernel.org; megi@xff.cz; duoming@zju.edu.cn; >> > bhelgaas@google.com; minipli@grsecurity.net; brcm80211@lists.linux.dev; >> > brcm80211-dev-list.pdl@broadcom.com; nick@khadas.com; Jacobe Zang >> > <jacobe.zang@wesion.com> >> > Subject: [PATCH v9 4/5] wifi: brcmfmac: Add optional lpo clock >> > enable support >> > >> > WiFi modules often require 32kHz clock to function. Add support to >> enable >> > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the >> top of >> > brcmf_of_probe. Change function prototypes from void to int and add >> > appropriate errno's for return >> > WiFi modules often require 32kHz clock to function. Add support to >> enable >> > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the >> top of >> > brcmf_of_probe. Change function prototypes from void to int and add >> > appropriate errno's for return values that will be send to bus when >> error >> > occurred. >> > >> > Co-developed-by: Ondrej Jirman <megi@xff.cz> >> > Signed-off-by: Ondrej Jirman <megi@xff.cz> >> > Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com> >> > Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> >> > Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> >> > --- >> > .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 +- >> > .../broadcom/brcm80211/brcmfmac/common.c | 3 +- >> > .../wireless/broadcom/brcm80211/brcmfmac/of.c | 53 >> +++++++++++-------- >> > .../wireless/broadcom/brcm80211/brcmfmac/of.h | 9 ++-- >> > .../broadcom/brcm80211/brcmfmac/pcie.c | 3 ++ >> > .../broadcom/brcm80211/brcmfmac/sdio.c | 24 ++++++--- >> > .../broadcom/brcm80211/brcmfmac/usb.c | 3 ++ >> > 7 files changed, 63 insertions(+), 36 deletions(-) >> > >> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >> > index 13391c2d82aae..b2ede4e579c5c 100644 >> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >> > @@ -947,8 +947,8 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev >> > *sdiodev) >> > >> > /* try to attach to the target device */ >> > sdiodev->bus = brcmf_sdio_probe(sdiodev); >> > - if (!sdiodev->bus) { >> > - ret = -ENODEV; >> > + if (IS_ERR(sdiodev->bus)) { >> > + ret = PTR_ERR(sdiodev->bus); >> > goto out; >> > } >> > brcmf_sdiod_host_fixup(sdiodev->func2->card->host); >> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >> > index b24faae35873d..58d50918dd177 100644 >> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >> > @@ -561,7 +561,8 @@ struct brcmf_mp_device >> > *brcmf_get_module_param(struct device *dev, >> > if (!found) { >> > /* No platform data for this device, try OF and DMI data */ >> > brcmf_dmi_probe(settings, chip, chiprev); >> > - brcmf_of_probe(dev, bus_type, settings); >> > + if (brcmf_of_probe(dev, bus_type, settings) == - >> > EPROBE_DEFER) >> > + return ERR_PTR(-EPROBE_DEFER); >> > brcmf_acpi_probe(dev, bus_type, settings); >> > } >> > return settings; >> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >> > index e406e11481a62..f19dc7355e0e8 100644 >> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >> > @@ -6,6 +6,7 @@ >> > #include <linux/of.h> >> > #include <linux/of_irq.h> >> > #include <linux/of_net.h> >> > +#include <linux/clk.h> >> > >> > #include <defs.h> >> > #include "debug.h" >> > @@ -65,17 +66,21 @@ static int brcmf_of_get_country_codes(struct device >> > *dev, >> > return 0; >> > } >> > >> > -void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, >> > - struct brcmf_mp_device *settings) >> > +int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, >> > + struct brcmf_mp_device *settings) >> > { >> > struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio; >> > struct device_node *root, *np = dev->of_node; >> > + struct clk *clk; >> > const char *prop; >> >> Small nit, please check if reverse x-mas tree order need to be follow >> here. >> >> > int irq; >> > int err; >> > u32 irqf; > > It can be seen from this line that there should be no need to follow the > reverse x-mas tree order. Because it is a struct variable, so place with > other struct ones. As driver maintainer I do not care about such neatness, but maybe Kalle has another preference. The code above looks fine to me. Regards, Arend
Arend van Spriel <arend.vanspriel@broadcom.com> writes: > On 8/10/2024 12:08 PM, jacobe.zang@wesion.com wrote: > >> On 2024/8/10 17:44, Sai Krishna Gajula <saikrishnag@marvell.com> >> wrote: >>> >>> > -----Original Message----- >>> > From: Jacobe Zang <jacobe.zang@wesion.com> >>> > Sent: Saturday, August 10, 2024 9:22 AM >>> > To: robh@kernel.org; krzk+dt@kernel.org; heiko@sntech.de; >>> > kvalo@kernel.org; davem@davemloft.net; edumazet@google.com; >>> > kuba@kernel.org; pabeni@redhat.com; conor+dt@kernel.org; >>> > arend.vanspriel@broadcom.com >>> > Cc: efectn@protonmail.com; dsimic@manjaro.org; jagan@edgeble.ai; >>> > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; >>> linux- >>> > rockchip@lists.infradead.org; linux-kernel@vger.kernel.org; >>> > arend@broadcom.com; linux-wireless@vger.kernel.org; >>> > netdev@vger.kernel.org; megi@xff.cz; duoming@zju.edu.cn; >>> > bhelgaas@google.com; minipli@grsecurity.net; brcm80211@lists.linux.dev; >>> > brcm80211-dev-list.pdl@broadcom.com; nick@khadas.com; Jacobe Zang >>> > <jacobe.zang@wesion.com> >>> > Subject: [PATCH v9 4/5] wifi: brcmfmac: Add optional lpo clock >>> > enable support >>> > >>> > WiFi modules often require 32kHz clock to function. Add support >>> to enable >>> > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to >>> the top of >>> > brcmf_of_probe. Change function prototypes from void to int and add >>> > appropriate errno's for return >>> > WiFi modules often require 32kHz clock to function. Add support >>> to enable >>> > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to >>> the top of >>> > brcmf_of_probe. Change function prototypes from void to int and add >>> > appropriate errno's for return values that will be send to bus >>> when error >>> > occurred. >>> > >>> > Co-developed-by: Ondrej Jirman <megi@xff.cz> >>> > Signed-off-by: Ondrej Jirman <megi@xff.cz> >>> > Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com> >>> > Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> >>> > Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> >>> > --- >>> > .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 +- >>> > .../broadcom/brcm80211/brcmfmac/common.c | 3 +- >>> > .../wireless/broadcom/brcm80211/brcmfmac/of.c | 53 >>> +++++++++++-------- >>> > .../wireless/broadcom/brcm80211/brcmfmac/of.h | 9 ++-- >>> > .../broadcom/brcm80211/brcmfmac/pcie.c | 3 ++ >>> > .../broadcom/brcm80211/brcmfmac/sdio.c | 24 ++++++--- >>> > .../broadcom/brcm80211/brcmfmac/usb.c | 3 ++ >>> > 7 files changed, 63 insertions(+), 36 deletions(-) >>> > >>> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >>> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >>> > index 13391c2d82aae..b2ede4e579c5c 100644 >>> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >>> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c >>> > @@ -947,8 +947,8 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev >>> > *sdiodev) >>> > >>> > /* try to attach to the target device */ >>> > sdiodev->bus = brcmf_sdio_probe(sdiodev); >>> > - if (!sdiodev->bus) { >>> > - ret = -ENODEV; >>> > + if (IS_ERR(sdiodev->bus)) { >>> > + ret = PTR_ERR(sdiodev->bus); >>> > goto out; >>> > } >>> > brcmf_sdiod_host_fixup(sdiodev->func2->card->host); >>> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >>> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >>> > index b24faae35873d..58d50918dd177 100644 >>> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >>> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c >>> > @@ -561,7 +561,8 @@ struct brcmf_mp_device >>> > *brcmf_get_module_param(struct device *dev, >>> > if (!found) { >>> > /* No platform data for this device, try OF and DMI data */ >>> > brcmf_dmi_probe(settings, chip, chiprev); >>> > - brcmf_of_probe(dev, bus_type, settings); >>> > + if (brcmf_of_probe(dev, bus_type, settings) == - >>> > EPROBE_DEFER) >>> > + return ERR_PTR(-EPROBE_DEFER); >>> > brcmf_acpi_probe(dev, bus_type, settings); >>> > } >>> > return settings; >>> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >>> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >>> > index e406e11481a62..f19dc7355e0e8 100644 >>> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >>> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c >>> > @@ -6,6 +6,7 @@ >>> > #include <linux/of.h> >>> > #include <linux/of_irq.h> >>> > #include <linux/of_net.h> >>> > +#include <linux/clk.h> >>> > >>> > #include <defs.h> >>> > #include "debug.h" >>> > @@ -65,17 +66,21 @@ static int brcmf_of_get_country_codes(struct device >>> > *dev, >>> > return 0; >>> > } >>> > >>> > -void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, >>> > - struct brcmf_mp_device *settings) >>> > +int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, >>> > + struct brcmf_mp_device *settings) >>> > { >>> > struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio; >>> > struct device_node *root, *np = dev->of_node; >>> > + struct clk *clk; >>> > const char *prop; >>> >>> Small nit, please check if reverse x-mas tree order need to be >>> follow here. >>> >>> > int irq; >>> > int err; >>> > u32 irqf; >> It can be seen from this line that there should be no need to follow >> the reverse x-mas tree order. Because it is a struct variable, so >> place with other struct ones. > > As driver maintainer I do not care about such neatness, but maybe > Kalle has another preference. The code above looks fine to me. We haven't been strongly requiring reverse x-mas tree in wireless code, it has been just a preference. Also for me the code above looks fine.
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c index 13391c2d82aae..b2ede4e579c5c 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c @@ -947,8 +947,8 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) /* try to attach to the target device */ sdiodev->bus = brcmf_sdio_probe(sdiodev); - if (!sdiodev->bus) { - ret = -ENODEV; + if (IS_ERR(sdiodev->bus)) { + ret = PTR_ERR(sdiodev->bus); goto out; } brcmf_sdiod_host_fixup(sdiodev->func2->card->host); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c index b24faae35873d..58d50918dd177 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c @@ -561,7 +561,8 @@ struct brcmf_mp_device *brcmf_get_module_param(struct device *dev, if (!found) { /* No platform data for this device, try OF and DMI data */ brcmf_dmi_probe(settings, chip, chiprev); - brcmf_of_probe(dev, bus_type, settings); + if (brcmf_of_probe(dev, bus_type, settings) == -EPROBE_DEFER) + return ERR_PTR(-EPROBE_DEFER); brcmf_acpi_probe(dev, bus_type, settings); } return settings; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c index e406e11481a62..f19dc7355e0e8 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c @@ -6,6 +6,7 @@ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_net.h> +#include <linux/clk.h> #include <defs.h> #include "debug.h" @@ -65,17 +66,21 @@ static int brcmf_of_get_country_codes(struct device *dev, return 0; } -void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, - struct brcmf_mp_device *settings) +int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, + struct brcmf_mp_device *settings) { struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio; struct device_node *root, *np = dev->of_node; + struct clk *clk; const char *prop; int irq; int err; u32 irqf; u32 val; + if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac")) + return 0; + /* Apple ARM64 platforms have their own idea of board type, passed in * via the device tree. They also have an antenna SKU parameter */ @@ -105,7 +110,7 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, board_type = devm_kstrdup(dev, tmp, GFP_KERNEL); if (!board_type) { of_node_put(root); - return; + return 0; } strreplace(board_type, '/', '-'); settings->board_type = board_type; @@ -113,33 +118,39 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, of_node_put(root); } - if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac")) - return; - err = brcmf_of_get_country_codes(dev, settings); if (err) brcmf_err("failed to get OF country code map (err=%d)\n", err); of_get_mac_address(np, settings->mac); - if (bus_type != BRCMF_BUSTYPE_SDIO) - return; + if (bus_type == BRCMF_BUSTYPE_SDIO) { + if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) + sdio->drive_strength = val; - if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) - sdio->drive_strength = val; + /* make sure there are interrupts defined in the node */ + if (!of_property_present(np, "interrupts")) + return 0; - /* make sure there are interrupts defined in the node */ - if (!of_property_present(np, "interrupts")) - return; + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + brcmf_err("interrupt could not be mapped\n"); + return 0; + } + irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); + + sdio->oob_irq_supported = true; + sdio->oob_irq_nr = irq; + sdio->oob_irq_flags = irqf; + } - irq = irq_of_parse_and_map(np, 0); - if (!irq) { - brcmf_err("interrupt could not be mapped\n"); - return; + clk = devm_clk_get_optional_enabled(dev, "lpo"); + if (!IS_ERR_OR_NULL(clk)) { + brcmf_dbg(INFO, "enabling 32kHz clock\n"); + return clk_set_rate(clk, 32768); + } else { + return PTR_ERR_OR_ZERO(clk); } - irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); - sdio->oob_irq_supported = true; - sdio->oob_irq_nr = irq; - sdio->oob_irq_flags = irqf; + return 0; } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h index 10bf52253337e..ae124c73fc3b7 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h @@ -3,11 +3,12 @@ * Copyright (c) 2014 Broadcom Corporation */ #ifdef CONFIG_OF -void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, - struct brcmf_mp_device *settings); +int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, + struct brcmf_mp_device *settings); #else -static void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, - struct brcmf_mp_device *settings) +static int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, + struct brcmf_mp_device *settings) { + return 0; } #endif /* CONFIG_OF */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index 06698a714b523..c34405a6d38b8 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -2457,6 +2457,9 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) ret = -ENOMEM; goto fail; } + ret = PTR_ERR_OR_ZERO(devinfo->settings); + if (ret < 0) + goto fail; bus = kzalloc(sizeof(*bus), GFP_KERNEL); if (!bus) { diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 6b38d9de71af6..461b7ff3be24b 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -3943,7 +3943,7 @@ static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = { .write32 = brcmf_sdio_buscore_write32, }; -static bool +static int brcmf_sdio_probe_attach(struct brcmf_sdio *bus) { struct brcmf_sdio_dev *sdiodev; @@ -3953,6 +3953,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) u32 reg_val; u32 drivestrength; u32 enum_base; + int ret = -EBADE; sdiodev = bus->sdiodev; sdio_claim_host(sdiodev->func1); @@ -4001,8 +4002,9 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) BRCMF_BUSTYPE_SDIO, bus->ci->chip, bus->ci->chiprev); - if (!sdiodev->settings) { + if (IS_ERR_OR_NULL(sdiodev->settings)) { brcmf_err("Failed to get device parameters\n"); + ret = PTR_ERR_OR_ZERO(sdiodev->settings); goto fail; } /* platform specific configuration: @@ -4071,7 +4073,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) /* allocate header buffer */ bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL); if (!bus->hdrbuf) - return false; + return -ENOMEM; /* Locate an appropriately-aligned portion of hdrbuf */ bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0], bus->head_align); @@ -4082,11 +4084,11 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) if (bus->poll) bus->pollrate = 1; - return true; + return 0; fail: sdio_release_host(sdiodev->func1); - return false; + return ret; } static int @@ -4446,13 +4448,16 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) struct brcmf_sdio *bus; struct workqueue_struct *wq; struct brcmf_fw_request *fwreq; + int probe_attach_result; brcmf_dbg(TRACE, "Enter\n"); /* Allocate private bus interface state */ bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC); - if (!bus) + if (!bus) { + ret = -ENOMEM; goto fail; + } bus->sdiodev = sdiodev; sdiodev->bus = bus; @@ -4467,6 +4472,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) dev_name(&sdiodev->func1->dev)); if (!wq) { brcmf_err("insufficient memory to create txworkqueue\n"); + ret = -ENOMEM; goto fail; } brcmf_sdiod_freezer_count(sdiodev); @@ -4474,8 +4480,10 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) bus->brcmf_wq = wq; /* attempt to attach to the dongle */ - if (!(brcmf_sdio_probe_attach(bus))) { + probe_attach_result = brcmf_sdio_probe_attach(bus); + if (probe_attach_result < 0) { brcmf_err("brcmf_sdio_probe_attach failed\n"); + ret = probe_attach_result; goto fail; } @@ -4546,7 +4554,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) fail: brcmf_sdio_remove(bus); - return NULL; + return ERR_PTR(ret); } /* Detach and free everything */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c index 9a105e6debe1f..f7db46ae44906 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c @@ -1272,6 +1272,9 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo, ret = -ENOMEM; goto fail; } + ret = PTR_ERR_OR_ZERO(devinfo->settings); + if (ret < 0) + goto fail; if (!brcmf_usb_dlneeded(devinfo)) { ret = brcmf_alloc(devinfo->dev, devinfo->settings);